TS1702 I did all of the steps to get apps to work and they shut down right away still

I tried a reset, uninstalling and reinstalling app, installing a new app and my app still kick back to the start page right away.  So frustrating, any ideas?

You must have gone to the old microsoft post.
Here is the link:
http://support.microsoft.com/kb/2438651

Similar Messages

  • I may have deleted some system files from my computer due to my antivirus and now my imac won't start. Actually it does, and then there is a blank screeen with the apple logo and it shuts down right away. is tehre a possibility of recovering my files?

    Hello
    I was having some problems with my Imac, for a while it was slow and often disconneceted from my wifi, while this one worked perfectly (tested with other devices)
    I thoug i might have a virus, so i downloaded an antivirus (mac keeper) and started checking.
    I also did a scan of my computer using Console or something from the utilities, and then a folder popped witha  file I had canceled a while ago. I canceled the file and then my Imac continued to be slow.
    i then restarted my Imac, but when it started, the usual grey logo of Apple appeared, and then it shut down suddently.
    I tried to reboot it holding the command key and R but nothing, and then i tried holding the shift key and a bar appeared, and at half of the bar it sut itself down again.
    I think it is probably a preoblem because I may have cancelled some of the system files from a folder called "private" in the "documents" folder.
    Is there any way I can recover some of my files? maybe all of them? I hope so because I have some important files there
    Is this a thing I can do myself or do Ineed to go to a MacStore to repair it? Will I need to change HD or just to format it and reinstall? also if there is any way i can recover some of my files that would be great.
    Thanks
    Ludo
    P.S. problems appeared when i installed the Mavericks version.

    If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
    Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
    An Internet connection will be required (wired or wireless).
    At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
    Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk.

  • My itunes wont sync with my iphone at all, even after i did all of the steps given to me by apple. what should I do?

    my itunes wont sync with my iphone at all, even after i did all of the steps given to me by apple. what should I do?

    A wet phone is out of warranty. This is considered user damage. Even if you were able to get it to start now, the chances of it working for long are slim. I suggest going to Apple and see about an OOW replacement. One for the iPhone 4 is only $149USD and it would come with a short warranty. It is a refurbished device and you would not be worried about encountering additional problems.

  • EZ Vinyl Converter problem transferring to iTunes - window appears  "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again.  I have now tried many times.

    EZ Vinyl Converter problem transferring to iTunes - window appears  "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again.  I have now tried many times.
    The deck is ION TTUSB05XL   Laptop   Asus V550C with Windows 8.
    Strangely I did manage to successfully transfer two tracks to iTunes, but all further attempts have failed.
    JJR

    EZ Vinyl Converter problem transferring to iTunes - window appears  "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again.  I have now tried many times.
    The deck is ION TTUSB05XL   Laptop   Asus V550C with Windows 8.
    Strangely I did manage to successfully transfer two tracks to iTunes, but all further attempts have failed.
    JJR

  • I installed Photoshop 13 which appreared to do fine. Everytime I try to open it I get the message "Photoshop has quit working and is shutting down." Why?0

    I installed Photoshop Elements and Preimere 13. This appearred to install properly but I can not open it. When it opens the circle goes around for awhile but then a pop up say that Photoshop has stopped working and is shutting down. Also. how do I get my photos from Photoshop 10 into Photoshop 13?

    You don't have "Photoshop" proper.  You have a cheapo emasculated version called Photoshop Elements.  That is NOT Photoshop.
    As Gene told you:
    Unfortunately, you're in the wrong forum.  This is not the Elements forum.
    Here's the link to the forum you want:
    https://forums.adobe.com/community/photoshop_elements/content

  • I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down

    Elements 10 was deactivated on desktop and installed on new laptop.  Have on
    y used it for photo editing until yesterday. Created a slide show with music but every time I try to burn to cd or move it to hard drive after about 15 sec, it says windows has encountered a problem with this program and must shut down.
    I Also can't sign in to adobe with the program. It simply spins and I had to force close the program.
    help!?

    I am using photoshop Elements 10 under the create tab...slide show.
    Used it on my desktop several times. Deactivated it and installed on new lap top about 5 months ago.  Had not used it other than for photo editing until today.
    I can also not login in thru the program. It simply spins and I finally had to force close the program
    Toni V. Sloan
    Sent from my iPad
    On Jun 27, 2014, at 7:03 PM, Chris Cox <[email protected]>
    I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down
    created by Chris Cox in Photoshop General Discussion - View the full discussion
    Photoshop doesn't do slideshows… What software are you using?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6504356#6504356
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I tried to install the new iOs 7 on my iphone5 and itunes shut down before it completed and now my phone is stuck on with the apple and a line under it.

    I tried to install the new iOs 7 on my iphone5 and itunes shut down before it completed and now my phone is stuck on with the apple and a line under it.

    Hello roch23
    Check out the article below to get you back up in running.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • TS1702 I did all of the above recommendations and still Biblexpress is not working. Should not the developer have an update to care for the problem?

    I did all of the above recommendations and still Biblexpress is not working. Should not the developer have an update to care for the problem?

    You should contact the developer directly to inform them of any issues.
    There should be links in the App and if not, there should be links
    to the developer's site and support in their presentation in the App Store.

  • Itunes won't recognize my ipod nano 5th gen. it's recognized by the computer, but I get a message from itunes that says an ipod has been detected, but it couldn't be identified properly. i did all of the steps on the ipod assistant. unistalled and reinsta

    Itunes will not recognize my Ipod Nano 5th g. It shows up on my computer. But Itunes gives me a message that says "An ipod has been detected, but it could not be identified properly. I did all the steps in the ipod assistant. Unistalled and reinstalled drivers and itunes. restarted ipod and even erased everything. It is recognized by other computers. And itunes recognizes my iphone fine.  please help.

    Have you restarted your computer?  iTunes updated? 

  • Even after I did all of the steps listed on various forums, the SSL 3.o or TLS 1.0 erroe will not disappear. Please Help!

    Ever since last sunday, whenever I try to purchase an app from itunes, I always get this error explaining that I cannot establish a secure connection. I made sure TLS 1.0 and SSL 3.0 were enabled in options and I made sure the firewall was notblocking itunes, and I made sure that the host file was not blocking itunes.
    I've done everything, please help?

    I have become ridiculously desperate. Itunes works for everyone else on my connection excepr e. I'VE TRIED EVERYTHING. I UNINSTALLED ALL SECURITY SOFTWARE AND CHECKED MY HOST FILE. NOTHING IS WRONG AND STILL ITUNES DOWN RIGHT REFUSES TO WORK. SOMEBODY PLEASE HELP ME!!!

  • I followed all of the steps to iCloud setup on PC and Photo Stream does not work

    I have a Windows 7 PC, and an iphone 4.  I upgraded to IOS 5 and did the iCloud setup with the download Control Panel app and set it up.  However, when i take a photo with my iphone, the photo goes to my camera roll and does not go to my photo stream and there fore not to my PC photo stream folder on my PC. 
    So far Photo Stream does nothing.  Also, Are we supposed to be able to see our photo stream if we login to iCloud?  When logged in to iCloud, I see my contacts and mail and other stuff bu no Photo Stream. 
    Am I missing something?
    Thanks,
    Jay Abbott

    I figured out the answer to my question.  Photo Stream will not sync unless your iphone is connected via Wi-Fi.  Now I have to go find a Wi-Fi network to see if I am correct.  I read the maunal, wow, what a concept. 
    I hope this helps others who don't read the manual but complain on the forums!

  • I have asked iTunes to print a cover and get a Windows failed and it shuts down iTunes.  The iTunes support asks for a serial number.  My previous iTunes won't print CD cover is what started this.  I have removed and reinstalled the iTunes, Quick Time etc

    I have removed and reinstalled iTunes Version 11, Quick Time, Apple Software Update, Apple Mobile Device, Bonjour, and Apple Applications Support.  I received this instruction from "http://support.apple.com/kb/HT1923.  I reinstalled Version 11 and it still will not print the CD covers and shuts down sometimes when I ask it to print.  I hope they will find a way to make it work. 

    Well my first guess was wrong. The line that failed is the one that writes out the image to disk. I've not revisited the code for that script for ages, but it seems I did add in an extra test for missing files a little while later, then forgot to upload the change. I can reproduce the error message if I deliberately rename a file to confuse iTunes so that seems the most likely reason for your problem with the script. I've uploaded a new build of CreateFolderArt which should work better.
    See FindTracks for a tool to repair broken links. You should probably get that issue fixed first.
    I know what SPSS stands for but that is all I know about it.
    tt2

  • When i unplug my iphone 4s from my car charger, the home screen gets huge.  cant restart or shut down

    i just got home, my iphone 4s was charging via usb and connected via bluetooth to my sync system.  Whe I shut down the vehicle and unplugged the power cord, the phone display gets huge.  cant shut down or see the icons

    Hey viviet,
    I would run through the iPhone troubleshooting assistant and see if that solves any of the issues you're experiencing:
    iPhone Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/phone/
    Hope that helps,
    David

  • I restored my iPod touch, but was unable to restore my data from a backup, so I synced it and now all of the data from my apps has gone, and so have in app purchases. Is there anything I can do to get them back?

    Does anyone know if there's anything I can do to get my app data back? All levels completed on games have been erased, and I am unable to use in app purchases which I did purchase, such as the Mighty Eagle in Angry Birds. Thanks for your help

    Go to the Device tab in iTunes' Preferences and se what the date iis of the backup(s).  Apple only retaines the latest backup unless you restor from a backup and that one is also kept.

  • Itunes continues to crash and I get the Data Execution Prevention error from Windows and it shuts down. How do I fix my Itunes?? This startes happening after the Itunes update

    Itunes continues to crash and I get a Data Execution Prevention error.

    Vista 64 bit
    Many thanks. If you're still not launching after your complete uninstall/reinstall, we'll go searching for old QuickTime componentry stashed in non-standard locations on the PC.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    Open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Maybe you are looking for

  • FCP 4.5 on a new MacBook Pro (intel)?

    I have a new Macbook Pro and I have FCP 4.5. Can I install 4.5 on my new intel Macbook? And will it run correctly? Just Curious. Thanks in advance.

  • Check Number not being generated

    We do not have SAP Check printing functionality activated right now. So the checks will be handwritten. When i created the Payment Method for check, I assigned RFFOEDI1 in the payment medium program. I also created the check lot for that House bank a

  • Top-Level Navigation Tab Image

    In the top-level navigation it allows you to assign background colors for the tab colors when selected or not selected. However, you can reference an image with a unique path in this field. So when the top-level navigation renders it displays an imag

  • SQLJ Translator

    Hi all, I'm getting the following error while trying to translate using sqlj from the prompt. Error:Error in Sqlj Stub: path or file name "java" not found. what could be the problem ?Is it bcoz of installation problem ??Plz help me .

  • WANTED  NEW PRICE  IN INVOICE

    Dear Friends,I have one requirement. Price has changed from order time to billing time.system is picking old condition record instead of new one at the time of billing. When i go for pricing analysis,the condition record value is showing as new price