Before updating the software om my iPhone 5 to iOS 7, it were possible when adding new contacts to mark them with 'iPhone, fax, mobile etc.' Now it is not possible to select iPhone anymore, does anyone have a solution or know what is wrong?
Any one have a solution on my problem?
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
Similar Messages
-
Just to add that everything worked just find before i updated the app,after the update i wasnt able to locate my device
Try force closing the Find My iPhone app by double tapping the home button, locating Find My iPhone in the list at the bottom, tapping and holding it until it wiggles, tap to close it, then tap the home button again.
-
I am currently using a Iphone 4.I have been trying for countless times to restore my phone but error 16 keeps on popping up.This happened after i updated to the latest IOS.Does anyone have any solutions other than jail-breaking.I have never jailbreaked.I am deperate to restore my phone...Please help!!!!
Most likely a hardware failure, & if so, you won't be able to restore/activte your phone. If you've tried at least two times, & are still getting this error, make an appointment at any Apple store, or call AppleCare.
-
I have an iPhone 4S wi iOS 5.1 installed and I can't view the option to enqble iTunes Match under the Music menu. I have subscribed to the service and it works fine on my iPad. Does anyone have a solution to this? Can anyone enlighten me as to what's going on?
Thanks in advance!Yes, that's exactly where I was looking, and that option to turn iTunes Match on/off was non-existent, however, I don't know what happened, it just appeared and is working fine.
Thanks! -
Just did a software update, and all that my Macbook Pro does is just beep. Does anyone have any solutions?
It was a list of about five updates, but the one that stands out is the Lion OS X complete update - I think.
-
This is the error I get. I did not find this on the itunes webpage...
"itunes cannot connect to this iphone. An unknown error occured 0XE80000065." Does anyone have a solution. I am not connecting an iPhone, but an iPod. I cannot therefore sync my iPod to my iTunes.Hi prolough,
Here is a link that should help:
http://support.apple.com/kb/TS3221
Cheers,
GB -
I have an iMac running OX 10.5.8
I need a portable external hard drive to back it up before updating the software to Yosemite but I can't find anything that doesn't require you to be running at least OX 10.6. Is there a suitable hard drive? I'm not very technical and wouldn't know how to do any formatting so I want it to be very basic so that I can just plug it in. 500GB should be more than adequate.Correct. When you purchase devices, they would have stated the OS they needed to work, on the box. This can be overlooked, but it is very important to check when purchasing.
You current OS, is so old, that they technology build into the new devices, is not something your OS understands. It didn't exist when your OS was created, and therefore you need to upgrade the OS to work with the newer technology of these devices.
10.6 software is not downloadable. You must purchase a DVD disc. You can order it from the on-line apple store
- http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard. -
After updating to ios7 on my ipad,
I can't install any new apps or update any of my already installed apps. Does anyone have a solution?I had the same problem. When I downloaded iOS 7, the auto download switch in the I Tunes & Apps store turned off. Go to the I Tunes & Apps store in Settings and turn the toggle switch to on for Apps auto download.
-
Im trying to restore my Iphone 4S using Itunes but get "unknown error -1 " Does anyone have a solution?
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service. -
My IOS is 4.2.2 and my ipod doesnt accept later versions. Before updating the software, I used to have viber and now I can reinstall it, because it needs IOS 4.3 or later. Is there any place where I can get the older versions of this app? Also, there are others app that wont install, such as netflix, angry birds, etc
Please, help me! I really need it!Only if you have it on your computer or in a computer file backup
-
After performing a routine software update this week, I am having problems with both of my email accounts. I am unable to "Reply" to any emails. Does anyone have a solution to this problem?
I am having the same problem also Thought it was my network and reset everything including Apple TV but still the problem is there . I assume now it is down to iOS 8 prior to that was perfect
-
Do i need to install the iTunes in my iPhone and backup before update the software version?
do i need to install the iTunes in my iPhone and backup before update the software version?
No itunes on your computer.
-
hi there, I am trying to upload my photos from my Iphone 5s to my Iphoto on my macbook air, but they wont load. \
It says "loading" but it's not.... does anyone have a solution? Thanks in advance.There are 9 different versions of iPhoto and they run on 10 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
I just loaded Yosemite on my Mac and now adobe flash won't work in Safari 8.0.4 . Does anyone have a solution ?
If you can't install or update Flash, follow these instructions.
If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test.
For a "blocked plug-in" error, see Step 4.
For a "missing plug-in" error, start with Step 8.
Back up all data before making any changes.
Step 1
You might have to log out or restart the computer before a Flash update takes effect.
Step 2
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
Delete All Site Data and Settings
then click Delete Data. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
When visiting other websites
From that menu, select either Allow or Ask.
b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 5
In the Safari preferences window, select the Advanced tab and uncheck the box marked
Stop plug-ins to save power
Step 6
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 7
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 8
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 9
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them. -
After the upgrade to ios5, I can no longer use my iPad to make purchases on ticketmaster. Does anyone have a solution?
Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
http://roaringapps.com/apps:table
Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
When your ready for new hardware and all new software, then buy a new machine.
If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
http://www.bombich.com/get_ready_for_lion.html
Maybe you are looking for
-
I bought two new cables to load my iPod Touch 4G with. Both of them work fine the whole week but today in the morning they didnt. But weird is that they work on my brothers ipod but not on mine, can somebody help me?
-
Hello, in my organisation, FI is active but PS not yet active. Now till date we are posting all the CWIP related entries to manual CWIP account with a reference to WBS Element. WBS are already created. Now, we want to make PS live. My question is: Ca
-
** How to send 2 IDocs DEBMAS06, ADRMAS03 only if both contains data?
Hi Friends, My scenario is like below. Whenever create a new customer or change an existing customer (XD01/XD02), we distributes the IDoc DEBMAS06 & ADRMAS03 from one SAP system to other SAP system through XI. The present scenario is if DEBMAS06 IDo
-
External Instrument Plug-in Bug
Anyone else able to reproduce this bug in the External Instrument Plug-in with Logic X? 1. Create External MIDI track using External Instrument Plug-in 2. Save project & quit Logic X. 3. Reopen Project 4. Now the External MIDI track is triggering a d
-
Hi, I'm trying to make an application using MDI in CVI. I've run across a few old threads from people attempting to do the same thing. It seems that the general way of doing it is to: 1. Load the 'child' panel as a top level panel. 2. Use the Set