TS1559 i can turn on wifi via control centre but not via wifi menu (greyed out)as ive restored my phone i cant now enter my wifi password

wifi greyed out but can turn on via control centre but now cant entre wifi passwords as i restored my phone

I would try a restore, but more than likely this is hardware.
I would call apple, and i hope you're covered under warranty because it sounds like your wifi module is no good.

Similar Messages

  • Printing wireless via Macbook Pro but not via iPad

    I was able to install, print my HP Deskjet InkAdvantage 3515 from my Macbook Pro but when tried printing using my iPad, AirPrint printer not available.  How come? Did set-up wireless config in printer too.

    1. Turn the router, iPad and printer off
    2. Turn on the router and then wait 30 seconds
    3. Turn on printer and then wait 30 seconds
    4. Turn on your iPad and test print.

  • HT5858 In the control center I can change the mute or the rotation but not both.  How do I fix this.  In settings I can not uncheck both the mute and rotation lock.

    In the control center I can change the mute or the rotation but not both.  In the settings area therefore I can't uncheck the mute and rotation settings at the same time.

    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
     Cheers, Tom

  • Why do headings turn Chinese when I access my email via Firefox but not via Internet Explorer?

    Why do headings turn Chinese when I access my email via Firefox but not via Internet Explorer?

    hello, this is a displaying flaw caused the mcafee site advisor extension - please try to disable or remove that in case you have it present until there is an update by mcafee that can fix the problem.
    http://service.mcafee.com/faqdocument.aspx?id=TS100162
    https://community.mcafee.com/thread/76071

  • Ios7 music from the lock screen via control centre

    Help!!! whilst i can see how it is quicker to access music from the lock screen via control centre it doesn't appear to work correctly
    when returning to the control centre from the lock screen after a few minutes listening to music it works fine i.e. the track you were listening to appeas there
    my issue is that if you return to the control centre after not listening to music say for a few hours or overnight it does no return to the track you were listening to and decidess for itself that its in shuffle mode. very frustrating
    is this correct or is this in the settings

    You can try the standard fixes:
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    - Wait for next iOS update

  • Couldn't find the adequate forum.  I run win 8.1 and the adobe acrobat dc ap on my computer edoesn't acess the doc  cloud.  I can´t turn the mobile link on.  I can acess the clud from my browser, but not from the desktop ap.  I can acess from my mobile ap

    couldn't find the adequate forum.  I run win 8.1 and the adobe acrobat dc app on my computer doesn't access the doc  cloud.  I can´t turn the mobile link on.  I can access the cloud from my browser, but not from the desktop app.  I can access from my mobile app.

    Can you please post a screenshot of your Acrobat DC when launched, without opening a PDF?
    Thanks,
    -Amboo

  • I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number.  We all have an iPad and all use the same apple ID as iPad the bill.  How can I remove their numbers and add mine?

    I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number.  We all have an iPad and all use the same apple ID as iPad the bill.  How can I remove their numbers and add mine?

    Add another e-mail account to your messages, so people could reach you on that e-mail from messages. As soon as you are online (if you have wifi only iPad) you are able to send and receive messages. i.e. your son can send you a messages from his iPhone addressing it to your (that additional) e-mail address.

  • My power button is not working and my phone doesn't wanna turn on i've tried to charge it so it can turn on like it usually does but it's not turning on

    my power button is not working and my phone doesn't wanna turn on i've tried to charge it so it can turn on like i usually does but it's not turning on

    Hold down on the home button simultaenously holding on the sleep wake button (power button) hold it for more than 15 seconds this will then shut down the device.
    If the device is already shut off do this same sequence to see if you get an apple logo. If you get the logo allow the device to login. Write back if this does not resolve your issue.
    Good luck Friend.

  • How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

    How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

    Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
    After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
    Windows doesn't use EFI, will have UEFI in Windows 8 though.

  • A website will open via wifi but not via 3G. Is this a setting on the iPad?

    A website will open via wifi but not via 3G. Is this a setting on the iPad?

    Probably not.  How's your 3G connection?  I ask because I've had issues when the 3G connection isn't strong.  Same with WiFi too, actually.

  • Why can't i delete songs from older i-pod touch, delete feature greyed out and right click or holding control and clicking do not offer delete option

    Why can't i delete songs from older i-pod touch, delete feature greyed out and right click or holding control and clicking do not offer delete option in I-tunes. I've tried using both a Mac Book and PC with newer and older versions of I-tunes.

    It sounds like you are try to delete the songs by connecting the iPod to other than the computer from which the songs were synced. You can only delete songs synced to an an older iPod (pre iOS 5) by connecting the iPod to its syncing computer and unsync them.
    If you want to change syncing computers see:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • My mac mini will connect via airport but not via ethernet.

    I have had a mac mini for several months which I connect via ethernet because it is in a part of my house where the wireless signal is poor. I changed ISP and now I can connect to the router wirelessly but not via ethernet. This doesn't seem to be a problem with the network as the connection works when I connect it to my mac book. Firewall is turned off. There were no major changes to the router settings other than changing the ISP login codes.
    Any ideas? Is this a configuration issue or a hardware problem?

    Hi Mick,
    If your router only supports 10/100 ethernet then it is possible that the auto-detect feature is not working properly to adjust to that speed. The mini has a Gigabit ethernet port. The OS by default sets the port to automatically negotiate the rate but it does not always work and the result is the problem you are having.
    To fix it you wlll have to manually set the rate to 100.
    To do this, open your system preferences, Select Network. Highlight the ethernet port on the sidebar, click the advanced button. Click on the Ethernet Tab, set the configure pop-up menu item to 100baseTX and click the ok button. If all works out you should see that the Ethernet port icon should turn green.
    Hope this helps.

  • Can video chat with Imac non-intel but not with Powerbooks

    Hi,
    I have a Linksys WRT54G firmware v. 1.0.6 connected to a Comcast Cable modem. My IMac Intel Duo (OS 10.4.6) is connected via ethernet cable to the router. I am set to DHCP on router and IMac. My Quicktime settings is at 1.5mb, I have tried with firewall off and on with the appropriate ports open. I have tried upnp on and off.
    I can connect to other Imacs (non-intel) but not to powerbook G4's. With the Powerbooks I can text chat, but sometimes they can see my text, but I can't see theirs. And every video chat is a fail to respond with the powerbook, but they can connect with others.
    Is there anything else I can do?
    Please help. Thanks.

    Hi cmbell,
    Do you know how to access your modem ?
    This should give you somewhere to turn off DHCP.
    Then you go to System Preferences > Network and select the connection method you are using.
    Then select the TCP/IP tab.
    In the drop down that says Using DHCP change it to Manually. (or Manual with DHCP if doing James' way)
    Type the IP you wish to use in the next entry field.
    Copy the subnet mask form the Using DHCP
    Copy any DNS servers listed.
    Copy the router IP address which will be the modem or router in question.
    Hit Apply.
    Done.
    9:23 PM Sunday; May 7, 2006
    Message was edited by: Ralph Johns (UK)

  • Hey guyys .if some 1 from firefox team can help it wud be great......I was using firefox 3.6.3 on Mac OS 10.5.8 and Today I installed firefox 3.0(besides application folder) but not in same application folder like firefox 3.6.3 ...so now i had 2 firefox v

    hey guyys .if some 1 from firefox team can help it wud be great......I was using firefox 3.6.3 on Mac OS 10.5.8 and Today I installed firefox 3.0(besides application folder) but not in same application folder like firefox 3.6.3 ...so now i had 2 firefox version 3.6.3 and 3.0....I had 3.6.3 already open ..i closed it to... open 3.0 ....when i opened 3.0 it asked me to import settings i said no....it opened well.....then i close 3.0 and tried to open 3.6.3 version ...now it was a problem everything got lost sessions, bookmarks, add ons, etc....it went back to default ....when i had 2 profiles in 3.6.3.....can any pls help me on dis 1...is there a way to restore my sessions, bookmarks and add ons ??? I have uninstalled 3.0 version now....??? pls pls pls ....help
    == This happened ==
    Just once or twice
    == today

    It turns out that the problem had to do with network accounts, even though it was not clear at first.  Redirecting the program to the local machine's cache with a network home redirector script fixed the issue.  Thanks anyway.

  • Wifi works at home but not when away from home

    My Wifi works at home but not when away from home, what is wrong?  I thought with a phone plan I didn't need to have a wifi connection.

    You either need WiFi or Cellular (or both). If you have neither, you can't connect to the internet.
    Most people use WiFi at home and Cellular while away from home, or connect to public WiFi networks where there are some.

Maybe you are looking for

  • [CS3 - Win] Smart Guides not showing up when Snap To Grid enabled

    Has anyone else encountered this bug? AI CS3 13.02 Smart Guides are turned on, but hovering over items does not show the cyan hints, snapping to anchor points / paths etc does not work. This only occurs when Snap To Grid is enabled. If you then go an

  • Problems with Front Row

    I just got the new intel iMac but everytime I try to watch movie trailers it goes directly to the "Movie trailer server not responding" screen. It doesnt even seem to try to connect. Anyone else have this issue?

  • ME21N :  Budget exceeded despite active availability control

    we have created a Purchase order  with internal order  based on Puchase requisition. We have noted that the creation of PO isn't blocked with error message BP604 (item && order budget exceeded).(the budget in internal order is 1,00 ) We have checked

  • How to create a folders and sub folders in solution manager ?

    Hi gurus, i want  2 know how to create folders and subfolders inside solution manager under configuration structure or business blue print  structure. tell me in detailed Thank you Regards sasikanth

  • Overflowing one line after my main window box

    hi, in my form in main window i designed a box and it holds 24 lines . after the end of the box in first page another one line is showing that means i want that 25 th line should go to the next page .how to do it??? because here by default in my firs