TS3276 My mail won't send or recieve.

Hi there. When I first got this Mac, it was running fine until this. This has popped up for the past 2-3 weeks, and it's driving me insane. What's happened is that something's screwed up with the server. My mail keeps having those annoying exclamation buttons. I checked the SSL, and it was checked. It now says, "Yahoo! (Offline)", but a second before it said, "Yahoo!". My e-mail on yahoo.com is working fine, but something is screwing up my Mac. Can anyone figure this out for me? Thanks!
~AppleFan17

Also, the error is port 993.

Similar Messages

  • TS3276 Mac Mail won't send emails with signatures

    My Mac Mail won't send emails with signatures. I get the "whoosh" sound and they show in sent mail, but the recipient doesn't receive them until I take off the signature and resend the email. Without a signature, it is received. It never used to be a problem, but started this past month. Please advise!

    Did Earthlink have you try using their authenticated SMTP server?
    If not, try changing Earthlink's SMTP server settings to the following:
    SMTP Server: smtpauth.earthlink.net
    Server Port: 25 or 587. Assuming Earthlink is your ISP, 25 should work.
    Use Secure Sockets Layer (SSL): Off or not selected.
    Authentication Type: MD5 Challenge-Response. Not sure if this authentication type is available with 10.2 and if not, select Password.
    User Name: Your entire Earthlink email address.
    Password: The password for your Earthlink email account - the same password used to check the incoming mail server for new messages.

  • TS3276 The mail won't send.  The activity window shows 2 gmail connections with one indicating a green and the other just sits there unable to connect with spinning wheel.

    My Gmail won't send messages. I used the activity doctor to check what was going on and it lists 2 gmail connections.  The first seems to be fine with green light.  The other just sits there with spinning wheel trying to connect.  I'm not sure what that means but it seems to be hanging up my mail from sending.  Please help.  Bob

    Gmail Settings
    For the SMTP, try using Apple Token instead of the password.
    Mail Server Information

  • Mac mail won't send to aol addresses any advice?

    mac mail won't send to aol addresses any advice?  i can't figure this one out!  thanks.

    Hello, mrselisec. 
    Thank you for visiting Apple Support Communities. 
    I would need more information regarding exactly what is happening when you attempt to send to an AOL email address to better assist you.  However, he are a couple basic troubleshooting guide that may help with this issue. 
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    iCloud: Troubleshooting iCloud Mail
    http://support.apple.com/kb/ts4002
    Cheers,
    Jason H. 

  • Mail won't send says no outgoing server

    I changed my passwords for mail....
    Now my mail won't send
    I did go in and change my passwords
    but still won't send
    Says my connection offline
    I go to connection doctor and says they are connected.....
    Any ideas?

    Hi bearbean!
    Here is an article that will help walk you through some troubleshooting steps for this issue:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Mac mail won't send

    Imac mail won't send messages

    See if this helps. I recieved this from Comcast back in November 2012, but may have something to do with it.
    Dear Valued XFINITY Internet Customer, 
    Action Taken:
    On August 1, Comcast announced that we will no longer support the use of port 25 for sending email. Many older email clients (such as Outlook Express) default to using this port to send email. Please read this message to understand how this action may impact your ability to send email, and what you should do next. 
    Comcast Webmail Users:
    If you use a web browser to access Xfinity Connect or other webmail service, this action will not affect your ability to send or receive e-mail. 
    Email Program Users (Outlook Express, Outlook, MacMail, etc.):
    If you use an email program, this action will disable your program's ability to send email until you change your email program settings to send email on port 465. To protect your email security, click on the link for your current email software, then follow the step-by-step instructions to change your settings.
    Outlook Express
    Outlook 2003
    Outlook 2007
    Outlook 2010
    Windows Mail
    Mail (Apple OS X)
    Don't see your email software? Then locate the preferences for your mail account in the software you use and provide the settings listed on this page. Prefer professional tech support? A highly trained, Tech Expert can remotely change your settings to secure your email. To find out about one-time service and fixes, please call 1-877-550-0793 or visitxfinity.com/SignatureSupport. If you are not using Xfinity Connect and use another email provider, please contact your provider for its recommended port settings. Most email providers offer an alternative to port 25 for sending email. If you have additional questions please visit our Help and Support site or our Customer Forums where many questions are discussed and answered by the Comcast community. Thank you for choosing Comcast! Sincerely,
    Comcast Customer Security Assurance

  • HT1338 mail icon not in dock mail won't send a pop down dox appears and when message placed a black dot appes=ars on red dot appears and then the message will go into draft ?

    mail icon not in dock-  mail won't send - a drop down small box appears and when a message is typed in to sent the send icon goes grey and a black dot appears on the red dot in top left side of box and the message will be sent to drafts only

    Hello Bill,
    Who is your eMail provider, the part after the @ sign?
    In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
    Then click the Show Details button & Check again.
    Mail: Can't send messages, "Cannot send message using the server smtp.xxxxx.com" alert appears...
    old: http://support.apple.com/kb/TS1482

  • Apple Mail won't send invitations when initially closed

    I just started using iCal to send invitations for appointments through Apple Mail. When Apple Mail is opened already when I create the appointment and click Send in iCal, it works fine. The mail is sent and delivered to the appropriate address.
    But if Apple Mail is closed initially, the application starts and the invitation is queued up in the Outbox but is never sent. I can manually open up each invitation in Mail and send them individually, but why is the behavior different? Whether Mail is opened or closed when I send an invitation, it ought to deliver the invitation automatically. By not being sent, I may not realize the invitation hasn't been delivered, making the process very error-prone. Is there a way to guarantee the invitation actually gets sent without having to check the Outbox every time?
    Is this an iCal bug or an Apple Mail bug? I saw no settings in Apple Mail for sending messages at shutdown or any other setting like this. Instead, these invitations may end up being buried in my Outbox for a very long time before I notice and by then, it may be too late.

    ronright wrote:
    Since I bought a new modem/router (Netgear n600), my Apple mail won't send e-mails. It will receive. My ISP is AT&T & the email accounts are via yahoo. I have a Macbook Pro with a recent OSX.
    The most recent OS is currently OS 10.8.3.  Your system profile confirms you are still using Mac OS X (10.7.5).  If this is incorrect, please correct your profile so that you will get the correct troubleshooting suggestions/solutions. 
    Also, post in the OS/Mail forum of whichever OS is currently installed on your MBP.  It's where the OS/Mail expert helpers hang out at. 

  • Mail won't send without Connection Doctor having to be launched.

    Mail won't send without Connection Doctor having to be launched. After running Connection Doctor, it will send, so settings all must be ok. But 15 minutes later, I need to "check again" to send mail. I read previous posts on this from a few years ago, but my laptop is running Lion.

    Try just watching the "Activity" window to learn what is happening to your mail - I have found it to be most enlightening.

  • Mail won't send but Connection Doctor says smtp account OK.

    Mail won't send but Connection Doctor says smtp account OK.
    I can receive mail but can't send it from Mail 3.5. Same problem on a wired G5 and on a wi-fi MacBook (using the same account), so not hardware related. Worked fine 'till today - I didn't change anything in between times. Incoming mail no problem. Tried mail rebuild, keychain first aid, deleting the account, repair disk permission - doesn't help.
    Mail's connection doctor says "smpt.xxxxxx - connection to server succeeded, no login required."
    Anybody any ideas? Thanks, N

    Been having the same problem for a few weeks now. This has been working just fine, and all of a sudden - nothing. The update to 10.5.6 didn't do anything to fix this either.
    I've spent numerous hours on the phone with the Apple support. Seeing as the two other accounts that I have configured work with no problem, they say that this is a problem with the provider which is also the ISP. I then called the support line for the ISP and informed them of this and they say that it's a problem with the software.
    Interestingly, if I send a message to somone with the same ISP, the message will go. But I can't send a message outside of the provider. Does anyone else have this problem?
    Also, from another forum, they suggested rebuilding the LaunchServices database. The Apple support didn't see what that would do. But I tried it anyway and the problem still exists.
    Another intesting thing is certificates. It's only happened twice, but I've received the message saying that Mail can't verify the certificate XXXXX which validates the identity of the smtp. Anyone else get this? I thought perhaps I could delete the certificate and it would magically reappear. But when I go into KeyChain, the certificate is listed only under System Root and I can't delete it.
    ideas?

  • Mail won't send - why?

    Mail won't send from either account my husband has on his iPad; mine won't send from pop account away from home.

    Mail won't send from either account my husband has on his iPad; mine won't send from pop account away from home.

  • Mail won't send from photos in iOS 7

    Mail won't send from photos or from notes in iOS 7

    What did you do to fix it. My email that I create goes immediately to drafts and won't even show in the outbox. Could you let me know what you did to fix it ... please???

  • My mail won't send...

    Hi,
    My mail won't send on my laptop.  There is spinning next to "Send" but the message remains in the outbox.
    I deleted and readded all email accounts.  This did not solve the problem.
    I started a chat with Apple Express support and they said that Lion doesn't support Apple mail so they couldn't help.
    I can send via webmail.
    I can receive mail.
    One error message I receive after it has tried to send the message for awhile is:
    Connections to the server “mail.smtp.me” on the default ports timed out.
    Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent.
    My password and username are correct; however, the following error message appears in the Connection Doctor window:
    Trying to log in to this SMTP account failed.  Verify that the username and password are correct.
    Does anyone have a real fix for this issue-it doesn't happen all the time, but has been happening every day for the past week and I need a reliable program to send mail.
    Thanks.
    lsb

    Becky,
    Check your smtp server and check if your password is added. After ungrading Mail might have lost the password. 

  • Mail won't send.  dotMac SMTP server Issue?

    Using 10.4.8 and Mail. Mail won't send. Says to try a different server, but I don't have anything other than dotMac. Others are having the same problem. Anyone know a solution?

    Who is your Internet Service Provider? What is your current SMTP setting?

  • Mail won't send to Yahoo Japan

    When I try to email my boyfriends PC, Apple mail will not send the message. It tells me to ensure I have entered the address in correctly, which it is, but it will never send the email.
    His PC address ends with @yahoo.ne.jp
    but I can email his phone address, which is @d8.dion.ne.jp
    Anyone know why Apple mail won't send to yahoo?

    For some reason, Mail prevents sending to multiple
    addresses (if they're in a group) if you've indicated
    in "preferences" (under "composing") that you do not
    want addressees' names to be shown in the "to" field.
    The only way to send to a group is to allow the names
    to be shown.
    I, and others, have mentioned this ever since Mail
    arrived. Apple has not yet fixed the
    bug.
    This royally bites! I had this same problem before, and was told that by upgrading to Mail 2, (Tiger), it would fix this!
    I sure as heck don't want all the names listed, that is very unprofessional.
    Will it work if the addresses are "shown", but are in the BCC window?

Maybe you are looking for

  • Determining Data transfer rate through modem in java

    Hi, I want to write an application in java which will communicate with connected modem of the system and it will detect the data transfer rate. I want to know how much data is transferring(upload/download)through modem and in a specific time how much

  • Sharing multiple hard drives to windows

    Hello all. I have a PowerMac G4 with 4 Internal hard drives. When i connect via windows to the mac via networking, I can only ever access my user account ie - i can only see 'username' and desktop/movies/music folders etc how do i set up the powermac

  • BT log-in: ID field reveals password

    I just attempted to log in to MyBT using the usual ID (call it "florence") and the old password (call it "jenkins") - doh... senior moment. Failed. Tried again and inadvertently started entering the p/w in the ID field, as soon as I entered "j", up p

  • About wls6.0 servlet mapping

              I do the wls6.0 servlet,I copy wls example helloservletExample in           the mydomain\application\DefaultWebApp_myserver\web-inf\clsses\           and modify the xml file           <?xml version="1.0" ?>           <!DOCTYPE web-app PUBLI

  • SAML assertion attributes and Web Services

    Just want to clarify for myself something about SAML token within Web Services Security. As I understand SAML attribute assertions cannot be used within Web Service business logic tier because all security header information are unavailable within We