Something Went Wrong Trying to install...

I haven't every been able to get AIR to work on my laptop
since it was called Apollo, but I got a bunch of cool links to
stuff at MAX that I wanted to try out, so I uninstalled the AIR
Runtime I had, rebooted, installed AIR 1.5, and now all attempts to
install AIR applications com back with the dreaded "Something Went
Wrong Trying to install this application." error.
I'm running Vista Home Premium, and I did run into a problem
where the HKLM/Software/Classes/.air keys were locked, and after
wrestling with the Registry permissions, I managed to clean that
up, so the installer now seems to be creating and deleting those
keys properly. However, I'm still getting this "Something Went
Wrong" error.
I've created .airappinstall.log and .airinstall.log files in
my home directory, but the .airappinstall.log file remains empty.
The .airinstall.log file shows a successful install of the AIR
runtime.
I've got several .air files that I've downloaded and saved to
my computer, and these seem to suffer the same problems as if I
were using the "Badge" installations online.
If I uninstall the AIR application, and then use a Badge
install to install both the application and the runtime, both
successfully install. However, any subsequent application installs
fail with the same "Something went wrong" message.

Do you have Vista 64bit?
Does this look like your problem?
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=75&catid=697&threadid =1406474&enterthread=y

Similar Messages

Strange solution to "Something went wrong trying to install this application."

Basically the solution was to install
AIR
Beta 3 then install the AIR 1.0, copy "Adobe AIR Application
Installer.exe", "Adobe AIR Application Installer.swf", and "Adobe
AIR.dll" from the C:\Program Files\Common Files\Adobe
AIR\Versions\1.0 directory into the AIR beta 3 directory which I
think was "C:\Program Files\Common Files\Adobe AIR\Versions\1.0.6".
Then, I associated the .air file with the "airappinstaller.exe"
executable located in the AIR beta 3 directory. Amazingly, doing
this allowed me to install the AIR application without any
problems.
The problem this addresses is getting the message "Something
went wrong trying to install this application." every time I tried
to install an AIR application. The exact error message is below. I
assumed that I was having problems because I had installed an AIR
beta in the past. I'm not for sure on that though. The AIR
installer log seemed normal. At least there were not any error
messages that I could see. The AIR application installer log did
not output any data for me. I followed the instructions from
this
blog on setting up the installer logs.
Here is the error message:
Adobe AIR
Something went wrong trying to install this application.
Please install the latest version of Adobe AIR from
http://www.adobe.com/go/getair
and then try again.
OK
---------------------------

Basically the solution was to install
AIR
Beta 3 then install the AIR 1.0, copy "Adobe AIR Application
Installer.exe", "Adobe AIR Application Installer.swf", and "Adobe
AIR.dll" from the C:\Program Files\Common Files\Adobe
AIR\Versions\1.0 directory into the AIR beta 3 directory which I
think was "C:\Program Files\Common Files\Adobe AIR\Versions\1.0.6".
Then, I associated the .air file with the "airappinstaller.exe"
executable located in the AIR beta 3 directory. Amazingly, doing
this allowed me to install the AIR application without any
problems.
The problem this addresses is getting the message "Something
went wrong trying to install this application." every time I tried
to install an AIR application. The exact error message is below. I
assumed that I was having problems because I had installed an AIR
beta in the past. I'm not for sure on that though. The AIR
installer log seemed normal. At least there were not any error
messages that I could see. The AIR application installer log did
not output any data for me. I followed the instructions from
this
blog on setting up the installer logs.
Here is the error message:
Adobe AIR
Something went wrong trying to install this application.
Please install the latest version of Adobe AIR from
http://www.adobe.com/go/getair
and then try again.
OK
---------------------------

Adobe Air on Mac: "Something Went Wrong Trying to Install This Application" Error

I have been reading several posts on this, but nowhere can I find a solution. Within the past few weeks, I receive this error any time I try to install a new AIR application:
"Something Went Wrong Trying to Install This Application. Please install the latest version of AIR from.."
Then it gives me the download link. I've tried reinstalling, but that doesn't fixt the issue. I'm using OS X 10.6.3- is there ANY way to solve this?

Hi Jason. Can you post your install log here so we can take a look at what the problem may be? To see the install log, Open "Console" to view logging. Then copy and paste the log here.
In the meantime, try to uninstall AIR before reinstalling AIR to see if that fixes the problem.
Thank you!
-Lisa Chao
AIR QE

Need help! Something went wrong in iTunes install

During my install of iTunes 7, my laptop overheated and shut down. Now when I try to install itunes it tells me that quicktime.msi is missing and the old copy of quicktime can not be replaced. It won't allow me to uninstall the old version of quicktime and I can't even open iTunes without the new Quicktime. Does anyone have any ideas how to fix this issue?

Now when I try to install itunes it tells me that quicktime.msi is missing and the old copy of quicktime can not be replaced. It won't allow me to uninstall the old version of quicktime and I can't even open iTunes without the new Quicktime.
let's try this first.
Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
Description of the Windows Installer CleanUp Utility
Next, we’ll manually remove leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
once we've got all the existing QuickTime scraped away, let's try a careful standalone QT 7.1.3 reinstall.
download and save a copy of the QT 7.1.3 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1.3 Installers … get the one that doesn’t mention itunes
if that install goes through okay, does an itunes install go through okay afterwards?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)

Can't install widget browser - Adobe AIR, "Something went Wrong . . ."

I'm having trouble installing the widget browser as I get an error:
"Something went wrong trying to install this application. Please install the latest version of Adobe AIR from
http://www.adobe.com/go/getair and then try again." I've included a screen shot at bottom of this post.
I've downloaded the adobe air application and installed several times, but still get this same popup error
message when trying to install the Dreamweaver Widget Browser.
Here are some details of my system:
OS: Vista Ultimate 64bit
Browser: Firefox 3.6.3
Dreamweaver CS5
Adobe Flash 10 installed
Adobe Download Manager installed
Adobe Air installed (per Control Panel -> Programs & Features)

Thank you for your replies and help. I followed your instructions and found that I'm running the current version of AIR:
I couldn't find the version via your first instructions. When I browsed and ran properties on folder 1.0, I was presented with Version folders with different dates, but could find nothing about the current version.
I followed your second set of instructions and was able to browse to the AIR folder and just run the application and browse for the file I downloaded. It worked like a charm to visually show me the version, (first screen shot above).
I'm wondering if it's because I try to keep my C:Windows drive as bare as possible by installing all of my applications on another hard drive. This version of AIR is running on my C drive, yet DW & Photoshop CS5 are running on my "E" drive where there is no folder called "Common Files" for AIR versions.
I've run the command line you had suggested as well in order to keep a log file. I'll pass along the results when I try to install again.

Pls install latest version of Adobe AIR-something went wrong

When I try to open an episode in Photoshop CS5 Feature Tour () http://tv.adobe.com/watch/photoshop-cs5-feature-tour/terry-whites-favorite-things-about-cs 5-design-premium/) an AIR error message pops up saying:
Something went wrong trying to install this application. Please install the latest version of Adobe AIR from http://www.adobe.com/go/getair and then try again.
I have downloaded the program from that site, uninstalled AIR and reinstalled the downloaded version to no avail. It just keeps popping up. I click OK on the pop-up error message and the video plays just fine. But it is an annoying pop-up that just won't go away.
What gives.
Roxy

No, I bloody hate that feature of Vista and turned it off long ago!
I think you’re on the money with the permissions thing because the digging around on the net, which I read seems to points to that.
But as I say there is loads of conjuncture and advice but no solutions
Mike

"Something went wrong" activating 60 min Skype wor...

I am trying to link my Skype account with my office account to activate the 60 world minutes that are included I'm my office subscr.
Always getting "sorry, something went wrong" trying since yesterday.
Solved!
Go to Solution.

I had this same issue in my computer. I tried these steps; repair office, remove and re install office. I have contacted Microsoftlive support they resolved my issue. They told that they removed old office files from registry and re install the office. Now it is working well.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

I tried installing windows and something went wrong and now it seems I have erased Mac OS too because when I turn it on, it says Insert bootable device

I tried installing windows and something went wrong and now it seems I have erased Mac OS too because when I turn it on, it says Insert bootable device. Now what should I do?

Welcome to Apple Support Communities
Press Option key on boot and select the OS X partition. If it isn't here, press Command and R keys on boot, open Disk Utility, erase the drive and install Lion or Mountain Lion

Error message when trying login to Network Monitor "oops something went wrong"

I am trying to get network monitor to work on my network. However, when installed I enter my credentials and get the error something went wrong. I am assuming we are blocking some traffic on the firewall or possibly even through a content filter. What I don't know is what url needs to be white-listed or which ports need to be opened for the application to work.
Firewall is off on the pc. I can authenticate when on a standard "outside link" But cannot when the same pc is on the LAN at work. Any suggestions would be greatly appreciated!
This topic first appeared in the Spiceworks Community

Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

When trying to log into my mailbox I can not do so I get an error message saying "something went wrong try later" is the fault at your end?

I am running Firefox instead of "I E" thinking it was less prone to freezing.
I have "Bing" as my browser. I try to log into my outlook inbox as I normally do but I get a message on screen saying SOMETHING went wrong please try later, What & by whom?
It was working earlier now after waiting then trying several times I still cant.
When I have downloaded "Firefox" it also installs maintenance how do I do such a task when I can not find out where I should do so.
I went to my Yahoo account to see my newsletter from you, there I am able to install the latest "Firefox"
thinking that by doing so I could enter my outlook mail BUT NO

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

SharePoint Online - Trying to add an app from Organization's Catalog causes "Something Went Wrong"

Hi Everyone,
I registered my app with appregnew.aspx, and I uploaded the app file to the app catalog. I even successfully installed my app to the sharepoint site. But when I tried to use it I realized I gave it no permissions.
So I went back to visual studio and gave it some permissions. I uninstalled the app from my SharePoint site, then deleted the app from the app catalog. I uploaded my new version to the app catalog just fine.
Now when I try to install the app I get "something went wrong". What happened?
I also tried another version of the app where I removed all the permissions but that still didn't fix anything. Any ideas on what is happening?
This is an online instance, so I have no access to logs.
120811049008

http://www.sharepoint-zone.com/2014/01/problems-adding-apps-in-sharepoint-2013.html
Make sure you have all placeholders as below:
1. DeltaPlaceHolderLeftNavBar
2. PlaceHolderLeftNavBar
3. DeltaPlaceHolderPageTitleInTitleArea
4. PlaceHolderPageTitleInTitleArea
Also each of them should not be set to Visible=False.
The code for the content placeholders are:
<SharePoint:AjaxDelta id="DeltaPlaceHolderLeftNavBar" BlockElement="true" runat="server">
<asp:ContentPlaceHolder id="PlaceHolderLeftNavBar" runat="server">
</asp:ContentPlaceHolder>
</SharePoint:AjaxDelta
<SharePoint:AjaxDelta id="DeltaPlaceHolderPageTitleInTitleArea" runat="server">
<asp:ContentPlaceHolder id="PlaceHolderPageTitleInTitleArea" runat="server">
</asp:ContentPlaceHolder><asp:ContentPlaceHolder id="PlaceHolderTitleBreadcrumb" runat="server" Visible="false"></asp:ContentPlaceHolder>
</SharePoint:AjaxDelta>
http://social.msdn.microsoft.com/Forums/officeapps/en-US/81bbf8b0-a1e1-45a8-8c37-f50ffaf07587/problems-adding-apps
Apps with autohosted components (including Access apps) actually host their DBs in Azure, though (that's what "autohosted" means) so if you don't have the server connected to Azure then those kinds of apps will fail to install. If the only apps that
are failing are Access/autohosted, then that's probably the issue with your setup. Developing on Office365 would take care of setting that up for you, though.
If this helped you resolve your issue, please mark it Answered

Still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs? by stephenftlaud

still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs? bystephenftlaud

Hi,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Open Console in Applications>Utilities & see if there are any clues or repeating messages when trying to open CS2.

Still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs?

still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs?

Hi,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Open Console in Applications>Utilities & see if there are any clues or repeating messages when trying to open CS2.

Restore iphone 4 to install the ios 5 but something went wrong while doing back up and whenever i connect the phone to itunes theres an error and the phone turn off after 1min

hi guys i just downloaded the ios 5 and while it was doing back up something went wrong and everything were stopped and shows me a message as an error msg and now whenever i connect my iphone 4(32g) to itunes after 1min it goes off and the battery full and the same thing happend again and again can u help me guys plz i only see connect to itunes on the screen no options even

by reset option do you mean the DFU restore? worked for me, have you tried that?
if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update.

HT1267 While upgrading my iPhone 3 to 4.2 something went wrong and would not start at all. When tried to restore after going through th process it comes up with the message "The iPhone could not be restored. An unknown error occurred [1015]." What can I d

While upgrading my iPhone 3GS to iOS 4.2 something went wrong and came up with the message "The iPhone could not be restored. An unknown error occurred [1015]." Now it will not start at all. It just stays on screen with USB and the iTune picture. What can I do to get it going again. I only tried to upgrade because I was prompted to up-grade and now I am helpless. I did a backup before starting the upgrade. The error message did not tell what to do next. Any help is very much appreciated.

Usually that means the iPhone was hacked to unlock it from the original
carrier .
Updating the operating system locks it back to that original carrier
You could try this
http://support.apple.com/kb/TS3281
However if the iPhone was hacked it is probably a paper weight now
and as this is an Apple hosted forum you can get no further help here

Something Went Wrong Trying to install...

Similar Messages

Maybe you are looking for