TS1424 how do i solve error (-50) that stops me from connecting to i-tunes?

how do i solve error (-50) that stops me from connecting to i-tunes?

Maybe this will help:
iTunes Store- "Error (-50)" when downloading purchased content
iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases

Similar Messages

  • Logicboard replacement came with new serial that stops me from connecting w iMessage and FaceTime. Applecare ran out and now I am sure it is this issue... How can I get apple to honor the serial mess up?

    The story is that I have an imac i7 that was still under Applecare when the logicboard coraked.
    I brought it in for repair and got it back. Somehow imessage and facetime would never connect anymore and come up with connection errors yet everything else worked. I tried all tens or hundreds of suggestions over hte last few months and nothing worked.
    So I resorted to a clean hard drive repartitioning and install of Mountain Lion.
    To my surprise: it sill did not work.
    That;s when I found an obscure post that I am quite certain is the problem: the poster had the exact some symptoms I had and NOTHING worked. Hrs of phone support etc. Until it dawned on him that he had a logic board replacement after which the issue occurred. He found that his serial was no longer the same as the original item and came up as invalid on the apple website and was not listed in the "About" of his iMac.
    I immediately recognized the recent support symptom and motherboard replacement and checked the rest. And behold it is all exactly as he said. He had to bring it back to the service center and they put the original serial back in and everything worked again.
    Here is my problem: months of troubleshooting have passed and my iMac went out of Applecare warranty. Support does not warrant an exception for the serial online and the service center wants to get paid    I am not wealthy. This computer is my life and I need them to change the serial back to what it was when I purchased the machine. Can someone suggest how I get help. Apple is acting like M-soft in this respect.

    The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
    You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

  • Disconnected my iphone after software upgrade but while photos and my movies were still downloading. Now I get an error message that iTunes can't connect to the phone. How do I solve this?

    Disconnected my iphone after software upgrade but while photos and my movies were still downloading. Now I get an error message that iTunes can't connect to the phone. How do I solve this? I am using a PC and have version 4.3.4 on my iphone 4.

    In order to use ''nxm://'' links, Nexus Mod Manager must be installed and associated with the ''nxm'' protocol.
    * http://www.nexusmods.com/skyrim/mods/modmanager/
    In case of problems with this third-party program, please refer to its support forum:
    * http://forums.nexusmods.com/index.php?/forum/1413-nmm-code-development-chat

  • How do I solve the problem that states: An error occurred while creating the backup folder" on Time Machine

    How do I solve the problem that states: An error occurred while creating the backup folder" on Time Machine

    Please carefully read and also book mark:
    Time Machine Troubleshooting
    Time Machine FAQs

  • HT201442 every time i try to update my ipad, something (error) happends. why dont u fix that for us? why is this always complicated? how may i solve error 3194 now? why updating a software version is so complicated?

    every time i try to update my ipad, something (error) happends. why dont u fix that for us? why is this always complicated? how may i solve error 3194 now? why updating a software version is so complicated?

    Did you take a look at the link that you tagged?

  • How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?

    How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?
    Local Mac shop said to hold down "c" after inserting disk to get "disk utility" to come up in order to wipe hard drive.  I can't seem to get it to do this.

    This W7 was purchased for using Fusion, as others did - per reviews from amazon.  The technician today called their contact at VMWare - Fusion not officially for use with Lion - even though I read at the VMWare support site that others have made it work.  Apparently my setup doesn't work. 
    Do you know how to do the proceedure for bringing up the disk utility when starting the disk?
    BTW, some of the windows applications I want to continue using are Incredimail, Calendarscope, Stamps.com and a few others I have used over many years.  What do you use for email and calendar?
    Wow, sounds like another reason to not use MS Windows.
    Regarding your Disk Utility question, please elablorate I'm not sure what you're trying to do. Disk Utilty is just that...a utility, it's something most users never have to use especially on a new computer. Let me know what you're trying to do there before I give you some instructions.
    As for as your Windows apps I would recommend using Mail and iCal, both come as part of OS X and are very robust tools. Don't discount the software built right into OS X it's very robust and powerful not all like the bloatware most Windows boxes ship with. Stamps.com well I'd look for another alternative. It's clear they don't support OS X which makes me a little suspicious that they're so behind the times. 
    Also if you have not been exposed to these links before I'd strongly recommend bookmarking them and using them. They're extermely useful!
    Switch 101
    Mac 101
    Find Out How Video tutorials

  • How can I solve error 1004?

    How can I solve error 1004?

    Did you try this for deleting photos that I posted in your thread ? Photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view. Photos that were synced from your computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing.
    For '1004' then there are various 'solutions' mentioned from this post onwards which might work for you : https://discussions.apple.com/message/15652754#15652754 - different things appear to have worked for different people.

  • How can I solve a CD that won't eject?

    How can I solve a CD that won't eject?

    Press the mouse while your Mac is starting until the disc is ejected. If it doesn't work, hold Command and S keys while your Mac is starting, and type:
    drutil eject
    exit
    If this doesn't work, the disc is stuck and your SuperDrive has to be replaced, so take it to an Apple Store or reseller. Another option is to use an external disc drive.
    If the last step doesn't work, other steps won't work because there isn't any app using the disc

  • HT201263 How do I solve error no. 1050? I can't restore my iphone! What do i do next?

    How do I solve error no. 1050? I can't restore my iphone! What do i do next?

    ERROR 1015...
    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • How do I solve 'error compiling movie. unknown error'?

    how do I solve 'error compiling movie. unknown error' when trying to export? I think a file is damaged or conflicting but how do I know which one?
    Also, how did this happen in the first place and how can I avoid it in the future?
    Thank you very much!!

    BSHF
    The answers are in the details which are lacking in your report.
    What version of Premiere Elements are you using and on what computer operating system is it running?
    Please check out the Adobe troubleshooting documents for this issue
    Error "Error compiling movie" during render or export
    Troubleshoot damaged projects | Adobe Premiere Elements
    After you review those documents and determine if either suggested troubleshooting scheme will work for you,
    then we can discuss the immediate and future actions.
    Looking forward to your follow up. Depending on your reply, next posts may require of you details
    a. project settings
    b. properties of your source media
    c. edits and inspection of Timeline content with the Timeline expanded with the -+ slider above the Timeline.
    More later.
    ATR

  • HT1414 how do i solve error 1015 when restoring?

    how do i solve error 1015 when restoring ios using itunes?

    You find an answer somewhere else or buy a new phone.
    You can not get help here for a jailbroken phone.

  • How do I deactivate CS3 when I get an error message that I'm not connected to the internet, when I am?

    Trying to deactivate CS3 from one computer to reload on another. Keep getting error message that I'm not connected to the internet.

    That is NOT correct. Customer Support can handle deactivations of CS3. Use Web Chat here:
    Serial number and activation support

  • HT1947 After upgrade to Remote I get error message that says I must connect to wi-fi, though I am connected! What can I do?

    After upgrade to Remote I get error message that says I must connect to wi-fi, though I am connected! What can I do?

    Hey gwscrt,
    Since iTunes directed to you to restore your iPod, I'd check out the following article that goes over the steps to do so:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    I would read the document in full, but here are the applicable steps for you:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    Have a good one,
    David

  • How to suppress compiler errors without excluding database objects from the "Schema Compare" tool (using VS2013/SSDT)

    Hi,
    In short: How to suppress compiler errors without excluding the object from the "Schema Compare" tool ??
    A bit longer:
    We have a SQL Server 2008 project in Visual Studio 2013 running SQL Server Data Tool.
    An old database, with a lot of history in, has been imported into SSDT and there are many syntax errors preventing the project from compiling/running. An typical error is: "SQL70001: This statement is not recognized in this context".
    Running the "faulty" scripts on the server, executes just fine. I understand that there are syntax errors and they should be rewritten, but it's not gonna happen just like that - it is a slow process over a long period of time.
    I know it is possible to change Build Action to None, but that also exclude the object from appearing in the Schema Compare function/window.
    So - how to ignore some compiler errors and still having the objects to appear when doing "Schema Compare" ??
    Thank you in advance.

    Hi Steven,
    Thanks for your comments.
    Well, it sure does help in the future, but right now i would prefer the other way - to suppress some errors and still allow the scripts to build.
    The thing is that if we "rewrite" the objects into create scripts, then we have a huge test job ahead of us + the database environments (PROD vs DEV and UAT) does not share the same AD or DB users and therefore grants is lost if dropping/creating
    objects, right!
    If you drop a object before creating it, the drop will also drop the roles and grants and since they don't share user table, the create will not be able to add the permissions again. There might be a solution to that, but it is going to be very complicated
    for some newbies like us. We need something we can trust.
    BR
    Peter

  • On iphone 4 how do i block text messages that are coming from an email account?

    on iphone 4 how do i block text messages that are coming from an email account?

    There is no way to block text messages.  You may wish to report them to your carrier

Maybe you are looking for