TS2220 the following message applies to my airport Utility: This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Suppor

This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
This is the message I have recieved in installing my AirPort Utility... Can anyone help me?

Old AirPort base stations and Time Capsules aren't compatible with AirPort Utility 6.2, so you have to use AirPort Utility 5.6. As you have already updated, you can't install AirPort Utility 5.6 by the normal way.
To install AirPort Utility 5.6 on your MacBook Pro, follow these steps > http://frank.is/mountain-lion-and-the-old-airport-utility/

Similar Messages

I get the following message when I open Photoshop: Photoshop detected graphics hardware that is not officially supported...which asks me to "uncheck the use Graphics Processor...but there is no Graphics Processor to check ?????? What do I need to do? I ha

I get the following message when I open Photoshop: Photoshop detected graphics hardware that is not officially supported...which asks me to "uncheck the use Graphics Processor...but there is no Graphics Processor to check ?????? What do I need to do? I have ignored this in the past and Photoshop seems to work OK but still I wonder why this opens every time I start Photoshop. Thanks for considering my question.:>)

As you can see use Graphics Processor is NOT checked. Now what? And a special thanks for answering me about this. :>)
Diana

I am trying to run a CDrom on my Mac, and I get the following message: bdf.classic or bdf.osx not supportebdf.classic or bdf.osx not supported d anymore. How can I fix this.

i am trying to run a CDrom on my MAC and I get the following message: bdf.classic or bdf.osx not supported anymore. How can I fix this and run my CDrom?

I don't think you can fix it. Those messages imply the programs on the CD are older ones for PowerPC Mac (discontinued in early 2006) and does not have the code a current Intel-based Mac requires.

When I go to download my iMovie to iTunes I get the following message "Unable to prepare project for publishing. That project could not be prepared for publishing because a error occurred"(disk full). What do I need to do?

When I go to share my Imovie to Itunes after a couple of hours I get the following message. "Unable to prepare project for publishing. That project could not be prepared for publishing because a error occurred(disk full)". What does this mean and how do I fix it?

This is the forum for iOS (iPhones and iPads),
I have refered it to get moved to the correct forum.
But my guess is that you have to clear space on your harddrive.
The video gets rendered when you out put it, so you will need lots of space to do so.

How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4). Everytime I open the airport utility I get the following message: "
This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
I'm getting the exact same message on my other computer, a Mac Air.
So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
Thanks!

See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

HT4262 This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support.

In my Airport Utility a read the following message:
This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support." What do I have to do ?? I can use my airport.

I assume that your MacBook Pro is running OS X Mountain Lion ... correct? If so, version 5.6 can run just fine on this version of OS X; it just can't be installed in the traditional way.
Here are the basic steps to install version 5.6 under Mountain Lion using CharlesSoft's Pacifist:
If you haven't already download the AirPort Utility disk image file directly from Apple Support Download
Place the resultant AirPortUtility56.dmg file onto your Mac's Desktop.
Run Pacifist.
Click on the Open Package option. Find the disk image file that you just placed on your desktop, and then, click on Open.
The utility is located as follows: Contents of AirPortUtility56.dmg > Contents of AirPortUtility56.pkg > Contents of AirPortUtility56Lion.pkg > Applications > Utilities > AirPort Utility 5.6.app
Drag AirPort Utility 5.6.app to your Mac's /Applications/Utilities folder.
You can now run the AirPort Utility from the Utilities folder.

Problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
If iPhoto is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
http://www.apple.com/support/mac/app-store/contact/

The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.

The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.

Try below steps once
click Gear icon on the top Right corner and Quit Creative Cloud App
Click on Finder and then hold Command + Shift + G keys on your keypad
It will open Go to folder window, type exactly ~/Library and click on Go
Make sure to open ~/Library not /Library ( there will be two Library folders )
Then open Application Support > Adobe folders
Trash AAMUpdater and OOBE folders.
Then launch Creative Could and check.

I receive the following message under Boot Camp Assistant: "Can't install the software because it is not currently available from the Software Update server.

I am trying to install the software drivers for Windows 7 Home using Boot Camp 4 Assistant. I receive the following message: "Can't install software because it is not currently available from the Software Update server." Why is this happening?

You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/

The App Store says I have updates for I-Photo and Garage Band. When I try to update I get the following message: You have updates available for other accounts To update this application, sign in to the account you used to purchase it. I only have 1 acc

The App Store says I have updates for I-Photo and Garage Band. When I try to update I get the following message: You have updates available for other accounts To update this application, sign in to the account you used to purchase it." Both apps came with my computer and as far as I know I only have one Apple account. Any thoughts? Thanks.
Karen

Thanks for you reply. I'm 99% positive that I'm using the user id and password that I used to set up my computer. That's why I'm stumped. I read the solution someone else suggested (type your user name without @gmail and create a new password. When I tried it, I was asked for my birthday. It didn't recognize it. I know I got my birthday correct. Oh well...
Karen

HT3775 I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you.The document "IMAG0026.AVI" could not be opened. A required codec isn't available.

I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you. This is for Quicktime Player.
"The document “IMAG0026.AVI” could not be opened. A required codec isn't available."

Try Perian.
http://perian.org/

Shortly after launching into itunes, it freezes and I get the following message: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. How do I resolve this issue?

Shortly after launching itunes, the program freezes and gives me the following message:A problem has caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. The program then closes, even if I have not completed what I am doing. How do I resolve this problem?

That is what I thought. Cannot figure out how to turn it off, though.
However, when I talked to her over the phone, she is definitely using Firefox. I tried to access her Internet Explorer, but it has been deactivated, I believe by Firefox.
She primarily uses the Internet to communicate with her kids, grandkids, and great grandkids. Her e-mail account is with Yahoo Mail, and she uses Firefox to access it. Occasionally, she uses the web to look up information, and may have downloaded a virus.
Do you think there's something in Yahoo Mail that conflicts with Firefox? Is there some remnant of Internet Explorer that needs to be deactivated? Could she have a virus?
Any information would be gratefully appreciated. I live 7 hours away, and can only help her over the phone. I'm trying to develop a course of action that I can use with her. I know a little bit about Firefox, so need your expertise.

The following message appears when I try to turn on the iPad..."Not enough storage..this iPad cannot be backed up because there is not enough iCloud storage available. You can manage your storage in settings." When I tap Close or Settings nothing happens

The following message appears when I try to turn on the iPad..."Not enough storage..this iPad cannot be backed up because there is not enough iCloud storage available. You can manage your storage in settings." When I tap Close or Settings nothing happens

Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I am getting the following message "safari could not download the file (440MB) because there is not enough disk space. disk utility says i have 249.8 GB of available disk space. any suggestions as to what is the problem would be appreciated

i am getting the following message "safari could not download the file (440 MB) because there is not enough disk space. please delete files or download to another disk." when i check system information it tells me i have 249.82 GB of disk space available. any suggestions as to what i can do to resolve this problem.

don
thanks for your suggestion. that is the same advice that i got from the geek squad at the local apple store.
i did what he instructed but it did not work. i have since called apple support twice regarding the problem. they had me start the computer in safe mode, going into the library and deleting a phlist file (i think) do a repair disk permissions, do a repair disk, empty the cache, and finally the last guy told me to unplug the computer from the wall socket and restart.
when i mentioned the advice you and the apple store guy gave me they sort of poo pooed it saying that was done when they did all this other stuff.
i am now waiting for the download to be completed to see if unplugging the computer had any effect.
thanks again for your kindness in answering my concern.

TS4036 I tried to restore my iPad from the cloud backup but the iCloud returned the following message 'no backup available'? This after happened after I created the backup today and the same was confirmed at the Apple Store attendant

I tried to restore my iPad from the cloud backup but the iCloud returned the following message 'no backup available'? This after happened after I created the backup today and the same was confirmed at the Apple Store attendant

Check the console app to see if there are any error messages. I had one app showing an issue (Pet Hotel) the error was (truncated):
ERROR: Restore message response: 102 rename error: File name too long (63) at path "/var/mobile/Library/SafeHarbor/com.pocketgems.tappethotel/Container/Documents/ savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHis tory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGa meHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/sa vedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHisto ry/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGame History/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/save dGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory /savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHi story/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedG ameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/s avedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHist ory/savedGameHistory/1313349538-pocket_gems_crash_report.txt" (MBErrorDomain/102)
I manually snyc'ed that particular app and then re-ran the restore and am now the proud owner of a working iphone. Not sure it is the same problem or app but looking in the console was the key!

TS2220 the following message applies to my airport Utility: This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Suppor

Similar Messages

Maybe you are looking for