TS1398 My wifi can only connect up to 50cm radius which is really small..
After i update to ios 6.1.3 i cannot connect to wifi unless i'm as close as 50centimeter.. Ios problem?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Similar Messages
-
TS1398 i have trouble connecting to wifi i can only connect from less than a feet from my router
i have a iphone4 and i am haveing trouble conneting to wifi can only connect to wireless router from one feet away
Hi there,
You may want to take a look at the troubleshootings steps found in the article below.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
-Griff W. -
did update to iOS 7 now I can't access FaceTime , says can connect to network , I am connected to wifi can only see my Ipad on find my iPhone can't locate my iPhone 5 though?
Hi, Abril_Perez17.
This may be related to a new feature embedded in iOS7 that shows all purchased music by default. Go to Settings > Music, then turn off Show All Music. See if the issue ceases once the feature has been disabled. This information is located on page 63 of the user guide below.
iPhone User Guide
Regards,
Jason H. -
i have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.
Try changing the channel in use in case you're getting interference.
If you have WEP enabled on the Internet Sharing it'ss worth disabling it whilst troubleshooting the connectivity issues.
mrtotes -
To save battery, I leave my wifi off when the TP's screen is locked. At home, my TP has no problem reconnecting to wifi after the screen is unlocked. However, at work, which uses enterprise wifi, I can only connect the first time. If I lock the screen and then unlock it (causing the wifi to turn off and on again) then the TP will not reconnect and I would get the "Association failed" error over and over again. If I were to turn the TP off and on again, I would still get the same error. Here's the strange part, if I come in work the next day, it would be able to connect to the wifi. If I were to leave the wifi on all the time, it would not disconnect even if I lock the screen. Now if I were to turn off the wifi and then turn it on again, the TP would not reconnect. So it seems like the TP can only connect the first time each day....very strange...and frustrating.
Post relates to: HP TouchPad (WiFi)Scimmia is right. But you AcousticBruce are still very wrong. You claim there were no error messages. Yet after much proding and denial you finally provide small portions of error messages which fully identify the problem and can be found in many other posts in these forums. Yet still, you haven't actually provided full output - instead you paraphrased the output after a couple of "//" symbols.
If you don't give us the actual output we can't help - except in this case the error is so common we could very easily help. So could the wiki page on wpa_supplicant if you had read it, as your problem is explictly listed there in a "NOTE" box. But more importantly if you are reluctant to give us actual output we will not want to help you.
This issue would have been solved instantly if you would have provided the actual output instead of lying about it.
The relevant wiki pages:
https://wiki.archlinux.org/index.php/WP … passphrase
https://wiki.archlinux.org/index.php/He … er_or_root
And the related forums posts found after just a quick search of that error message that you finally provided:
https://bbs.archlinux.org/viewtopic.php?id=167244
https://bbs.archlinux.org/viewtopic.php?id=184824
https://bbs.archlinux.org/viewtopic.php?id=178909
https://bbs.archlinux.org/viewtopic.php?id=190097
https://bbs.archlinux.org/viewtopic.php?id=191351
https://bbs.archlinux.org/viewtopic.php?id=191964
Last edited by Trilby (2015-05-18 11:08:44) -
Can only connect to HTTPS (secure) sites and can't connect to HTTP sites
In short I CAN ONLY connect to HTTPS sites, meaning secure.
I've narrowed this down to an issue regrading my mac book pro and the wireless router.
Router:
- not sure of the make model
- other computers CAN connect to this router and go online
My Mac:
- Mac Book Pro
- OS X 10.6
- I can connect to other wireless networks just fine
- I can surf the web for about 10 minutes or so then it blocks ALL http traffic
and i'm only allowed to https sites
going to a http site results in a "page is taking to long to respond"
please anything?The router is a Verizon MI424WR
hope that helps, but i doubt it will...
just to also clairfy http sites either go really slow then time out only never to come back, https are blazing fast -
Can only connect to Internet from one computer at a time on network
I have a 2 computer network in my office networked with an Asante 10/100 hub. The computers are a iMac 24 (Intel) and an old G4 (PCI). The network has worked fine until just recently. Now, I can only connect to the Internet with one computer at a time...(DSL connection). I checked cables, ports, etc, and I'm wondering if this is a 10.4.9 issue. Coincidentally, I noticed that I am not able to access the Internet via Win XP using Parallels which also worked fine up until recently. I checked with the ISP (AT&T) who confirmed that all is OK on their end. Anyone have similar problem? Could OS X 10.4.9 be the culprit? Any help on this will be much appreciated. Thanks.
iMac 24 Mac OS X (10.4.9) 2G RAM; NVIDIA GeForce 7600 GT 256I'd consider that a 3 computer network, Parallels being a virtual machine would alias the ethernet interface and need its own IP address. That may or may not have anything to do with your problem. Actually, the way you've described things, it sounds like a lot has to do with your contract with ATT. Is there a routing device at your end?
The only way 10.4.9 could be the culprit would be if it were the routing device.
-Phil -
Can only connect one user at a time via VPN?
Hi, long-term Mac user but new to OS X Server. Dug thru the forums quite a bit but couldn't find an answer to this one - hopefully I wasn't searching with the wrong keywords.
Installed OS X Server 10.6 on a MacBook (white, 1 generation back) at the office. Sits behind an Airport Extreme, which is connected to Comcast. Other machines at the office are NOT routed through the Server, but rather connect directly to the Airport Extreme for internet access. I've set up server.mydomainname.com to point to our Comcast address, and I am able to connect via VPN to the server without any problems, and access the server using the server.mydomainname.com address which I pointed to my Comcast IP address, as long as I check "Send all traffic over VPN connection" on my client.
However, when I'm logged in via VPN on one computer, and then log in via VPN on another computer (with the same UID or a different one), the first one loses all connectivity through the VPN - it's as if it had been logged off.
In Server Admin, under the Settings|Network tabs, I have Computer Name set up as "theserver", and Local Hostname as "theserver" (so I can access via theserver.private). VPN is set up to enable L2TP over IPsec, sharing ranges 10.0.1.200 thru 10.0.1.220; no load balancing, no PPTP. Client DNS servers is set to 10.0.1.29.
Any ideas as to why I can only connect with one client at a time?Thanks. I didn't see anything interesting, but then again I'm not up on VPN details. Here's the scenario:
First, I logged in as "user1", and I can use the VPN.
Then, I logged in as "user2", and I can use the VPN with user2, but user1 is no longer able to do anything over the VPN.
Then I hung up with user2, but user1 still can't see anything over the VPN.
Then I hung up and reconnected with user1, and user1 can use the VPN again.
Here's part of the log for this activity. I've replaced potentially identifying info with "XYZ" for safety. Appreciate any thoughts on this!
Tue Oct 19 07:33:08 2010 : L2TP received ICCN
Tue Oct 19 07:33:08 2010 : L2TP connection established.
Tue Oct 19 07:33:08 2010 : using link 1
Tue Oct 19 07:33:08 2010 : Using interface ppp1
Tue Oct 19 07:33:08 2010 : Connect: ppp1 <--> socket[34:18]
Tue Oct 19 07:33:08 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
Tue Oct 19 07:33:08 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
Tue Oct 19 07:33:08 2010 : lcp_reqci: returning CONFACK.
Tue Oct 19 07:33:08 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
Tue Oct 19 07:33:08 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
Tue Oct 19 07:33:08 2010 : sent [LCP EchoReq id=0x0 magic=XYZ]
Tue Oct 19 07:33:08 2010 : sent [CHAP Challenge id=0x18 <XYZ>, name = "myserver.private"]
Tue Oct 19 07:33:08 2010 : rcvd [LCP EchoReq id=0x0 magic=XYZ]
Tue Oct 19 07:33:08 2010 : sent [LCP EchoRep id=0x0 magic=XYZ]
Tue Oct 19 07:33:08 2010 : rcvd [LCP EchoRep id=0x0 magic=XYZ]
Tue Oct 19 07:33:08 2010 : rcvd [CHAP Response id=0x18 <XYZ>, name = "user2"]
Tue Oct 19 07:33:08 2010 : sent [CHAP Success id=0x18 "S=XYZ M=Access granted"]
Tue Oct 19 07:33:08 2010 : CHAP peer authentication succeeded for user2
Tue Oct 19 07:33:08 2010 : DSAccessControl plugin: User 'user2' authorized for access
Tue Oct 19 07:33:08 2010 : sent [IPCP ConfReq id=0x1 <addr 10.0.1.29>]
Tue Oct 19 07:33:08 2010 : sent [ACSCP ConfReq id=0x1]
Tue Oct 19 07:33:08 2010 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Tue Oct 19 07:33:08 2010 : ipcp: returning Configure-NAK
Tue Oct 19 07:33:08 2010 : sent [IPCP ConfNak id=0x1 <addr 10.0.1.213> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
Tue Oct 19 07:33:08 2010 : rcvd [IPV6CP ConfReq id=0x1 <addr XYZ>]
Tue Oct 19 07:33:08 2010 : Unsupported protocol 0x8057 received
Tue Oct 19 07:33:08 2010 : sent [LCP ProtRej id=0x2 80 47 01 01 00 0f 01 0a 02 1b 63 ff fe a0 dd da]
Tue Oct 19 07:33:08 2010 : rcvd [ACSCP ConfReq id=0x1 <ms-dns1 0.0.0.1> <ms-dns1 0.0.0.1>]
Tue Oct 19 07:33:08 2010 : sent [ACSCP ConfRej id=0x1 <ms-dns1 0.0.0.1>]
Tue Oct 19 07:33:08 2010 : rcvd [IPCP ConfAck id=0x1 <addr 10.0.1.29>]
Tue Oct 19 07:33:08 2010 : rcvd [ACSCP ConfAck id=0x1]
Tue Oct 19 07:33:08 2010 : rcvd [IPCP ConfReq id=0x2 <addr 10.0.1.213> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
Tue Oct 19 07:33:08 2010 : ipcp: returning Configure-ACK
Tue Oct 19 07:33:08 2010 : sent [IPCP ConfAck id=0x2 <addr 10.0.1.213> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
Tue Oct 19 07:33:08 2010 : ipcp: up
Tue Oct 19 07:33:08 2010 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: 10.0.1.29), current interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
Tue Oct 19 07:33:08 2010 : found interface en0 for proxy arp
Tue Oct 19 07:33:08 2010 : local IP address 10.0.1.29
Tue Oct 19 07:33:08 2010 : remote IP address 10.0.1.213
Tue Oct 19 07:33:08 2010 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: 10.0.1.29), current interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
Tue Oct 19 07:33:08 2010 : rcvd [ACSCP ConfReq id=0x2 <ms-dns1 0.0.0.1>]
Tue Oct 19 07:33:08 2010 : sent [ACSCP ConfAck id=0x2 <ms-dns1 0.0.0.1>]
Tue Oct 19 07:33:08 2010 : sent [ACSP data <payload len 26, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
<domain: name XYZ>]
Tue Oct 19 07:33:08 2010 : rcvd [IP data <src addr 10.0.1.213> <dst addr 255.255.255.255> <BOOTP Request> <type INFORM> <client id 0x08000000010000> <parameters = 0x6 0x2c 0x2b 0x1 0xf9 0xf>]
Tue Oct 19 07:33:08 2010 : sent [IP data <src addr 10.0.1.29> <dst addr 10.0.1.213> <BOOTP Reply> <type ACK> <server id 0x0a00011d> <domain name "XYZ">]
Tue Oct 19 07:33:08 2010 : rcvd [ACSP data <payload len 0, packet seq 0, CI_DOMAINS, flags: ACK>]
Tue Oct 19 07:33:34 2010 : rcvd [LCP TermReq id=0x2 "User request"]
Tue Oct 19 07:33:34 2010 : LCP terminated by peer (User request)
Tue Oct 19 07:33:34 2010 : ipcp: down
Tue Oct 19 07:33:34 2010 : l2tpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.29), deleted interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
Tue Oct 19 07:33:34 2010 : sent [LCP TermAck id=0x2]
Tue Oct 19 07:33:34 2010 : l2tpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.29), deleted interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
Tue Oct 19 07:33:34 2010 : L2TP received CDN
Tue Oct 19 07:33:34 2010 : Connection terminated.
Tue Oct 19 07:33:34 2010 : Connect time 0.5 minutes.
Tue Oct 19 07:33:34 2010 : Sent 777000 bytes, received 105388 bytes.
Tue Oct 19 07:33:34 2010 : L2TP disconnecting...
Tue Oct 19 07:33:34 2010 : L2TP disconnected
2010-10-19 07:33:34 PDT --> Client with address = 10.0.1.213 has hungup
Tue Oct 19 07:33:50 2010 : rcvd [LCP TermReq id=0x3 "User request"]
Tue Oct 19 07:33:50 2010 : LCP terminated by peer (User request)
Tue Oct 19 07:33:50 2010 : ipcp: down
Tue Oct 19 07:33:50 2010 : sent [LCP TermAck id=0x3]
Tue Oct 19 07:33:50 2010 : l2tpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.29), deleted interface setting (name: ppp0, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.214).
Tue Oct 19 07:33:50 2010 : L2TP received CDN
Tue Oct 19 07:33:50 2010 : Connection terminated.
Tue Oct 19 07:33:50 2010 : Connect time 3.5 minutes.
Tue Oct 19 07:33:50 2010 : Sent 625383 bytes, received 225586 bytes.
Tue Oct 19 07:33:50 2010 : L2TP disconnecting...
Tue Oct 19 07:33:50 2010 : L2TP disconnected
2010-10-19 07:33:50 PDT --> Client with address = 10.0.1.214 has hungup
2010-10-19 07:33:59 PDT Incoming call... Address given to client = 10.0.1.216
Tue Oct 19 07:33:59 2010 : Directory Services Authentication plugin initialized
Tue Oct 19 07:33:59 2010 : Directory Services Authorization plugin initialized
Tue Oct 19 07:33:59 2010 : L2TP incoming call in progress from 'XYZ'...
Tue Oct 19 07:33:59 2010 : L2TP received SCCRQ
Tue Oct 19 07:33:59 2010 : L2TP sent SCCRP
Tue Oct 19 07:33:59 2010 : L2TP received SCCCN
Tue Oct 19 07:33:59 2010 : L2TP received ICRQ
Tue Oct 19 07:33:59 2010 : L2TP sent ICRP
Tue Oct 19 07:33:59 2010 : L2TP received ICCN
Tue Oct 19 07:33:59 2010 : L2TP connection established.
Tue Oct 19 07:33:59 2010 : using link 0
Tue Oct 19 07:33:59 2010 : Using interface ppp0
Tue Oct 19 07:33:59 2010 : Connect: ppp0 <--> socket[34:18]
Tue Oct 19 07:33:59 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
Tue Oct 19 07:33:59 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
Tue Oct 19 07:33:59 2010 : lcp_reqci: returning CONFACK.
Tue Oct 19 07:33:59 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
Tue Oct 19 07:33:59 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
Tue Oct 19 07:33:59 2010 : sent [LCP EchoReq id=0x0 magic=XYZ]
Tue Oct 19 07:33:59 2010 : sent [CHAP Challenge id=0xf1 <XYZ>, name = "myserver.private"]
Tue Oct 19 07:33:59 2010 : rcvd [LCP EchoReq id=0x0 magic=XYZ]
Tue Oct 19 07:33:59 2010 : sent [LCP EchoRep id=0x0 magic=XYZ]
Tue Oct 19 07:33:59 2010 : rcvd [LCP EchoRep id=0x0 magic=XYZ]
Tue Oct 19 07:33:59 2010 : rcvd [CHAP Response id=0xf1 <XYZ>, name = "user1"]
Tue Oct 19 07:34:00 2010 : sent [CHAP Success id=0xf1 "S=XYZ M=Access granted"]
Tue Oct 19 07:34:00 2010 : CHAP peer authentication succeeded for user1
Tue Oct 19 07:34:00 2010 : DSAccessControl plugin: User 'user1' authorized for access
Tue Oct 19 07:34:00 2010 : sent [IPCP ConfReq id=0x1 <addr 10.0.1.29>]
Tue Oct 19 07:34:00 2010 : sent [ACSCP ConfReq id=0x1]
Tue Oct 19 07:34:00 2010 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Tue Oct 19 07:34:00 2010 : ipcp: returning Configure-NAK
Tue Oct 19 07:34:00 2010 : sent [IPCP ConfNak id=0x1 <addr 10.0.1.216> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
Tue Oct 19 07:34:00 2010 : rcvd [IPV6CP ConfReq id=0x1 <addr XYZ>]
Tue Oct 19 07:34:00 2010 : Unsupported protocol 0x8057 received
Tue Oct 19 07:34:00 2010 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 02 1b 63 ff fe 99 35 cb]
Tue Oct 19 07:34:00 2010 : rcvd [LCP ProtRej id=0x2 82 35 01 01 00 04]
Tue Oct 19 07:34:00 2010 : rcvd [IPCP ConfAck id=0x1 <addr 10.0.1.29>]
Tue Oct 19 07:34:00 2010 : rcvd [IPCP ConfReq id=0x2 <addr 10.0.1.216> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
Tue Oct 19 07:34:00 2010 : ipcp: returning Configure-ACK
Tue Oct 19 07:34:00 2010 : sent [IPCP ConfAck id=0x2 <addr 10.0.1.216> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
Tue Oct 19 07:34:00 2010 : ipcp: up
Tue Oct 19 07:34:00 2010 : found interface en0 for proxy arp
Tue Oct 19 07:34:00 2010 : local IP address 10.0.1.29
Tue Oct 19 07:34:00 2010 : remote IP address 10.0.1.216
Tue Oct 19 07:34:00 2010 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: 10.0.1.29), current interface setting (name: ppp0, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.216).
Tue Oct 19 07:34:00 2010 : rcvd [IP data <src addr 10.0.1.216> <dst addr 255.255.255.255> <BOOTP Request> <type INFORM> <client id 0x08000000010000> <parameters = 0x6 0x2c 0x2b 0x1 0xf9 0xf>]
Tue Oct 19 07:34:00 2010 : sent [IP data <src addr 10.0.1.29> <dst addr 10.0.1.216> <BOOTP Reply> <type ACK> <server id 0x0a00011d> <domain name "XYZ">] -
WRT45G: can only connect one pc at the time to internet, cannot login to router setup
Hello,
I don't get this. The complete network worked fine for ... years? After a call with the ISP about a general/different issue, we can now only connect one pc at the time to internet. (We were asked to take out cables and we've put them back).
I've been trying and searching for an answer for hours.
problem:
We can only connect through the router to internet with only one pc at the time (the first pc we connect after starting up the router).
Also we cannot get into the setup menu of the router at 192.168.1.1
We've been trying to reset the modem for 10, 30 seconds.
Auto resolve IP/DNS. DHCP is enabled.
I also remembered that I pushed the SES button, it turned from orange to flashing bluish. I never knew aboutthis function, nor it is mentioned in the manual I downloaded. Now this SES indicator is off.
Also WLAN and DMZ led are off.
I downloaded EasyLink_Connect.exe, went through the setup. It recognises there's internet connection, but stops and says: cisco does not support this modem.
Temp. replacing this WRT45G modem with another one did not resolve the issue.
I have no clue what went wrong, what we did wrong, and how we can resolve this issue? Please help! Thanks
Message Edited by Brammm on 11-27-2008 03:13 PMOkay!
1. (results when having assigned a static IP) :
Windows IP-configuratie
Primair DNS-achtervoegsel. . . . .:
Knooppunttype: . . . . . . . . . .: onbekend (unknown)
IP-routering ingeschakeld. . . . .: nee (no)
WINS-proxy ingeschakeld . . . . . : nee (no)
Ethernet-adapter LAN-verbinding:
Verbindingsspec. DNS-achtervoegsel:
Beschrijving . . . . . . . . . . .:
VIA Compatable Fast Ethernet Adapter
Fysiek adres. . . . . . . . . . . : 00-16-17-CE-D5-40
DHCP ingeschakeld:. . . . . . . . : nee (no)
IP-adres. . . . . . . . . . . . . : 192.168.1.20
Subnetmasker. . . . . . . . . . . : 255.255.255.0
Standaardgateway. . . . . . . . . : 192.168.1.1
DNS-servers . . . . . . . . . . . : 192.168.1.1
(results without having assigned a static IP: automatic config.) :
Ethernet-adapter LAN-verbinding:
Verbindingsspec. DNS-achtervoegsel:
Beschrijving . . . . . . . . . . .:
VIA Compatable Fast Ethernet Adapter
Fysiek adres. . . . . . . . . . . : 00-16-17-CE-D5-40
DHCP ingeshakeld. . . . . . . . . : ja (yes)
Autom. configuratie ingeschakeld. : ja (yes)
IP-adres. . . . . . . . . . . . . : 84.30.99.32
Subnetmasker. . . . . . . . . . . : 255.255.254.0
Standaardgateway. . . . . . . . . : 84.30.98.1
DHCP-server . . . . . . . . . . . : 213.51.144.90
DNS-servers . . . . . . . . . . . : 212.54.40.25
212.54.35.25
2. I do have another router, when I try that one, the problem we have remains. So that's a bit strange to me. That one is supposed to be working.
Does this SES function configure anything other than the modem? So, does it alter PC configurations? I have no clue. We even start to wonder whether the ISP is able to set up their internet in a way that unables us to make use of a router? That would be ridiculous
Message Edited by Brammm on 11-30-2008 04:03 AM -
Every time I introduce the WPA2 passwords I can´t connect. I can only connect to open wi fi networks? Does anyone know why? Thanks
Some users with various Wi-Fi connection problems have reported that they were given the following instructions by Apple Support, sometimes with success. I can't vouch for this procedure myself. After completing the procedure, you'll have to recreate all your settings in the Network preference pane. Make sure you know how to do that before you begin. Taking screenshots of the preference pane may be helpful.
Step 1
Back up all data.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 2
Reset the System Management Controller -
http:/I'm using 4th gen IPOD touch and the wifi can't connect to my home NTWK, it sends me to a far distant IP ADDRESS and can't connect. a building public NTWK is wifi connectable, any ideas how I can resolve this WIFI issue??? TY
[email protected]Do other devices connect to your router?
What do you mean by distant IP address?
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
-power off and then back on yur router
- Reset Network settings: Settings>General>Reset Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
Can only connect from one direction
I'm having trouble video confrencing... I tried searching the forums, but I'm having trouble thinking of clever search terms.
I can only connect from one direction with one person. They can invite me to a chat and it works fine every time. However when I invite them it always fails. I can invite other people and it works fine though.
This doesn't seem like a typical router problem, because they can invite me and we videochat just fine.
This has been a problem for most versions of iChat that I can remember, but I'm using 3.1.5 currently.Hi
Is the other person a PC user.
Tony -
New problem - can only connect w/o security
have a wireless router and had no problem getting my macbook to connect. added a desktop and can only connect if i disable the password feature. my question is twofold:
1. why will it not connect when I have to supply a password (the password is correct)
2. if I cannot resolve issue 1, then can I diable SSID broadcast but still not require a password?Try to include a dollar sign before your password
-
I can only connect to my guest account
For some reason I can only connect to my guest account. I need to get into the web interface to fix this but it doesn't seem possible from the guest ssid? or is it?
Hi, you will not be able to access the router's GUI if you are connected to the guest network because it's like you are connected to a virtual network. It is best to be connected to your main router's network so that you will be able to access the router's GUI.
-
Can only connect to Linksys E4200 when very close but PCs can connect at 50 feet. What's the solution?
If you're technically comfortable in getting to your Linksys settings - try changing the network mode or channel in your router's settings.
I still use my old Linksys router and when it's set to the default channel, which is 7, my Macbook Pro and Macbook Air sometimes have issues - changed the channel to 9 and have had no issues since.
Maybe it might work for you.
In any event - screenshots below are for your E4200 and play with those settings and see if any of the changes you've made improves how your Macbook connects. Before you change any settings, just remember what the old settings are in case you need to go back to your old settings.
Good luck.
Maybe you are looking for
-
Using URL Parameters with HTTP Comms Channel
Hi, I need to build a new interface (HTTP - RFC) which will use several URL parameters. I've created a HTTP communications channel and Sender Service and this works. I'm able to define several URL Parameters by checking 'Adapter-Sepcific Message Attr
-
Pls tell me how to check the errors in BDC CALL TRANSACTION
lemme know
-
Error: ELM does not work from UI
Hello guru´s, hard to explain this briefly, but here it goes. We´re trying to upload an ELM from UI, and it doesn´t work. But the thing is, if you just SAVE from UI (not launch), and then you go to CRMD_MKTLIST and you flag required fields, it works.
-
I have mislaid my original Apple ID which means I am unable to restore my IPad from factory settings
I have changed my Apple ID from the original ID that I used to set up my IPad & I haven't kept a record. This means that I am unable to restore from factory settings after an update error.
-
G'evening everyone, I have been trying to install simple-ccsm from AUR several times, yet get a build error each time. This is the error: ==> Starting build()... Traceback (most recent call last): File "./setup.py", line 108, in <module> proc = subpr