TS3899 Device won't connect with email

My ipod touch stopped connecting with email a couple of weeks ago. I went through all the steps on the support  website. After deleting the account from the device, I tried to add it back and now all I get is a message that says "the IMAP server "apple.imap.mail.yahoo.com" is not responding". I have tried multiple times and checked all info for correctness.

Try resetting your Yahoo password. That is how I resolved your problem on my iPhone.

Similar Messages

  • TS3899 Have just uploaded iOS7 and now cannot get mail as device won't connect with server. Apple ID is ok  - any suggestions?

    Have just loaded iOS7 and now I cannot send or receive mail . Device message is : cannot open mail cannot connect with server. Any ideas?

    Had the same problem.  Deleted my account and readded it...still didn't work.  Had a call with Apple, and they couldn't figure out why the Exchange server wouldn't work.  They had me set up mail through Gmail, and that finally worked.  There must be a bug they need to fix for the Exchange Server. 

  • "another device is using the same ip address.." - iOS devices won't connect to AEBS wifi.

    I've got a Motorola modem/gateway - 3360 from WalMart.  I have the AEBS working in bridge mode connecting my iMac & Printer fine, but my iOS devices won't connect. 
    While troubleshooting & trying all types of settings, I was able to get EITHER the iMac or the iOS devices connected to internet, but not both at same time.
    Then I noticed I am getting "another device is using the same ip address.." message.
    I have changed the AEBS ip address & had been able to get either the iMac or iOS devices working depending on which ip address I use. 
    BUT now, all my iOS devices dont connect to the internet regardless of the ip address of the AEBS.
    All my iOS devices see the network, and accept the network password, but they do not connect to internet, circle just keeps spinning...
    Any assistance is GREATLY appreciated.
    Thanks for any assistance,
    Dave

    It looks like may have to go back to square one and delete my network & set it up from scratch if I don't figure it out.
    If you do go this route, I would like to make a suggestion for your consideration, and that is to assign static IP addresses to devices that are "permanent" on your network or ones you want to make sure can be reachable at all times. These (again) would be servers, routers, wireless access points, network printers/scanners, NAS devices, etc.
    I would recommend the following IP addressing scheme as a baseline and you are certainly free to deviate in any way you see fit to meet your networking requirements:
    Reduce the number of IP handed out by DHCP. By default, most routers will provide 100-200 private IP addresses within their DHCP leasing scope. The AirPort, by default, assigns 10.0.1.2 thru 10.0.1.200 via DHCP. Your Motorola may assign 192.168.0.2 thru 192.168.0.150. Either way, I would reduce this to no more than fifty (50) total which should provide you with plenty of addresses even if you are hosting gaming convention at your home.
    I use the following IP address scheme for the "permanent" network clients:
    Network Printers: 10.0.1.200 - 209
    NAS Devices: 10.0.1.210 - 219
    Wireless Access Points or routers reconfigured as bridges: 10.0.1.220 - 229
    Servers: 10.0.1.230 - 239
    With the "permanent" devices pre-assigned with static Private IP address that are outside of the DHCP range, you shouldn't ever get an IP address conflict again.

  • My iPhone won't connect with my computer or charge. How can I fix this?

    My iPhone won't connect with my computer. It also will not charge. I changed the white charging cord, but I have the same problem. I connected other devices to the USB and they work. It's strictly the iPhone.
    How can I correct this?

    I forgot to mention, the iPhone does charge via wall plug.

  • Devices won't connect to password protected WiFi

    As MANY others apple devices won't connect to my WiFi, but only when it is locked by a password.....
    I have tried everything I've seen on here & I am beyond fed-up.
    I have a 5c, but when others have visited with their iphone or ipad it also does not work.
    Before the update it said 'unable to connect to network,' now it says 'incorrect password.'
    This all began months ago when I replaced my router with COX. My laptop works completely fine...
    My iphone will connect, but only when the network is NOT password protected. I live in a condo, so
    it isn't an option for me to leave it unlocked.
    Please help I will try anything! Also I am not a 'techy' so if you ask me something complicated
    I may need some guidance.
    Thanks

    As MANY others apple devices won't connect to my WiFi, but only when it is locked by a password.....
    I have tried everything I've seen on here & I am beyond fed-up.
    I have a 5c, but when others have visited with their iphone or ipad it also does not work.
    Before the update it said 'unable to connect to network,' now it says 'incorrect password.'
    This all began months ago when I replaced my router with COX. My laptop works completely fine...
    My iphone will connect, but only when the network is NOT password protected. I live in a condo, so
    it isn't an option for me to leave it unlocked.
    Please help I will try anything! Also I am not a 'techy' so if you ask me something complicated
    I may need some guidance.
    Thanks

  • Is there a limit as to how many devices you can connect with Edge Inspect?

    Is there a limit as to how many mobile devices you can connect with Edge Inspect? 
    Also, do we need a dedicated wi fi hub for all these devices? Are there any wi fi limitations with connecting more than 20 devices and connecting to wi-fi?
    Thanks

    The free version of Edge Inspect limits you to connecting to one device concurrently. (You can certainly disconnect from that one and connect to another if you wish, but it's just one at a time.)
    If you purchase an Edge Inspect subscription, or have a paid Creative Cloud membership, then you can connect an unlimited number of devices concurrently. (Note that I have seen up to 35 connected at once.)
    For info on purchasing options, see this blog post: http://blogs.adobe.com/edgeinspect/2012/10/23/how-to-purchase-edge-inspect/
    It does not have to be a decicated wifi router, although it certainly can if that makes sense for you. For example, at my home I have a single wifi router that I always use for my laptops and video streaming devices, with my desktop computer connected to the same router on Ethernet, and I can connect my 5 tablets and 2 mobile phones to Edge Inspect on the same router with no issues.
    My router says it can support up to 250 connections at once (Ethernet + wifi); however, I have nowhere near that many devices so I could not put that to the test. I think a more reasonable limit is around 30; however, that is just based on having to share bandwidth. You might want to check what your router says is its limit.
    Just keep in mind that the more devices you have downloading data, the slower the performance will be.

  • Tried to update to newest version. I got error because i didn't have this recovery program disc that was supposed to come with the purchase but it didn't and now my ipod touch 8gb won't connect with itunes and is stuck on a connection with itunes screen

    I tried to update to newest version via pc. I got error because i didn't have this recovery program disc that was supposed to come with the purchase so it says, but it didn't and now my ipod touch 8gb won't connect with itunes anymore and is stuck on a screen displaying an itunes icon with a usb icon.

    oke i'm not done with the whole thing, but i'm doing that right now. Most of the advice I've already read didn't work and at a certain point it said something about shutting down programs then restart. but i notice that there are some pretty important system things in that list and i don't want to mess up my pc :s i'm not a pc genius... and because i'm dutch and my pc-language is in dutch I often have trouble translating and well... i don't always understand the technical stuff in all the articles -_-

  • After lion 10.7.3 update messed my mac had to restore from time machine now Outlook won't connect with microsoft exchange, any idea?

    after lion 10.7.3 update messed my mac had to restore from time machine now Outlook won't connect with microsoft exchange, any idea?

    I've had a similar problem.  On my first boot up after installing 10.7.4,  Firefox would not open.  Crashed every time.  Safari was not affected.  I have no idea if it was related to the flash plugin, but I did install a the latest version of that a couple of weeks ago. 
    Here's what fixed it: a second boot up.

  • Deskjet Advantage 3540 (Envy 4500): Computer won't connect with printer during software installation

    I just bought this printer and I am trying to install it by using the HP installation CD but I am running into difficulties to complete the process. The problem is that the computer won't connect with the printer (but my printer connects fine with my Wi-Fi network) and installation does not complete.
    The HP software installation process appears to go  normally (at least no error messages are shown) but when it gets to the part where it asks me how I would like to connect to the printer (Wireless or USB cable) I get an error message when I select Wireless Mode. My printer appears listed but as soon as I select it, a dialog is shown stating that "network installation could not be performed".
    Below are the dialogs and what happens (text is in portuguese but you get the idea)
    Dialog 1: selecting wireless connection mode
    Dialog 2: printer appears in list and I select it
    Dialog 3: Error message is shown, no further details
    Here are some more facts:
    (1) Printer connect fines with my Wi-Fi network: the connection details are correctly shown in its display (Wi-Fi SSID and IP 192.168.0.6) ;
    (2) If I go to a web browser in my computer and type in the IP address, I can access the printer's webpage fine;
    (3) I've tried uninstalling and reinstalling HP software;
    (4) I've resetted my router;
    (5) I've executed "HP Print and Scan Doctor" utility and it states my software hasn't been installed (which I don't understand) and it tries to download HP software and install one more time and I get to the error.
    (6) If I go to "Start" menu, I can see the HP group is empty (installation only creates icons on my desktop). See picture below:
    My OS is Windows 7 64 bit Ultimate (Service Pack 1)
    EDIT: I've just discovered the inkjet Advantage 3540 and Envy 4500 appear to be the same printer, each target to a different market.
    Help is much appreciated as I tried a lot of things to make this printer work wirelessly with my computer but without success.
    Thank you,
    Joao Pedro

    Hi JoaoPedro,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    Sorry to hear that you are having installation issues.
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Thank you for your time
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I just installed Airport Extreme. It works as a wireless network on my Macbook. It won't connect with my Windows Visa PC. Message reads: "settings saved on this computer for the network don't match requirements of the network.

    I just installed Airport Extreme. It works as a wireless network on my Macbook. It won't connect with my Windows Visa PC. Message reads: "settings saved on this computer for the network don't match requirements of the network." I seem to need to enter a security key/passphrase to connect to the PC. Where do I find them?
    Thanks for your help.

    I assume that you have Wireless Security enabled on your AirPort's wireless network. The issue maybe that the PC is unable to use the WPA password itself and will require using the Equivalent Network Password instead.
    To get this password, you will use the AirPort Utility from the MacBook:
    Start the AirPort Utility > Select the AirPort base station > Manual Setup
    Now, before doing anything else, go up to the utility's menu bar at the top of the screen, and then, choose "Base Station," and then, Equivalent Network Password from the drop-down menu. You will see two items: 1) WPA Password, which should look familiar to you, and 2) WPA Pre-Shared Key. It should be a long hexidecimal set of numbers and letters. Jot down this second item.
    You will want to use the value you just jotted down when entering the password from the Windows Visa PC.

  • Microsoft Exchange won't connect with my iPhone (it's saying the password is incorrect, but it shouldn't be), now I can't delete that inbox on the phone.  Help??

    Microsoft Exchange won't connect with my iPhone (it's saying the password is incorrect, but it shouldn't be), now I can't delete that inbox on the phone.  Help??

    Turn off wifi.  Use wireless signal. reenter password at settings.  This should work.  Turn wifi back on if you wish.  Wait for next occurrence within hours or days.  Have not found a permanent preventive solution.  Thinking of replacing my four year old wireless router.

  • WRT160N Won't Connect With Windows Mobile Device

    I had another wireless router for years that connected almost instantly to my Windows Mobile 6.1 handheld device.  I switched to the WRT160N and it works great with my wireless laptops.  The device does not even show up in my available device lists on my Windows Mobile phone with wi-fi.  I tried manually connecting and it does not work.  I tried all of the other security settings, it does not work. The phone manufacturer (not the sevice provider which is Verizon) has acknowledged that they are having calls only about Cisco branded routers.  Does anyone have a solution?

    I had exactly the same problem. Tried the live technical support chat but didn't solve the problem. Resorted to random changing of settings and discovered if I changed the router setting Wireless -> Basic Wireless Settings - Network mode from 'Mixed' to 'BG-Mixed' my Windows Mobile 6.1 device found the network and happily connects with WPA2

  • Tablet won't connect with static LAN IP address

    Today I updated my Xperia tablet (model SGP311) to Android 4.4.2 (kernel version 3.4.0-perf-g32ce454).
    My tablet no longer connects to my home wi-fi network if I assign it a static LAN IP address. It connects fine if I use DHCP. But I prefer to assign my devices static IP addresses when possible.
    I have tried forgetting and re-connecting to my LAN several times without success. The static IP address worked fine until today's update.
    Any ideas?

    sunnhausl wrote:
    I tried that already, too! New development...I have the same problem in my office now. So, clearly, it is a problem with my iTouch. It recognizes the networks, won't connect, and when I go into look at the network, there is not data (IP address, etc.) It's just blank. HELP!
    You could try restoring the S/W on your iPod Touch. If that doesn't work you may need to talk to Apple about repair.

  • Desktop won't connect with Blackberry

    I'm using Vista Home Premimum and I have uninstalled ActiveSync. I have installed vesion 4.5 (4.3 won't work. It starts and then a second later shuts down.) When I connect the blackberry to the USB port, the desktop doesn't connect with it. The computer recognizes the blackberry and device manager shows that it is working properly, but the desktop won't connect.

    Although the following thread had XP as the operating system, I believe this might be a good way to isolate your problems. It resolved the problem for them. Please note StoneRivers post.
    http://supportforums.blackberry.com/rim/board/message?board.id=8300&thread.id=2238
    Hope this helps!
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Some devices won't connect to wifi network after resetting network settings to default

    Hi all,
    I had to restore to the default settings on my 4th generation Time Capsule today and now half of our devices will not connect to the wifi network.  The macbook pro (mid 2010 OS 10.9.4) that I used to reset the time capsule with and my iPhone 6 (8.0.2) both can connect just fine.  However, our household's two iPad Airs (8.0.2), an iPhone 4s (iOS 7) and a Macbook (late 2009 OS 10.6.8) all can't connect to the internet.  The macbook connects to the network, but an exclamation point appears over the wifi symbol.  The two iPads and the 4s won't even connect to the network.  I initially named the network the same as before with the same password, but then changed it thinking that might be the issue, to no avail.  I've restarted the Time Capsule and all the devices that can't connect.  I've also made them forget the network and try to rejoin.  The router is connecting with DHCP, it is in bridge mode while connected to a cable modem, and the wireless security is set to WPA/WPA2 Personal.
    I'm at my wit's end.  Any help would be greatly appreciated.

    If your cable modem is a pure modem the TC must be in router mode.. ie DHCP and NAT.
    It is easy to find out.. check the IP you get on the WAN of the TC in airport utility.
    Your limit is because only one or two public IP are available.
    If that is the not the problem please give more info.
    What modem do you have??
    And give some screenshots of the setup .. summary page from the TC and network and Internet tabs.

Maybe you are looking for