Tungston E2 My calander data disappeare​d from my desktop.

My Calander data has disappeared from my desktop. Hot sync from the handheld does not bring it back.
Contact information remains on desktop as do birthdays on the calander in the no time area at the top of the desktop screen.
I have all my data for my calander on a laptop, can I use my handheld to get that data and then hot sync to the desktop calander to bring the data back to the desktop??
This question was solved.
View Solution.

Maguire1943 wrote:
Actually I have the data on the other laptop now and want to import it to the desktop where it disappeared from. I'll try moving it from the laptop to the desk top using this method. Will the data remain on the Laptop when I copy it to the scan disc. I don't want to lose it from the laptop.
The data will remain.
To make things a bit less worrysome, just make a copy of your entire User account folder before performing the Export.  If using Palm Desktop 4.x, it should be residing in  C:\Program Files\Palm (or PalmOne)\<your HotSync account name truncated>
Copy (not Move) the entire folder elsewhere on the computer.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • Transfering songs from old desktop to laptop

    I just purchased a laptop and had a data transfer done from old desktop to laptop which included my itunes files. I know where the files are located, however when I try to import the songs, I locate the files which are organized by artist and when I click on the open button, nothing happens. Is there a way to transfer songs on my ipod to my itunes account on the laptop, or am I going to have to do it another way. PLease help!!!!

    "Is there a way to transfer songs on my ipod to my itunes account on the laptop"
    You can't sync or drag your non iTMS music back directly from an iPod to iTunes. The transfer of non iTMS content is designed by default to be one way from iTunes to iPod, the transfer of purchased content has recently been introduced with iTunes 7. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes
    If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward. As iTunes 7 is just out some of these may not have caught up with it yet though I haven't experienced any problems with the Mac software I use.
    YamiPod Mac and Windows Versions
    iGadget Windows Only
    iPodCopy Mac and Windows Versions
    iPod Access Mac and Windows Versions
    PodUtil Mac and Windows Versions
    iPodCopy Mac and Windows Versions
    PodPlayer Windows Only
    CopyPod Windows Only
    For more on the new function in iTunes 7 look under under File>"Transfer Purchases from iPod" which transfers iTMS purchases. A paragraph on it has been added to this article: How to use your iPod to move your music to a new computer

  • Data Disappears from Line Chart in Preview Mode

    Help! Line chart data present in design mode, but disappears when in preview mode.  I have a dashboard that I update monthly.  Simple line charts.  Now, the line chart data is visible while in the design view, but does not show up when in the preview view or even when converting it to a PDF or Powerpoint.  SWF issue?  Inputs are needed!
    Thanks,
    Stan

    Hi Stan,
    The answer to, why the data disappears in runtime mode, depends on how you retrieve the data in your dashboard.
    It seems that you have some sample static data in your spreadsheet that shown in design mode. But chances are that this data is set to be overwritten in runtime mode, if you import your data using QAAWS, Live Office or similar.
    I would suggest you to add a "spreadsheet table" component (found in the bottom of the Selectors category in the components browser) to your dashboard. Set the spreadsheet table to display some of the cells in the spreadsheet that you expect to get populated during runtime.
    In this way you can verify if data is actually present in the relevant cells during runtime.
    By the way - this is also a best practice method to test data-retrieval in Xcelsius.
    I hope this helps.
    Kind Regards,
    Simon

  • Data disappeared from iCloud. 18GB worth.

    I recieved a notice that my complimentary iCloud space would expire on October 1, so I went ahead and purchased the space I would need. I got an email today (10/1) Telling me that my 25 gb plan went down to a 5gb free plan even though I already paid. On my computers and iPhone, it still shows 25gb available with only 1.2GB in use. I had about 18GB of backups and photos/documents that are now just gone. I went in to double check if I had purchased the extra space, and indeed I did purchase it. Where did all my data disappear to? Can I trust iCloud to safely keep my data? I lost some pages documents and my iphone backup.

    i have the same problem. paid in August (!)..
    today i have got this message:
    "Your iCloud storage has been automatically adjusted to the free 5 GB plan. You are currently using 5 GB of storage."

  • ITunes was unable to load data class information from Sync Services. Reconnect or try again later.

    Ever since I upgraded to iTunes 10.4 I've been getting this dreaded message on many occasions when I try to sync my iPhone 4 or iPad 2 with my Win 7 64 bit machine. "iTunes was unable to load data class information from Sync Services. Reconnect or try again later." What happens is that local content (music, videos etc) will sync properly to my iPhone, but other content (such as Outlook information, MobileMe stuff, etc) will not.
    I have uninstalled and completely purged all Apple data from my PC (including hidden files and folders under Common Files and in the Registry) and reinstalled iTunes. Yet after one or two syncs, the same problem resurfaces. The other weird part is that the Sync Services crap-out message will happen after I do a successful sync, leave the iPhone connected to the PC, and don't even touch the computer for several hours.
    I've actually developed a very tedious work around that seems to restore syncing if for a short time.
    - Undock/unconnect all Apple devices from the PC.
    - Close iTunes, MobileMe control panel, and Safari (if you have it).
    - Start Task Manager (Ctrl + Alt + Del) and shut down iTunesHelper.exe and SyncServer.exe
    - Open up a Windows Explorer window (like My Computer) and under Tools, Folder Options, View, toggle on Show Hidden Files and toggle off Hide Protected Operating System FIles
    - In WIndows Explorer, navigate to "C:\Users\<your name>\App Data\Roaming\Apple Computer". Rename the folder Sync Services to something else, like Sync Services_Old.
    - In WIndows Explorere, navigate to "C:\Program Files (x86)\Common Files\Apple\Mobile Device Support" and double-click on AppleSyncNotifier.exe.
    - Go back to your Folder Options and turn off SHow Hidden Files and toggle on Hide Protected Operationg System Files
    Now you can start up iTunes again and connect your device. It should sync properly again (at least, until it doesn't once more).
    Does anyone at Apple have any idea about this error or a solution?

    I actually spent a fair amount of time on the phone with a senior Apple tech last week. He directed me to this topic:
    http://support.apple.com/kb/HT1923?viewlocale=en_US
    It's important that you go through the steps EXACTLY as described here and in the proper order. Also make sure MobileMe control panel is uninstalled (if you have it).
    Interestingly, when I went through this procedure and then reinstalled iTunes 10.4 64-bit  (didn't do MobileMe or Safari at this stage, but QT is automatically installed) everything worked perfectly. The aforementioned error messages disappeared and all is working flawlessly, as it should.
    I hope my expereince will help! Give it a try.

  • Downloads folder disappeared from the desktop?

    Hello!
    Mavericks user here. Today I was trying to find the downloads folder, you know the folder where all newly downloaded files end up on the right lower border of the screen, and are beautifully filed with the newest download at the bottom.
    So for some reason I moved the folder to finder, and it disappeared from the desktop. It is not in finder either. When I searched for it on finder I found the folder again, putted it back on the desktop, but now the downloads are ordered alpahabetically when I download a new file, it looks different.
    How do I restore the folder on the desktop in such a way the the newest files come at the bottom?
    Thanks a lot in advance!

    gitarnoob wrote:
    Hello!
    putted it back on the desktop,
    Do you mean in your Dock?
    If so, right-click (CTRL-click) > Sort by > Date Added
    If you mean you actuall moved it to your Desktop or created and alias then open the folder, Click the Arrange icon:
    and select Date Added

  • Calculated field makes data disappear in report

    Hi Gurus,
    I have here unique problem of data disappearance columns included in the report are
    year (time -dim), order number (backlog details - dim) , total backlog (f), rma backlog (f) , shipping backlog (f), hold backlog (f) . All are from same fact table. Now rma , shipping , hold are calculated columns and total backlog is base column.
    Filter : Year = 2009 , Order number = 11111 .
    result of the above report is (without filter)
    2009 ,11111 , 4.0 , 0.0 , 4.0 , 4.0
    When I take out hold_backlog column I get the data
    2009,11111, 4.0 , 0.0 , 4.0
    but when I put the hold_backlog data does not come.
    Now when I move any column excluding total_backlog afer order number then I get the data but it gives 0 to all derived column and in session query points to original column taking out the case statement .
    Second weird thing here is when i put case statement in hold_backlog as { CASE  WHEN  USJ_Analytics."Dim USJ Ord Hold"."Hold Id" IS NOT NULL  THEN USJ_Analytics."Fact USJ Sales Backlog".Shipping_Backlog ELSE 0 END }
    Here automatically not come before after saving.
    { CASE  WHEN  NOT USJ_Analytics."Dim USJ Ord Hold"."Hold Id" IS NULL  THEN USJ_Analytics."Fact USJ Sales Backlog".Shipping_Backlog ELSE 0 END }
    May be there is problem in case statement , could you pls help asap as I think this hold column culprit but dont know how ?

    Amol,
    In the formula for the column causing the error, try adding an IfNull function to put 0 in place of the null, that might work.
    Regards
    Ed

  • Data disappearing on consolidation

    I am using HFM v9.3.1
    I have created a new forecast scenario - periodic load (same as other forecast scenarios) already in the metadata
    I load data into this scenario into an entity fine but when I run the consolidation the data disappears back to zero
    I have checked the new accounts being used and they are all setup as ASSET
    I have loaded security, exchange rates, started process control
    Can't understand why this is happening as hasn't happened for other scenario setups.
    Please advise if you can.

    To add to my further testing:
    I have tried creating the scenario differently and this did not affect the outcome. I believe it must be the way I have created the specific account codes that I want to use in this scenario.
    There are only 26 codes all cashflow related and all rollup into CFF
    - All are setup as ASSET
    - All are IsConsolidated
    - All have Custom1-4 members
    - All have enable C1-4 aggr
    - All have Submission Group 1
    - none IsCalculated
    - none IsICP
    - base codes all have userdefined1 as CFF
    The account setup follows the same as per our standard Balance Sheet hierarchy codes so cannot see what might be causing the data to disappear upon consolidation.
    CFF - Cash Flow Forecast
    CFCASHCL - Closing cash and cash equivalents
    CFCASHOP - Opening cash and cash equivalents
    CFNET - Net increase/(decrease) in cash and cash equivalents
    CFOPCF - Operating cash flow
    CFAEBITDA - Actual/Adjusted EBITDA
    CFEBITDA - Actual EBITDA
    CFADJ - Amendment to EBITDA forecast
    CFOWCREC - Movement in OWC Receivables, Prepay & Inv
    CFOWCPAY - Movement in OWC Payables, Accruals & Prov
    CFICOC - Movement in Intercompany Current
    CFOPAC - Net cash from operating activities
    CFTAX - Taxes Refunded / (Paid)
    CFGROUP - Group Costs
    CFINVAC - Net cash from investing activities
    CFINTREC - Interest Received
    CFDIVREC - Dividends Received
    CFCAPEX - CAPEX
    CFFINAC - Net cash from financing activities
    CFINTPAY - Interest Paid
    CFDIVPAI - Dividends Paid
    CFICONC - New Borrowings / ( Repayments)
    CFPF - Net movements in principal funds
    CFPFREC - Movement in PF Receivables
    CFPFPAY - Movement in PF Payables
    CFOTHER - Other
    Be grateful for further input on the matter.
    Thanks
    LG

  • Input Query Data disappears

    Hi,
       I have created an Aggregate Level on Multiprovider and restricted in the query as follows:
       Currency Key (USD)
       Posting Period (#)
       InfoProvider
       Actual Amt(RKF by Actual Infoprovider) - Read Enabled
       Plan Amt(RKF by Plan Infoprovider) - Plan Enabled
       Input Query starts in change mode
    When I execute the query in Bex Analyzer, I can see data in Actual Amt RKF and enter data in Plan Amt RKF.When I save the data it disappears.For save I am using SAVE_AREA command.Any ideas on what is missing in here.
    Before I can make my selections complex, I wanted to try this simple one.Also, I can't execute this query from query designer ..some problem with basis setting, I hope that isn't the reason.I got this working when I created the input query on real time provider rather than multiprovider.But I want to make it work with multiprovider as I need to show data from actuals and plan.
    Thanks
    RT

    Ravi,
      You tell the system within your RKF by selecting real time infoprovider in addition to the amount.I deleted what I had created earlier to have a clean start.Here are the steps I followed to re-create: (we are working with 0amount, posting period, currency key and infoprovider objects only)
    1.Created 2 restricted key figures (RKF1 - 0amount, actual cube and RKF2 - 0amount, plan cube)
    2. RKF1 planning properties data cannot be changed and RKF2 planning properties data can be changed by user or planning functions.
    3. Created structure in columns and added these two RKF.
    4. Added Posting Period to rows and changed display to key.Acess type to Master data and query execution to char rels.
    5.Added Currency to rows and changed display to No Display.
    6.In the default values, set posting period to 1and set currency key to USD.
    7.Added Infoprovider to free char.
    8.Added both posting period (1) and currency key(usd) to char restrictions.
    9.Opened Bex Analyzer and created the save command.
    10. Executed the query, input the data and data disappears.
    Cheers
    RT

  • Files & Folders disappeared from the desktop!

    I have a number of files and folders that just simply disappeared from my desktop. I have tried all of the "normal" recovery methods (restart, repair permissions, run Disk Warrrior and replace the directory, run Data Rescue II) but I find NOTHING!
    I am totally baffled by this and cannot seem to find anyone who can give me an answer. HELP!
    I was hoping the Apple board would have enough "experts" to help me find my missing data......

    I have exactly the same problem, and I've already asked for some help on this boards but with no luck, and 10.4.9 didn't help, nor did the new bootcamp beta.
    From what I understand this seems to happen only on Intel Macs that uses Bootcamp. When you boot back to OS X after using Windows, your desktop is like a black hole and everything you put in there just seems to disappear.
    If you look for the missing file with Spotlight, it will find it, and if you click on it in the Spotlight window, the file will appear magically on your desktop.
    So basically the files are there but the desktop is just not showing them.

  • CATW data disappear. Anyone can help please?

    Dear all,
    I actually use the standard CATW for the employee to record their overtime. It works fine until last Friday the check entries button in the portal seem like does not work.
    The scenario is where after the employee key in the overtime in the time sheet, they will have to click on the check entries button before saving it. Now the problem is after the employee click on check entries and save the data, the data disappear from the timesheet and no workflow trigger for the employee’s manager to approve the OT.
    Anyone got ideas about this problem?
    Thanks
    Regards,
    Bryan

    I don't think this has anything to do with the java version because Oracle 8.1.6 comes with jre 1.1.8. I believe that the install process sets up its CLASSPATH to use only those jars which come with the distribution.
    Read the other posts on this bboard about installing Oracle on a RedHat 7 platform

  • Pedometer data disappearing into the ether, not into Nike+

    Purchased a new iPod Nano yesterday. Got it home and connected it to my MacBook (running iTunes 9.0).
    It asked me if I wanted to sync the pedometer data to Nike+ and I clicked on Yes.
    It didn't ask me to create a Nike+ account so, having never created a Nike+ account or used the service, I imagined that I could log in with my Apple ID - the same one I used to register my iPod Nano.
    When I visit the Nike+ web site by clicking the link in iTunes it takes me to a page where I have to choose my Country.
    Whenever I connect my iPod Nano it asks if I want to upload my pedometer data to Nike+, the data disappears from my iPod but where does it go?
    How do I tell iTunes which Nike+ account to use? OR, how do I tell Nike+ which iTunes account to use?
    Any help would be appreciated.

    Weird thing is that now when I go into iTunes, and click the Nike + iPod, it shows my Nike account (same as my iTunes one) and syncs up the data. It shows my Login ID under the 'Automatically send workout data to Nike+.
    The button (Visit Nike +) now takes me to the correct web page and shows my progress.
    I am 20% up the 100 story building.
    I think I need a few more days of activity to see what the site can do. It is a really interesting idea.
    I do not know if I sync mid-day, will those steps go to Nike and a sync later that day add the additional steps?
    Also, It seems to easy to delete steps from the Nano. I accidentily delete al my steps from 9/11.
    Now I need to make sure that teh steps the Nano is capturing or pretty close. It seems to go into pause and not track steps once I leave the Pedometer memnu?

  • Demantra forecast disappears intermittently from ASCP.

    Demantra forecast disappears intermittently from ASCP. Need to run Upload local forecast workflow again and then the plan run to view the forecast again, Can anyone tell why is this happening?
    However the forecast entries are not disappearing from the Denorm table.
    Thanks
    Somanath

    if the data is available in denorm table, then some planning program is causing this issue. demantra worflow or forecast publish from demantra works fine.

  • All my GPS data disappeared

    This is something that happened twice.
    Suddenly, all my GPS data disappeared from the entire catalog.
    Fortunately, I could recover them from my catalog backup.
    I can't make out how this could have happened.
    Did anyone experience the same problem ?

    There are two cases
    Case 1 : This happened under LR 5 or even LR 4 a couple of weeks or even months ago. The GPS data got erased everywhere and could not be recovered.
    Case 2 : This happened under LR CC. I was lucky to be aware of that problem because shortly after this loss I tried to find photos for a specific location. But there was no GPS data available. By reloading the apparently uncorrupted catalog everything was fine again.
    What I think happened
    Since all GPS data for the entire catalog disappeared in one instant, I think that the problem lies in my catalog. There must be a file containing a link from the photos the GPS date (or the other way round). I think that link got corrupted or was erased.
    In case 1 unaware of this loss I browsed and accessed the photos thereby gradually erasing the GPS data in the photos until none was left.
    In case 2, since this is an unforeseen event for LR, the GPS data in the photos were not immediately erased. And I did not access the photos. By reloading an uncorrupted catalog everything was fine again.
    Unfortunately I cannot trace what event caused the catalog to get corrupted. All I know is that I was creating and deleting collections.
    Believe me, I now constantly check the presence of GPS data via the metadata filter "GPS data".
    Does this make any sense to you ?

  • Data disappears when a field is added to report

    I have a report that uses two files. The first one has a field called "amount code", and the second includes that code field as well as a description of the code.
    But when I link that second file to the first one, data disappears when I drag a field from the second file into the report. The first 10 fields in the report are from the first file, and they look fine. But as soon as I drag in any of the fields from the second file, all of the data in the report disappears. (This happens no matter where I drag that field to...data, page headers, etc.)
    I'm pretty sure I have the files linked correctly. Can anyone tell my why this happens?
    (When I use the either file by itself, things look fine.)
    Thanks, Jon

    Hi Raghavendra,
    I think I have it figured out (or more accurately, our DBA figured it out for me).
    The problem is that in the main file, the code field is only one digit long (string). But in the second file (the code description file), that code field is 8 digits long, even though only the first digit has any data (followed by 7 blanks). Therefor CR doesn't see any matches.
    It looks like the solution is to truncate the field in the code description file so it's only one digit long instead of 8.
    But thanks for the help...I'm clearly over my head, and very much appreciate your assistance.
    Jon

Maybe you are looking for