TS3999 icalendar does not work on my PC, it continues to get an error message.  It worked before and now it does not anymore

Icalendar no longer works on the PC that I am using.  It did in the past and now it does not.  Coincidentally, this happened after my iphone was stolen and it was replaced with the iphone 5s.  Does it have to do with my settings?

Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

Similar Messages

  • Getting an Error Message: AA 698  ANLB and ANLC for asset not in Sync

    Hi all Experts
    I know there were previous thread on the similar issue. I read those and tried to follow the procedure mentioned but didn't work. First of all We are working on ECC 6.0 verion. We have couple of assets Which is giving a problem even when we display the asset. The error message AA 698 ANLB and ANLC for asset not in Sync.
    We added a new depreciation area which was added to all the assets. the depreciation calculation for the new depreciation area is not updated in table ANLB. The asset were capitalized in 2009. I think the asset transfer was done using AS91. I initially thought it was fiscal year change problem but now as i open fiscal year 2009 and try to calculate the depreciation it keeps giving me the same error AA 698. There were various OSS notes mentioned which are all implementd in our system.
    One more thing I see is that on the depreciation area which has issue which is not populated in ANLB table doesnot have ordinary depreciation  start date. Which I tried to maintain using AS92 and reran the depreciation caluclation (AFAR) this also didn't work as its giving me the same error. Also this depreciation area doesn't have Operational rediness date, I think this date should populate from the value date of the asset.
    Please let me know if you have suggestion
    Thanks
    Rajan

    Hi bernhard,
    thanks for your reply. Below are my observation
    1) Have ANLB-LGJAN and ANLC-GJAHR the same depreciaiton areas:
              I had checked this earlier....ANLC doesnot have an entry for that specific deprectiation area. ANLB has an entry. This is where all the issue started.
    2) Is the field T082AVIEWB-AUTHORITY on 2 (note 900767).
             This note has been applied and the view is on 2
    3)Are the following fields synchrone: ANLC-GJAHR = T093C-LGJAHR
                  These field are not synchrone: ANLC doesn't have an entry for depreciation area 82 other depreciation area are at 2009 in ANLC and in T093C-LGJAHR is in 2010. How can we sysnc these tables? Also how can I get depreciation area into ANLC table?
    Thanks
    RDK007

  • I have lost the ability to upload files to a website. I have to transfer files from my computer to a web site and I get an error message "connection was reset" and the file will not upload. I try to transfer pictures and I get the same message.

    I have to upload a scanned receipt to a website and I get the error message "connection was reset". I have uploaded these receipt for two years and last week I have had to use another browser to complete this operation. I connect to the website and do the report I must do, but I can no longer upload to this site.

    Are you using any additional software for the uploading?
    Try using Firefox in [[safe mode]] when you upload. There is no need to make changes when you see the option. Disable all plugins whilst in safe mode. Then try the uploads.
    You mention [/questions/921993 elsethread] that it is a work site. Have you contacted your IT department. One possibility is that the site is not recognising Firefox 10.
    (One temporary workaround and troubleshhooting test would be to install Firefox3.6.27 [http://portableapps.com/news/2012-02-01_-_firefox_portable_3.6.26_released portable] as an additional browser and try that.)

  • Since moving to iCloud, my mobileme email works ONLY on my iPhone, but not on my PC with Outlook.  I get an error message indicating the authentication is not accepted.  any suggestions?

    since moving to iCloud, my mobileme email works ONLY on my iPhone, but not on my PC with Outlook.  I get an error message indicating the authentication is not accepted.

    To anyone who has viewed this post and is having similar difficulties, the answer came on a different forum: I dragged & dropped the files from Mail to iCloud Drive. Opened them on my MB Air, they were saved in Templates and are now accessible across all my devices.
    Answer came from SGIll: Numbers templateshttps://discussions.apple.com/message/27505880#27505880Numbers templates

  • I want to add Narration to my movies. I've watched the Elements Guided Help for Narration. But when I click the RECORD Tab, I get an error message. "Your current audio hardware selection does not have any inout channels." My question, therefore: Do I need

    I want to add Narration to my movies. I've watched the Elements Guided Help for Narration, and closely followed their procedure. But when I click the RECORD tab, I get an error message. "Your current audio hardware selection dos not have any input channels." My question, therefore: Do I need to buy an external microphone? I have an HP Pavilion Laptop, running WIndows 8.1. I thought I had a built-in microphone. But ,maybe not. Please help. Also, WHAT KIND of microphone - exactly - should I buy? Thanks for your help.
    Mike Moore
    Corvallis, Oregon

    mikem
    Go to Edit Menu/Preferences/Audio Hardware and ASIO tab and click on it.
    Under the Input tab, make sure that you have your microphone selected.
    Please let us know the outcome.
    Thank you.
    ATR

  • After my successful download of iTunes 64 bit,I continue to get an error message that it's missing Apple Application Support. What am I doing wrong?

    After my successful download of iTunes 64 bit,I continue to get an error message that it's missing Apple Application Support. What am I doing wrong? I've installed it and uninstalled it several times already, but each time I get that error message...

    I've been getting timed out for 2 days now, what finally worked for me was not plugging the phone into the computer and just doing the update through my wifi, worked perfectly, took less than 15 minutes

  • I get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)

    i get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)

    The thing is, that error message has been appearing when playing/recording a track that was running perfectly a few minutes ago and nothing has changed!
    That can mean, that your project is too ambitious for your Mac. Are you using many complicated automations on that track?
    4GB memory is not much, when doing audio processing. GarageBand will need all memory it can get, or will be forced to continually swap pages to your disk, to free RAM, and that can cause this error.
    When this error occurs, it is best to restart the computer. This will free your RAM. Close all other applications that are competing for memory, i.e. other multimedia applications, and Safari.
    Also, make sure, that you have plenty of free disk space. Don't let the free disk space drop below 20G.
    Where is your project located? On an external drive or your internal drive? If it is on an external drive, connect this drive directly, not daisy-chained, or move the project to your internal drive.
    I got up to eat, came back and tried to continue but GarageBand shuts down and displays that message every time I try to run the song. I've also recently run songs with several more tracks than this one and they worked perfectly. Any tips?
    Are your other projects, that worked perfectly, still working?

  • I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

    I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
    Help!
    Thanks, Mark

    Unfortunately, the error message gives no details about what codec might be missing or what it needs.
    If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
    It's a stupid error message. Apple should do better than that.
    Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
    I'll call Apple support when I get a chance.
    Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

  • HT1926 I am trying to update my iTunes so I can sync my new iphone 5s and it doesn't recognize the phone, apple support said I need to update my iTunes when I try and do that I get an error message that says " the ITunes update server could not be contact

    I am trying to update my iTunes so I can sync my new iphone 5s and it doesn't recognize the phone, apple support said I need to update my iTunes when I try and do that I get an error message that says " the ITunes update server could not be contacted. Please check your internet connection or try back later.
    My internet works fine and I have tried back dozens of times with same result.

    Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
    Thanks!

  • When i try to copy books to my nook, with every single title i continue to get an error message that says 'copy not allowed - no permission to copy the book'. any suggestions on how to fix this?

    when i try to copy books to my nook, with every single title i continue to get an error message that says 'copy not allowed - no permission to copy the book'. any suggestions on how to fix this?

    I had recently updated from Windows 7 to Windows 8.1 and thus had to re download Adobe Digital Editions. I downloaded Version 4.0 but the problem seemed to be with the authorization between the e-reader and the computer. While in ADE click the help button and click erase authorization then re do your user id and password. It worked for me.

  • I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (.m4v). I have not touched the file in any way (no trimming, clipping or other editing)

    I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (e.g. .m4v). I have not touched the file in any way (no trimming, clipping or other editing), all I want QuickTime to do is export the file in a compressed format. Bizzarely, if I shutdown and open QuickTime many times I can occasionally export a clip as another format (maybe one in 10 times). I have seen that other users have had a similar problem after clipping files in QuickTime but this seems to be a slightly different bug in that all I do is open the file and then try and export the file as is - either way, this is a very annoying bug

    @Z_B-B, thank you for taking the time to respond to my cry for help. However, the link you supplied does not address the problem: I am not trying to export from Final Cut Pro to QuickTime, I am trying to export from QuickTime to the rest of the world (like people's iPhones and Ipads) in .m4v format (so I am not emailing my freinds such huge files).
    If I were to spend hundreds of Dollars on a copy of Final Pro I could export directly from there and not have to bother with QuickTime, but I do not take enough video clips to justify the cost. I must say that I never had any of these problems before I decided to switch from Snow Leopard to Mountai Lion.

  • My Mac is already authorized by iTunes but I continue to get an error message saying it is not.

    My new Mac has been authorized to play my iTunes music, but I continue to get an error message for two songs that were purchased. The error message asks me do I want to authorize my computer, but when I go through the authorization process I get a message that it is already authorized, click OK, and I immediately get a message this computer is not authorized. Any ideas?

    Hey jbarrett
    I've had this problem before but on a Windows machine. I'm hoping this will still work with your Mac.
    Try trashing the SC Info folder which seems to help iTunes play the songs again.
    You'll need to deauthorize > remove the folder > authorize

  • For the 1st time I am trying to send an iPhoto by email but get an error message "combinations of username and password not recognised" I use the same details to log on to my Sky Mail (yahoo mail ) account . Any ideas?

    For the 1st time I am trying to send an iphoto by e-mail but get the error message " combination of username and password not recognised  by the server" I use Sky Mail ( yahoo mail) and input the same username and password that I access Sky Mail - have retried many times. Predictably the Sky help desk have no idea. Can anyone help please?

    I regret that you're having trouble setting up your email, corbad! You're on the right track with your incoming email address. You might also try incoming.verizon.net or incoming.yahoo.verizon.net as possible alternatives, and 995 as the port number. Please let me know how that goes!
    DionM_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • HT204053 I am running Windows 7 and have tried to install iCloud.  No matter what instructions I follow, I still get the error message "This Apple ID is valed but is not an iCloud account."  How can I resolved this?

    I am running Windows 7 and have tried to install iCloud.  No matter what instructions I follow, I still get the error message "This Apple ID is valed but is not an iCloud account."  How can I resolved this?

    I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
    So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
    Thank you for any help you can give.
    Trish

  • I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
    (When you replaced the Hardisk, you should also replace the battery.)
    Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
    You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
    Have a nice day!

Maybe you are looking for