TS3376 After the last update from find my iphone app i cant locate my device anymore does anyone have a solution im using ios 6.1.1! Thanks

Just to add that everything worked just find before i updated the app,after the update i wasnt able to locate my device

Try force closing the Find My iPhone app by double tapping the home button, locating Find My iPhone in the list at the bottom, tapping and holding it until it wiggles, tap to close it, then tap the home button again.

Similar Messages

  • TS4062 Ever since I uploaded the new itunes version, I've been getting this message when I plug in my ipod.  "itunes cannot connect to this iphone. An unknown error occured 0XE80000065."  Does anyone have a solution.

    This is the error I get.  I did not find this on the itunes webpage...
    "itunes cannot connect to this iphone. An unknown error occured 0XE80000065."  Does anyone have a solution.  I am not connecting an iPhone, but an iPod.  I cannot therefore sync my iPod to my iTunes.

    Hi prolough,
    Here is a link that should help:
    http://support.apple.com/kb/TS3221
    Cheers,
    GB

  • Before updating the software om my iPhone 5 to iOS 7, it were possible when adding new contacts to mark them with 'iPhone, fax, mobile etc.' Now it is not possible to select iPhone anymore, does anyone have a solution or know what is wrong?

    Any one have a solution on my problem?

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • IOS6 update Maps do noy integrate or work properly with Rocanda Land Tracker Does anyone have a solution to this horrible map upgrade?

    Installed the IOS6 Uodate on both my Iphone and Ipad.
    Have found the Rocanda LSD finder and land tracker apps to not integrate with maps properly.
    I use these applications constantly as I am a driver in the oilfield.
    This update has made my Rocanda useless. It will not save a converted LSD location
    and use another LSD location to show directions on the maps.
    This used to work perfectly and was a valuable tool.
    Can anyone tell me how to repair this?

    Speaking as someone who happens to be named Michael Broughton ;), let me note that I did not depend on trying to parse the OWB runtime repository to determine the last run status for a given mapping. I used a set of our own tables that we use to audit various processes that run against our database.
    Similar to you, we had the notion of a master process and sub-processes. So, our load could be described as:
    Insert master process row with status "Started".
    For each mapping to execute:
    insert a sub-process row with status "started"
    if the last run of the master process ran to "COMPLETE", or the last run of this master process ran to "FAILED" but there is no row for this sub-process with status "COMPLETE", then we need to run the process. run it and update the sub-process row with the return status. If status <> OK, then update master process to status "FAILED" and exit.
    otherwise, If we determined that the mapping did not need to be executed, then update the sub-process row with status "COMPLETE"
    We put in the stubs for the processes whether we need to run them or not so that if the load fails multiple times, each run will contain the complete list of mappings that were completed.
    In point of fact, if you insert the stubs when skipping over mappings during a restart then you can condense the "do I need to run this time" logic to: Run allways unless the last master process run failed but this process succeeded.
    How you want to code that query will depend entirely on how you are saving your data.
    Hope this helps. I'd offer code snippets but I away from my work 'puter 'til next week.
    Mike

  • After the last update from firefox I cannot play games in pogo how do i fix this?

    I have been using firefox since I got my new imac. Since about 2 weeks ago when firefox updated I can no longer play games on pogo. How do I fix this problem?The pogo web page loads but it won't let me load the games.

    I had the same issue. I reinstalled FireFox 3.6.10 and that solved it for me. You can get 3.6.10 here:
    ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/3.6.10/mac/en-US/Firefox%203.6.10.dmg

  • My iPod Nano 6th generation doesn't seem to recognize album artwork. I've downloaded the artwork manually, and I've even restored my iPod to defaults several times, but nothing works. Does anyone have a solution?

    My iPod Nano 6th Generation is not picking up album artwork. On several of my tracks, it recognizes the album art, but it doesn't seem to recognize the others. I've tried uploading the artwork onto several albums manually, I've cleared the downloaded artwork to download them again, I've even restored the iPod to its default settings...nothing seems to work.
    Does anyone have a solution to this

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on anoterh computer to help determine if you have an iPod or computer problem.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • After the last update(7.1.2) i couldn't find personal hotspot in my iPad 2.

    after the last update(7.1.2) i couldn't find personal hotspot in my iPad 2 Wifi+Cellular. I did everything like reset network setting, restore to factory setting and set up as a new iPad but no change. My iPhone 5's carrier is 16.2 and after update to 7.1.2 it automatically ask me for carrier update but my iPad 2 ask nothing and the carrier is 16.1. Please, help me to solve this problem.

    The Personal Hotspot feature is not available on the iPad 2. I have no idea how you could have been using it before as you claim. BTW, your screenshots do not show up.
    System requirements
    The table below lists the iPhone and iPad (Wi-Fi + Cellular models) capable of Personal Hotspot and which connections they can use to share cellular data with another device:
    USB
    Bluetooth
    Wi-Fi
    iPhone 4 or later



    iPhone 3GS and iPhone 3G*


    iPad (3rd generation or later) Wi-Fi + Cellular



    iPad mini Wi-Fi + Cellular



    * On iPhone 3G, Personal Hotspot is referred to as Internet tethering.
    To connect to a Personal Hotspot, your device requires:
    Wi-Fi: Support for 802.11g/n using WPA2 encryption.
    USB: Mac or PC with iTunes 9.2 or later installed.
    Bluetooth: Mac OS X v10.4.11 or Windows.

  • After the last update of itunes I seem to have lost all my music (Cds that I had downloaded into itunes) except the once I had purchased from the itunes store. Can anyone help? Do you know what might have happened?

    After the last update of itunes I seem to have lost all the music that I had downloaded from my Cds. It was a lot of music! All I still have is the music that I had purchased in the itunes store. And before you asked. No, I did not have a backup. Never got around to do it.
    Does anyone of you have an idea if and how I can maybe get my music back?
    Your help is very much appreciated. Would it help if I recover my computer from an earlier date?? I am not even sure if I make sense here.

    Hi - I seem to have a similar problem. I was prompted to update to iPhoto 11 yesterday (don't know why yesterday, I'm in iPhoto all the time). So I followed the instructions, library updated, all existing events and albums are there. I uploaded some more pictures and created a few new albums and did some new year spring cleaning, moving stuff around etc. And I started making a calendar.
    I've opened it up today, my calendar is still there as are all the new events, but the pictures are empty outlines. If I open up a picture I just get the "!" but I can still see the thumbnails showing in the slider in the bottom - I don't know if that means the source files must still be there somewhere, or if it just means it captured thumbnails yesterday.
    I've gone into it via "show package contents" and there just don't seem to be any masters for an upload yesterday. I also just had a look in the last import folder, because of a comment from someone above. As I scrolled down through the folder the images were there and literally disappeared in front of me - by which I mean, the thumbnails were there as I scrolled down and then would turn into empty outlines...!
    All my old folders are still there, thankfully (although they're of course the ones that are also all safely back up).
    Although I have a timecapsule, my photo library is too big to keep on my hard drive, so I keep it on an external drive - so it only gets backed up when I do it manually (thanks Apple for that, I will never understand why it was designed to work - or not work - that way). So if the pictures have been lost then they are gone for good which is super-frustrating (I just got back from South Korea and was in the middle of sorting out all my shots from that trip).  It seems that this can only have happened because of the update - I should have known better than to have pressed yes.
    If you have any ideas, I'd be most grateful!
    Regards
    R

  • After the last update of Firefox, my toolbar menu became blank but the bookmarks are still available from a pulldown menu. I want the on the toolbar like they used to be. How do I recover this?

    After the last update of Firefox, my toolbar menu became blank but the bookmarks are still available from a pulldown menu. I want the on the toolbar like they used to be. How do I recover this?

    ''Attaboyslim wrote:''
    I am locked into firefox.
    If nothing happens when you press the F11 key, check if you have the same problem in Safe Mode.
    * [[Troubleshoot Firefox issues using Safe Mode]]
    ''Attaboyslim wrote:''
    I'd like the old browser please.
    * [[How to make the new Firefox look like the old Firefox]]

  • I can't synchronyze my contacts with my Iphone after the last update and I lost all my contact I can't find them I suppose they are stocked in my ICloud but I am not sure what I should do ????

    I can't synchronyze my contacts with my Iphone after the last update and I lost all my contact I can't find them I suppose they are stocked in my ICloud but I am not sure what I should do ????

    Hi jandroantonio,
    Welcome to Apple Support Communities.
    It sounds like your iPhone update may not have completed succesfully. Not to worry, we have an article with information on how to treat this symptom:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    Best,
    Jeremy

  • Hi, since the last update i find my rented movies remained under rented although unplayable. now i find some, as before the update, are deleting fully - can anyone tell me how to delete the unwatchable covers that remain?

    hi, since the last update i find my rented movies remained under rented although unplayable. now i find some, as before the update, are deleting fully - can anyone tell me how to delete the unwatchable covers that remain?

    bunjamin wrote:
    There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
    Hi bunjamin,
    just go to BlackBerry World, and update all your apps including BBM.
    bunjamin wrote:
    Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
    you can turn off the magnifying glass :
    device settings >> accessibility >> magnify mode >> OFF
    you can deactivate the "reset to Hub view" :
    hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
    bunjamin wrote:
    my ringtone is much softer than it was previously
    yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
    KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • After the last update on Mac os 10.9.2 end of April - I

    After the last update on Mac os 10.9.2 end of April - I opened Pagemaker and my whole system crashed after talkign with Apple, I had to erase everything on my hard drive.  I finally got it fixed and re-installed pagemaker cs5 and a few other program that I HAD to have while I was on vacation.  When I got home, I tried installing CC and various programs (pagemaker, indesign, photoshop etc. Had to erase all of the other adobe programs and start from scratch.  Every time I open ANY adobe products all of my "white space" is pink and white vertical striped in EVERY program. Apple mail, contacts etc.  If I completely shut down the computer and then restart everything is fine until I open an adobe product again.  I can't seem to get any help out of Adobe, does any one have any suggestions before I cancel my subscription entirely?
    Thank you in advance,
    Janie

    You may need to ask for help in the individual program forums
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.

    Anything known on this issue? Solutions? Even importing files from memory card is a problem.
    In import window images are not diplayed as images but all the same blue mini images.
    vertical files are changed into landscape positions and more. Mac version.
    cj de vries

    Op 12 apr. 2014, om 19:27 heeft Yammer <[email protected]> het volgende geschreven:
    Re: Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.
    created by Yammer in Bridge General Discussion - View the full discussion
    http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6292450#6292450
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6292450#6292450
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6292450#6292450. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Bridge General Discussion at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
    THNX Problem solved

  • After the last update that was pushed out by Adobe, my Acrobat 9 Pro will not generate a PDF file fr

    After the last update that was pushed out by Adobe, my Acrobat 9 Pro will not generate a PDF file from; [right click], Combine files into one PDF multiple files chosen in the explorer.  A message pops up asking if I want to run repair.  Answering in the afirmative results in another message stating files are missing.  And we are back at square one.

    What is the exact error?  Else you could always reinstall your software.

  • After the last update I lost a lot of documents I had edited and saved in my tablet. Any option to recover them? Now I can only access the documents of the cloud.

    After the last update I lost a lot of documents I had edited and saved in my tablet. Any option to recover them? Now I can only access the documents of the cloud.

    Hi,
    Please take a look at one of the following documents to see if it answers your question about finding the files that are locally stored on your device.
    For iPads & iPhones
    How to manage files in Acrobat DC for iOS
    For Android devices
    How to open PDFs on Adobe Acrobat DC on Android
    Please let us know if you have additional questions.

Maybe you are looking for

  • How to use the COMM API in a JAR file

    I have developed an application, using the NetBeans IDE, to communicate with a modem over the COM1 serial port using the Java Comm API. The application works fine within the IDE, but when a JAR file is created and "double-clicked", the application la

  • Can't access a VM within oracle VM server

    dear team, This is the first time i use the OVM and we are planning to sell it to our customer but we are facing issues which prevent us to go further; here is a summary of the architecture as well as the issue: 1) the OVM 3.2.1 is installed on an In

  • Standard keyboard is acting weird!

    Just recently my keyboards been acting weird. Most annoying of the problems is when I am pressing delete and it gets to the end of the word and then inserts another word instead of deleting! At first I thought I was knocking letters around the delete

  • Sent iphone to Apple but still have not received it back

    Hi I sent my iphone 3g into Apple on tuesday but I have yet to get it back. Does it usually take this long for a repair/replacement?

  • Gray Screen of Death. HELP!!

    Powerbook G4 1.67 Screen went totally gray (no apple logo or anything else). Tried to rest PRAM, Nothing. Tried moving RAM to a different port. Nothing. Opened it up, and checked internal battery. Nothing. A friend who is pretty good with Macs, think