TS1717 i tunes won t let me burn playlist to blank disc...put cd in and ran diag...says its ok.when trying to burn disc it stops and gives an error

i tunes will not let me burn playlist to blank disc..just started doing this ,because i have burn many cds...i put audio cd in and ran diag..it said it was ok..shuts down burn and gives a code...please help before i throw out the window

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Similar Messages

My iMessage won't activate my email but will with phone number. I type my password and it says it's wrong I change it and it still says its wrong. I even made a new account and it still says the password is wrong.

My iMessage won't activate my email but will with phone number. I type my password and it says it's wrong I change it and it still says its wrong. I even made a new account and it still says the password is wrong.

Hi hectorness12!
Thanks for using the Apple Support Communities! I have found an article that can help you with troubleshooting your iMessage issue. The article can be found here:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thanks,
Braden

I tunes: when trying to burn a playlist I keep getting the message: the attempt to burn a disc failed. The disc could not be read from or written to. I am using version 12

I tunes: I am using version 12 of I tunes. Ever since downloading it I get the message when trying to burn a playlist it says, The attempt to burn a disc failed. The disc could not be read from or written to.
I uninstalled V-12 and then reinstalled it. This enabled me to burn a disc again but after a couple of tries I received the same error message again. Has Apple put out a fix to this problem that anyone is aware of?
Thanks.

Hi rossfrombluffton,
Welcome to the Support Communities! The resource below provides some general things to consider when burning a disc with iTunes. I would also try burning a music CD and a data disc from a different application in the Windows OS and trying a different brand CD just to confirm the issue is not with the optical drive.
Can't burn a CD in iTunes for Windows - Apple Support
http://support.apple.com/en-ae/HT203173
Find out what to do if you can't burn an audio CD using iTunes for Windows. Sometimes an audio disc may not burn as expected. Here are some things to check.
Update iTunes
Download and install the latest version of iTunes for Windows.Check for unauthorized songs
iTunes will stop burning a disc if you purchased one or more of the songs in a playlist from the iTunes Store and the songs aren't authorized to play on your computer. This message should appear: "Some of the files can not be burned to an audio CD. Do you still want to burn the remainder of this playlist? For more information on why some files can not be burned, click below."
To find out which songs aren't authorized, play each song in the playlist. Songs that play are authorized. Songs that don't play aren't authorized. You'll be asked to authorize any unauthorized songs.Make sure your playlist will fit on a single CD
If there are too many songs in a playlist to fit on a single CD, iTunes should ask if you want to burn multiple discs or cancel the burn. This message should appear: "The songs in this playlist will not fit on one Audio CD. Do you want to create multiple Audio CDs with this playlist split across them? This will require more than one blank CD to complete."
If you click the Audio CDs button, the burn will continue and you'll be asked to insert blank CDs until the playlist is completely burned. If you click cancel, the burn will be canceled.
To make the playlist shorter so that it will fit on a single CD, select a song to remove from the playlist and choose Edit > Clear. Repeat this step until the duration of the playlist is between 60 and 80 minutes. The duration appears at the top of the playlist window. Most CD-R discs can hold 60 to 80 minutes of music.
Check how many times you've burned the playlist
An unchanged playlist that contains songs purchased from the iTunes Store can be burned no more than seven times.Additional steps and submitting feedback
Go to iTunes Support to get additional troubleshooting suggestions specific to your optical drive configuration or to submit feedback to Apple.Learn more
For additional troubleshooting, please see these steps:
Additional troubleshooting tips for burning issues
iTunes for Windows doesn't recognize my audio CDs
Last Modified: Feb 3, 2015
Have a good day ...
- Judy

I recently changed my plan to the photoshop plan which includes photoshop and Lightroom but LR won't let me go into the Develop Module or the other Modules because it says Develop Module is disabled. Please renew your membership to reactivate. I'm still a

I recently changed my plan to the photoshop plan which includes photoshop and Lightroom but LR won't let me go into the Develop Module or the other Modules because it says Develop Module is disabled. Please renew your membership to reactivate. I'm still a member so why won't it let me go into Develop Module? or any of the other modules?

The Photoshop LR CC is active but you have not yet activated it. The activation server shows it. Please log out & log back in of the CC desktop CC.
The Complete CC purchased last year is active till 11th of July. In case after logging out & logging back in does not resolve the issue, please contact Customer support Contact Customer Care
Regards
Rajshree

When trying to burn a playlist to a blank CD, iTunes 10.3.1 won't recognize the blank CD I've inserted (Verbatim CD-R). I've burned using these CDs before, this is a recent problem. Not the burner, as I can burn using Toast. iMac with Snow Leopard 10.6.8

When trying to burn a playlist to a blank CD, iTunes 10.3.1 won't recognize the blank CD I've inserted (Verbatim CD-R). I've burned using these CDs before, this is a recent problem. Not the burner, as I can burn using Toast. iMac with Snow Leopard 10.6.8

What kind of CD are you burning (Audio or MP3)?
If you're burning an MP3 CD, the songs must already
be in mp3 format.
If not, iTunes will tell you that you have no songs
in the playlist.
M
I was making an audio cd. But I have since found out what the problem was. The files in my PLAYLIST I converted to aiff, since they were SDll files (I thought they were similar to AIFF, and they PLAY on Itunes...just won't burn.) When I selected the songs in the playlist and converted them...I thought all those files were converted, They were not. The converted files went into my LIBRARY, even tho I selected the ones in the playlist...and once I exchanged the SDll versions of the songs in my playlist. THEN they burned fine...but still...it's confusing..you say convert..it says it's been converted..and what they don't say is it's not been converted inside the playlist...where I had selected the songs...It just ADDED aiff versions..but only in the library...Anyway, that's what happened. But it's strange that it PLAYS SDll but won't burn them....and you'd think, logically..the ones you selected would change...but they don't. Playlists are mainly pointers to the actual files I guess...a sort of Alias..
At least it works now. But it's sad that the latest itunes does more, but also does LESS...as I used to be able to burn SDll files. Now I'll have to convert all my files to AIFF, and mp3's as I assume my ipod video won't play anything but mp3's?

Trying to a Downloading 17 App, and although I am over 17, it won't let me download said app. I put money in on this app, so please help! What do I do?

I was tying to download the Walking Dead app, and although I am over 17, it won't let me download said app. I put money in on this app, so please help! What do I do?

Check your birthdate on your Apple account under the Password & Security section:
https://appleid.apple.com
Also check your Restrictions:
Settings > General > Restrictions

Is this now where to ask DVD Studio Pro questions? If not, please let me know where. Here's my question: Using DVD Studio Pro 3, when trying to burn a disc which is 4.5GB, I get error message "Not eough disk space in target folder". What to do?

Is this now where to ask DVD Studio Pro questions? If not, please let me know where. Here's my question: Using DVD Studio Pro 3, when trying to burn a disc which is 4.5GB, I get error message "Not eough disk space in target folder". What to do?

Thanks. Unfortunately, I need to make a master DVD that can then be duplicated in bulk as a single layer disc. This surprises me because I tried burning a different DVD project that has worked in the past which is also 4.5 GB and now I could not burn that either. I also reencoded some material to get the new project down to 4.4 GB but it still would not burn. Any ideas are appreciated.

My iPhone was fine earlier today, but in settings....it won't let me access iCloud, FaceTime, mail settings.....what the heck? I've tried everything. My iPad is fine and iCloud etc. works

My iPhone was fine earlier today, but in settings....it won't let me access iCloud, FaceTime, mail settings.....what the heck? I've tried everything. My iPad is fine and iCloud etc. works!

Turn OFF the restriction to allow changes to accounts you've set in Settings > General > Restrictions.

I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I keep getting a 4000 error when trying to burn discs....only been since the update....Help

Ever since the Itunes update, I keep getting an 4000 error when trying to burn my music to disc. How do I fix this?

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

I get an error when trying to burn recover DVDs on a HP pavilion g6-1311AU laptop

I get an error when trying to burn recover DVDs on a HP pavilion g6-1311AU laptop. I have tried a number of different DVD disks but keep getting the error. I supect that the recovery program is trying to burn at too high a speed as I have had this problem when burn to 16x spped DVDs, but I can't find any way to change the burn speed in the recovery program. Any sugestions would be appreciated?
Regards, Steve

Hi
Please find the link given below might help you to fix the issue note windows vista & 7 troubleshooting are the same.
Troubleshooting CD or DVD Disc Burning Problems
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Why does idisc quit unexpectedly when trying to burn a disk?

Why does idisc quit unexpectedly when trying to burn a disk?

Since iDisk is an online service for keeping your data and has nothing to do with burning CDs or DVDs, you must be thinking of something else. What application are you using to burn? the Finder? iTunes? iDVD? Toast? Or something else?
Is there an error message that appears when this occurs?
Let us know, we'll keep working with you.

I'm getting an error when trying to burn Blu Ray.

When trying to burn a Blu Ray disc in Encore it is giving me an error that says, Blu Ray Object "wedding 6-20-09 tru blu.m2v" export
file not found . Please help. Thank You .

First, Fix Encore Win7 Problem http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
Second, shorten the name and remove all spaces and non-letter characters
Long File Names Cause Crashing http://forums.adobe.com/thread/588273

When trying to burn a cd in iTunes, message says no disc burner or software found. What do I do?

When trying to burn a cd in i
Tunes, meassage appears "no disc burner or software found". The last time I burned a cd was about a month ago and had no problem. What do I do?

Windows computer (as it says in your profile) or Mac (the forum in which you posted)?
Restart your computer.

Get "error 4300" when trying to burn a playlist cd

All at once I am getting this error when trying to burn a cd in iTunes. Sometimes it will burn one song and then again it won't.

Hello aleahcim915,
I was looking through our resources for troubleshooting cd burning errors in iTunes for Windows, and came across some great information for you. I would first recommend you use this article named iTunes for Windows: Additional troubleshooting tips for burning issues found here: http://support.apple.com/kb/TS1374.
Start here, and work your way down:
Resolution
If after following the instructions in this document you still can't read or burn discs, try the following:
Try other software
Open a different music player, such as Windows Media Player, and test if it can play a CD you've burned.
Open the CD burning software that came with your computer or disc drive, and test to see if it can burn a CD.
If you're not able to read or burn discs using other software, there may be a more general issue with your computer or the drive. You should probably contact your computer or drive manufacturer for help. In the mean time, try the tips below.
Use good blank discs
Some brands of blank discs may work better with your drive than others. Check the disc manufacturer's website for the brand of blank discs you are using. Many brands post lists of drives that have issues burning to their discs. They may also publish tips on how to troubleshoot burning issues.
You can use the chart below as a general guideline to assess what types of CD-R media are compatible with different drive types.
If need be you can also re install iTunes, and Apple has another article that will walk you through that. For Windows 7+ and Vista, http://support.apple.com/kb/HT1923 depending on the version you have installed.
All the best,
Sterling

TS1717 i tunes won t let me burn playlist to blank disc...put cd in and ran diag...says its ok.when trying to burn disc it stops and gives an error

Similar Messages

Maybe you are looking for