TS3048 my wireless mouse is not working at all. I have changed the batteries and still nothing, not even a flashing green light. I am using someone else's computer to ask these questions as I now can't use mine. Help!!!
my wireless mouse is not working at all. I have changed the batteries and still nothing, not even a flashing green light. I am using someone else's computer to ask these questions as I now can't use mine. Help!!!
I just had the same problem. And I found the solution, on Youtube.
The problem is that these ******** at apple designed the battery compartement, the distance between metal contacts too big.
That means the batteries plus or minus poles are not touching the corresponding contacts in the mouses battery compartement.
Most likely the battery doesn't get pushed up to touch the plus contacts.
I used a fingernail to push the battery up and tadaa, the green LED came on.
The guy in the Youtube video just put some folded aluminium foil under the minus poles for bridging the gap.
See here, "How to fix the Apple Magic Mouse!":
https://www.youtube.com/watch?v=7vlDEVfV45s
Hope this helps.
<Edited by Host>
Similar Messages
-
I have bought the wireless keyboard for my iPad. I was working for a day but now the power light won't stay on and as such won't connect to the iPad. I have changed the batteries but still no difference.
Not knowing which wireless keyboard you bought, it is difficult to be specific. but ...
it is quite normal for the keyboard's power light not to stay on - it is a way of conserving battery power.
Try this:
turn you keyboard off
on your iPad go to Settings > Bluetooth
if your keyboard is listed under Devices, then touch the little blue i to its right and choose Forget this Device
now reset your iPad: hold both the Home and Power buttons down for about 10 seconds until the Apple logo appears, let go promptly when the Apple logo appears and wait another 30 seconds for your iPad to turn itself on
After your iPad is back on again go back to Settings > Bluetooth
now turn your keyboard back on and see if it appeard under Now Discoverable
if it doesn't read your keyboard guide to figure out how to put it into Discovery mode
touch the listing for your keyboard under Now Discoverable, it should now appear under Devices
touch the listing for you keyboard under Devices, and choose to pair with it. -
I recently purchased refurbished Apple TV to save few bucks, but I spend more than what I saved on refurbished one. I would suggest every one not to buy any refurbished product from Apple online store. The remote which come along with the unit is not working at all. I changed couple of batteries as I thought initially that the batteries may not be working but no success at all. I saved $14 on refurbished unit, but in total I have spend $10 to fix the issue but still it hasn't been fixed yet. I have taken an appointment for yesterday at Toronto Eaton center Apple store and again it will cost me atleast $25 again ($15 for parking and $10 for gas as I have to drive from Hamilton).
Does any one else have the same issue like this?Amol Soni wrote:
As I said, I tried everything what the manual says, but hard luck. I have taken an appointment for today, lets see what happens.
Also there is no activity on unit when I use the remote. The unit is stuck on the first page itself where we have to choose the language. The unit seems to be fine to me but the real problem is remote does'nt have activity. The IR is not responding while pressing any of the button.
Good luck with your appointment.
Not much consolation but even new products can have issues and might need a trip to a store to return/replace.
The reason i asked about the LED on the AppleTV is that occasionally it thinks it's paired with a specific remote and ignores others - the unpair keypress I described is quick and free.
AC -
I have been trying to purchase points for a slot machine game using my iTunes gift card. It subtracted the right about of $$$ but never gave me my points....not sure what I am doing wrong.
Any help will be appreciated!Contact iTune Support
https://ssl.apple.com/emea/support/itunes/contact.html -
I cannot get my mouse to work, I have changed the batteries and it still does not work any ideas???????????
Hello:
Try resetting the SMC and PRAM.
Barry -
I have changed my password and still can't get home sharing to work. Get the message "Home sharing could not be activated because the account or password was incorrect." It's what I have used to sign in here! Any help much appreciated.
So I reset my Apple ID password. Which then stopped my MobileMe account from working. Hang on - these were 2 different accounts a while ago, with different passwords!!!
So I have logged back in to MobileMe with my AppleID, and that's working again. After a short wait I can now create Home Sharing again.
Folks, I think we have just had our Apple IDs merged with our MobileMe accounts!! With no consultation or warning.
My guess is that this is the most seamless way for Apple to do it, as the vast majority of people use only one email address and one password for everything. Only those of us who had the same email adress but different a different passwords for MobileMe and Apple ID will have noticed. Annoying for us few, but a clever strategy on Apple's part, becasue we have been driven to fix the issue ourselves by chaning the password, and in doing so we have realised that our mobileme account is now the same thing as our Apple ID. -
My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this?
a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
The discs that come with your Mac are "machine specfic" and cannot be used on another Mac. -
I turn off my whats app lasseen time stamp more than 24 hours ago and now i can't turn it on it sees " could not connect to whats app services please try again latter" i try deleting the app and changing the calendar and still didnt worrk
Ok - an update ...
Managed to get the phone to backup to iCloud, so decided to risk the "Factory" reset.
Took the reset option including delete all data and crossed fingers.
It took a while to resotre from iCloud, but everthing seems to be back and ...
Bluetooth now working agaim.
Backup to Computer working again.
And somewhat to my surprise, GMail in the mail app is working again. (The surprise being that the implication of other posts was that this was a 6.1.3 fundamental bug)
Still no idea why the iPhone was corrupted - but at least the "Factory" reset seems to have recovered the situation. -
i have replaced the batteries and checked to make sure they are installed properly but the keyboard does not stay turned on
Hold the power key on the keyboard down for 5 secs to power off, tap the power button once to start. It should connect automatically.
-
my wireless key board doesn't seem to communication with my computer even though bluetooth shows it is connected. I have changed the batteries on the keyboard and when turn on the key board the green lights comes on shortly and disappears. Can any one help?
Hey Annar99,
I found a few articles that might help with the issue you're encountering. These first two are if the Bluetooth keyboard you're using is the one that came with your iMac. The first is a general "how to" for setting up your Apple Wireless keyboard, while the second one is for troubleshooting if the advice in the first article isn't working:
Bluetooth: How to set up your Apple Wireless Keyboard
http://support.apple.com/kb/ht1809
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/TS3048
If, on the other hand, you're using a third party keyboard, then I would take a look at the following article's troubleshooting section:
Bluetooth Quick Assist
http://support.apple.com/kb/HT1153#Tips
Hope that helps,
David -
My Lightroom stopped working at all. I unistalled the app and installled back a few times and it still won't open.
Are there any error messages? Mac or PC?
-
My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.What can I do?
Hello:
Try resetting the SMC and PRAM.
Barry -
My mouse is supposedly connected, but the cursor won't move. I changed the batteries. What should I do?
Anyone that is trying to help you right now is guessing, you haven't provided any clues such as which mouse you use and which version of OS X you have installed. Without those barest of facts we're giving your WAGs.
-
I have changed the name and password for my Time Capsule and now the Time Machine will not connect
Mac Book Pro
1TB Time Capsule.
Yesterday I changed the name and password on my time capsule and also the name and password of the wifi network as I was having problems with the speed of the internet when using Safari on any of my devices (1 Macbook pro, 1 macbook air, 27" iMac, iPhone and iPad) all other internet services were working fine (email etc.) This seems to have solved the problem.
However, since then, my time machine back ups will not reconnect and there is no option for me to reconnect to the existing back up for my macbook pro.
When I enter the time machine preferences it shows as below that there are no back ups.
Then, when I go to select a drive to use which should be the MacBook under the Backup disks the only option is for me to Remove Disk...
So, my question is, how do I reconnect to an existing Time Machine back up for my MacBook pro as I really do not want to erase and start all over again.
Warning - In my naiveté, I did click on the MacBook in 'Available Disks' but I got the impression that it was about to start a whole new back up and not work with the existing one.
(And does anybody have an inkling as to why there was a problem with Safari on all my devices? I downloaded Google Chrome and that worked fine).Simply reset the Time Machine.
See A4 here http://pondini.org/TM/Troubleshooting.html
You can then mount the TC disk in finder after you reboot the computer.
You should be able to reselect the TC disk and then it will say it is going to start a new backup.
Ignore this.. when the TM actually loads the TC disk it will discover the existing backup and continue the backup.. but it will give no hint until it actually starts that it won't start a new backup. you just have to believe it won't.. and mostly it works..
Please also install the widget A1 so you have some idea what TM is doing. -
I have a ipod touch and it shut off and will not come back on. I have pluged it in and still get nothing what can i do?
Let it charge for an hour or two.
If it doesn't Coe back on, try a Reset.
Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).
Maybe you are looking for
-
2 issues: Some songs skip won't play 2nd issue: itouch will not open itunes
1. Some songs that played well when they were initially added to my ipod itouch, suddenly stopped playing and are skipping to the following songs. How can I fix this? 2. My ipod touch (which is the 1st generation) after updating it to version 3.1.3 w
-
Software upgrade on I mac maverick to Yosemite , locked up? Help
I Am upgrading to Yosemite from maverick i mac 27 flash hard drive 1 year old it has been going 13 hours and seems to be locked up ive tried turning off and on, it just opens and there is a progress bar that is stuck at 1/3
-
Server 2012 HyperV woth Nvidia Quadro 4000
Hi i am looking for a server, where we can use several HyperV's and we want to put in the server a Nvidia Quadro 4000 to add some graphic performance. so my question is whether it will work or not thank u in advance marco --cacciu--
-
When I import some of my cd's they have multiple album images but have just one song from the cd because of a guest performer. How do I keep the cd from "blowing up" like this? eergh
-
WLC4404 with 1242ag Ap Upgrading new 1600 and 2700 Ap
Hi all, Hope all are doing well I have Cisco Wireless Lan controller 4404 with 1242Ag access point i am planning to Upgrade Access point 1600 and 2700 Series Access Point I want know my existing WLC4404 it will support new 1600 and 2700 Access Poin