Turn Off Debugging in Flex Builder

Forgive me if this is a stupid question... I'm using Flex
Builder 2.0.1 and everytime I build my project it creates the
*debug.swf files. I even have the "-debug=false " option specified
in the "Additional Compiler Arguments"... I also notice that it
seems that my project is being compiled twice (?!) because when I
have coding errors the same error is displayed twice.
I'm trying the really optimize the speed of the build process
and am sure that by preventing Flex from creating the debug files
will chop off at least a few seconds.
Thank you!

Similar Messages

Does turning off debugging help a compiled .exe file run faster?

I'm trying to get my application to run faster. I saw on this website that turning off the debugger makes the application run faster but it's unclear if that applies to the development platform or a compiled executable.

You are probably referring to this KB article: General Performance Improvements. When you create a stand-alone application you can also enable debugging. This will save the block diagrams so you can debug the application while it's running. Normally when you build an app the block diagrams is stripped.
The amount of impact that turning off debugging will have to your VI/app performance is hard to say. To best way to get a VI/app to run faster is to improve the code in the first place. This means avoiding very large memory arrays, not initializing and closing references every time you iterate in a loop, minimizing file I/O, etc. If you provide some idea of what your code does, and can perhaps post your code, specific suggestions can be provided.

Can't Turn off debugging in SharePoint 2013 ULS!

I have started a thread in another user forum here: http://sharepoint.stackexchange.com/questions/101773/how-to-determine-if-sharepoint-is-in-debug-mode
Essentially I have followed the steps outlined here http://msdn.microsoft.com/en-us/library/ee231550.aspx to turn off debug output in the ULS. I have checked each web.config
in each webapp of the farm, on each server in the farm, to ensure that callstack=false, customErrors mode=On and that compilation debug=false. I have performed IISReset and server restarts.
I see many messages in ULS that either have DEBUG within the message or "Write Debug Scope Start event..." and "Write Debug Scope End event..."
Do I need to perform some special 'redeployment' from within VS12? I would think an IISReset would do the trick after changing the web.config ?

http://technet.microsoft.com/en-us/library/ee748656%28v=office.15%29.aspx#section2
In Central Administration, on the home page, click Monitoring.
On the Monitoring page, in the Reporting section, click
Configure diagnostic logging.
On the Diagnostic Logging page, in the Event Throttling section, configure event throttling as follows:
To configure event throttling for all categories:
Select the All Categories check box.
Select the event log level from the Least critical event to report to the event log list.
Select the trace log level from the Least critical event to report to the trace log list.
To configure event throttling for one or more categories:
Select the check boxes of the categories that you want.
Select the event log level from the Least critical event to report to the event log list.
Select the trace log level from the Least critical event to report to the trace log list.
To configure event throttling for one or more subcategories (you can expand one or more categories and select any subcategory):
Click the plus (+) next to the category to expand the category.
Select the check box of the subcategory.
Select the event log level from the Least critical event to report to the event log list.
Select the trace log level from the Least critical event to report to the trace log list.
To return event throttling for all categories to default settings:
Select the All Categories check box.
Select Reset to default from the Least critical event to report to the event log list.
Select Reset to default from the Least critical event to report to the trace log list.
In the Event Log Flood Protection section, select the
Enable Event Log Flood Protection check box.
In the Trace Log section, in the Path box, type the path of the folder to which you want logs to be written.
In the Number of days to store log files box, type the number of days (1-366) that you want logs to be kept. After this time, logs will automatically be deleted.
To restrict the disk space that logs can use, select the Restrict Trace Log disk space usage check box, and then type the number gigabytes (GB) you want to restrict log files to. When logs reach this value, older logs will automatically
be deleted.
After you have made the changes that you want on the Diagnostic Logging page, click
OK.
YOu will have to restart the sharepoint tracing service on all servers
http://www.mssharepointtips.com/tip.asp?id=1130
http://blogs.msdn.com/b/mossbiz/archive/2011/07/29/the-quot-right-quot-diagnostic-log-uls-settings.aspx
http://technet.microsoft.com/en-us/library/ee748619%28v=office.14%29.aspx

Turn off Debugging within a script

Hi everyone,
I have a script which does a big batch daily job - however if
debugging is active on the server it manages to bring the server
down as it just takes too long. However as there is a big team of
developers here from time to time people need debugging on I have
found that the script does not complete because there is too much
over head with debugging.
I have tried turning off the debugging output but this doesnt
work. It still seems to generate the debugging over head but does
not display it.
I am sure this is possible but havent found a result yet.
Any help is appreciate
Thanks

The problem is that this job will be run from a paticular
server and Debugging is required for other jobs on the same server
so this is not possible

How to turn off DEBUG message in Jdeveloper 9.0.3

Folks,
When I upgraded my Jdeveloper from 9.0.3 Preview version to formal release, it takes 5 minutes to load the first jsp page which used to take less than 1 minute. One reason I can think of is that all the DEBUG messages are showing up now and printing out those messages could take minutes. I can not find the way to turn off those DEBUG message. Please help.
Thanks,
Yibing

There should be no diagnostic messages from BC4J by default.
Adding the Java VM parameter -Djbo.debugoutput=console sets the jbo.debugoutput system property to the value console and makes the messages appear.
Double-check that you don't have this set in your "Runner" panel.

Z87M Gaming - Turn Off Debug LED?

Hello there. This is my first MSI board and I primarily got this for the Red & Black theme I am going for. I noticed the LED Debug output before I bought the board but just assumed that I would be able to turn this feature off. I am on the latest BIOS and I have combed through that thing so many times but I am not seeing the option to turn this feature off? I'd hate to return the board because of it but more importantly I don't feel I can bring myself to put tape over it.
Thoughts?

You can;t turn the debug led off. This is because it is important messager towards the user in case something fails.

How to turn off "DEBUG SOURCE=cs Setting status to 304 for file=" in access.log

I see this entry in the log file every few seconds. How can I turn this OFF? I
can set the EnableLogfile to false but then I don't get any logs. We are running
WLS 5.1.
Regards,
Pat.

Pat:
I dont see this string appearing anywhere in the src in any version of th
510 line (all Sp's included).
What version of 5.1? i.e. what SP?
Are you using extended log format? Did a developer write a custom elf logger
package?
What are the ELF headers at the top of the access.log?
Cheers
mbg
"Pat" <[email protected]> wrote in message
news:[email protected]..
>
I see this entry in the log file every few seconds. How can I turn thisOFF? I
can set the EnableLogfile to false but then I don't get any logs. We arerunning
WLS 5.1.
Regards,
Pat.

Turning off NTLM for App Builder

I am using the NTLM authentication as described in http://htmldb.oracle.com/pls/otn/f?p=18326:44:::::P44_ID:1722
This works fine, but I realized that it works at a DAD level, because my dads.conf now has
LoadModule ntlm_module libexec/mod_ntlm.so
<Location /pls/htmldb>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDatabasePassword htmldb123
PlsqlDatabaseConnectString myconnectstring
PlsqlDefaultPage htmldb
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_manager.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage american_america.al32utf8
AuthType NTLM
AuthName "NTLM authentication"
NTLMAuth On
NTLMAuthoritative On
NTLMBasicAuth On
NTLMDomain mydomain
NTLMBackup mypdc
NTLMServer mybackuppdc
require valid-user
</Location>So, in effect, even during development, every page view in HTML DB Application Builder also talks to my domain PDC to get my domain id and stuff.
This is unnecessary, I need all that NTLM stuff only when running my applications, not when running HTML DB pages itself.
Any ideas?
Thanks

I am seeing that sometimes pages take a long time to load or even timeout (404 or some other errors) when I am working in the App Builder environment.
This used to be fine before, so I started to take a look at my Apache logs and saw some NTLM/SMB related timeouts when Apache was fetching information from my domain server.
Strictly speaking, I don't need NTLM authentication when I am using the Application Builder, only my apps need it (my page sentry uses it), so I thought it might be prudent to reduce this "unnecessary load" on my domain server/network.
Thanks.

How to use Flex builder with blazeds and JBoss

Following the instructions it is pretty easy to set up a project to work with the turnkey tomcat. However, I am having problems with JBoss because the app has to be deployed as a .war file. I can create a war file manually and depoly it no problem. How do I get flex builder to deploy to a war file? I want to be able to debug in flex builder and run at the click of a button.

Hi, I am trying to configure BlazeDS with JBOSS Application Server. I have downloaded BlazeDS binary version - blazeds_bin_3-0-0-544.zip from Adobe. But in the installation steps, it says that copy blazeds.war, samples.war and console.war into <JBOSS_HOME>/server/default/deploy folder. But in this zip, it contains only blazeds.war file only. I have copied it to <JBOSS_HOME>/server/default/deploy folder. I have restarted JBoss. I didn't get any error. But when i give http://localhost:8080/blazeds ... i am always getting "Page not found 404" error. Please help me, if you have detailed steps to configure BlazeDS on JBoss. Thanks for your time.

BlazeDS locking $ProjectName-debug folder and not allowing flex builder to build project

Hi all,
Im new to Flex. I'm trying to setup my development environment. What I've noticed is that when blazeds is started and I run a flex project, it creates a folder in the blazeds root folder named $ProjectName-debug (replace $ProjectName with the actual project name). Once this folder is created, and the flash page is accessed, it cannot be deleted until blazeds is actually stopped. The files on that folder seem to be locked. While this folder is locked, eclipse cannot seem to re-build the project (specifically clean). Thus every small change I make to the project, I'm currently having to stop blazeds, clean the flex project, start blazeds, run the flex project.What makes things worse is that I have to start our application along with blazeds so it can retrieve the data from the app (which takes a few minutes).
I'm wondering if other people are having to go through this pain or if they've figured out a way to get around this. I would ideally like to have a way where I'm able to rebuild the project and hit f5 and reload the page and see the changes. I understand this is not possible with debug.
If anyone has figured out a way to incorporate blazeds to their development environment in a more practical way, please let me know. We just switched from tapestry/gwt to flex. We used to be able to update on the go thus development was much simpler.
Regards,
Udam

if you see a red error in your "problems" tab inside
flexbuilder, your project most likely will not be built fully, or
correctly, in that case running that project does not makes sense
at all, you need to make sure "problems" tab is clear of errors
(you might see warnings, but they are not very harmful) .if ther is
no errors, hitting ctrl+B builds the project and choosing Project
--> Clean ... clears output folder and rebuilds the project P.S
Unless you uncheck checkbox that says "automatically build project
after clean".
IMHO, turn off Auto Build and manualy build the project that
will take care of most issues, plus use (project --> clean) when
you need to make sure you have latest build .
Kind Regards
Levan.

Flex Builder 3 Beta 3 Debugging not working with latest Flash Player Debug

First to emphasize that never had such issues with Flex
Builder 2 Beta 2 and Flash Player 9.0.47 Debug version.
I downloaded Flex Builder 3 Beta 3 and installed it. Then
trying to debug any Flex app (old or newly created) does not work.
I don’t get any errors, but after some research I saw
it’s nagging up on trying to connect to the Flash Player
debug version.
1. Uninstalled old versions of Flash Player (FP).
2. Downloaded latest debug version of FP 9 (9.0.115) and
installed it both for IE and Opera (Netscape-compatible).
3. Installed Flex Builder 3 Beta 3.
4. Created a simple Flex app.
5. Ran it in debug mode.
6. Showed a small window with title “Progress
Information” and a progress + text: Waiting for Flash Player
to connect to debugger…
7. Two minutes later I got the error: “Failed to
connect; session timed out. Ensure that: 1. You compiled your Flash
application with debugging on. 2. You are running the debugger
version of Flash Player.”
Any idea what is wrong? I tried to download an older debug
version but then FB 3 Beta 3 raises the error it’s expecting
version 9.0.115. I searched to download FB3 Beta 2 (because I
deleted it after downloading Beta 3) but unfortunately Adobe did
their best to wipe it out from their links.
Any help is welcome.
System Specs:
Windows Vista Ultimate
Flex Builder 3 Beta 3 Standalone
JRE 1.6 Update 3
-Dimitar

Hi Dimitar,
Did you close all the browsers (and applications which use
Flash Player) when you install Flex Builder 3 Beta 3 or Flash
Player? You can try manually installing it from <FB install
location>/player/ directory. Here're some
installation/unintallation instructions of Flash Player:
http://labs.adobe.com/wiki/index.php/Flex_3:Release_Notes#Installing_Flex_SDK_3_Beta_3
thanks,
Sharon

Debug Java in Flex Builder?

hi, i installed WTP in Flex Builder, then i set up a project that launches Tomcat, but when i get a display of the .swf file i've created in my Flex project i either get a blank screen, or part of my code is displayed in the page, no actual flex stuff. Does anyone know of any OBVIOUS gotchas that i might be overlooking that will enable me to debug the POJOS i'm using through BlazeDS using Flex Builder? i would appreciate ANY help! thanks!

您好!
我来自中国,姓:龙,QQ:331828177
我英语不是很懂,只能大概知道说的是flex配置问题.我也正学习java和as3希望有您的帮助.谢谢!

Pass query string in Flex Builder debug?

Hi,
I'm trying to figure out how to launch a debug session while passing query strings in Flex Builder. If I open up the Debug dialog, and uncheck "Use Defaults" and attempt to add my query string to the Debug Path text field, Flex Builder states that "The file cannot be found to launch". How do I pass a query string to debug in a SWF with Flex Builder?
Thank you.

If I understood your question correctly.
go to html-template/index.template.html and add the query string there and everything you run the app the query string should be there.
Hope this helps,
BaBo,

Embedded OC4J Server - Turn off BC4J debugging

Hi all,
I am just switching over from Eclipse(Rational RAD) to JDeveloper and using BC4J. I am struggling a bit with the embedded server under 10.1.2. The console messages roll off the top. Argh.. I want to shut down as much unnecessary logging as possible. BC4J put MANY messages out there. I see a reference to adding -Djbo.debugoutput to the start command in order to turn off the debugging messages. I cannot find where the embedded server is started. It is NOT started from C:\jdev1012\jdev\bin\start-oc4j.bat. Can anyone help with this?
Thanks,
--Amy Smith

Only reason for 10.1.2 is that I just joined the company 6 weeks ago and they had not upgraded to 10.1.3. I very much want to do that but was left with some work that was overdue and can't take the time right now as I understand there are some differences that may make migration difficult...
Sigh ... I am missing IDE functionality from Eclipse that is in 10.1.3.
...Thanks for the help
---Amy

Raid building tip - Turn off Windows "Automatic update"

If you are running Windows and are in the software configuration setup stage of creating your raid, make sure you have windows update NOT set to automatic.
Otherwise during your long raid building stage (in my case it took almost an entire day when I configured my raid back in June) Windows could download an update and automatically install it and keep warning you that it will reboot in "so many " minutes unless you tell it to delay rebooting. As you know, it will keep bugging your that it about to reboot over and over again.
Fortunately I have automatic updates turned OFF on my editing machine so I have no surprise rebooting.
Since automatic update can be complety silent, you might go to bed expecting to see your raid finished in the morning, only to be surprised to find that your computer rebooted sometime during the night -- and your raid not completed.
Rowby

Raid rebuilding will continue after a reboot. Restarting the system will not stop a rebuild from continuing.
Eric

Turn Off Debugging in Flex Builder

Similar Messages

Maybe you are looking for