TS3376 the application is working good, but the location of my device has found was totally wrong. any idea?
the application is working good, but the location of my device has found was totally wrong. any idea?
That would be the issue here.
The gateway is a modem/router that is in charge of your network.
The AirPort sensed this during setup and configured itself to operate correctly and passively with an "upstream" router on the network.....so, the Airport is in Bridge Mode.
The upside is that the AirPort is configured correctly to work with your gateway. The downside.....and Catch 22....is that the Guest Network will not operate correctly when the AirPort is in Bridge Mode.
The AirPort has to be the router "in charge" in order for the Guest Network feature to work correctly.
If you want to try to break some basic networking rules, and have two devices both trying to perform routing chores on the network, that might be a workaround. But, things get complicated to set this up.....and it will produce what is known as a Double NAT error on the network......which may allows things to work OK....or....cause problems.
Double NAT errors are unpredictable. It will be one of those things where you will not know if things will work until you try. No guarantees possible.
The network will have to be completely redone if you want to try this, and you will have to set up new Static IP addresses for devices that need them.
In general, if you want to try this, the network layout must look like this:
Internet Connection > SMC Gateway > AirPort Express > Ethernet Switch > Devices.
With things set up the way that they are now......the simpler thing to do would be to use the SMC wireless for your "main" network and the AirPort Express wireless for "guests".
The downside....."guests" will be able to "see" devices on your "main" network with this type of setup.
Similar Messages
-
Thank you, Ive been struggling with a few issues since purchasing my apple products, I now know where to come for help.
-
My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work. It looks like it is working but doesn't. I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results. I updated the last 8.0.2. It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call. This is happening on both cars.
Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps! -
I just bought the new HDMI cord for the IPad, it works good but a small potion of the TOP and the BOTTOM is cut off. It doesn't seem to do it for movies(although I can't really tell. My monitor is a 23 IN' acer s series. I just installed the drivers for my monitor with no change. I think I have a CD somewhere for my monitor maybe it has some kind of program in there that can help me. I can post a picture if I need to. Thanks
No work around that I know of.
Apple Feedback http://www.apple.com/feedback/ -
Is there any official market or store or anything in Egypt to fix my iphone 4 it jumped from 5th floor and the back hous was crashed and the network sensor was not working good but the phone and the screen and the others things are ok so plz help ???
my iphone is now just coverd with case and the back house is crasedEtisalat, Mobinil and Vodafone provide warranty service in your country. You can also search Google for a 3rd party repair shop near you.
-
have a Mac Book and purchased a Bose system that uses an antenna to play music from the the laptop - it works great, but the computer times out and shuts down - Help
Check in "System Preferences">"Energy Saver" to see if you have the "Computer Sleep" bar set too low.
-
II have 2 yahoo mail accounts on my Mac. The primary account works fine but the second account loses connection. When I put in the password I get a message that it is not the correct password. The only way round it appears to be to go into Yahoo on Safari, log out then log bck in again. If I then go back into Mail and right click on the account I cn then get mail for this account without having to enter a password. The problem only started when I installed Lion, but is still the same in Mountain Lion.
Welcome to the Apple Community.
Enter the details of her second account at system preferences> mail, contacts & calendars. -
My itunes player won't play my songs. I hit play, the button switches to pause, but it doesn't play and bar doesn't move. Any ideas?
Hey, did you get any help on this? I'm having the same issue.
-
I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.
+For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
*Settings I have Enabled*
5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
Use Wide Channels is recommended for 5 GHz operation.
Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network. -
I activated an iTunes gift card, my iPod showed the amount available ($15) then after downloading 2 songs my balance was $.04. Any ideas on what happened to the rest of my funds or how I can find out where the rest of my money went?
- Have youwent to yur iTunes account looked at your puchase history for purchases thant y might have forgotton?
- Maybe you had an unpaid balance before redeeming the card.
- Contact iTunes
Apple - Support - iTunes - Contact Us -
I just recently updated the software on my ihpone 4 to the iOS 7 and now my iTunes Store does not work. All of my other apps work perfectly fine except iTunes. Whenever I open the app, the icons for music and movies and tv shows come up, but when I touch them, nothing happens. The screen is just blank. And I already tried updating again, updating iTunes on my computer, turning my iphone off and on, and resetting my ihpone, and nothing works. Can anyone help?
I searched this site for ios 7 and itunes store and found numerous others with the same problem, and several suggested solutions. One said that they had blocked all cookies and that was apparently the problem. I had done the same thing - blocked all cookies. So I set cookies back to "third parties and advertisers" and that solved the problem. Now the itunes store is working.
-
I downloaded the programs 1, 2, 3, 4 and 5 of Creative Suite CS2 and the 1st one worked, but when I tried the second CD, it wouldn't go in the same folder, it would go anywhere else in the sys. but where it should go, next to the first file, can you help?
Nobody can say anything without proper system information.
Mylenium -
I have a 1rst generation Apple TV and My Music disappear; after trying several times trying to get My Music back, I opted by resetting it back to Original settings with no avail. The video part is find, all my movies are there, but when it comes to the Music nothing shows up.
Does anybody know what could be happening here and have any suggestions how fix it ?So, when you go to Devices->AppleTVname->Music in the left panel of iTuens, you have:
1. "Sync music" checked
2. Either "All songs and playlists" or "Selected playlists" plus actual playlists selected
Correct?
And of course, in those actual playlists, there is music?
Is htis iTMS purchased music, or mp3's? -
Can anyone help please. Am getting fed up
Hey ACE_Design,
Well, after weeks of communications with Adobe (who are
absolutely useless, rude and unhelpful by the way) I fixed the bug.
Go to Add or Remove Programs and uninstall Acer eData
Security Management. Run Dreamweaver. Hey presto. It works.
The eData program is useless and annoying anyway, but I'd
recommend you make sure you're covered by some other security
software instead.
I hope this helps, and good luck!
PS - I have no idea why this works, but it does! -
I am getting for the last days a constant error msg while downloading or visiting iTune store: "network connection was lost" (sometimes also ways it was "reset" instead). But, the network is working (I can make othe rdownloads and visit to other internet sites). Any idea about the problem?
Mac server or Windows server? Have you checked her permissions/access vs another user not having the issue?
Maybe you are looking for
-
I don't want my wife's or children's contact information in my contacts during syncing...or them receiving texts that are intended or me. Can someone please tell me how they handle multiple family members settings in regard to emails, iCloud, and iT
-
Hi experts, plz go through this issue I am in SAP 4.70 Base UOM in MMR is MT Unit of Issue is KG When I try to issue 0.4 kg System populating the message "Quantity in stockkeeping unit is zero Message no. M7106 Diagnosis The system has converted th
-
A typical approach to web services is to access the host (an embedded cRIO, for example) using a client running in a browser with some JavaScript. Has anyone implemented a LabVIEW client that calls the web services on the host? How might this be do
-
I had enabled Unicode for Dev.6 with "NLS_LANG"="AMERICAN_AMERICA.UTF8" Now my reports can display Unicode fonts, but additionally this caused a mess in the old reports and the new ones. The fields are varchar2 and it seems that while displaying the
-
Failed to start applications after deployed as Windows service.
I deployed Administration server as a Windows service. Started Administration server in Windows Serivices control panel. The applications FMW Welcome Page Application (11.1.0.0.0), DMS Application (11.1.1.1.0) failed. I also installed adf-richclient-