TS5376 After following all the instructions to remove itunes and reinstall I am still unable to download Itunes setup

I have followed all the instructions for uninstalling all the componets of Itunes in order to reinstall Itunes but I am still unable to download Itunes installer or setup.  How do I fix this issue?

I couldn't download from the normal download link provided (http://www.apple.com/itunes/download/), but I searched the internet and found this link from apple support that worked for me to download  iTunes 11.1.4 for Windows (64-bit):  http://support.apple.com/kb/dl1615 

Similar Messages

  • HT4352 I have followed all the instructions on home sharing and it used to work perfectly.  With the new apple OS upgrade my apple TV now longer sees anything, even though I I applied all home sharing settings again.  Anyone know how to fix this?

    I am trying to get home sharing to work on the applie tv and its not working after a Mac OS update.  It has not worked for about a month and use to work fine.  Has anyone else experienced this problem.  Is Apple working on a fix for the problem?  Is there a work around?
    Thanks,
    Anthony

    A frequent cause of consistent failure to enable AirPlay or HomeSharing at all, is the service being blocked on the network. Make sure your network isn't hidden, has a unique name, that MAC address authentication is disabled, security is set to use WPA 2 Personal and that there is only one router/device acting as a DHCP server and providing NAT services.
    Make sure your router/computer allows access over the following ports
    Port
    Type
    Protocol
    Used By
    53
    TCP/UDP
    DNS
    DNS
    80
    TCP
    HTTP
    AirPlay, iTunes Store
    123
    TCP/UDP
    NTP
    Network Time
    443
    TCP
    HTTPS
    AirPlay, PhotoStream, iTunes Store
    554
    TCP/UDP
    RTSP
    AirPlay
    1900
    UDP
    SSDP
    Bonjour
    3689
    TCP
    DAAP
    iTunes, AirPlay, HomeSharing
    5297
    TCP
    Bonjour
    5298
    TCP/UDP
    Bonjour
    5350
    UDP
    NAT
    Bonjour
    5351
    UDP
    NAT
    Bonjour
    5353
    TCP/UDP
    MDNS
    Bonjour, AirPlay, HomeSharing
    8000-8999
    TCP
    iTunes Radio Streams
    42000-42999
    TCP
    iTunes Radio Streams
    49159
    UDP
    MDNS (Win)
    Bonjour, AirPlay
    49163
    UDP
    MDNS (Win)
    Bonjour, AirPlay
    Refer to your router manual/manufacturer for any settings that are specific to that model.
    Another frequent cause of consistent failure to enable AirPlay or HomeSharing at all, is security software, in many cases configuring it correctly, disabling it or even uninstalling it can help, but in some cases the security software can cause problems that simply reconfiguring, disabling or uninstalling cannot reverse.
    If you are consistently unable to activate AirPlay, have tried all the steps in this article and have security software installed on your system, you might benefit from contacting its provider or participating in any online forums they run to discuss the matter with them.

  • HT4437 After following all the instructions when I open a photo now AirPlay symbol appears

    After following the instructions I open a photo on my iPhone and no air play symbol appears. All other functions of the Apple TV seem to be working well

    If Larry's suggestion re iPLM doesn't help there's always the last ditch effort solution:
    Starting over from scratch with new library
    Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
    1. Open the library package like this.
    2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
    3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
    This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
    Note:  your current library will be left untouched for further attempts at a fix if so desired.

  • My phone randomly shut off. When I turned it back on it said it needed to restore, to plug it into itunes. When I did, and tried to restore it, it failed with a code 21. I have followed all the instructions, it still isn't working. Please help!

    My phone randomly shut off. When I turned it back on it said it needed to restore, to plug it into itunes. When I did, and tried to restore it, it failed with a code 21. I have followed all the instructions, it still isn't working. I've uninstalled and reinstalled all that the steps told me to, I've updated everything in my computer. I don't know what else to do. My phone will just show the apple sign and the itunes plug in sign.

    Hey Carolefromthelou,
    The following link will provide steps on how to best remove all traces of iTunes from your PC and then reinstall it:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • I've followed all the instructions in order to restore my ipod touch yet it won't even turn off or show the red slipper to shut down. I've tried holding down both buttons each at a time it doesn't do anything. Anybody ever experience this? If so help?

    I've followed all the instructions in order to restore my ipod touch yet it won't even turn off or show the red slipper to shut down. I've tried holding down both buttons each at a time it doesn't do anything. Anybody ever experience this? If so help? Should I just go to the apple store?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I'm trying to change my secret question because I forgot to answer. Followed all the instructions, but not yet I receive a message to let me change the answer, I tried more than once, but without an answer

    I'm trying to change my secret question because I forgot to answer.
    Followed all the instructions, but not yet I receive a message to let me change the answer, I tried more than once, but without an answer

    See this thread:
    https://discussions.apple.com/message/23280567#23280567

  • HT4864 I am using Entourage and followed all the instructions above and still getting IMAP Server error.  Error msg:Security failure.  Data decryption error.

    I am using Entourage and followed all the instructions above and still getting IMAP Server error.  Error msg:Security failure.  Data decryption error.

  • I follow all the instructions to change my "short" name, but when I log back in to my account, it's like starting over from scratch, help?

    I follow all the instructions to change my "short" name, but when I log back in to my account, it's like starting over from scratch, help?

    https://discussions.apple.com/message/6164451#6164451

  • TS3198 I keep getting No Network after following all the steps it is a TMobile SIM is it possible the SIM is too old of a card?

    I recently unlocked our iPhone 3gs for my daughter to use on TMobile.  I am 99% sure I followed all the instructions properly except it still says No Network.  Basically it appears as though it is not reading the SIM.  When hooked up to iTunes it says the SIM is not supported.  I turned 3G off hoping that would help and still same issue.  Is the SIM too old??????????  Or any help would be appreciated.

    If it says "SIM is not supported" then it is not unlocked. Try restoring again with the orinanal AT&T SIM card, and make sure you are connected to the internet.
    Hope this helps!

  • I wanted to host my iWeb pages on Dropbox.  I followed all the instructions but it still doesn't work.

    I guess in October of 2013, Dropbox changed their program so you don't need a public folder to place your files in.  I followed the instructions on numerous youtube and google result sites on how to do this.  I thought I followed all the instructions but it still doesn't work.  I downloaded Dropbox and configured it as instructed.  I created a domain at .tk and when I put the URL in my browser, I see that .tk does go to my dropbox index html but it is a blank screen.  Can anyone tell me what I'm doing wrong?

    I would ask this to dropbox it could be they have blocked the option to avoid being used as free web hotels

  • I have followed all the instructions for setting the font size,but it remains very tiny (6 or 8 point). Why?

    Though the font on the desktop and email programs is fine (14 or 16 point), on the google sedarch pages or any websites that are accessed via Firefox, it is tiny. What's wrong? How can I make things more legible? I am working on a laptop and followed all the instructions given in DISPLAY.
    Thanks for any advice.

    You can use an extension to set a default font size and page zoom on web pages.
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • I downloaded a ringtone from Itunes and apple owned company to my Iphone4 and then followed all the instructions sent to itunes on pc and synced back to iphone still got squat. Why does apple need to be so hard for something so simple.

    I downloaded a ringtone from itunes (an apple company) to my iphone4 (an Apple product). Followed all the instructions from "Help" boards, sent to itunes on my pc converted to m4r synced back to iphone and still got squat. I thought iphones and apple were supposed to be so user friendly? Any other phone you download a ringtone click on it "use as ringtone" and your done.

    Frank, thanks for your note.  I wrote "COMPLETED" because I had gone to a lot of effort to get the content of the book precisely as I wanted it. I would fully expect to see my level of effort and care matched by functional competence in Aperture 3 to render the book the way I created it.  Too much to ask?
    And yes, I upgraded the Aperture 2 Library first.  [Not ALL my tens of 000s of pix, because I use Lightroom selectively for photo editing. But Yes to the Aperture 2 Library.]  That step took a number of minutes, but seemed to work fine (no error messages of any kind).
    Then I opened the existing book project in Aperture 3, which followed some "magic-box" process that took a minute or so.  As I said, when that step was done, by all appearances the book was ready to submit for printing - until I examined the photos a little more closely.  You did see the blurry example I included, didn't you? That is what each and every photo looks like.
    Text-box content appears to have been rendered pertectly, for the record (including captions).
    So, ... is this result something you have heard of before?  Do you know of a one-step solution?  Or am I looking at an extended picture-by-picture fix?

  • HT5312 can't reset my apple id security question. I follow all the instructions and still I can't reset it. All I get is this We're sorry. The system is unavailable. Please try again

    can't reset my apple id security question. I follow all the instructions and still I can't reset it. All I get is this We’re sorry. The system is unavailable. Please try again

    If you are trying the reset link to your rescue email account and it's not working (Apple may have been doing maintenenace) then have you tried clearing your browser's history and cache and/or trying a different browser ?
    If that doesn't work either then you can try contacting iTunes Support or Apple to get them reset.
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57

  • I've followed all the instructions to the letter but still can't access the signatures in my Mail account. Any ideas?

    I've followed all the instructions to the letter but still can't access the signatures in my Mail account. Any ideas?

    Hello,
    In Mail Preferences>Signatures, what shows for All Sigs, And the ones assigned to a particular account?
    Then in Compose a new Mail, what shows for Sig choices?

  • HT201272 I have just downloaded an app to my computer through itunes.  It shows up as downloaded to my ipad, which I don't have.  I want it on my computer.  I follow all the instructions and always come to a deadend.  Help!  Thanks!

    I have just downloaded an app to my computer through itunes.  It shows up as downloaded to my ipad, which I don't have.  I want it on my computer.  I follow all the instructions and always come to a deadend.  Help!  Thanks!

    Welcome to the Apple Community.
    You can re-download content purchased from the app store using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
    Why do you want it on your computer, apps won't run on a computer.

Maybe you are looking for