TS1398 My ipod has internet downstairs but when i go upstairs, i have no internet. Can someone help me?

I have a router downstairs in my house. When i go downstairs, i have internet. But when i go back upstairs, i lose my internet and my ipod cant connect to the internet untill i go back downstairs. Can someone help me with this dalema?

Have the same problem with one room in my house. The good news; my internet provider told me about a device which boosts the signal through the the houses wiring. You plug the sender into an electrical outlet and your USB output, the receiver / transmitter you plug into an outlet in the room with the poor signal and use Wi-Fi as always. It priced in around $30 to $40. The bad news; I just don't remember what it was called, but I'm sure if contact your provider or local electronics store, discribe what your looking for they can hook you up with the needed hardware. Hope this helps, Good luck.

Similar Messages

My Iphone4 charges when The battery has fully died but when its on the lighting bolt does not appear. "Help"!

My Iphone4 charges when The battery has fully died but when its on the lighting bolt does not appear. "Help"!

Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
Suggest that you take full advantage of the above.

I have a mac book pro and have already downloaded adobe flash player. However when i go to watch a video it says "Block Plug In". But my adobe is already up to date. Can someone help me to fix this so i can watch videos?

I have a mac book pro and have already downloaded adobe flash player. However when i go to watch a video it says "Blocked Plug In". But my adobe is already up to date. Can someone help me to fix this so i can watch videos?

If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 7. Back up all data before making any changes.
Step 1
You might have to log out or reboot before a Flash update takes effect.
Step 2
In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
If you get a warning of a "blocked" or "outdated" plug-in, then from the menu bar select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch the browser.
If the warning persists, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 6
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 7
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 8
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.

HT201406 iPod has a white screen. Tried fix suggestions. Nothing works. Can you help?

iPod has a white screen. Tried fix suggestions. Nothing works. Can you help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iphone 4s has switched off and will not switch back on even when its connected to power charger or laptop. can someone help please

My iphone 4s has switched off and will not switch back on even when its connected to power charger or laptop. can someone help please

Just read that someone had the same problem on 3gs and someone had replied to press the home button and power button at same time, so I tried this and within a few seconds my phone had switched itself back on.

HT5622 I want to change my security information so I went to "Manage your Apple ID" but I could not find "Reset your security information" can someone help me to change my security answers. Thanks in advance

Hello Everyone,
I want to change my security information so I went to "Manage your Apple ID" but I could not find "Reset your security information" can someone help me to change my security answers.
Thanks in advance

call 1-800-275-2273 (1-800-MY-APPLE)

I have just updated my mac but now I am unable to open my itunes can someone help me please

I have just updated my mac but now I am unable to open my itunes can someone help me please

This worked for me:
1 Go to the finder menu bar at the top of the screen
2Click go
3 click applications
4 go down to iTunes and right click on Show Package Contents
5 open contents folder then go to mac os folder
6 open the terminal marked iTunes in that folder
This should force it to open and function enough, it will not allow importing of music from a desk top

Ipod touch icons/pictograms won't open by touching, only a voice speaking. can someone help please?

ipod touch icons/pictograms won't open by touching, only a voice speaking. can someone help please

Connect the iPod to your computer (USB or wifi) and turn VO off via iTunes. See:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)

Why I got this email if I didn't schedule any storage plan ? This is the email I got; On 10/07/2013 you are scheduled to be charged $20.00 for your 10 GB iCloud storage plan, but there is a problem with your payment information, Can someone help me

Why I got this email if I didn't schedule any storage plan ? This is the email I got;
On 10/07/2013 you are scheduled to be charged $20.00 for your 10 GB iCloud storage plan, but there is a problem with your payment information, Can someone help me ? I don't want to be charge for something I don't want to buy.

You may want to do couple things
1. cancel auto renewal for icloud - instructions here -under downgrade storage
http://support.apple.com/kb/HT4874
2. change your payment info in itunes, to either none or other payment method - instructions here
http://support.apple.com/kb/ht1918

I have a VI A. I want A to call another VI B and execute. After B executes, I want it to close automatically and go back to A. Is this possible ? I tried using open reference and those methods, but I am not able to do it. Can someone help me ? Thanks !

Thanks !
Kudos always welcome for helpful posts

Re: I have a VI A. I want A to call another VI B and execute. After B executes, I want it to close automatically and go back to A. Is this possible ? I tried using open reference and those methods, but I am not able to do it. Can someone help me ? Thanks !Hi Stephan ! Thanks ! I guess I explained my question not so right. I've created a customized menu and at the instance of me selecting a menu, a VI should load itself dynamically. I am using call by reference. Sometimes it works and sometimes it won't. In short, what I want to achieve is load VIs dynamically and close them dynamically once they finish executing. Thanks !
Kudos always welcome for helpful posts

My little brother lock my ipod touch 5th generation. Now he wont tell me the password. Can someone help me. What can i do?? Please help me???????

My little brother lock my ipod touch 5th generation. Now he wont tell me the password. Can someone help me. What can i do?? Please help me???????

You would need to put it in recover mode:
iOS: Unable to update or restore - Support - Apple

HT4623 I cannot install my ipod to my computer. Says something about the device driver. I did not get it new either and so have no info about it. And I have never used one before and have no friends who have either. Can someone help me?

I cannot install my ipod to my computer. Says something about the device driver. I did not get it new either and so have no info about it. And I have never used one before and have no friends who have either. Can someone help me?

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

I just purchased a new I-pod touch and It was not synced to itunes yet. My lil sister attempted to put in a passcode but disabled it; now I cannot get in. Can someone help me. I tried to restore it but when I came down to the passcode again it was disable

Can anyone assist me, because I am about to hurt my lil sister. I purchase a new Ipod touch yesterday and I have not synced it to itunes yet. She attempted to set up a passcode and disabled it. I tried to restore the Ipod but when the passcode came up again I came back to the same thing. Disabled! Can someone help me pleeeease!!!

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

My ipod touch 5 turn its self off and wont come back on please can someone help

my ipod touch turned its self off Last night had half of battery left and I cant turn it back on please can someone help cant live with out it

Have you tried to reset it? Hold down the sleep and home keys for about 20 seconds. If you see the silver apple, let go and let it reboot and see if it comes back

I want to update my OS from X10.6.8 to the next level but I don't know what that is. Can someone help?

I want to update my OS from X10.6.8 to the next level but I don't know what that is. Can someone tell me the next version to us? Thanks.

Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
             Identifier 5,1 or later.
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
         7. Xserve (Early 2009) - Model Identifier 3,1 or later.
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

TS1398 My ipod has internet downstairs but when i go upstairs, i have no internet. Can someone help me?

Similar Messages

Maybe you are looking for