TS3585 I have an iPad mini 1 and i am connected to the internet but when i went to youtube it tells me i have no internet. same with bbc iplayer
so i have an ipad mini (not retina display) i am fully conected to the internet. safari works fine but i loaded up youtube and it saids error while loading. also in safari prompts keep apearing saying server veritification falied. i opened BBC iplayer and started a program it tells me to check my internet conection. this is getting very anoying can anyone help.
so i have an ipad mini (not retina display) i am fully conected to the internet. safari works fine but i loaded up youtube and it saids error while loading. also in safari prompts keep apearing saying server veritification falied. i opened BBC iplayer and started a program it tells me to check my internet conection. this is getting very anoying can anyone help.
Similar Messages
-
Ipad mini 32 and can't connect to my HP Pavilion DM1 windows 8 via bluetooth
Just got a new Ipad mini 32 and can't connect to my HP Pavilion DM1 windows 8 via bluetooth. I get to the stage where you have to confirm on both systems the generated code and then it goes in error. Not supported. Any clue ?
Unless you have an iOS app that uses BT for a specific purpose, such as file transfer, BT on the iPad alone, as stated, does not support it.
-
I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks
If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured. -
i have mainstage 3 installed and works 1oo% when connected to the battery, but when connecting to the mains for charging the program crashes. sounds do not obey. is one, even very bad horrible latency.
and I need to work on music not only in time but the battery after that.
I ask for help pleaseThanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again! -
My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly. -
I just recently purchased the iPad wireless keyboard and I've followed all the steps, but everytime I type in the code to pair it, it says it cannot be paired. I've kept in close range, pushed the connect but it won't connect. What do I do?
AS Tesserax said you must
disconnect your laptop from the existing wifi network
Connect to the default Apple Networkxxxxxxxxx - that is your AEX open network
Go to the Airport Utility and set the AEX router to extend the Existing Network >> in the AirPort Tab > Wireless Tab >> Wireless Mode - choose your Linksys network and enter credentials - your AEX should now join the Linksys network
Then switch back to your original wifi network and your AEX should show in the AirPort utility as well, extending the range of your Linksys network, green light on
PS: Win XP support for WP2 authentication downright *****. Even with SP3, get ready for some "cannot connect" warnings. My Dell laptop from work would have major issues connecting to my home's AirPort WPA2. I had to downgrade to WPA at some point. -
When trying to find my ipod i get the message offfline. However I have it with me and it is connected to the internet and the find my iphone is on. Any suggestions?
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
i have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.
Try changing the channel in use in case you're getting interference.
If you have WEP enabled on the Internet Sharing it'ss worth disabling it whilst troubleshooting the connectivity issues.
mrtotes -
My iPad Air is locked (my brother change the code, so I don't know it) and is not connected to the internet, in more Find my iPhone is activate, so what i can do to find the pass code? Help me please!
In iTunes, select iTunes Store under STORE, scroll to the bottom and change the flag (bottom right) to the country where you are.
-
i dont remeber my new pass code number and my phone got disabled what do i do? i have the cord and my phone connected to the computer but i have no idea what to do?
A simple search finds:
iOS: Forgotten passcode or device disabled after entering wrong ... -
how do you purchase a ringtone? i have enabled 'ringtones' in the 'general' section of itunes preferences and i am connected to the internet but i just cant see where in the itunes store to click once i am at the song i want to turn into a ringtone. help!
You don't
You have to create a ringtones. Google will find several ways to do this.
I use Garageband.
How to create custom ringtones in GarageBand 4.1.1
You can also use itunes:
Make free iPhone ringtones in iTunes 10 -
I have a 2011 tahoe. My bluetooth functioned properly until I updated my iPhone. Now the iPhone connects to the Tahoe but when I try to call a number it does not work. Either it cals the number and has no outgoing or incoming sound or it just says it iis unable to complete the call.
I would check with the Auto dealer where the vehicle was purchased to check and see when the bluetooth software was last updated on your vehicle. With the vehicle being a 2011 and if the software has not been updated since the dropping of IOS 7 then obviously there will be software incompatibilities.
Good luck. -
A message saying "ethernet has a self assigned IP address and will not connect to the internet" comes up whenever I plug the cable in. Everyone's computers work except for mine work in the house and I have tried different cords and connecting sites.
Please helpOpen System Preferences/Network
Select the Location you use at home
You may need to click the Padlock bottom left at this point if it's locked, enter the admin password to unlock
In the left hand column drag the Ethernet connection to the top of the list and remove any you don't use
Click the Advanced button bottom right
Click the TCP/IP Tab
Set Configure IPv4 to Using DHCP
Click OK bottom right and you should see the Router IP number appear and a unique but similar one for your Mac
Click Ok then click Apply and close the Panel -
How do i fix my wifi if it connects and the bars are blue but no check sign appears next to the wifi name and does not connect to the internet???
Did you already try to reset the iPod by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data.
If this does not work, try to reset the network settings in Settings/General/Reset. After that you'll have to put in the passwords for all known networks again.
More troubleshooting can be found here:
iOS: Troubleshooting Wi-Fi networks and connections -
iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
ITunes v 9.0.3 Issue: iPod Connection
I know this is a long story, but I'll be damned if I'm not going to get the most specific help I can (as Apple seems to specialize in assuming user error for all its demonic software). I've never had issues with iTunes before (barring a "Connect to i
-
Custom field in limit order Details screen
hi all, i am trying to add cuf.field called purch. Group which is not present in limit orders details -> Basic data tab. one of the structure has the value of purchasing group so i didn't include any custom field in shopping cart items structure "CI_
-
Album sort order suddenly gone crazy iTunes
G'day people For some reason, the last couple of albums I've downloaded from the iTunes store, to my iTunes, displays those albums groups by artist instead of album. Even when I select them an manually change the sort order it makes no difference. Pr
-
Can someone open this idml file in CS4 and convert it to inx?
Hi guys, I have a client who has only CS2. I know... I know what you think... But that's beside the point. I need to convert a CS5 doc to an inx so they can open it on their end. I exported it to idml. But when I try to open it in CS4 it just crashes
-
Use of SunISResourceAdapter / SunAccessManagerResourceAdapter
Hi all, Has anyone configured SSO using Sun Access Manager's login module to get access into IdM? IdM 5.x had SunISResourceAdapter, and 6.0 has specific com.waveset.adapter.SunAccessManagerResourceAdapter, but when I try to configure a resource of th