TS1702 downloaded Jeopardy HD from the App Store. Program loaded but upside down on screen. Deleted and re installed application and it still loaded upside down. This is the only app that has done this. Re-started ipad and re-loaded and still doing th
Anyone had trouble loading Jeopardy HD App? Mine loaded upside down. Tried everything, re-starting, re--loading, all to no avail. Have to turn screen upside down to play.
The App Store is scanning the Mac and finding purchased apps in the Applications folder. It then checks against the list and finds that they are old versions and prompts for an update.
All that is required to install an app is a Apple ID and admin rights on the target mac. The apps she is installing are wrapped in DRM which identify her as the owner, but the App Store doesn't care, as she is entitled to install them on your Mac. But it reads her ID from the wrapper and thus prompts for her password to do the update.
I'd personally suggest that just one of you has admin rights and does all the purchasing off the App Store. You could remove all her apps from the mac, but you'd then need to purchase them again to consolidate them into your ID.
Or you could just get her to do the updates!
Similar Messages
-
My Ipod touch is frozen. The screen shows only USB cable with arrow point to the word Itunes. What is the problem? This is the second touch I have had that has this same problem. HELP!
This time try restoring the iPod to factory defaults/new iPod instead of from backup. You may have some corruption that is causing the problem and it may now be in the backup. If the problem persists after restoring to factory defaults/new iPod. then you likely have a hardware problem and ana ppointment at the Genius Bar of an Apple store is in order.
-
There is also no link at the bottom of this page to visit the full site. It says this in the About part of Firefox (Minefield).
Mozilla/5.0 (Windows; U; Windows NT 6.1; Win64; x64; en-US; rv:1.9.3a6pre) Gecko/20100628 Minefield/3.7a6preOuch! You are using such an old version of Minefield! Why don't you use the betas at least?
Anyway, this isn't the place for Minefield help. See this before you report any bugs at bugzilla:
https://support.mozilla.com/en-us/kb/basic+troubleshooting -
My phone froze this morning while I was replying to an email. Is there anything I can do to get it working and to avoid going into Apple?
Assuming it is charged and did not shutdown due to low battery, have you tried an power off/on? Or a reset by holding the power and home buttons until the apple logo appears and it restarts?
-
I am trying to download a song and it gets to about 3.5mb and stops, then starts all over again. It has done this several times. Could the file be corrupt?
Turn off the Firewall in System Preferences > Security (or Securtiy & Privacy) > Firewall
If you have anti virus software installed, you may need to disable that before downloading.
Restart your Mac and try again. -
Hi, I can't download any application from the aap store it's on a waiting mode, I tried to update some application that I all ready have and it's the same
You will not lose everything on you phone if you backup prior to updating. You can do it maunaully (simply by syncing your phone with itunes) but when you update iTunes will prompt you do back up your phone anyways. After you've updated you can reload everything on to your phone with the itunes back up.
-
i am trying to download a movie onto my brand new ipod that has nothing on it. it is a 8gb ipod and the movie is 3.4 gb. halfway through it tells me there is no more space to download the movie. how do i fix this?
Go to the Store tab in iTunes and click on the Check For Available Downloads.
-
I have over 20 songs and apps on my phone and when i connect it to my computer none will transfer over into my Itunes on my computer this is the first time this has done this and i dont want to loose anything, everything is up to date so im not sure why this is happening
The computer must be authorized to the same account you have on your iPhone. Connect the phone and choose Transfer Purchases from the iTunes File menu.
-
I'd downloaded many apps from the apps store but they're all dissappeared on my homescreen. I found them on purchased apps from the apps store as well, but still cannot run. Help. I'm using iphone 5s n latest version of ios.
Thanks too all the people who responded. . . . (noone)
Got it sorted though. Seems that Apple has issues with multiple apple id's.
Seems i had to somehow remember and use the original id i had when i first bought my 1st iPhone. . . .
Even after that it was extremely hard to get my apps back on my PC.
If anyone else has the same problem. . . .email Apple. Cya. -
my iphone 4s has switched to the US app store and i have tried to switch back to the UK app store with itunes but it keeps saying i need to spend all of my store credit first is there any way around this
Go here:
https://expresslane.apple.com/Issues.action
Ask for assistance. -
Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?
Are you trying to install the 32-bit version on a 64-bit machine, or vice versa?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
The DPMRA service terminated unexpectedly. It has done this 332 time(s)."
Hi,
We’ve been having problems with our DPM backups. We’re running DPM 2012 SP1 on Server 2008 R2 SP1.
In short the backup agent seems to crash causing all jobs to error/fail.
I slightly more detailed explanation of the issue is ….
The critical alert says
“The protection agent on MYSERVERNAME was temporarily unable to respond because it was in an unexpected state. (ID 60 Details: Internal error code: 0x809909B0)”
When we look at the System log we have an event id 7034 from the Service Control Manager source with something like
“The DPMRA service terminated unexpectedly.
It has done this 332 time(s).”
In the Application log we have event id 1000 from the Application Error source
Faulting application name: DPMRA.exe, version: 4.1.3333.0, time stamp: 0x50f5e4f5
Faulting module name: FileWriterHelperPlugin.dll, version: 4.1.3313.0, time stamp: 0x50ad994d
Exception code: 0xc0000005
Fault offset: 0x0000000000062a09
Faulting process id: 0x1a94
Faulting application start time: 0x01ce5636b3b19038
Faulting application path: C:\Program Files\Microsoft DPM\DPM\bin\DPMRA.exe
Faulting module path: C:\Program Files\Microsoft DPM\DPM\bin\FileWriterHelperPlugin.dll
Report Id: e814c3af-c22a-11e2-a2b8-826b64169df1
After looking in the DPMRACurr.errlog I found a “CRITICAL Raising Watson for process” but can’t track down the issue ….
1A94 2320
05/21 15:27:08.284
31
vsssnapshotrequestor.cpp(712)
[0000000002EB93B0]
NORMAL
CVssSnapshotRequestor::StartDoSnapshot [0000000002EB93B0]
1A94 2320
05/21 15:27:10.312
31
vssbaserequestor.cpp(944)
[0000000002EB93B0]
NORMAL
QueryStatus returned 0x4230a, Releasing VssAsync [0000000000BE7030]
1A94 2320
05/21 15:27:10.312
31
vssbaserequestor.cpp(1068)
[0000000002EB93B0]
NORMAL
CVssBaseRequestor::StartGatherWriterStatus [0000000002EB93B0]
1A94 2320
05/21 15:27:11.326
31
vssbaserequestor.cpp(944)
[0000000002EB93B0]
NORMAL
QueryStatus returned 0x4230a, Releasing VssAsync [0000000000BE7030]
1A94 2320
05/21 15:27:11.326
31
vsssnapshotrequestor.cpp(747)
[0000000002EB93B0]
NORMAL
CVssSnapshotRequestor::MapVolumesToSnapshotPaths [0000000002EB93B0]
1A94 2320
05/21 15:27:11.342
31
vsssnapshotrequestor.cpp(767)
[0000000002EB93B0]
NORMAL
CVssSnapshotRequestor:: ProviderId:[{B5946137-7B9F-4925-AF80-51ABD60B20D5}], h/w provider:[0], volume:[\\?\Volume{7d4bcb2f-275e-11e0-afde-c2fd68da2b37}\]
1A94 2320
05/21 15:27:11.498
31
vssbaserequestor.cpp(1101)
[0000000002EB93B0]
NORMAL
CVssBaseRequestor::CheckWriterStatus [0000000002EB93B0]
1A94 2320
05/21 15:27:11.498
31
vssbaserequestor.cpp(1132)
[0000000002EB93B0]
NORMAL
Checking Writer status for writerid: {0074A271-4F24-43E0-9EC7-28A44189CB80}
writerName: DPM Writer
1A94 05F0
05/21 15:27:11.701
18
incompatiblefiltersfinder.cpp(171)
150ACB1B-1308-494F-8145-D1BBC50308EA NORMAL
No Incompatible Service Groups. Hence no incompatible filters
1A94 05F0
05/21 15:27:11.701
31
basewriterbackuphelper.cpp(178)
[0000000002FF9150]
150ACB1B-1308-494F-8145-D1BBC50308EA NORMAL
SetSystemFlags(0)
1A94 05F0
05/21 15:27:11.701
18
dsmsendersubtaskbase.cpp(47)
[0000000002EE0FB0]
150ACB1B-1308-494F-8145-D1BBC50308EA NORMAL
CDsmSenderSubTaskBase: constructor [0000000002EE0FB0] openovl[0000000002EE1120] msgovl[0000000002EE1220] closeovl[0000000002EE1170]
1A94 05F0
05/21 15:27:11.701
31
vsssnapshotrequestor.cpp(1276)
150ACB1B-1308-494F-8145-D1BBC50308EA NORMAL
ssLocalVolumeGuid = [\\?\Volume{7d4bcb2f-275e-11e0-afde-c2fd68da2b37}\], ssClusterVolGuid=[\\?\Volume{7d4bcb2f-275e-11e0-afde-c2fd68da2b37}\]
1A94 05F0
05/21 15:27:11.701
31
basewriterbackuphelper.cpp(370)
150ACB1B-1308-494F-8145-D1BBC50308EA WARNING
Assertion Failure :: false
1A94 05F0
05/21 15:27:11.701
31
basewriterbackuphelper.cpp(317)
150ACB1B-1308-494F-8145-D1BBC50308EA WARNING
Assertion Failure :: pConfigureInfo != NULL
1A94 05F0
05/21 15:27:11.701
22
watsonintegration.cpp(73)
150ACB1B-1308-494F-8145-D1BBC50308EA NORMAL
Inside Watson Handler
1A94 05F0
05/21 15:27:11.701
22
watsonintegration.cpp(116)
150ACB1B-1308-494F-8145-D1BBC50308EA CRITICAL
Raising Watson for process
299C 2860
05/21 15:28:03.736
03
timer.cpp(490)
ACTIVITY
CTimerMgr::TimerThread
299C 2860
05/21 15:28:03.736
03
timer.cpp(503) [0000000000449D50]
ACTIVITY
CTimerMgr::TimerThreadInternal
299C 2728
05/21 15:28:03.741
03
runtime.cpp(782)
[000000000044D3F0]
ACTIVITY
InitializeSecurity found 3 authorized entities
299C 2728
05/21 15:28:03.742
03
runtime.cpp(841)
[000000000044D3F0]
ACTIVITY
InitializeSecurity added COM perm for DPMRADCOMTrustedMachines
299C 2728
05/21 15:28:03.742
03
runtime.cpp(841)
[000000000044D3F0]
ACTIVITY
InitializeSecurity added COM perm for DPMRATrustedDPMRAs
299C 2728
05/21 15:28:03.743
03
runtime.cpp(848)
[000000000044D3F0]
ACTIVITY
InitializeSecurity added DM perm for DPMRADmTrustedMachines
299C 2728
05/21 15:28:03.743
03
runtime.cpp(94)
NORMAL
Found 1 writer account(s) under VSS access control.
299C 2728
05/21 15:28:03.743
03
runtime.cpp(162)
NORMAL
Added writer account [0] 'NT Authority\NetworkService' to the DACL.
299C 2728
05/21 15:28:03.749
22
genericthreadpool.cpp(824)
[000000000044D3F0]
NORMAL
Hr: = [0x80070002] CGenericThreadPool::m_dwMaximumNumberOfThreads[20]
299C 2728
05/21 15:28:03.758
20
commengine.cpp(345) [00000000004C4650]
ACTIVITY
Hr: = [0x00000000] ConnectionNoActivityTimeout: 7200
299C 2728
05/21 15:28:03.759
20
commengine.cpp(359) [00000000004C4650]
ACTIVITY
Hr: = [0x00000000] m_dwConnectionNoActivityTimeoutForSlowReceiver: 7200
299C 2BE4
05/21 15:28:03.764
03
timer.cpp(490)
ACTIVITY
CTimerMgr::TimerThread
299C 2BE4
05/21 15:28:03.764
03
timer.cpp(503) [000000000021FA58]
ACTIVITY
CTimerMgr::TimerThreadInternal
299C 2728
05/21 15:28:03.765
29
dpmra.cpp(160)
[0000000000448CB0]
NORMAL
CDPMRA::Initialize [0000000000448CB0]
299C 2728
05/21 15:28:03.765
31
vaagent.cpp(227)
NORMAL
CVAAgent: Initialize globals
299C 2728
05/21 15:28:03.777
29
mta.cpp(126)
ACTIVITY
CMTA::AddSchemasToSchemaCache => Initialize loaded schemas
299C 2728
05/21 15:28:03.791
29
dpmra.cpp(178)
[0000000000448CB0]
NORMAL
CDPMRA::Initialize loaded schemas
299C 2728
05/21 15:28:03.791
22
genericthreadpool.cpp(75)
[000000000021FD90]
NORMAL
CGenericThreadPool: constructor
299C 2728
05/21 15:28:03.791
22
genericthreadpool.cpp(824)
[000000000021FD90]
NORMAL
Hr: = [0x80070002] CGenericThreadPool::m_dwMaximumNumberOfThreads[256]
299C 2728
05/21 15:28:03.792
29
dpmra.cpp(265)
[0000000000448CB0]
NORMAL
CreateDefaultSubTask [0000000000448CB0]
299C 2728
05/21 15:28:03.792
29
dpmra.cpp(188)
[0000000000448CB0]
NORMAL
Temporary storage path reg key found
299C 2728
05/21 15:28:03.792
29
dpmra.cpp(204)
[0000000000448CB0]
NORMAL
MTA Temp location Path = [c:\Program Files\Microsoft DPM\DPM\temp\MTA\]
299C 2728
05/21 15:28:03.792
29
mta.cpp(209)
NORMAL
Hr: = [0x80070005] CMTA::Initialize => Could not delete file = [c:\Program Files\Microsoft DPM\DPM\temp\MTA\PSInfo]
299C 2728
05/21 15:28:03.793
29
mtamethrottlehelper.cpp(113) [00000000029987E0]
NORMAL
Hr: = [0x80070002] Number of encryption threads = [2]
299C 2728
05/21 15:28:03.793
03
datasourceresourcelimit.cpp(132)
[000000000044D9F0]
NORMAL
Resource Limit Config File: c:\Program Files\Microsoft DPM\DPM\bin\DsResourceLimits.xml
299C 2728
05/21 15:28:03.794
03
datasourceresourcelimit.cpp(138)
[000000000044D9F0]
NORMAL
Loaded DS Resource Limits
299C 2728
05/21 15:28:03.794
03
service.cpp(298)
[00000000000FFD80]
ACTIVITY
CService::AnnounceServiceStatus
299C 0758
05/21 15:28:03.827
03
runtime.cpp(1376)
[000000000044D3F0]
150ACB1B-1308-494F-8145-D1BBC50308EA FATAL
Subtask failure, sending status response XML=[<?xml version="1.0"?>
We’ve since raised a ticket with Microsoft Support but I’m told the System Centre Developer support team are experiencing high call volumes so I’m hoping someone else might be able to point me in the right direction.
We do have a SCOM agent installed but have disabled it and still get the issue :o(
Any ideas of what else to look at?
Thanks,
JohnDid you ever receive an answer back on this? I have almost the exact same issue. I have DPM 2012 Sp1 Update Roll up 5 on Server 2012. Backup jobs will work on a particular server for a couple after forcing synchronization but then all jobs begin to fail.
On the DPM Server I will get: The protection agent on server.domain.local was temporarily unable to respond because it was in an unexpected state. (ID: 60) On the Protected computer in the Event Viewer system log I get: Service Control Manager Event ID: 7034
Description: The DPMRA service terminated unexpectedly. It has done this 688+ time(s).
On the Protected computer under C:\Program Files\Microsoft Data Protection Manager\DPM\Temp I have quite a few error crash logs. Here are some of them.
1318 0C14 03/17 15:47:04.123 03 runtime.cpp(1376)
[008E7060] 60111D39-34B2-4135-BAC2-7AC4368141A3 FATAL Subtask failure, sending status response XML=[<?xml version="1.0"?>
1318 0C14 03/17 15:47:04.123 03 runtime.cpp(1376)
[008E7060] 60111D39-34B2-4135-BAC2-7AC4368141A3 FATAL <Status xmlns="http://schemas.microsoft.com/2003/dls/StatusMessages.xsd" StatusCode="-2137454160" Reason="Error" CommandID="RACancelAllSubTasks"
CommandInstanceID="23976afc-34bc-4d3c-99ea-996bdb34ce99" GuidWorkItem="97a32e51-07f8-4bb2-a292-dcd433b2472b" TETaskInstanceID="60111d39-34b2-4135-bac2-7ac4368141a3"><ErrorInfo xmlns="http://schemas.microsoft.com/2003/dls/GenericAgentStatus.xsd" ErrorCode="536872913"
DetailedCode="-2137454160" DetailedSource="2"><Parameter Name="AgentTargetServer" Value="bspops001.BSPEnterprise.local"/></ErrorInfo></Status>
1318 0C14 03/17 15:47:04.123 03 runtime.cpp(1376)
[008E7060] 60111D39-34B2-4135-BAC2-7AC4368141A3 FATAL ]
1318 0C14 03/17 15:47:04.123 29 radefaultsubtask.cpp(360)
[00EB4F10] 60111D39-34B2-4135-BAC2-7AC4368141A3 WARNING Failed: Hr: = [0x809909b0] : CRADefaultSubTask: WorkitemID
does not exist, {97A32E51-07F8-4BB2-A292-DCD433B2472B}
1318 0C14 03/17 15:47:04.123 05 defaultsubtask.cpp(546)
[00EB4F10] 60111D39-34B2-4135-BAC2-7AC4368141A3 WARNING Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal
: CommandReceivedSpecific(pCommand, pOvl)
1318 0C14 03/17 15:47:04.123 05 defaultsubtask.cpp(751)
[00EB4F10] 60111D39-34B2-4135-BAC2-7AC4368141A3 WARNING Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal
: CommandReceived(pAgentOvl)
1318 0C14 03/17 15:47:04.217 29 radefaultsubtask.cpp(262)
[00EB4F10] 60111D39-34B2-4135-BAC2-7AC4368141A3 WARNING CRADefaultSubTask: WorkitemID to delete does not exist,
{97A32E51-07F8-4BB2-A292-DCD433B2472B}
1318 0C14 03/17 15:47:04.217 03 runtime.cpp(1376)
[008E7060] 60111D39-34B2-4135-BAC2-7AC4368141A3 FATAL Subtask failure, sending status response XML=[<?xml version="1.0"?>
1318 0C14 03/17 15:47:04.217 03 runtime.cpp(1376)
[008E7060] 60111D39-34B2-4135-BAC2-7AC4368141A3 FATAL <Status xmlns="http://schemas.microsoft.com/2003/dls/StatusMessages.xsd" StatusCode="-2137454160" Reason="Error" CommandID="RADeleteWorkItem"
CommandInstanceID="9d7f0075-90a5-4f79-912e-9625fb6ccd76" GuidWorkItem="97a32e51-07f8-4bb2-a292-dcd433b2472b" TETaskInstanceID="60111d39-34b2-4135-bac2-7ac4368141a3"><ErrorInfo xmlns="http://schemas.microsoft.com/2003/dls/GenericAgentStatus.xsd" ErrorCode="536872913"
DetailedCode="-2137454160" DetailedSource="2"><Parameter Name="AgentTargetServer" Value="bspops001.BSPEnterprise.local"/></ErrorInfo></Status>
1318 0C14 03/17 15:47:04.217 03 runtime.cpp(1376)
[008E7060] 60111D39-34B2-4135-BAC2-7AC4368141A3 FATAL ]
1318 0C14 03/17 15:47:04.217 29 radefaultsubtask.cpp(263)
[00EB4F10] 60111D39-34B2-4135-BAC2-7AC4368141A3 WARNING Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal
: (HRESULT)0x809909B0
1318 0C14 03/17 15:47:04.217 05 defaultsubtask.cpp(546)
[00EB4F10] 60111D39-34B2-4135-BAC2-7AC4368141A3 WARNING Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal
: CommandReceivedSpecific(pCommand, pOvl)
1318 0C14 03/17 15:47:04.217 05 defaultsubtask.cpp(751)
[00EB4F10] 60111D39-34B2-4135-BAC2-7AC4368141A3 WARNING Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal
: CommandReceived(pAgentOvl)
1318 0C14 03/17 15:47:04.685 03 workitem.cpp(86)
[00E9CED4] F94114B7-BA2F-46A3-8133-D1B358E78670 ACTIVITY Idle Timer created with timeout = 390000
1318 0C14 03/17 15:47:04.982 05 xmlprocessingutils.cpp(1469)
F94114B7-BA2F-46A3-8133-D1B358E78670 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : E_INVALIDARG
1318 0C14 03/17 15:47:04.998 31 vadatasourcestate.cpp(747)
F94114B7-BA2F-46A3-8133-D1B358E78670 WARNING Failed: Hr: = [0x8007007e] GetModuleHandle failed for Library [FileWriterHelperPlugin], will try LoadLibrary
0000 0C14 03/17 15:47:04.998 00 fsutils.cpp(4750)
F94114B7-BA2F-46A3-8133-D1B358E78670 NORMAL CClientReadThrottler::InitializeWaitForClientRead Failed to read sleep time from registry [hr = 0xdf9690]. Setting default [50 ms].
1318 0C14 03/17 15:47:05.014 31 dllmain.cpp(36)
F94114B7-BA2F-46A3-8133-D1B358E78670 NORMAL FileWriterHelperPlugin: DLL_PROCESS_ATTACH
1318 17B8 03/17 15:47:05.014 31 basewriterbackuphelper.cpp(159)
[00EC5A28] F94114B7-BA2F-46A3-8133-D1B358E78670 NORMAL SetOperationType(2)
1318 17B8 03/17 15:47:05.014 22 watsonintegration.cpp(73)
F94114B7-BA2F-46A3-8133-D1B358E78670 NORMAL Inside Watson Handler
1318 17B8 03/17 15:47:05.014 22 watsonintegration.cpp(116)
F94114B7-BA2F-46A3-8133-D1B358E78670 CRITICAL Raising Watson for process
0628 04D0 03/17 15:48:04.827 03
timer.cpp(490) ACTIVITY
CTimerMgr::TimerThread -
The guy at the verizon store programmed my phone before I got the chance to restore my apps, etc. from icloud- therefore i did not get to go through the setup assistant.. How do i get my apps and app data back on my phone w/o having to go through and re-
To restore from an iCloud backup you have to erase the phone and start over. To do this, go to Settings>General>Reset, tap Erase All Content and Settings, then go through the setup assistant again and when given the option, choose Restore from iCloud Backup. There is no other way to do this.
Be sure you phone is connected to wifi and your charger as this is likely to take some time to finish. -
my final cut keeps on closing down after about 10 - 15 minutes of editing and deletes my progress it has done this about 6 times now and was wondering if anyone had had this problem and overcame it?
What version of FCP X are you using?
What is the full spec of your Mac?
What codec (file format) of video are you working with.
Andy -
mail is suddenly not recognizing my password. it has done this now and then for a few minutes, but this time it's been days. anything I can do?
try resetting your phone by turning it off and back on again. The servers may still be having a hard time keeping up, so you may just need to wait a little while and try again.
Maybe you are looking for
-
Problem with TrayIcon and mouse events
Hi, I am trying to listen for a mouseEntered event on a TrayIcon. This is the code i am using: final TrayIcon icon = new TrayIcon(getImage(), "tray icon"); final SystemTray tray = SystemTray.getSystemTray(); try { tray.add(icon); }catch (AWTExcept
-
Now I've really done it. I need help with iPhoto as I can't get into it at all.
I sent a request earlier regarding my MacBook Pro. I was trying to set up both computers so that I could network, mainly wanted to send my photos from the iMac (running OS X 10.6.8 and iPhoto '08). After some trials I got the two computers so that
-
Unable to edit the Project details from PWA in Project server 2013
I am Migrating the project from MS Project 2007 to MS Project 2013.In that i save the project as a file first in 2007 and then open that file in MS Project 2013 And publish it.But in some Project when i am Trying to change the projects details from
-
Technical Analysis TAB is not visible in PCUI
Dear Forum, I have made all the settings for Technical Analysis TAB in T.Code: CRMC_Blueprint_c Application Element>TAB page Group>Tab Page Group Structure Tab Page Group : CPL_ODP1 Technical TAB is visible but when we click on this, No event is occ
-
Period zero balance in PCA - Any report?
Hi All, Is there any report in PCA, which shows the period '0' balance? I have already tried 2KEE, KE5Z, KE5T, GD13 and table GLPCT (TSLVT field). This is required to comapre the balance carry forward. Any thoughts? Thanks Pradeep Edited by: Pradeep