TS1846 I have tried to save my project to an ext. harddrive. Something went wrong an now I cannot find my project and load it to my timeline? What do I do?
I have tried to save my project to an ext. harddrive. Something went wrong an now I cannot find my project and load it to my timeline? What do I do?
Kind regards
Bo Rasmussen
Denmark
Please post screen shots. You see the drive, but there's nothing in it?
The root level of the drive is this
What's at the top level of the drive? Post a screen shot.
Similar Messages
-
Something Went Wrong Trying to install...
I haven't every been able to get AIR to work on my laptop
since it was called Apollo, but I got a bunch of cool links to
stuff at MAX that I wanted to try out, so I uninstalled the AIR
Runtime I had, rebooted, installed AIR 1.5, and now all attempts to
install AIR applications com back with the dreaded "Something Went
Wrong Trying to install this application." error.
I'm running Vista Home Premium, and I did run into a problem
where the HKLM/Software/Classes/.air keys were locked, and after
wrestling with the Registry permissions, I managed to clean that
up, so the installer now seems to be creating and deleting those
keys properly. However, I'm still getting this "Something Went
Wrong" error.
I've created .airappinstall.log and .airinstall.log files in
my home directory, but the .airappinstall.log file remains empty.
The .airinstall.log file shows a successful install of the AIR
runtime.
I've got several .air files that I've downloaded and saved to
my computer, and these seem to suffer the same problems as if I
were using the "Badge" installations online.
If I uninstall the AIR application, and then use a Badge
install to install both the application and the runtime, both
successfully install. However, any subsequent application installs
fail with the same "Something went wrong" message.Do you have Vista 64bit?
Does this look like your problem?
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=75&catid=697&threadid =1406474&enterthread=y -
Hi, I am unable to install new itunes version to windows 7 PC. It requires application support and gives windows error 2. I have tried to save on desktop and run as administrator but errors remains, what other options do I have?
Hello, hanliefromzaf.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
iTunes for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Cheers,
Jason H. -
How do i convert a pdf into a word file, i have tried doing save as?
how do i convert a pdf into a word file, i have tried doing save as?
Hi Jack,
What version of Acrobat are you using?
You might need to go to File> Save As Other> Microsoft Word or choose 'Adobe PDF printer' from the File menu.
Is save as option not functioning correctly? Do you get any specific error?
Please let me know.
Regards,
Anubha -
I have tried to save a Pages document to a Word document but it does not work. Plse advice !
I have tried to save my Pages document into a Word document but I keep on running into trouble = it does not work ! Anyone can help me ?
mossenane wrote:
Name of Pages document is RoomscheduleSTAYATBROMMA#2-?
I'm afraid that your choice if names is the problem. Try "RoomSched2X", or similar, and let us know how it goes. If that works you can try some other names of your own choosing.
Jerry -
I have tried to update the software on my ipad 2, 16GB, through itunes, but the update has not been completed and has frozen, what should I do?
Hey there alaili55,
Welcome to Apple Support Communities.
It sounds like you ran into an issue updating your iPad 2 with iTunes on your computer. Take a look at the article linked below and try the troubleshooting tips that it provides, which will resolve most issues updating iOS devices.
Resolve iOS update and restore errors in iTunes - Apple Support
Cheers,
-Jason -
Project Online - Sorry, something went wrong when trying to load PWA
Hi All
When trying to load a Project Online instance (a new deployment in this case), we get the 'Sorry, something went wrong' error message.
I tried to provision another PWA site (PWA2), and the same error occurs.
Anybody seen this?Hello,
Providing it has provisioned correctly in the SharePoint Site Collection admin page, there isn't a lot you can do other than raise a support ticket via the Office 365 tenant. If these are new blank PWA instances, try switching the permission modes, see if
that helps.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads -
When i try to download 'Get album artwork' I receive error alert with (-609) I have tried to download the artwork on the advanced tab, but still no success. My computer runs Windows 7 and the alert appears in my itunes which on my computer.Can you assist?
Perhaps try the "Error -609" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
Trying to up date my OSX currently use 10.7.5. i have tried to download mountain lion but it says i need 10.8.0 but i cant find the download link to download 10.8.0 HELPPPP!!!
Download Mac OS X 10.9 from the Mac App Store. If it's incompatible with your computer, Mac OS X 10.8 will be as well.
(91497) -
I have tried to update my iPhone 4 many times (from iOS 5.1 to latest version), but everytime it fails and says that it cannot be updated. unknown error (3194). please help.
<E-mail Edited by Host>You might try reading the entire help document you linked from:
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
i have tried to download itunes in my PC. as soon as i click 'download now' nothing happened. how should i download itunes?
Download from here:
http://www.apple.com/itunes/download -
I tried installing windows and something went wrong and now it seems I have erased Mac OS too because when I turn it on, it says Insert bootable device. Now what should I do?
Welcome to Apple Support Communities
Press Option key on boot and select the OS X partition. If it isn't here, press Command and R keys on boot, open Disk Utility, erase the drive and install Lion or Mountain Lion -
Error message when trying login to Network Monitor "oops something went wrong"
I am trying to get network monitor to work on my network. However, when installed I enter my credentials and get the error something went wrong. I am assuming we are blocking some traffic on the firewall or possibly even through a content filter. What I don't know is what url needs to be white-listed or which ports need to be opened for the application to work.
Firewall is off on the pc. I can authenticate when on a standard "outside link" But cannot when the same pc is on the LAN at work. Any suggestions would be greatly appreciated!
This topic first appeared in the Spiceworks CommunityPlease, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here. -
Dear Experts,
I have got Project Server 2013. These projects are migrated from 2007 to 2010 and to 2013. All the functionality working fine as expected, But few schedule got more than 500 lines of Task, We are unable to "Edit" those projects "In Browser".
We have tried in both IE and Chrome, When you try Edit it throws error "Something went wrong, I checked the co relation Id in the logs. I get the below,
02/09/2015 15:08:32.84
w3wp.exe (0x16D8)
0x04EC 0xB217023
ahjqp High
[Forced due to logging gap, cached @ 02/09/2015 15:08:32.70, Original Level: Verbose] SQL connection time: 0.0809460420248942
75f5e79c-783e-a090-5f32-f52e977a9b62
[Forced due to logging gap, cached @ 02/09/2015 15:08:32.85, Original Level: Verbose] The SecurityTokenServiceHeaderInfo including the correlation ID was added.
Batch request was created without a batch name, specify a batch name for better telemetry.
at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
at System.Environment.get_StackTrace()
at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.GetSqlBatchRequest(String batchName) .....
[Forced due to logging gap, cached @ 02/09/2015 15:08:33.89, Original Level: VerboseEx] PWA:, ServiceApp:Project Server Service Application...
the above error repeated more than 100 times
Same thing goes to the below error also
Entering Function=TTaskTable::GetElemProp DynamicLogging triggered SessionID = {EE8AD295-E5AD-E411-943A-005056A95E5E}
Leaving Function=TTaskTable::GetElemProp returning HRESULT:8C010003 SessionID = {EE8AD295-E5AD-E411-943A-005056A95E5E}I really appreciate and thank for
the support. Thanks
Jacob MichaelHi Jacob,
Have you tried re-publishing the projects from MS Project and see if that helps?
500 tasks are quite a lot for the browser to deal with; I usually recommend switching to MS Project when you have that number of tasks for a project
Paul -
i forgot the passcode for restrictions, i read few suggestions here and tried the ibackupbot, but now i cannot find an o my previous backups in itunes.it keeps saying cannot load sync services. i have reinstalled the latest itunes
please helpbut its nothing there, no music, no apps nothing. i had upgraded to iitunes 11 and went back to 10.7 that is when i lost them. apparenty i havent lost contacts, photos.
but i have backed them up previously. i was using ibackupbot and i can see them all there, but i cant install them back to my phone nor to itunes.
Maybe you are looking for
-
Mac mini server error start postgres "CANNOT_START_SERVICE_TIMEOUT_ERR"
Hello, I bought mac mini server this week and I started to configure. I can't start postgres with command "serveradmin start postgres", I have this error: "CANNOT_START_SERVICE_TIMEOUT_ERR" In this discussion Wiki: "error reading settings", Postgres
-
Daily Server 2012 backups to different drives
We have a Windows 2012 server that runs AD and Hyper-V with 2 VMs. Total disk space is 2TB. We have 5x 2TB USB disks that are rotated daily from Monday to Friday. Currently I have a scheduled task that fires off a batch file with the following in it:
-
How to prevent key sound after pressing Enter
I don't want to hear "beep" sound after pressing enter in TextBox object. Is it possible to prevent this? Private Sub TextBox1_KeyPress(ByVal sender As System.Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles TextBox1.KeyPress If e.K
-
Hi, I am fairly new to both iDvd and Imovie. I have a .avi file 700 MB that I want to burn to dvd with iDvd so I can play it on my DVD player. When I try to import this file to a basic iDvd project I end up with a project over 8 Giga bytes, wich of c
-
How to create Recurring Tasks?
I need to set reminders from a Task list to specific people without human intervention. I want reminders for updates every week from the list. Is it possible to do it without using Calendar? My Scenario is as follows: I want a Task to be created in a