TS3276 why does it take a lot of time to fetch my mails from yahoo server whenever i open the mail icon?

why does it take a lot of time whenever i open mail icon from yahoo server?

Go to Mail Preferences > General Tab > and the second line should say how often it will check for new messages

Similar Messages

Why does it take so long to back up whilst im updating from 4.3.5 to 5.0?

Why does it take so long to back up whilst im updating from 4.3.5 to 5.0?
its been on for ages and its not even a quarter of the way backed up!

The Brave New World of AC wireless networking.. where the reality falls far short of the hype.
Unfortunately in an actual transfer situation, the signal to noise of wireless (RSSI figure drops dramatically), It simply uses AC as a link speed but speed is always renegotiated during an actual file transfer.. to some sustainable level. I suspect that level is not AC wireless but N.
It does matter if you run older devices.. nothing with a or b or g wireless should be running in your house. Even n wireless may cause issues.. try turning everything else off and see if you get speed lift.
As far as the time required for a clean up, is this a first backup as they always take a significantly longer time. Once you are doing regular incrementals the time is usually very short.

Why does it take me so long time to migrate from my old Mac

Why does it take me so long time to migrate from my old Mac?
I just bought a new MacBook Air and using an ethernet cable to migrate all material from my old MacBook Pro, it has now taken med 4 days
and still not done? What am I doing wrong?

Thanks for that gbrenik.
Don't really wanna start reloading all of Lion, but read somewhere that I should start the migration by restarting my source Mac by holding down T during startup, that would do the trick. Is this what I have done wrong?

Why does it take apple tv 5 hours to download a movie from itunes?

Why does it take itunes 5 hours to download to apple tv? What have I done wrong?

it may have to do with the download speed you get out of your internet connection. go to Speedtest.net and find out.

Why does it take so long for time capsule to find my wireless printer?

Since I hooked up Time Capsule, it takes forever to find my wireless printer. Why is that?

Did the Traceroute from the Network Utility Software and got the following results; however, not sure I know what I'm doing after that. Sorry. My printer IP address is: 10.0.1.7. The only other thing that attaches to my wifi is my laptop (macbookpro) and occassionally my wife's IPAD.
Traceroute has started…
traceroute to 8.8.8.8 (8.8.8.8), 64 hops max, 72 byte packets
1 10.0.1.1 (10.0.1.1) 3.640 ms 0.623 ms 0.672 ms
2 192.168.7.254 (192.168.7.254) 1.186 ms 4.156 ms 1.181 ms
3 * * *
4 * * *
5 * * *
6 * * *
7 12.83.39.9 (12.83.39.9) 32.679 ms 29.589 ms 31.042 ms
8 gar23.dlstx.ip.att.net (12.122.85.73) 38.842 ms 37.890 ms 39.086 ms
9 12.249.185.238 (12.249.185.238) 95.350 ms 92.777 ms 138.729 ms
10 72.14.233.65 (72.14.233.65) 38.310 ms 38.050 ms 38.869 ms
11 72.14.237.215 (72.14.237.215) 40.090 ms 39.652 ms
    72.14.237.219 (72.14.237.219) 40.085 ms
12 216.239.47.121 (216.239.47.121) 45.681 ms
    209.85.243.178 (209.85.243.178) 47.084 ms
    216.239.47.121 (216.239.47.121) 46.663 ms
13 216.239.46.59 (216.239.46.59) 45.975 ms
    216.239.46.61 (216.239.46.61) 45.675 ms
    216.239.46.63 (216.239.46.63) 45.227 ms
14 * * *
15 google-public-dns-a.google.com (8.8.8.8) 49.209 ms 46.459 ms 44.742 ms

Why does it take 2 or 3 minutes to access a url from a hyperlink in a pdf document?

With either Adobe Reader locally or the plug-in on a website, it takes a huge amount of time for a url called by a hyperlink in a pdf document to appear in a browser window. Can anyone explain why this happens and, hopefully, how to fix it?

Yes, sorry about that. I am using Win XP Pro and Adobe Reader 11.0.08 and plug-in 11.0.07.79. The browser is Firefox 35.0.01. The problem goes away if I disable the Adobe plug-in and use the native Firefox pdf handler. The same problem also occurs in Safari for Windows.
During the delay between clicking the hyperlink and the target url's being displayed, the "not responding" error appears for the browser in question.
This happens on both my desktop machine and my portable (also running WinXP; the Adobe plug-in is 11.0.8.4)

Why does it take a very long time for shows to post to VOD?

A lot of programs say they will be on demand the following day. This isn't true. Seems you have to wait a week or longer for shows to post. Why? Comcast would usually be by 4:00 PM the following day. When you miss something and want to catch up on it you have to wait, and then the next show is already being shown by the station. It's a pain. I know I can get a DVR but that costs more $$$. If you advertise your VOD to be current then be current.

Since the Verizon Forums are for users to help other users, I doubt you will get any definitive answer. We customers simply do not have access to any information on how Verizon handles VOD.
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248

Why does it take over 2 minutes to get a database connection from the DataSource?

Hello,
It is taking over 2 minutes for my application to get a connection from a registered DataSource in iAS 6.0 sp4 on Solaris. The proper results are returned it just takes 2 minutes to establish the connection. The DataSource is an Oracle 9i database. I have the 9i drivers in the classpath. I also have a registered datasource that is an Oracle 8 database and have no problems establishing a connection quickly to that database. As an aside I have setup this application on JBOSS and both datasource's return a connection very quickly. If anyone has any ideas about what might be going on please respond. This issue is holding up a production release.
Here is the code:
try {
log.debug("getting a new initial context");
ctx = new InitialContext();
ds = (DataSource) ctx.lookup(bundle.getString("IW_DATASOURCE"));
log.debug("after looking up datasource from initial context");
} catch (NamingException e) {
log.error(e);
throw new FinstarException
(bundle.getString("E-0001"));
try {
log.debug("about to get connection");
conn = ds.getConnection();
log.debug("after getting connection");
Produces this in the logs:
2002-05-29 08:55:12,859 DEBUG org.mitre.mii.project.finstar.FinancialSummary - about to get connection
2002-05-29 08:57:24,963 DEBUG org.mitre.mii.project.finstar.FinancialSummary - after getting connection
Here is the datasource registration file:
<ias-resource>
<resource>
<jndi-name>jdbc/pdc/IWDataSource</jndi-name>
<jdbc>
<database-url>jdbc:oracle:thin:@xxx.xxx.org:1521:acisdb</database-url>
<datasource>jdbc/pdc/IWDataSource</datasource>
<username>XXXXX</username>
<password>XXXXX</password>
<driver-type>OracleThinDriver</driver-type>
</jdbc>
</resource>
</ias-resource>

Have you tried to eliminate everything extraneous. In other words, do you experience the same delays with a simple Java program (no lookups, JNDI) that loads the drivermanager and creates a connection.
Do you have access to a traciong JVM or some program that captures run-time execution timing information? Even without the source, this will tell you the specific class::methos where time is spent so you can better determine where the delay is ocurring.

Why does it take so long to download movies and tv shows from itunes

I can download songs pretty quickly from itunes, but movies and tv shows take anywhere from 12-24 hours. Is there anything I can do to speed this up?

If you are downloading at work more than likely your bandwith is being throttled by your company. If your using a Mac, download a little utility called "MenuMeter" It runs in the menu bar and will display your connection speed.If your on a windows machine similar utilities are available as well. Once you find out what your speed is.it'll be much easier to trouble shoot!

Why now in or new iMac there is a folder for bulk mail from yahoo? What it's "bulk mail"

How to erase yahoo bulk mail folder and why you need one?

I talked to my service provider and he told me this:
When the apple mail program sets up automatically it does so with imap and not pop 3. In doing so it creates that bulk mail add on.
I don't know why but I think it is an Apple issue.
I simply just don't use the apple mail program and downloaded thunderbird instead.
Maybe someone who has apple support can contact therm and find out what is going on.

Why does it take so long to download a podcast on Mac as opposed to iPhone?

Performed a speed test of ISP and results were roughly 40/40. Why does it take 3 hours to download a 22MB podcast on iTunes via Mac?

I have the exact same problem. I purchased apple tv several years ago, and every time I go to rent or buy a movie it takes anywhere from 3 to 7 hours to download the movie. There is no spur of the moment "hey lets rent a movie tonight" because I know it will take overnight to complete the download. I've checked my internet speed and it spot on. I've noticed other threads with people having the same problem but no one seems to have a solution.

Select of database takes a lot of time

Dear all,
myabe its a simple question but it is not for me. I do select the FAGLFLEXA table (standard table) and it takes a lot of time.
here my selection:
select * from faglflexa into table gt_flexa
   where    docnr in   s_belnr
    and     rbukrs eq   p_bukrs
    and     ryear eq   p_gjahr.
Maybe its better to select all keyfields YES it is, but I need all data of the selected data . Now my question is: It is also possible to active a indices for this standard table ? when yes how it is the best way to do this ?
best regards
Moderator message: this has been discussed many times, please search in the ABAP performance sub-forum.
Please Read before Posting in the Performance and Tuning Forum
locked by: Thomas Zloch on Aug 12, 2010 3:13 PM

Of course you can add an index - the best fields depends on your WHERE clause and field usage. How broad is the doc number selection? Have you traced the selection? It doesn't really make sense that you'd need a secondary index with those fields unless you're not using the DOCNR specification or it's very broad.

Why does my iPod touch take a lot of time to update and download apps? I got the one of the fastest wifi

Why does my iPod touch take a lot of time to update and download apps? I got the one of the fastest wifi

Try this:
Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.

Why does it take so long for the iPhone to recognize when space has been freed up for photos?

The short story:
I try to take a photo using the built in camera app. I get the dreaded 'no enough storage' message.
I then delete a bunch of photos, podcasts, etc. effectively freeing up plenty of space to take a photo.
Nope - iPhone Camera still things there is no space available.
After some unknown time delay - 10 minutes or more, in many cases, it will FINALLY let me take a photo.
The longer and more detailed story:
I know EVERYONE gets this message at one time or another and I know how to resolve it: "Cannot Take Photo - There is not enough available storage to take a photo. You can manage your storage in Settings."
Fine. I understand that. I'm out of space on my phone (not iCloud, as some users seem to confuse). It's a no brainer - you don't have enough space on your phone to take a new picture. Again - fine, I get that.
What I DON'T get, and what drives me absolutely NUTS, is that I will then go through my photos and delete a dozen or so that I don't really want, easily freeing up a good 20Mb or more, then when I try to take a photo again, I STILL GET THE out of space MESSAGE! Baloney. I am NO LONGER out of space. iPhone, you incredibly well designed and intelligent piece of hardware, why, for the love of all that is good, can't you figure out that I know have 20Mb free?
So, then I'll jump over to Podcasts, which I love, but take up lots of room on my phone. I'll delete a few of the large ones I've already listened to, easily freeing up a few HUNDRED MEGABYTES. We should be good to go, right? WRONG. The iPhone genius still tells me I don't even have enough space to eek out one lousy photo.
If I let my phone sit there long enough -- 10 minutes, 30 minutes, a few hours -- I haven't determined when the magic happens -- eventually the iPhone realizes that 'Hey, the user just deleted a bunch of junk and, wow, I'll be a son of a gun -- there IS enough space now to take a photo. iPhone -- happy!'
Thanks for nothing, iPhone. By this time, my daughter has stopped doing that amazing cute thing that I wanted to capture forever and quite possibly spawn the next generation of 'Charlie Bit Me' parodies. I freed up 500 Mb of prime photo snapping space 20 minutes ago. Thanks for finally realizing it. I realize you can only do like 170 quadrillion calculations a millisecond. I realize these things take time.
Can one of you iPhone engineers please, for goodness sake, please explain to me why this INFURIATING and seemingly unnecessary delay exists? I am no Windows fan boy but I can sure tell you that when I'm running low on hard drive space on my laptop and then delete 1GB of files, that 1GB INSTANTLY becomes available to me. I don't have to wait some interminable timeframe until it magically is usable.
One last thing that is puzzling -- so the native iPhone camera will refuse to let me take a photo because it things we're out of space (when we're not) but any third party photo app, like Camera+ or Camera Awesome, will happily snap pictures all day long. In fact, once I've taken them using one of these apps, I can then SAVE THEM TO THE CAMERA ROLL!
By the way -- when I started this well thought out rant, my iPhone said it was out of storage, and now, five minutes later -- you guessed it -- still out of storage, despite the fact that I deleted 10 photos and 4 podcasts.
So. Incredibly. Infuriating.
For you iOS 7 users, please let me know if this issue has been resolved at all with iOS 7. I've held off upgrading because iOS 7 messed up a bunch of things with the camera, at least on my wife's iPhone 5. Focus no longer works reliably -- touch to focus and touch to expose no longer work well -- the quality of photos took a big hit. I won't update until these issues have been resolved.

Thanks @pdroth. I did a quick Google search of DB indexing. I'm not sure I found exactly what you were referring to but I see where you're going with it. I can understand that indexing my database of stored photos can be time consuming. It's frustrating that the space can't be recognized as being free more quickly.
I notice that some items I delete seem to free up the space much more quickly. Removing an app entirely or deleting from my Music generally shows up as available space in Usage pretty quickly.
Deleting a photo or video from the Camera Roll will take MUCH longer, so I guess that has something to do with the indexing process you are referring to.
I'd like to point out that when I run out of space on an SD card on any budget point and click digital camera that I can quickly delete a picture or two and INSTANTLY be able to take a couple of new photos in their place. I guess I just have that same expectation for the $500+ engineering marvel I have in my hand right now.
Thanks for chiming in.

What's wrong with this Forum? Why does Adobe take so long to reply to posts?!

What's wrong with this Forum? Why does Adobe take so long to reply to posts?!
This is actually "specific" to this Photoshop Forum.
I typically get responses back from other Adobe forum promptly.
Chime in.

The Adobe engineering folks DO duck in here from time to time - and that's a BLESSING! Please name any other big company where you get to interact with the engineers AT ALL. I can't. But I suspect the engineers actually have a lot oof real work to do, and their time here is necessarily limited.
Your comments are more along the line of "I pay a huge amount, for that I expect better support". These are very valid comments. But reality is different from what we may expect, and this forum is not the place to expect Adobe support participation AT ALL. In fact, the technical support people at Adobe often direct users to come here (something I've always found amusing).
At the higher level, Adobe may simply not be spending enough on support for literally millions of users. Is is greed or smart business to try to minimize support cost? That's up for individuals to decide.
I suggest you write a snail-mail letter to the Adobe president if you're not getting the support you need.
-Noel

TS3276 why does it take a lot of time to fetch my mails from yahoo server whenever i open the mail icon?

Similar Messages

Maybe you are looking for