Turning XML/XSLT files into a working Web Template

I've scoured these and other forums for this small piece of information, so I apologize if it's been answered already, but I can't find it.
I understand that the web templates in Lightroom are done in XML/XSLT, with the XML file named galleryMaker.xml and the XSLT file named transformer.xslt. However, I cannot figure out how to get these files to show up as a template in Lightroom.
I am on a Windows XP machine, and all the templates show up in Application Data/Lightroom/Web Templates, but they are all of the type *.lrtemplate. Is there a way to convert the XML/XSLT set of files into an lrtemplate file? Or is there something else I'm supposed to do?

Splatt42 wrote:
I have an executable binary program (that runs just fine on it's own) that I needed to turn into a service (call it "foo"). I did so using the .xml file below, and it does indeed start up at boot, runs in the background,When you run your program (/usr/bin/foo), does it daemonize itself (kind of like running /usr/sbin/sshd), or would you have to do it yourself if run from the shell ('/usr/bin/foo &')?
and does everything it should. I've noticed a couple of problems, though. If I execute an init 0, the system hangs and never gets to the OK prompt. If I disable my service, an init 0 completes without any problems. An init 5 works OK, as does a shutdown from the desktop. I'm not sure what could be causing this. I thought maybe because the service was restarted over and over again...?
I gave my service a timeout value of "0", as I found that when I gave it any other value the service stopped running when the timeout expired. A seeming side effect is that my service is never listed as running, as it's start method (itself) hasn't yet completed.The manifest doesn't really want your binary as the start method. It wants to run something that starts the service, and will exit with status 0 if the startup was successful, and non-zero if the startup was unsuccessful. So you might want to write a small wrapper script (like an init.d startup script).
Take a look at the sshd.xml manifest. It doesn't start sshd, it runs '/lib/svc/method/sshd start', which is responsible for starting sshd.
Darren

Similar Messages

  • How can i turn a photoshop file into a website with knowing code? can i upload Muse or DreamWeaver?

    How can i turn a photoshop file into a website with knowing code? can i upload Muse or DreamWeaver?
    I created a few images (pages for a site) on photoshop and want to turn them into HTML code for a website- Can i Just upload the file into one of these programs and make a file with the correct code imediatly?
    I was reading about using EDGE Reform but i did not understand if i can create the code with it, in the end it says it still needs to be sent to website developer after?

    You need to look at Dreamweaver as a code editor. You need to learn to create good, clean HTML code with style sheets to make websites with Dreamweaver.
    There are tutorials that will take you from a layered .PSD file to HTML. Here's a good one:
    http://net.tutsplus.com/tutorials/site-builds/from-psd-to-html-building-a-set-of-website-d esigns-step-by-step/
    Adobe's Muse is a semi-WYSIWYG website layout creator for small websites (1-5 pages). But there is no way you can go from a .PDS file to Muse, you have to start the site in Muse.
    I have seen a few Muse sites and they're OK, but there is some code that Muse creates that is kind of odd. If you want a good, clean website that will work for you or your business, Dreamweaver is the best choice. Alternatively, you could hire a pro.
    -Mark

  • How to convert xslt file into string

    i'm writting a java program to use xslt to transform the xml file. i'm encountering the problem when i try to convert the xslt file into string. i've defined my utility class called 'XmlUtil' to carry out the operation of transform xml file through xslt. but in my main java program i need to convert both xml and xslt file into a string in order to input them in my function argument. my function argument is as follows:
    String htmlString = XmlUtil.applyXsltString(xmlContent, xsltString);
    i've already converted xmlcontent into string by using:
    xmlContent = xmlContentBuffer.toString();
    but i don't know how to convert 'xsltString' now ? i've searched the google for an hour but i cannot find the solution. anyone can help ?
    detail of my souce code is as follow:
    import java.io.*;
    import java.net.*;
    import java.lang.*;
    import java.io.StringReader;
    import java.lang.reflect.Array;
    import java.util.Properties;
    import javax.xml.parsers.DocumentBuilder;
    import javax.xml.parsers.DocumentBuilderFactory;
    import javax.xml.transform.TransformerFactory;
    import javax.xml.transform.sax.SAXResult;
    import javax.xml.transform.sax.SAXSource;
    import javax.xml.transform.sax.SAXTransformerFactory;
    import javax.xml.transform.sax.TransformerHandler;
    import javax.xml.transform.stream.StreamSource;
    import org.apache.xml.serializer.OutputPropertiesFactory;
    import org.apache.xml.serializer.Serializer;
    import org.apache.xml.serializer.SerializerFactory;
    import org.w3c.dom.Document;
    import org.w3c.dom.Node;
    import org.w3c.dom.NodeList;
    import org.xml.sax.InputSource;
    import org.xml.sax.XMLReader;
    import org.xml.sax.helpers.XMLReaderFactory;
    import XmlUtil;
    public class FileDownload {
    public static void download(String address, String localFileName){
    OutputStream out = null;
    URLConnection conn = null;
    InputStream in = null;
    StringBuffer xmlContentBuffer = new StringBuffer();
    String temp = new String();
    String xmlContent;
    try {
    URL url = new URL(address);
    out = new BufferedOutputStream(
    new FileOutputStream(localFileName));
    conn = url.openConnection();
    in = conn.getInputStream();
    byte[] buffer = new byte[1024];
    int numRead;
    long numWritten = 0;
    System.out.println (in.toString ());
    while ((numRead = in.read(buffer)) != -1) {
    out.write(buffer, 0, numRead);
    numWritten += numRead;
    temp = new String(buffer);
    xmlContentBuffer.append(temp);
    System.out.println(localFileName + "\t" + numWritten);
    xmlContent = xmlContentBuffer.toString();
    String htmlString = XmlUtil.applyXsltString(xmlContent, xsltString);
    } catch (Exception exception) {
    exception.printStackTrace();
    } finally {
    try {
    if (in != null) {
    in.close();
    if (out != null) {
    out.close();
    } catch (IOException ioe) {
    public static void download(String address) {
    int lastSlashIndex = address.lastIndexOf('/');
    if (lastSlashIndex >= 0 &&
    lastSlashIndex < address.length() - 1) {
    download(address, address.substring(lastSlashIndex + 1));
    } else {
    System.err.println("Could not figure out local file name for " + address);
    public static void main(String[] args) {
    for (int i = 0; i < args.length; i++) {
    download(args);
    }

    I don't understand why you need load the XML and XLS files into a String. A Transformer can be constructed from a Source and there is a StreamSouce which can be constructed from an InputStream. The transform() method can take a Source as input and can produce a Result. There is no need to go near a String representation of either the input.

  • How can I turn garage band files into mp3s?

    On my older Macbook i have always been able to easily turn my .band files into mp3s under the Advanced heading in itunes, but with my Macbook Pro, that is not an option. The option has become "Create AAC version". How can I turn my .band files into mp3s so that I can load them onto my web page and my students can pick them up as mp3s and put them on their devices?

    The option has become "Create AAC version".
    Your iTunes importing preferences are currently set to AAC. If you change your Importing preferences to mp3, the option should then become "Create mp3 version". See the following document for some more details:
    iTunes: How to convert a song to a different file format

  • Is there a way for mac to turn a voice file into text?

    is there a way for mac to turn a voice file into text?

    Mt Lion has dictation. I've had some luck using that and my iPhone voice memo program transcribing. It works best when the memo's are a minute or less and obviously there's editing to do afterwards.

  • How do yo turn a pdf file into reader so i can edit the form?

    how do yo turn a pdf file into reader so i can edit the form?

    I have no idea what you are trying to say; your are trying to open a PDF with Reader?

  • How to merge five different xml input files into three output files

    Hi All,
    Can you please explain me to merge 5 different xml input files into 3 output xml files.
    I'm looking forward for ur suggestions...
    Thanks
    Pullarao

    HI
    Please see the below links
    /people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
    http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
    Many other examples can be found under the following link at help.sap.com
    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
    And some weblogs
    https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
    /people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
    /people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    /people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
    /people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
    /people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
    /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
    /people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
    Also have a look at these seminars,
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
    <b>BPM CollectPattern..</b>
    http://help.sap.com/saphelp_nw2004s/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm
    Thanks !
    Regards
    Abhishek Agrahari
    Questions are welcome here!!
    <b>Also mark helpful answers by rewarding points </b>

  • Turning my PDF file into a Template

    Hey guys, just wondering how to turn my PDF file into a template, the PDF is a fillable form, with fields and scripts, is it possible to turn this into a template so when i click on it, it opens up a copy of the original file so we can fill it out and save it somewhere else and keep the original file where it was and un-filled (template)?
    If i have to do this on LiveCycle or another program, let me know.
    Thank you.

    Thanks for replying, but i need my Technicians to be able to fill out the form, sign it, and save it, and still have the original document sitting there for next time we need to fill it out. The document needs to stay PDF.

  • Photoshop cc is turning my raw files into jpg after editing

    photoshop is turning my raw files into jpg after editing with out flatten the layers instead of psd files. when I go to save they are jpg. This started 2 days ago - no problems before that

    How are you doing the save?  Just choosing File - Save?
    Photoshop remembers the last "master file" format you saved something in.  If the current document is capable of being saved in that format, it will default to that format for the next save.
    What happens if you do the following:
    1.  Open your raw file, and edit it.
    2.  File - Save As, and in the Save as type field choose Photoshop (*.PSD;*.PDD).
    3.  Complete the save operation.
    I'm betting that will result in your having saved a PSD format file.
    In summary, change your habit to use File - Save As to save your master document and you can't go wrong.
    -Noel

  • Turn a MIDI file into a audio File?

    I am having some problems turning a midi file into an audio sample file. Can some one walk me through this. I'm sure I'm doing it right but the result is not!
    Any help would be appreaciated
    Maxx
    G5 Duel 2 gig   Mac OS X (10.4.5)   4 gigs memory / 192 digital interface / Logic 7.1.1
    G5 Duel 2 gig   Mac OS X (10.4.5)   4 gigs memory / 192 digital interface / Logic 7.1.1

    OK, a little groundwork first. The one thing MIDI isn't is anything to do with sound! Sounds like a bold statement but I want to make that clear just in case.
    MIDI controls things like external synths and VST plug-ins which are what make the sounds.
    So, in order to convert MIDI to audio you need something to play the MIDI file. Logic of course has plenty of great built-in synths which you can use if you don't have external hardware.
    Simply associate a Logic synth with each MIDI channel and then conduct a 'Bounce'. The resulting file is a recording of the synth sounds your MIDI file was controlling.
    I apologise if that lot sounds a bit patronising but I have no idea what level you are at. Either way I hope it helps.
    Rik

  • How to turn a pdf file into excel document and keep original format

    I Have an excel bid form that i use all the time ,then i convert it into a PDF  And once in a while i need to add something to it  I paid for acrobat but when i try to turn the PDF back into an excel document the format is changed , the columns are in the wrong places And it does not look at all like the original excell form is there any thing i can do to  fix this If not this will be useless to me  any help appreciated

    A PDF does not contain any spreadsheet, word processing or page layout file format information.
    No "format", columns, rows, etc.
    "When you create a PDF, you’re painting a picture. Your paintbrush is the is the result of a combination of the software used to create the source document and the software you’ve chosen to convert your source document into the universal electronic document format we all know as PDF.
    Like the painter’s brushstrokes, each character, each line and each image is fundamentally independent, but they can interact with each other to produce particular visual effects. On the PDF page, objects are connected by a coordinate system and not a lot else. There’s no logical, semantic connection between the letters comprising a word; characters simply happen at a series of locations on the rendered page.
    As originally designed, PDF is fundamentally a system for painting objects onto a page, plus a whole lot of other features we aren’t talking about right now! There’s no innate concept of words, sentences, paragraphs, columns, headings, images, tables, lists, footnotes – any of the semantic structures that distinguish a “document” from a meaningless heap of letters, shapes and colors. PDF is fundamentally about how the document appears on the page, not how it looks when abstracted from the page."
    Duff Johnson, Each PDF Page Is a Painting
    http://talkingpdf.org/each-pdf-page-is-a-painting/ 
    Be well...

  • How to write a Xml installation file to build a web installer using IzPack.

    Hi Everybody,
    I am using IzPack 3.11.0 version.I'd like to create a web installer using IzPack.IzPack soft has provided one p.d.f. In
    which they has explained how to create a standard installer using xml installation file,however ,they have not explained
    how to create a web installer using xml installation file.
    Could anyone help me how to create a web installer using xml installation file,please?? It is very very urgent.
    Any help will be highly appreciated.Thank you very much in advance.

    Hi,
    that is not really a java related question. Have you tried to find some IzPack support forum? I've never heard about it, so I can't help.

  • XML Date File into PDF

    I have an XML data file that I want to use to populate a pdf fill-out form. There is enough data in the file to populate several forms. Is there a way of moving each set of data from this XML file into a seperate pdf fill-out form?

    Hi,
    There are many ways to convert XML files to PDFs through java.
    One of the easiest way is by using iText.jar which have classes for conversion.
    The following are the required steps
    1. Create a document object for the XML file ( Using DOM or SAX parser).
    2. Parse the xml document and extract the content to write in PDF.
    3.Create a itext Document object.
    4.Get a PdfWriter instance for the PDF file.
    5.Write in the pdf the extracted text using the document object.
    Refer <a href="http://itextdocs.lowagie.com/examples/com/lowagie/examples/general/HelloWorld.java">here</a> for a simple pdf writer example.
    Refer <a href="http://java.sun.com/developer/codesamples/xml.html">here</a> for examples of XML Parsers.
    Regards,
    Uma

  • Import xml zip file into database

    Should it be possible to zip the xml file and insert the that zip file into database?

    Hello,
    You can refer to <p>this article to see how store/edit files with the Webutil library<p><br><br>
    Francois

  • Import XML/DTD files into iStudio

    I am having Spect Generator files with extension .ecs files
    I need to import these files into iStudio to create commonview. iStudio accepts either XML or DTD formats
    How can I convert these files to XML or DTD files without losing the Structure layout or EDI format ?
    Let me know ASAP.

    Hi,
    I don't know what ".ecs" files are, but it sounds that you may need to create / use D3L dtd's.
    Please look at
    Oracle Application Server InterConnect User’s Guide 10 g (9.0.4)
    Part No. B10404-01
    and especially Appendix B for more information.
    You can download it from
    http://download-east.oracle.com/docs/cd/B10465_01/integrate.904/b10404.pdf

Maybe you are looking for