TSV_TNEW_PAGE_ALLOC_FAILED issue

Hi All,
I am getting this error when loading data from one ODS obj. to another ODS object. When I searched in the ABAP dumps I found out, it's happening because of the space in internal memory is not sufficient, but yesterday & day before yesterday almost 10000 records loaded where today it's only 15 in number. Can anybody through some light......
How to fix the issue?
What all thing I should look into?
Regards,
Kironmoy Banerjee

Hi,
It occurs mostly when your memory is not sufficient.
Check whether have you cleared your internal tables after manipulation in your routines. If you are not clearing the internal tables in your routine also might cause this problem. So confirm that you clear all your internal table in your routines.

Similar Messages

Internal table Memory Issue Exception TSV_TNEW_PAGE_ALLOC_FAILED

Hi experts,
I am working on a conversiojn programme. This programme is dealing with 4 input files.
Each of these files is having more than 50,000 records. I am reading the corresponding application server files to fill
the internal tables related to these files.
The files are being read properly and internal tables are being filled.
However when i try to assign any of these 4 internal tables to other temproray internal tables in programme(requirement)
i get a dump TSV_TNEW_PAGE_ALLOC_FAILED.
The dump is related to memory issue.
I think The memory available in the programme at this point is not sufficient for table assignment.
Please suggest any alternatives where i can save any memory .
Changig of basis setting is not an option.
Regards,
Abhishek Kokate

Hi Kiran,
I am not agree with you , I am agree with Hermann.
While writting file you restrict the record max 5,000 to 10,000 records and process don't store the mutch data into internal table.
After every used refresh the internal table, Declare table where necessary.
But you can try to avoid the copy cost.
Rgds
Ravi Lanjewar

TSV_TNEW_PAGE_ALLOC_FAILED Shortdump , memory issue

Hello,
We are facing one issue of Memory dump for one of the Background Job. The Job is fetching a very huge data and it is failing with the shortdump TSV_TNEW_PAGE_ALLOC_FAILED. I have asked application user to brake the variant of period and now he is running job for 1 single day. But since the amount of data volume is so huge, it is not going thru.
~
The short dump gives following information about memory parameter value:
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 6225552
Extended memory (EM)........... 1001392792
Assigned memory (HEAP)......... 2998638656
Short area..................... " "
Paging area.................... 24576
Maximum address space.......... 18446744048641535328
~
The termination occurred in line 1009 of the source code of the (Include)
1009 -> SELECT * FROM .............
~
Instance Profile Memory parameter values :
rdisp/ROLL_SHM 8000
rdisp/ROLL_MAXFS 16384
ztta/roll_area 6500000
ztta/roll_first 1
ztta/roll_extension 1000000000
abap/heaplimit 20000000
abap/heap_area_nondia 3000000000
abap/heap_area_dia 3000000000
abap/heap_area_total 6000000000
~
Please note that once we got the dump "SYSTEM_IMODE_TOO_LARGE" and we have set the abap/max_imode = four_gb.
~
Can any one help me to resolve this error ? how much memory I can assign ? How to calculate memory available and how to calculate memory required ?
The job is very important from business point of view and do not have time to optimize the code as of now.
Any help will be higly appreciated.
Thanks
Best Regards,
Basis CK

Hi Markus,
I have gone tru the SAP note you have recommanded. Actually our requirement is that this job is very urgent from business point of view and code optimization will take time as we need to first test in sandbox and then the production. Looking at the scenario, I have decided with this approach :
Step 1 -> Remove parameter abap/max_imode = four_gb from instance profile as this parameter is not required.
Please refer note SAP note 548845 - Internal modes users more than 2 GB. According to this note "As of SAP_BASIS 6.20 Support Package 38 and SAP_BASIS 6.40, you do no longer require the profile parameter. Therefore, delete this parameter from the profile; otherwise there is an upper limit of 4 GB."
(Here I assume that by removing the parameter abap/max_imode, it can go beyound 4GB)
Step 2 -> Increase the memory dyanimcally thru RSMEMORY program for that application server and run the Background Job to make it finish successfully.
RSMEMORY Parameter is showing following value. Is it possible for you to recommand how much we can increase the memory ?*
Result of RSMEMORY
~~~~~~~~~~~~~~~~~
Quota Dialog
Step Memory class Size [bytes]
1 1
2 1 1000000000
3 6500000
4 2 3000000000
5
Memory classes: ROLL(0) EM(1) HEAP(2)
 1 6500000
 2 2 3000000000
 3 1 1000000000
 4
 5
Memory classes: ROLL(0) EM(1) HEAP(2)
abap/heap area dia: 3000000000
abap/heap area nondia: 3000000000
abap/heap area total: 6000000000
em/stat log timeout: 600
em/stat log size MB: 20
Any help will be highly appreciated.
Thanks
Best Regards,
Basis

TSV_TNEW_PAGE_ALLOC_FAILED dump Issue

Hello All,
We are facing this dump error when executed from SM35.
It is a ECC 6 PRD system on Windows(64bit) & SQL server.
What Happened:
Information on where terminated
    Termination occurred in the ABAP program "SAPLSBDR" - in "BDC_OBJECT_SELECT".
    The main program was "SAPMSBDC_CC ".
    In the source code you have the termination point in line 59
    of the (Include) program "LSBDRU04".
How to correct the error
    The amount of storage space (in bytes) filled at termination time was:
    Roll area...................... 4019392
    Extended memory (EM)........... 2002743520
    Assigned memory (HEAP)......... 2000021120
    Short area..................... " "
    Paging area.................... 32768
    Maximum address space.......... " "

Hello Venkat,
Please find the details as per the SAP Note,
1.Memory consumption
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 4019392
Extended memory (EM)........... 2002743520
Assigned memory (HEAP)......... 2000021120
Short area..................... " "
Paging area.................... 57344
Maximum address space.......... " "
2.System Data
System environment
    SAP-Release 700
    Application server... "SAP-PROD"
    Network address...... "172.23.0.112"
    Operating system..... "Windows NT"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SAP-PROD"
Database type..... "MSSQL"
Database name..... "AEP"
Database user ID.. "aep"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Nov 18 2008 22:53:36"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 185
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
3.R/3 Storage Parameter
a.SAP Memory
Roll memory     Dialog session   kB     6,348
                         Nondialog sess. kB     6,348
                          Available        kB   262,144
                          in shared memory kB   262,144
                          on disk          kB         0
                           Used             kB     9,778
                           Maximum used     kB    20,280
Paging memory   Session buffer   kB     1,200
                Available        kB   262,144
                in shared memory kB   131,072
                on disk          kB   131,072
                Used             kB    13,721
                Maximum used     kB   262,136
Extended memory Dialog session   kB 1,953,125
                Nondialog sess. kB 1,953,125
                Available        kB 9,904,128
                Used             kB 2,801,664
                Maximum used     kB 5,255,168
Heap memory     Dialog session   kB 1,953,125
                Nondialog sess. kB         0
                Used             kB         0
                Maximum used     kB 9,908,208
b. Current Parameters
Profile Parameter     Value       Unit Comment
Roll, extended and heap memory EXTM
ztta/roll_area                  6500000     Byte
ztta/roll_first                 1           Byte
ztta/short_area                 4000000     Byte
rdisp/ROLL_SHM                  32768       8 kB
rdisp/PG_SHM                    16384       8 kB
rdisp/PG_LOCAL                  150         8 kB
em/initial_size_MB              9676        MB
em/blocksize_KB                 4096        kB
em/address_space_MB            4096        MB
ztta/roll_extension            2000000000 Byte Max.
abap/heap_area_dia              2000000000 Byte Max.
abap/heap_area_nondia           0           Byte Max.
abap/heap_area_total           10146021376 Byte Max.
abap/heaplimit                  40000000    Byte
abap/use_paging                 0
Edited by: Hasan Bilali on Mar 6, 2012 4:38 PM
Edited by: Hasan Bilali on Mar 6, 2012 4:41 PM

SAP 64bit Linux application server (Linux on Power) memory config issues

Hello Everyone,
Let me give some background. I have been tasked with replacing our AIX6.1 SAP application server with new Linux on Power servers (SLES11SP3)
Our current production BW application servers (AIX) are running fine given their current setup. We are fine implementing the same size of the AIX systems on the new Linux systems, but we now have more room to grow in the fur, however when I tried to implement the Linux server using the same memory sizing I am getting runtime errors: "TSV_TNEW_PAGE_ALLOC_FAILED" with a specific user created program and process chain. The AIX servers do not run into this issue running the exact same program. When this process runs, it utilizes 3 BTC process for the program.
Using the note 941735, I have tried to correctly setup the system using STD memory implementation, however I have a feeling that I am missing something or setup something incorrectly which is causing the above issue. Looking in ST02 here is the SAP buffer parameters for two of the systems. Perhaps someone might notice something that I am not see or point me in the right direction. Please let me know if more parameters from the profile are needed. Thanks!
AIX system (existing):
ztta/roll_area              6500000    Byte Roll area per workprocess (total)
ztta/roll_first             1          Byte First amount of roll area used in a dialog WP
ztta/short_area             3200000    Byte Short area per workprocess
rdisp/ROLL_MAXFS            32768      8 kB Maximum roll file size
rdisp/ROLL_SHM              16384      8 kB Part of roll file in shared memory
rdisp/PG_SHM                16384      8 kB Part of paging file in shared memory
rdisp/PG_LOCAL              150        8 kB Paging buffer per workprocess
em/initial_size_MB          2027       MB   Initial size of extended memory
em/blocksize_KB             4096       kB   Size of one extended memory block
em/address_space_MB         4092       MB   Address space reserved for ext. mem. (NT only)
em/global_area_MB           256        MB   Extended global memory
ztta/roll_extension         2000000000 Byte Max. extended mem. per session (external mode)
abap/heap_area_dia          2000000000 Byte Max. heap memory for dialog workprocesses
abap/heap_area_nondia       2000000000 Byte Max. heap memory for non-dialog workprocesses
abap/heap_area_total        2000000000 Byte Max. usable heap memory
abap/heaplimit              250000000 Byte Workprocess restart limit of heap memory
abap/use_paging             0               Paging for flat tables used (1) or not (0)
abap/shared_objects_size_MB 20         MB   Shared objects
Linux system (new):
ztta/roll_area              6500352    Byte Roll area per workprocess (total)
ztta/roll_first             1024       Byte First amount of roll area used in a dialog WP
ztta/short_area             3200000    Byte Short area per workprocess
rdisp/ROLL_MAXFS            131072     8 kB Maximum roll file size
rdisp/ROLL_SHM              32768      8 kB Part of roll file in shared memory
rdisp/PG_SHM                16384      8 kB Part of paging file in shared memory
rdisp/PG_LOCAL              150        8 kB Paging buffer per workprocess
em/initial_size_MB          4092       MB   Initial size of extended memory
em/blocksize_KB             4096       kB   Size of one extended memory block
em/address_space_MB         4096       MB   Address space reserved for ext. mem. (NT only)
em/global_area_MB           256        MB   Extended global memory
ztta/roll_extension         2000683008 Byte Max. extended mem. per session (external mode)
abap/heap_area_dia          2000683008 Byte Max. heap memory for dialog workprocesses
abap/heap_area_nondia       2000683008 Byte Max. heap memory for non-dialog workprocesses
abap/heap_area_total        2000683008 Byte Max. usable heap memory
abap/heaplimit              250609664 Byte Workprocess restart limit of heap memory
abap/use_paging             0               Paging for flat tables used (1) or not (0)
abap/shared_objects_size_MB 20         MB   Shared objects

Yes sapconf has been installed. sapconf however only sets the kernel settings.
I was able to resolve the issue by having Zero Admin tool using 'es/implementation = map' and setting the PHYS_MEMSIZE to the desired amount. Then commenting out all the values that are defaulted in the 32bit version of the memory management guide for linux and let it size many of the values. Then I simply copied those from st02. I updated the profile with those values to override default for 'es/implementation = std' and commented out PHYS_MEMSIZE as it is not needed. In a nut shell, the following parameters were updated.
es/implementation = std
em/address_space_MB = 4096
em/blocksize_KB = 4096
em/initial_size_MB = 14320
em/max_size_MB = 14326
rdisp/PG_MAXFS = 131072
rdisp/PG_SHM = 16384
rdisp/ROLL_MAXFS = 131072
rdisp/ROLL_SHM = 131072
ztta/roll_area = 6500352
ztta/roll_extension = 4000000000
ztta/roll_extension_dia = 4000000000
ztta/roll_extension_nondia = 4000000000
ztta/roll_first = 1

MEMORY_NO_MORE_PAGING and TSV_TNEW_PAGE_ALLOC_FAILED

Hi All,
We are facing these errors approx. daily (but not everyday):
MEMORY_NO_MORE_PAGING
TSV_TNEW_PAGE_ALLOC_FAILED
Now, I searched the Forum but there is no acceptable answer for the current issue. Some person said that it could be possible if a user have entered any illegal range in program.
How can i modify the parameter values? RZ11 shows all parameters but not in RZ10(where we can modify).
Here is the current configuration:
Roll, extended and heap memory EXTM
ztta/roll_area        3000320    Byte Roll area per workprocess (total)
ztta/roll_first       1024       Byte First amount of roll area used in a dialog WP
ztta/short_area       3200000    Byte Short area per workprocess
rdisp/ROLL_SHM        32768      8 kB Part of roll file in shared memory
rdisp/PG_SHM          16384      8 kB Part of paging file in shared memory
rdisp/PG_LOCAL        150        8 kB Paging buffer per workprocess
em/initial_size_MB    14500      MB   Initial size of extended memory
em/blocksize_KB       4096       kB   Size of one extended memory block
em/address_space_MB   4096       MB   Address space reserved for ext. mem. (NT only)
ztta/roll_extension   2000683008 Byte Max. extended mem. per session (external mode)
abap/heap_area_dia    2000683008 Byte Max. heap memory for dialog workprocesses
abap/heap_area_nondia 0          Byte Max. heap memory for non-dialog workprocesses
abap/heap_area_total 6442450944 Byte Max. usable heap memory
abap/heaplimit        40894464   Byte Workprocess restart limit of heap memory
abap/use_paging       0               Paging for flat tables used (1) or not (0)
I also read that some parameter values like Roll Area should not be changed like here: http://help.sap.com/saphelp_nw70/helpdata/en/02/96274f538111d1891b0000e8322f96/content.htm
Furthermore, some suggestions were to modify the Heap Parameters, Roll etc...
Here is our PRD SPEC:
Processor: Intel Xeon X5450 3.00GHz
RAM: 20 GB
HDD: 140 GB Internal
SAN: 700 GB RAID
Please Advise,
Regards.

Hi Michael,
Thank you for your information, here is the current dump (most recent one):
Runtime Errors         MEMORY_NO_MORE_PAGING
Date and Time          13.10.2010 14:32:19
How to correct the error
     The amount of storage space (in bytes) filled at termination time was:
     Roll area...................... 16192
     Extended memory (EM)........... 305858320
     Assigned memory (HEAP)......... 0
     Short area..................... " "
     Paging area.................... 16384
     Maximum address space.......... " "
And Current View EM (in ST02):
SAP Memory      Curr.Use % CurUse[KB] MaxUse[KB] In Mem[KB] OnDisk[KB] SAPCurCach HitRatio
Roll area           40.18     24,274     24,976     262,144          0   IDs           99.59
Page area           10.94     28,678     34,400     131,072    131,072   Statement     97.00
Extended memory     31.43 4,665,344 5,296,128 14,843,904          0                  0.00
Heap memory                  139,015          0     139,015          0                  0.00
Detailed Information:
Roll memory     Dialog session   kB      2,930
                Nondialog sess. kB      2,930
                Available        kB     60,416
                in shared memory kB    262,144
                on disk          kB          0
                Used             kB     24,274
                Maximum used     kB     24,976
Paging memory   Session buffer   kB      1,200
                Available        kB    262,144
                in shared memory kB    131,072
                on disk          kB    131,072
                Used             kB     28,678
                Maximum used     kB     34,400
Extended memory Dialog session   kB 1,953,792
                Nondialog sess. kB 1,953,792
                Available        kB 14,843,904
                Used             kB 4,665,344
                Maximum used     kB 5,296,128
Heap memory     Dialog session   kB 1,953,792
                Nondialog sess. kB          0
                Used             kB    139,015
                Maximum used     kB    139,015
Current Parameters Setting:
Buffer Name                    Comment
Profile Parameter     Value      Unit Comment
Roll, extended and heap memory EXTM
ztta/roll_area        3000320    Byte Roll area per workprocess (total)
ztta/roll_first       1024       Byte First amount of roll area used in a dialog
ztta/short_area       3200000    Byte Short area per workprocess
rdisp/ROLL_SHM        32768      8 kB Part of roll file in shared memory
rdisp/PG_SHM          16384      8 kB Part of paging file in shared memory
rdisp/PG_LOCAL        150        8 kB Paging buffer per workprocess
em/initial_size_MB    14500      MB   Initial size of extended memory
em/blocksize_KB       4096       kB   Size of one extended memory block
em/address_space_MB   4096       MB   Address space reserved for ext. mem. (NT on
ztta/roll_extension   2000683008 Byte Max. extended mem. per session (external mo
abap/heap_area_dia    2000683008 Byte Max. heap memory for dialog workprocesses
abap/heap_area_nondia 0          Byte Max. heap memory for non-dialog workprocess
abap/heap_area_total 6442450944 Byte Max. usable heap memory
abap/heaplimit        40894464   Byte Workprocess restart limit of heap memory
abap/use_paging       0               Paging for flat tables used (1) or not (0)
Please guide me if it requires any further analysis.

Short Dump       TSV_TNEW_PAGE_ALLOC_FAILED

Hi All,
I am facing the short dump "TSV_TNEW_PAGE_ALLOC_FAILED" problem in my PRD system.
Please find ST22 log and suggest the solution:
Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time          18.11.2009 12:12:09
Short text
     No more storage space available for extending an internal table.
What happened?
     You attempted to extend an internal table, but the required space was
     not available.
What can you do?
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
     Try to find out (e.g. by targetted data selection) whether the
     transaction will run with less main memory.
     If there is a temporary bottleneck, execute the transaction again.
     If the error persists, ask your system administrator to check the
     following profile parameters:
     o ztta/roll_area            (1.000.000 - 15.000.000)
            Classic roll area per user and internal mode
            usual amount of roll area per user and internal mode
o ztta/roll_extension       (10.000.000 - 500.000.000)
        Amount of memory per user in extended memory (EM)
o abap/heap_area_total      (100.000.000 - 1.500.000.000)
        Amount of memory (malloc) for all users of an application
        server. If several background processes are running on
        one server, temporary bottlenecks may occur.
        Of course, the amount of memory (in bytes) must also be
        available on the machine (main memory or file system swap).
        Caution:
        The operating system must be set up so that there is also
        enough memory for each process. Usually, the maximum address
        space is too small.
        Ask your hardware manufacturer or your competence center
        about this.
        In this case, consult your hardware vendor
abap/heap_area_dia:        (10.000.000 - 1.000.000.000)
        Restriction of memory allocated to the heap with malloc
        for each dialog process.
Parameters for background processes:
abap/heap_area_nondia:        (10.000.000 - 1.000.000.000)
        Restriction of memory allocated to the heap with malloc
        for each background process.
Other memory-relevant parameters are:
em/initial_size_MB:         (35-1200)
        Extended memory area from which all users of an
        application server can satisfy their memory requirement.
or analysis
The internal table "\FUNCTION-POOL=EL40\DATA=GL_NODETAB[]" could not be further
extended. To enable
Error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 2160
Number of rows: 1782088
Allocated rows: 1782088
Newly requested rows: 4 (in 1 blocks)
to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 4419712
Extended memory (EM)........... 2002743520
Assigned memory (HEAP)......... 2000049152
Short area..................... " "
Paging area.................... 32768
Maximum address space.......... " "
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"SAPLEL40" or "LEL40U11"
"ISU_ELWEG_HIERARCHY_BUILD"
Please help me out to resolve the issue.
Regards,
Nitin Sharma

hI cHANDRU,
tHANKS FOR YOUR RESPONSE:
pLEASE FIND BELOW MENTIONED DETALS:
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SVPSAPECP01"
Database type..... "MSSQL"
Database name..... "ECP"
Database user ID.. "ecp"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Nov 18 2008 22:53:36"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 185
Patch text.. " "

Run time error : TSV_TNEW_PAGE_ALLOC_FAILED in st22

Hi All,
we are getting runtime error : TSV_TNEW_PAGE_ALLOC_FAILED in production system. for this report rsppfprocess we have batch jobs so may be its running all the action definition and coming up with consuming more memory ? we already checked with basis but they are saying its rsppfprocess program issue. can you please guide me how to solve this issue.
Jimmi.

Hi Jimmi,
The error TSV_NEW_PAGE_ALLOC_FAILED means that more memory was requested
because the program needed to expand an internal table, but is not available.
When Extended Memory is used up, the process will go into PRIV mode
as it starts using Heap Memory (or vice-versa). No other user will be able to use this work process while it is in PRIV mode.
If there is enough heap for it to finish, you will not see the error TSV_NEW_PAGE_ALLOC_FAILED and the work process will be freed.
This seems to be a problem with loading of shared memory.
Check value of parameter abap/shared_objects_size_MB in RZ11.
Set the parameter to minimum 250 and increase it when necessary, as per SAP note 1281896. You must start the system newly so that the change becomes effective.
Also take a look at SAP Note 1166259.
Gervase

ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED

Hi,
Please help me. I'm having ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED job cancelled for my payment run F110.
Before this we having performance issue for the payment run F110. We implemented notes (SNOTE 1343823) to solve the performance issue. And today when we wanted to do payment run some of the payment run is automatically cancelled by system.
Tq

hi,
Try this Note 1250607 - Long runtime and high memory reqmt for payment program
thanks and regards
Praveen.J

Short dump TSV_TNEW_PAGE_ALLOC_FAILED when import SAPKB70016

Hi all,
I´m trying to import the support package SAPKB70016 im my QAS system and I got an error. The import stop on phase XPRA_EXECUTION and I saw at the tcode sm37 that there is a job running with the name RDDEXECL. This job is canceled with the dump TSV_TNEW_PAGE_ALLOC_FAILED. I already changed some parameters and also I applied some notes but I can´t solve this issue.
Parameter changed                Before                 After
ztta/roll_area                        30000000          100000000
ztta/roll_extension               4000317440        8000000000
abap/heap_area_dia        2000683008        4000683008
abap/heap_area_nondia      2000683008        4000683008
abap/heap_area_total       2000683008        4000683008
em/initial_size_MB                             392                    1024
abap/shared_objects_size_MB      20                     150
es/implementation                           map                     std
JOB LOG:
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server FQAS were synchronized
ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED
Job cancelled
ST22 LOG:
Memory location: "Session memory"
Row width: 510
Number of rows: 0
Allocated rows: 21
Newly requested rows: 288 (in 9 blocks)
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server FQAS_QAS_01 o
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhau
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1897
The error reported by the operating system is:
Error number..... " "
Error text....... " "
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 99661936
Extended memory (EM)........... 8287273056
Assigned memory (HEAP)......... 1376776176
Short area..................... " "
Paging area.................... 49152
Maximum address space.......... 18446743890583112895
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"CL_ENH_UTILITIES_XSTRING======CP" or "CL_ENH_UTILITIES_XSTRING======CM008"
"GET_DATA"
Now, I don´t know what I can do to solve this problem.
Can you help me?
Thanks

Hi all,
Gagan, I already changed my parameters according to the above post. I increased this parameters until maximum allowed but the dump still persists.
Bhuban
In this server I have 16GB RAM and 600GB HD.
             total       used       free     shared    buffers     cached
Mem:      16414340    4973040   11441300          0     454436    3572592
-/+ buffers/cache:     946012   15468328
Swap:     20479968          0   20479968
Size Used     Avail Use% Mounted on
441G 201G   218G 48% /oracle
20G     6.5G    12G   36% /sapmnt
25G     21G    2.7G   89% /usr/sap/trans
25G    8.8G   15G    39% /usr
20G    14G    5.1G    73% /
Anil, I already stop my appl and my db, I rebooted my OS too and after i tried again, no success.
What else can i do?
Thanks for all.

TSV_TNEW_PAGE_ALLOC_FAILED error while executing FAGLL03

Dear Experts,
We are on AIX, Oracle 10g and ECC 6.0
One of our FI consultant is trying to execute a report using the standard T-Code: FAGLL03 for a range of 1 year, but when she executes this she gets the following dump (runtime error)
TSV_TNEW_PAGE_ALLOC_FAILED
So on working on this error i found that we need to set few abap parameters, for which i have done the following parameter settings..
rsdb/ntab/ftabsize 41000
Previous Value: 30000
rsdb/ntab/entrycount 25000
Previous Value:20000
abap/buffersize 900000
Previous Value: 400000
rsdb/cua/buffersize 9000
Previous Value: 5000
zcsa/presentation_buffer_area 8388608
Previous Value:8388608
zcsa/table_buffer_area 41943040
Previous Value:41943040
rtbb/buffer_length 25000
Previous Value:20000
rsdb/obj/buffersize 25000
Previous Value: 4096
abap/heap_area_dia: 3000000000
Previous Value: 2000000000
abap/heap_area_nondia: 0
Previous Value: 2000000000
abap/heap_area_total: 5000000000
Previous Value: 2000000000
After doing these chnages and there was a problem restarting the server, and then i made changes to the abap/buffersize parameter from 900000 to 600000 and then 500000 but the server never restarted.
So finally i have copied the instance profile which was earlier backed up back into the profile folder and the restarted the server which is working fine now.
Now my question is can any one plese help with the best settings so that i can resolve the FI issue and restart my server without any problems.
Reward points for sure.
Awaiting for your quick reply
Thanks in Advance
Regards
Harry

Hi,
I suggest you to follow below SAP Notes:
#146289   Parameter recommendations for 64-bits SAP Kernel
#425207   SAP memory management, current parameter ranges
#153641   Swap Space requirement for R.3 64-bits kernel
you should have at least 20GB swap space configured, at least 8GB RAM configured
On heap parameter:
      abap/heap_area_nondia: 0
      Previous Value: 2000000000
why you configure zero ? please maintain at 2GB
abap/buffersize is a very sensitve parameter. simply increasing it will end up in system emergency mode with PXA shared memory dump.
if you are running windows, then please activate ZAMM.
If you are running AIX, i suggest you to look into SAP Note 789477.
cheers,
Vincent

TSV_TNEW_PAGE_ALLOC_FAILED in Bw server,while execut t.code RSRT(netwear 7.3)

Dear experts,
when i execute T.code:RSRT, i get error like a no more more available in extend memory.In T.code: Db02 shows ()
1) An exception with the type CX_SY_STRUCT_COMP_NAMEoccurred, but was neither handled locally, nor declared in a RAISING clause
2) Wrong number of input parameters [GET_INPUT_STRUCT].
In t.code:st22
TSV_TNEW_PAGE_ALLOC_FAILED
TSV_TABH_POOL_NO_ROLL_MEMORY
Please help to slove
Regards,
Prabaharan B

Hi,
You need to increase the abap heap limits on the system.
Please check the following Notes which describe this issue :
     020527 Runtime error TSV_TNEW_PAGE_ALLOC_FAILED
     1260912 - Memory overflow note: Dump TSV_TNEW_PAGE_ALLOC_FAILED
     1387739 - Out of memory errors during shadow system operation
Thanks,
Bhavin Vyas

TSV_TNEW_PAGE_ALLOC_FAILED

Dear All,
First let me wish you a very happy and prosperous New Year.
I have one clarification here,
User was running a report with extensive selection,unfortunately the user got the error "TSV_TNEW_PAGE_ALLOC_FAILED"
Then there was shortdump in ST22, saying that " No more storage space available for extending an internal table"
I would like to know that which query was this user running during that time. then i can investigate further what can be done to avoid this problems.
I thank in advance.
Rgds,
Sin
Edited by: sinner icici on Jan 3, 2008 10:57 AM

Hi,
TSV_TNEW_PAGE_ALLOC_FAILED - No more storage space available for extending an internal table.
It is purely the memory issue. you can resolve this by reducing the data selections. For the temporary solution remove the OLAP variable in the data selection if its there and run with less selection It may help and try to use the option in infopackage scheduler as PSA only and Update subseqently in data targets
SAP Note 425207 - SAP memory management, current parameter ranges
SAP Note 972889 - RMCENEUR: Short dump TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Thanks,
JituK

TSV_TNEW_PAGE_ALLOC_FAILED Error

Dear Experts,
I have received multiple short dump Like "TSV_TNEW_PAGE_ALLOC_FAILED" in weekly twice
Server : Sun solaris/Oracle 10g- 64 Bit, 32GB Ram, SAP NetWeaver 2004s
one CI+DB and 3 APP servers.
When I checked Work process level it says
A Tue Aug 10 19:35:56 2010
A WP has reached abap/heaplimit = 40894464 bytes
A
A Tue Aug 10 19:41:14 2010
A *** ERROR => User XXXXXXX reached avail. heapsize = 2045 MB: see ST22 [abstor.c 1779]
A *** ERROR => Increase abap/heap_area_total [abstor.c 1780]
A *** ERROR => heap memory WP0: 1936 MB [abstor.c 1784]
A *** ERROR => heap memory WP1: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP2: 109 MB [abstor.c 1784]
A *** ERROR => heap memory WP3: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP4: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP5: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP6: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP7: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP8: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP9: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP10: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP11: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP12: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP13: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP14: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP15: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP16: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP17: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP18: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP19: 0 MB [abstor.c 1784]
A *** ERROR => heap memory WP20: 0 MB [abstor.c 1784]
My Instance profile value is like
abap/heap_area_dia 2145386496
abap/heap_area_nondia 2145386496
abap/heap_area_total 2145386496
abap/heaplimit 40894464
em/initial_size_MB 4092
Please let me know how to fix this issue, we are getting the same kind of dump for the last one year.. I have 32 GB, Can I increase the value to double the size of the above values. Already red the 425207 regarding this.
If i double the size of my above value, will my handle the load.. ?
Thanks
Malai

Dear Ananda,
yes, O I think so..
I am not sure what the user exactly doing, this the log from St22.
St22 -> error-> No more storage space available for extending an internal table.
It terminated at Line 78
Information on where terminated
 Termination occurred in the ABAP program "CL_RSBOLAP_QV_RESULT_SET======CP" -
 in "EXECUTE".
 The main program was "SAPMSSY1 ".
 In the source code you have the termination point in line 78
 of the (Include) program "CL_RSBOLAP_QV_RESULT_SET======CM002".
Here I attached my code in line no 78
IF o_r_query_view->n_s_rs_state_change-all = rs_c_true
 OR o_r_query_view->n_s_rs_state_change-text_rows = rs_c_true
 OR i_t_char_details IS NOT INITIAL.
 CALL METHOD get_texts
 CHANGING
 c_sx_axis = n_sx_rows.
 ENDIF.
 IF o_r_query_view->n_s_rs_state_change-all = rs_c_true.
1* Use the texts from the text class
 p_th_text = cl_rsdm_read_master_data=>n_th_txt_n.
 GET REFERENCE OF p_th_text INTO n_r_text.
 ELSEIF o_r_query_view->n_s_rs_state_change-text_rows = rs_c_true
 OR o_r_query_view->n_s_rs_state_change-text_columns = rs_c_true
 OR i_t_char_details IS NOT INITIAL.
2* Transfer the single texts (because the texts from the other axis might be missing otherwise)
 LOOP AT cl_rsdm_read_master_data=>n_th_txt_n INTO l_s_txt_n.
 INSERT l_s_txt_n INTO TABLE p_th_text.
 IF sy-subrc <> 0.
 MODIFY TABLE p_th_text FROM l_s_txt_n.
 ENDIF.
 ENDLOOP.
 GET REFERENCE OF p_th_text INTO n_r_text.
 ENDIF.
3* Rollup date and time
 o_r_query_view->n_r_olap->get_topicality_time( IMPORTING e_timestmp_min = l_min_time
 e_timestmp_max = l_max_time ).
When I double click line 77 I found that above on my system.
I am not sure This could be a Routine in internal tables or not..
Please advice.
Thanks
Malai

TSV_TNEW_PAGE_ALLOC_FAILED - No more storage space available for extending

Hi
Im SAP-BW Consultant. I need some code in the transfer rules. But while im loading data , im getting "No more storage space available for extending an internal table.
Pls check my code and modify it so that i can load the data of 5,000,00 records
TYPES: BEGIN OF tys_TG_1,
                     /BIC/ZIUTILICH           TYPE /BIC/OIZIUTILICH,
                   /BIC/ZIRGRCH           TYPE /BIC/OIZIRGRCH,
                   /BIC/ZPRODUCT           TYPE /BIC/OIZPRODUCT,
END   OF tys_TG_1.
TYPES: tyt_TG_1        TYPE STANDARD TABLE OF tys_TG_1
                                                 WITH NON-UNIQUE DEFAULT KEY.
data: e_s_result type tys_TG_1.
data: e_t_result type tyt_TG_1.
DATA : ITAB1 TYPE STANDARD TABLE OF /BIC/AZDSO_HYD00.
DATA : WA_ITAB TYPE /BIC/AZDSO_HYD00.
loop at RESULT_PACKAGE into e_s_result.
     Select /BIC/ZIUTILICH /BIC/ZIRGRCH /BIC/ZPRODUCT                                               FROM       /BIC/AZDSO_HYD00 INTO
                                (e_s_result-/BIC/ZIUTILICH,
                                e_s_result-/BIC/ZIRGRCH,
                                 e_s_result-/BIC/ZPRODUCT)
                             WHERE
                             COMP_CODE = e_s_result-COMP_CODE AND
                             PROFIT_CTR = e_s_result-PROFIT_CTR .
          append e_s_result to e_t_result.
     endselect.
         clear e_s_result.
ENDLOOP.
refresh RESULT_PACKAGE.
move e_t_result[] to RESULT_PACKAGE[].
So im getting TSV_TNEW_PAGE_ALLOC_FAILED - No more storage space available for extending an internal table..
I think there is a problem in the code. pls look it and modify it.
Regards
kumar

Hello Kumar,
The amount of data you can store in an internal table is limited by the width of the table together with the available memory on your machine. If you try to put too much data in your table you'll always get that problem.
As I see it you have a table RESULT_PACKAGE with some fields and based on the entries in that table you select one row out of another table.
You can easily use
Select
/BIC/ZIUTILICH /BIC/ZIRGRCH
/BIC/ZPRODUCT FROM
/BIC/AZDSO_HYD00
INTO TABLE e_t_result
FOR ALL ENTRIES in RESULT_PACKAGE
COMP_CODE = RESULT_PACKAGE-COMP_CODE AND
PROFIT_CTR = RESULT_PACKAGE-PROFIT_CTR .
That still doesn't solve your memory problem hence you should try to process the data in packages, because you obviously don't have enough memory to process all data at once.
You can add the following:
Select
/BIC/ZIUTILICH /BIC/ZIRGRCH
/BIC/ZPRODUCT FROM
/BIC/AZDSO_HYD00
INTO TABLE e_t_result
PACKAGE SIZE xxxx
FOR ALL ENTRIES in RESULT_PACKAGE
COMP_CODE = RESULT_PACKAGE-COMP_CODE AND
PROFIT_CTR = RESULT_PACKAGE-PROFIT_CTR .
PROCESS your data here
ENDSELECT.
You might also want to discuss the issue with your basis team if there is a way to get more memory if there is no way to do that process.
Hope that helps,
Michael

TSV_TNEW_PAGE_ALLOC_FAILED issue

Similar Messages

Maybe you are looking for