Tuning parameter to cater number of users
Hi Folks,
I am in a set up of the new database where i need to set the tuning parameter to cater/serve 2000 concurrent users.
what could be the tuning parameter's that i need to setup .
database connection pool size = ?
max process= ?
also do we need to have a down time for this operation?
any suggestion is highly apprciated .
we have oracle 11g database on linux environment .
Thanks in advance .
Edited by: 790072 on 15/05/2012 18:53
790072 wrote:
Hi Thanks for the quick reply ,
what could be the configuration parameters for this ?
say for example if i give the parameter
max process= 2000
and database connection pool size = 2000
will this going to serve 2000 concurrent users?What about background server session?
What about application batch jobs?
It appears you have little real world experience with connection pooling & OLTP environments.
While there might be 2000 "concurrent" users, there rarely or NEVER will be 2000 concurrent SQL.
Most of the time while a user is in front of a keyboard, the session & keyboard are 100% IDLE!
Similar Messages
-
What is parameter for total number of user sessions for entire SAP system
Is there a profile parameter that limits total number of SAP user connections to that system. Im not talking about rdsip/max_alt_modes that limits number of sessions for particular user but a parameter that limits user connections to total number of users logging into particular system. I heard tht there is parameter that has default value 90, i want to change it but dont know whats the paramter name..plzz help me in this regard to proceed further.
Thank youHi,
Use ST03/ST03N to check the number of users logged in.
Use RZ10 to change the parameters
Rakesh -
[database design] the "too many" number of users of one instance!!
Good morning everyone!!
I have a question about the number of users of one db
instance, "possible problems" caused by too many users,
and "pros and cons" of this case.
Now, the company I work for is considering centralizing
150 db servers of 150 sites. 150 chained-stores have
their own db instance.
Here is the structure of db instance after the
centralization.
1. Centralized instance has each user per site(150
sites), for example, site001, site002, …site00n, …
site150
2. Each user has its own 250 tables, thus the db
instance become to have 150 users and 150*250 tables.
3. Each user has almost the same table schema, not
exactly. There are a little bit of differences among
the business rules of each sites.
4. the version of centralized db instance is "oracle9i".
Theoretically, it seems like there is no problem, but I
have not experienced the db instance like this, which
has "too many" users of 150 users.
In terms of every aspect such as "performance/tuning",
"system management", or "something else", I would like
to hear what could be "the pros and cons" of this
structure.
Assuming that there are possible critical problems caused
by too many users, what could be the alternative choice?
I will be waiting to hear your experience. Every response
will be appreciated, even if it is not about what I asked.
Thanks for your interest in advance.
Have a nice day.
Ho from JapanHave a look to following AskTom threads:
http://asktom.oracle.com/pls/ask/f?p=4950:8:4685256847630125933::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:31263903816550
http://asktom.oracle.com/pls/ask/f?p=4950:8:4685256847630125933::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:63447102315094 -
Hi
I run a data mart application on Win2k3 dual processor Dell Server on Oracle 10g R1. 8 GB Physical RAM 1.7 GB for the SGA and 1.5 GB for the PGA. How many users can be connected concurrently to do a performance testing ? Roughly an user would have around 2 MB of data fetched for his query.
Will it help to move to a Sun Solaris 64 bit machine with 8 GB RAM for a larger SGA and PGA to increase the number of concurrent users ? What parameter affects the number of concurrent users ?
Thanks
Dev.No one is going to be able to tell you how many users your particular system can support. There is exactly one way to determine this, by doing a load test. Schema design, the presence of appropriate materialized views, the nature of the queries, data volumes, initialization parameters, system bottlenecks, timing requirements etc. will all come into play and none of us knows your system as well as you do. You would have to set up an appropriate test that simulated the type of users you expect on the type of data volume you expect to see.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
Estimating number of users per instance
hi gurus,
This is a simple but critical question for me. How to estimate number of users per instance.
example if database size is 1.2 terrabytes then how many users can we have? and how can we know the num of users for a exixting instance?
ReddyHi Reddy,
Basically it is sizing question, and it depends on the hardware you have, the performance level you expect, and how well the system is tuned...
Transaction ST07 shows how many users are currently on the system.
Thank you,
Victor -
Measure the number of user connected to an Application
Hi,
How can I find the number of users connected to a weblogic application
Can you help me understand how can I measure this parameter for a monitoring purpose?
Thanks in advance,
Nicola AtticoCurrent Sessions is the current total number of open sessions for each application. Yes, you can use JMX or WLST within a script.
The WebAppComponentRuntimeMBean mbean of your application provides this information through OpenSessionsCurrentCount attribute.
For instance, in WLST enter:
wls:/my_domain/serverRuntime/ApplicationRuntimes/my_application/ComponentRuntimes/my_app> cmo.getOpenSessionsCurrentCount()
For JMX I suggest to you see [http://download.oracle.com/docs/cd/E13222_01/wls/docs91/wlsmbeanref/core/index.html]
Edited by: Betino on 22/10/2009 11:26 AM -
" QUERY REGARDING NUMBER OF USER'S "
Hai,
What is the Upper Limit for the Number of User's in a SAP system???
Ex : IF a User is created , how many (N number of user's can use the same SAP system???Hai
Ashok,
I don't know exact answer for ur question.
By using rdisp/tm_max_no parameter , we can restrict the no of users per instance.
The max. no of users allowed here is 10000.
You can thus restrict how many users can log onto an instance simultaneously.
You can see which users are logged on in the User Overview (transaction SM04).
if it useful, reward points.
Thank you,
G.V.K.Prasad -
I have bought used I phone 4s. I cloud fails to accept my apple ID, which is accepted by apple store and I tuned.
It says that I have already used maximum number of user accounts. Kindly help to resolve this problem.Hello Renvin29,
It sounds like you need to disable your iPhone remotely. I'm sorry to hear about your phone! The only way to do this with is Apple services is if you had Find my iPhone enabled. You have 2 options:
You can use this article to put the phone into Lost Mode and preserve your data on it, but prevent access to it:
iCloud: Use Lost Mode
http://support.apple.com/kb/PH2700
Or you can just erase it remotely outright:
iCloud: Erase your device
http://support.apple.com/kb/PH2701
You should also take a look at this article for additional info on what to do about this situation:
If your iPhone, iPad, or iPod touch is lost or stolen
http://support.apple.com/kb/HT5668
Thank you for using Apple Support Communities.
Take care,
Sterling -
Is there a way to monitor the maximum number of user connections from Solution Manager?
Hi Ashwin,
By "monitoring" if you mean the checking the configured part, following is the navigation
SOLMAN-->DBACOCKPIT-->Configuration-->Server configuration-->Memory Use-->number of user connections
If you are looking for "dynamic" usage of this parameter,
using DB02-->Performance -->Dash board-->Connections
will give you information of active, free and reuse count values.
Also,sp_monitorconfig "number of user connections"
will give you same results using isql.
HTH
Rajesh -
How to find the number of users connected to database from OS level(Linux)
Hi All,
Could anyone know , how to find the number of users connected to database without connecting with sql*plus
is there any command to find it?
example we have 10 databases in one server, how to find the number of users connected to particular database without connecting to database(v$session)?
oracle version:- 10g,11g
Operating System:- OEL4/OEL5/AIX/Solaris
any help will be appreciated.
Thanks in advance.
Thank you.
Regards,
Rajesh.Excellent.
Tested, works as long as you set the ORACLE_SID first ( to change databases )
ps -ef | grep $ORACLE_SID | grep "LOCAL=NO" | awk '{print $2}' | wc -l
Thanks!
select OSUSER
from V$SESSION
where AUDSID = SYS_CONTEXT('userenv','sessionid')
and rownum=1;Best Regards
mseberg -
How to find maximum number of users we can assign for Hyperion Planning.
HI,
How to find maximum number of users we can assign for Hyperion Planning.i.e., how to find license limit in hyperion planning 11.1.2.1.
In Essbase propreties, the system is showing maximum planning users could be 65535.
what would be the number for concurrent scenario?
Thanks
Giri
Edited by: Giriprasad on Jun 18, 2012 2:18 AMThe number of users would be based on your license agreement with Oracle, the system is not aware of your license agreement so it is up to you to stick to it.
Cheers
John
http://john-goodwin.blogspot.com/ -
How do I find the number of users logged on another server?
I'm trying to ping other servers and find the number of users logged on that server. Any leads?
Do you need maybe something like this?
FINGER(1) UNIX Reference Manual
NAME
finger - user information lookup program
SYNOPSIS
finger [-lmMspho] [user ...] [user@host ...]
DESCRIPTION
The finger utility displays information about the system users. -
How do I find the number of users returned by a cfldap query?
How do I find the number of users returned by a cfldap query?
I'm not allowed to do something like:
<cfif ArrayLen(results.rows) gt 1>
I then get an error:
faultCode:Server.Processing faultString:'Unable to invoke CFC - Object of type class coldfusion.tagext.net.LdapResultTable cannot be used as an array' faultDetail:''
Many thanks for any light you can shedCheers again Ian for your many helps,
it now won't let me do
<cfqueryparam value="#results.USNCreated#" cfsqltype="cf_sql_varchar">
I get the message:
faultCode:Server.Processing faultString:'Unable to invoke CFC - Error Executing Database Query.' faultDetail:'[Macromedia][SQLServer JDBC Driver][SQLServer]The name "results.USNCreated" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.' -
How to find out total of number of users accessing Hyperion Planning applications ?
Hi All,
Could someone help me with the details of how to find out total number of users who are accessing Hyperion Planning application in Env.?
This is with regard to licenses so wanted accurate and unique information,
Thanks
AmithHello Amith,
I think you should have a look at the blog of Cameron Lackpour http://camerons-blog-for-essbase-hackers.blogspot.be/
In the "Shared Services Stupid Trick" blogs, he shows how to find the real access to an application. The side benefit is that it is amusing to read.
In how far this is OK for the licenses is written on another page. You likely need to use the same method as Oracle does. Ask the Salesperson how to do this. (I am curious what his/her reply is).
Regards,
Philip Hulsebosch. -
How to find out number of users in an organization?
Can you show me how I can find the total number of users in an organization please? Paging through is not an optimal way since there are alot of users.
DamonL wrote:
(be careful if you have a lot though!)That's an understatement. :) If you have a LOT of users in your organization doing a search on the organization just to find the user count will bog down the IDM server for several minutes.
Maybe you are looking for
-
Can I airplay a movie from safari on my MacBook to Apple TV and still use the computer for something else at the same time?
-
Bridge CS3 not writing metadata to JPEG files
For the last couple of months (without my noticing until a couple days ago) all JPEG files that I have edited using Bridge CS3 (on Windows XP) do not have the metadata built into the file. Here are the symptoms: use "File Info" to edit the metadata f
-
GRC 10.1 - GRAC_BATCH_RA( Job packages are failing with error)
Hi experts, We have GRC10.1 with SP06. The problem we have s with transaction GRAC_BATCH_RA. We are running batch risk analysis in order to be able to use the offline risk analysis. But each time we run the analysis some users are left out and not be
-
How to crop selected area?
Is it possible to crop the selected area of a page, because now if i go to Tools>Pages>Crop it can only crop the area that is outside the selected area? Thanks!
-
Migration weblogic portal 4.0 to weblogic portal 8.1
I am trying to migrate weblogic portal 4.0 to weblogic portal 8.1. I need help how to do this ? thanks