TS4185 Just downloaded FACETIME on my 4yr. olf Imac running Snow Leopard. When making a call to my friend's Imac all works correctly going both ways. When my wife calls me via Facetime from her Ipad, I cannot click on "accept"- not there?

Just downloaded FACETIME on my 4yr. olf Imac running Snow Leopard. When making a call to my friend's Imac all works correctly going both ways. When my wife calls me via Facetime from her Ipad, I cannot click on "accept"- not there? When called by the Imac (newest), the "accept" or "reject" radio button appears for me to click and connect. On my wife's Ipad the two radio buttons always appear when a call actiivates Facetime and comes on?
There is nothing I can find in "Preferences" in Facetime to turn that on or off. I suspect it has to do with having a more current operating system; that the "controls" are in the operating system? [I'm guessing] It's frustrating getting Facebook calls from several friends on Ipads! Any ideas...VFP

I suspect it has to do with not having a more current operating system
Exactly, what Apple is doing is leveraging new features only on newer OS X versions to force you to upgrade OS X to 10.7 or later.
What they don't tell you is 10.7 or later will NOT run your PowerPC based software, some of it you can't get Intel versions like for perfectly working printers, scanners and games etc. So it can be a very expensive OS X upgrade to 10.7 or later with third party software.
http://roaringapps.com/apps:table
Also they don't tell you is the risk in bricking your machine if the update goes badly, so you have to have AppleCare in case that occurs so it's on them to fix it. Else your paying money to replace the logicboard or buying a new machine prematurely.
A four year old machine can't have AppleCare, it's only good for 3 years from date of purchase new.
Your machine came with a boot hard drive, it's usually got about 4-5 years of life on it, then it needs to be replaced.
Also they don't tell you the newer OS X version has more abilities and features that causes your machine to slow down in performance, especially on older machines.
Also they implement new, idotic and extremely fustrating new user interface features in a arbitrary "you take it or leave it" manner with little or no fall back method.
So upgrading OS X is a gamble on older machines that otherwise would likely work perfectly fine for the next 5 years if one didn't need to have to mess with it.
Since Snow Leopard has slightly over 25% OS X version market share, your still good for security updates etc for the next few years if you just want to stay where your at and be happy.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
The Lions are, well, not so welcome due to Scott Forstall retard UI issues, OS X Mavericks 10.9 is likely going to fix things a bit better.
But basically what is occuring is Apple is trying to force a faster hardware upgrade cycle with the more expensive products by leveraging features on the smaller devices that expire sooner.
Apple is a hardware company that leverages whatever it can to get you to buy more hardware, it's why they are as rich as they are.

Similar Messages

  • My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive.  Can't get it to run Hardware Test.  Disk Utility says disk OK - files are there. What can I do?

    My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard.   I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host.  But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning.  I can't get it to run Hardware Test - just get the white screen.  If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

    Hi-NRG Bwoy wrote:
    I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
    Reet the SMC and the PRAM
     Cheat sheet to help diagnose and fix your Mac
    Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
    clean the disk.
    If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    How to erase and install Snow Leopard 10.6

  • HT204408 Purchased FaceTime ver 1.0.4 for iMac running Snow Leopard. Now can't activate.

    Purchased FaceTime ver 1.0.4 for iMac running Snow Leopard. Now can't activate.
    Get the message "Could not sign in. Please check your network connection and try again"
    On Apple Support page titled: FaceTime, Game Center, Messages: Toubleshooting sign in issues
    all items in Resolution list are OK, e.g., have an active Internet connection, have a valid Apple ID and verified, etc.

    Thank you for the reply.
    As my father-in-law's MacBook (10.6.8) with FaceTime 1.0.4 is not at hand now, I can not check it for myself right away. 
    But my understanding is :
    (1) FaceTime 1.0.5 update is free for download for the OSX 10.6 users who have already purchased and installed FaceTime 1.0.4 or earlier.
    (2) The OSX 10.6 users who want to start using FaceTime from now, need to purchase the 1.0.5 for $0.99 (just as other OSX 10.6 users did before).
    The latter (2) is because OSX 10.6 does not include FaceTime which was not ready at the time of its release. Due to some accounting regulation, Apple chose to sell the FaceTime to OSX 10.6 users at the mimimum price rather than to add the function afterward for free.
    That means every OSX 10.6 user who wants to use FaceTime has to pay $0.99 at some point of time, but I believe Apple is not so greedy to charge the same software twice to fix its bug.
    I guess the screen shot you posted might be taken either by a non-OSX 10.6 Mac, or by OSX 10.6 Mac without FaceTime installed. If you see the same page by a OSX 10.6 Mac with FaceTime alreay installed, it will look diffrently.
    Anyway, I may be wrong, but I will check it with my father-in-laws' MacBook hopefully this afternoon.

  • I used Target mode to transfer files to a new iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and po

    IS THE SITUATION HOPELESS
    I used Target mode to transfer files to a new i7  iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
              Please tell me how to get this disc to eject !

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • Keyboard viewer on my iMac (running Snow Leopard) recently has lost small size. Green " " button is just moving big keyboard size up. I would appreciate  a hint how to fix it. Alex

    Keyboard viewer on my iMac (running Snow Leopard) recently has lost small size. Green "+" button is just moving big keyboard size up. I would appreciate  a hint how to fix the problem. Alex

    You can resize the keyboard window, positioning the mouse pointer at the edge of the window, clicking and dragging to the desired size.

  • Does anyone know if I can download photoshop cc on my imac - running Snow Leopard 10.6.8 ? will it all work?

    Does anyone know if I can download photoshop cc on my imac - running Snow Leopard 10.6.8 ? will it all work?

    10.7.x or newer is the system requirement for CC:
    http://helpx.adobe.com/photoshop/system-requirements.html

  • Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8.  After updates no wireless capability for ipad or laptop, imac connects fine but nothing else.No widgets work.

    Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8.  After updates no wireless capability for ipad or laptop, imac connects fine but nothing else. No dashboard widgets work, Skype won't work. What goes?

    Your post is pretty lengthy and I have to admit I didn't read it all. Please try restarting in Safe Mode, if that doesn't work please do both a SMC and PRAM reset. These may take 2-3 attempts.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • I just installed Mountain Lion on my iMac that was previously running Snow Leopard. Bugt I found that some key applications no longer work, so I would like to go back to snow Leopard. I can't use time machine backups for this. what can I do?

    I just installed Mountain Lion on my iMac. But In was dismayed to find that my Canon scanner software (Canoscan LIDE500F)no longer works. Nor do any of my MS offce applications. I tried to use time machine to reinstall Snow Leopard (my previous operating system), but unfortunately my time machine backups did not include system software. Also, the original system install disk that came with my iMac would not allow me to install Snow Leopard in place of Mountain Lion. I would appreciate it if somebody could tell me how to solve this problem.

    The reason your Office doesn't work is because it is PowerPC code. If you will upgrade the 2004 Office to 2011 Office then that will work.
    I don't understand how you managed to get your Time Machine backup to not backup the system.
    Now if you still what to downgrade you will have to erase the disk and reinstall Snow Leopard. Most likely all of your application and then restore your data from Time Machine.
    To me it sounds like it would be easier to upgrade your software and stay with Mountain Lion instead.
    Allan

  • I have an iMac running snow leopard. I have trouble with my internal speakers, I cannot adjust the volume without having an earphone plugged into the jack.

    The volume only works when I have earphones plugged into the jack, otherwise when I try to adjust the volume it has a circle with a cross. Ive tried restarting it with and without the headphones plugged in. However it does make that mac sound when turning on the machine before the apple logo comes on and takes me to the desktop screen. Is there anything I can do to fix this??

    I'm having a very similar problem.
    I've got a 2010 iMac that I've got hooked up to my Pioneer Elite via HDMI cable using the Moshi adapter.
    It's been working great for months, but today the audio began dropping out -- a fraction of a second, every six seconds or so.
    I installed the latest Snow Leopard update today. Does anyone think there might be a connection?
    thx!

  • I can't receive mail from my verizon/yahoo account on my imac running snow leopard.  I checked all settings with verizon but still have the problem

    My mail application on my imac will not download mail from my verizon/yahoo account.  I contacted verizon and confirmed my settings to be correct.  I don't get any error messages, I can send mail but I can't retrieve it from V/Y.  Connection doctor shows all connections with a green light.

    Mail/Preferences/Accounts
    Incoming Mail Server:  imap.verzon.net
    Outgoing Mail Server(SMTP):  smtp.verizon.net:your email [email protected]
    If that does not work, call Verizon for instructions.

  • Cannot install Windows 7 on my iMac running Snow Leopard

    When I run Boot Camp Assistant to partition the HDD it says it wants to install some Windows drivers first.  When I say OK it starts and then reports that it can't find the drivers.  I have to force quit Boot Camp Assistant to regain control of the iMac.

    disconnect all usb devices (except your kb and mouse and usb drive being used by boot camp)
    use only a usb2 drive
    if your imac has a dvd drive, you have to use that for the windows installer, usb will not work

  • Who can give the right information to receive my email via iCloud on a iMac with Snow Leopard? It can't be upgraded to Lion.

    I still have problems since migrating to iCloud with receiving email through my Mail app on my iMac running Snow Leopard 10.6.8 (and it can't be upgraded to Lion). Like I found on different places on internet, in Mail Preferences I made a new account, once with imap.mail.me.com and once with p02-imap.mail.me.com, like differently advised. Sometimes it works, sometimes not, untill I fill in again and again the advised changes in the Preferences.
    Is there a good advise arround to have my settings once and for all running well, as I expect from Apple stuff? Is Apple listening to the many complaints on this iCloud matter, or is my Apple Micro becoming too Soft to be heard?
    Thank you beforehand for helping me (and many others). Best regards,
    Jerome from Belgium

    Dear Roger and all interested,
    Right you are with stating you can't have MobileMe and iCloud at the same time. To explain the history of my problem:
    I have a small network of 3 computers: 1) MacBook Air 1.6 GHz Intel Core 2 Duo - 2) iMac 2.66 GHz Intel Core i5 - 3) iMac 2 GHz Intel Core Duo
    For the first time hesitating to upgrade as soon as a new system is available, a friend nevertheless could convince me of the usefullness of Lion and iCloud. During upgrading process I found out that my - 3) iMac just was narrowly to "old" for Lion.
    And indeed the migration from MobileMe to iCloud went almost automatically. But quite soon I established that my "old" iMac was no more receiving @mac.com mail. Having a look to the preferences of Mail, I couldn't change anything as I had no more MobileMe access, being migrated to iCloud. Apple information told me to select "Mail, Contacts & Calendars" in the System Preferences, but Snow Leopard has no such thing.
    Search on internet told me more or less how to set up an IMAP account in Snow Leopard in Mail preferences with as server address "imap.mail.me.com" with SSL on and use of port 993. This shortly worked. After restart no more. Setting up the account again and again, sometimes working, sometimes not. This is not exactly an almost automatically migration. Some other information told me to use "p02-imap.mail.me.com".
    Current situation: after start up, a window from Mail asks me to give my password for the account on the MobileMe IMAP-server "mail.me.com" (which I expected to be "p02-imap.mail.me.com"). Password not accepted, retry and retry, then just click on Cancel. Result: iCloud account has a kind of lightning symbol next to it (= not working). I click on the symbol, one time it disappears and the account works, one time it asks for the password again, and again not accepted. Repeating this procedure untill it works. So for 3 days I realized to make it finally working up to now, but all this does not look to be the right way and doesn't sound a too reassuring situation to me.
    When I look at Mail preferences in Snow Leopard now:
    Account Type: MobileMe IMAP
    Incoming Mail Server: mail.me.com (expected here p02-imap.mail.me.com)
    Outgoing Mail Server (SMTP): p02-imap.mail.me.com
    (Advanced) Authentication: Apple Token
    What I find in preferences (automatically established) on my Lion computers:
    Account Type: iCloud IMAP
    Incoming Mail Server: p99-imap.mail.me.com (shows grey)
    Outgoing Mail Server (SMTP): smtp.me.com
    (Advanced) Authentication: Password (no Apple Token option)
    So I tried to make Snow Leopard Mail similar based on the Lion preferences:
    Account Type: MobileMe IMAP (found no way to change to iCloud IMAP)
    Incoming Mail Server: mail.me.com (shows grey, found no way to change to "p99-imap.mail.me.com")
    Outgoing Mail Server (SMTP): smtp.me.com
    (Advanced) Authentication: Password (no Apple Token option)
    Same result as before: asks for password, which I have to cancel, then click away the lightning symbol, after which it works (but perhaps not tomorrow).
    Best regards,
    Jerome from Belgium

  • HT4557 Just got Apple TV.   Quickly set it up to view photos on by iPad on the tv.   Now I can't figure out how to view my wife's photos from her iPad.  How do I do this?

    I just set up Apple TV.  Quickly started watching my photos on my iPad on the tv.    Now I am trying to figure out how to watch my wife's pictures from her iPad  on the TV, no luck so far.  Any help out there?   Thank you

    Read the manual. http://support.apple.com/manuals/#appletv
     Cheers, Tom

  • Hi to All, My wife still has ios 6 on her ipad (she likes the look). I will do the 7.1 upgrade when it is released. Should there be any issues going from 6 directly to 7.1? Thanks!

    Hi to All, My wife still has ios 6 on her ipad (she likes the look). I will do the 7.1 upgrade when it is released. Should there be any issues going from 6 directly to 7.1? Thanks!

    There shouldn't be. I went from iOS5.whatever to iOS6.1 with no issues.
    Just make sure to back everything up before you do it, just in case all doesn't go as planned.
    I always do mine the old fashioned way, download the full OS via iTunes so if you've already got it linked to a computer and been using iTunes to do updates/syncing that's how I'd suggest you do it.

  • Why can't I watch videos that my daughter sends to me from her iPad   I am very new on my ipad2

    Why can't I watch videos that my daughter sends me from her iPad?  I am very new on my ipad2.  I have no idea what my operating system is.

         Under the iPad specifications they support the following video types:
    iPad: Technical Specifications
    AirPlay Mirroring to Apple TV support at 720p
    Video mirroring and video out support: Up to 1080p with Apple Digital AV Adapter or Apple VGA Adapter (adapters sold separately)
    Video out support at 576p and 480p with Apple Component AV Cable; 576i and 480i with Apple Composite AV Cable (cables sold separately)
    Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
         The iPad and iPad 2 support the same video types. You cannot open a .mov file via e-mail to the best of my knowledge (on iPad). Only YouTube videos and app specific videos* can be opened via e-mail on the iPad.
    * Such as PBS News Hour, TED, etc.
         If both of you use a social network such as Facebook she could upload the videos and can post them on your wall.

Maybe you are looking for