TS1398 I have a home network and my IPad was working fine on that network untill last week and now I have no connection. please help!
I was connected to my home network on my IPad and for some reason no longer working?
Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Similar Messages
-
changes since new site running All of which worked fine before:
clicking back button now asks if I really want to leave the current page and logs me out.
They report my browser is not supported.
Times out even though I am actively using the site.
When I try to send a secure message it wipes out what I am still typing and says it is not the right sort of thing to put in a message.Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
I was able to use the findmyiphone app last week, but now I have been getting an error message "Can't load findmyiphone. There was a problem loading the application." please help as we are trying to locate an ipod with pics of a no deceased loved one.
Had the same problem and the same message -- was suddenly unable to access icloud apps on my pc, also using Windows 7 and Internet Explorer. After several days of pulling my hair out, decided to try a different browser and was able to get in by using Firefox instead of Internet Explorer. Hope this helps.
-
My iPad was working fine until Tues. Night. I went to go on facebook and it shows a white page like it is coming on the it goes back to the home page. I have turned it off, deleted Facebook and put it back on but it still does the same thing. What can I do?
Morning DeeHutton,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Best of luck,
Mario -
Hi there
I ha
Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an error is there a way to get the phone working again please.Shame you had the iPhone hacked as O2 usually unlock their customers iPhones happily.
We cannot discuss your problem as it is in breach of the Ts&Cs you agreed to on registering
However hint ....you have probably trashed it -
I have an Ipad 2 that I use to view an IP camera over a Wifi network. The Ipad is in a vehicle that leaves the Wifi range and then returns to the range. Upon returning to the range, the Ipad has trouble connecting to the network. (30 seconds) The Ipad will eventually connect to the network, but by this time the driver is frustrated. I have moved the antenna to within 20' of where the vehicle comes to a stop. My Iphone does not have a problem connecting or reconnecting when used side by side with the Ipad. Both the Ipad and Iphone have Otter box covers. Has anyone run into this problem or have any suggestions?
30 seconds to reconnect to a WiFi network is not unusual, especially in an environment where other radio signals on similar frequencies are present. Sorry about that.
You might get better times by letting the WiFi base station pick another channel. But you might not. -
i had recently followed orders to restore my iPhone 3gs (iOS 6.1) from a question on apple support. However it was working fine before that, it's just that my phone didn't have signal. So it said to restore my iPhone and now it says that the Activation server is temporarily unavailable and when i plugged it into my mac, it said that i ddn't have a sim card installed. What can I do to fix this besides bring it to the store? it also bugs me because this answer was supposed to work but it just messed my phone up even more. This has already happened once and i had to take it to the store. What should I do to fix this? Thank you so much for all answers. i really appreciate.
no so i dont know what happened
-
I have an iphone 4s that i got last week and i set it up just using the phone. today my dad restored it as my mothers iphone so i lost all of my data. I tried to restore it as my original phone i had but i exited out of itunes and now my phone wont showup in itunes or on my computer
Did you fail to import them to your computer before restoring?
Not good.
They are likely gone.
You can try restoring from backup. -
Hi, I have a freecom 1TB hard drive which was working fine until it froze. I pulled it out (mistake I now know) and now it doesn't mount. It shows up in Disk Utility but won't manually mount. When I try to repair it gives message 'failed on exit'. Some people have said to try Disk Warrior, but at $100 it's quite expensive maybe fix. help!
You likely need to reformat the drive which will destroy all data and you need a backup to restore it. If no backup is present then a data retrieval service can be more expensive than DiskWarrior. There is software that can rescue the data but I can not vouch for it's effectiveness as I have always maintained backups. .
http://www.prosofteng.com/
http://www.wondershare.net/ad/data-recovery-mac.html?gclid=CLTp3Mj07rkCFevm7AodL lUAHw
http://diskdoctors.com/software/mac-data-recovery/utility.asp?gclid=CMyf_MH17rkC Fcvm7AodSE0A8A
http://www.cleverfiles.com/ -
i have installed photoshop illustrator on mac which is working fine but update online is grew out and not able to update
Hi Team,
The option to disable to update is chosen by your IT admin when he created the package.
The IT Admin can re-enable the update by following the link below:
Disable auto-updates | Application Manager | IT administrators
Cheers!
md -
Note 3 won't answer a call by using the "answer" voice command. Other voice commands work fine (ie 'volume up') and speech to text works fine. Tried it in the car and in a quiet room at home. What am I missing?
Rodilator,
We'll figure this out together! Can you please walk us through the exact steps you're taking to answer a call when it comes in?
SarahO_VZW
Follow us on Twitter @VZWSupport -
Apple TV3 doesn't start automatically when I select airplay from my iMac (Yosemite) and Ipad 3( iOS 8.1.3) i have to manually turn it on then it works fine after that! what is wrong with which setting.
You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
https://discussions.apple.com/message/23957654#23957654
Peace
Harry -
So I just bought an iPhone 5s and Touch ID was working fine until the software update is that a bug ? Because I don't think my home button broke
Have not heard of that but here is what I would do - test after each step to see if the problem is solved
1. Restart or reset your iPhone, iPad, or iPod touch - Apple Support
2. If that does not work - back up to iTunes and restore to factory settings
3. Check to see if the problem is resolved before restoring from backup -
I just got my ipad. It was working fine. suddenly I tried to use it and it wont turn on. The battery is fine.
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. Happened to me once, about 6 months ago, and a reset got it working again.
-
Ipad was working fine and now has black screen and wont turn off or on or do anything
Ipad was working fine and now is a black screen. Won't do anything now
Is it charged? If not charge it with the supplied charger.
If charged, have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.
Maybe you are looking for
-
Order related inter company credit memo - Order status 'Not Invoiced'
Hi, We have recently created 'Order related inter company credit memo' process for return Stock Transport Orders(STO). For this, we used order related billing (billing relevance = C i.e. Relevant for ord.-related billing - status acc.to target qty) w
-
How to "reset" my firewire 400 port?
Hi; Been recently having issues with my Motu audio interface (hooked up through firewire). It constantly turns on and off, and been trying to troubleshoot it. It seems this only happens when I hook it up to my iMac. It works fine with other macs. I s
-
Problem upgrading to 3.2
We currently have a high availability (mysql cluster) setup with one primary vda host and two secondaries... all running 3.1 for the moment. I went to upgrade these servers to 3.2 and so I started by running "vda-preserve" on all 3 hosts in the order
-
Hi, Just recently I downloaded the latest version of Java: J2SE 5.0. Well, contrary to all their promises of performance enhancement it has slowed down my J2ee server unbelievably. I run Orion server 2.02 on both windows and Linux platforms. Pages th
-
How do I get my camera roll back following iOS 8 upgrade?
how do I get my camera roll back following iOS 8 upgrade?