How to merge five different xml input files into three output files

Hi All,
Can you please explain me to merge 5 different xml input files into 3 output xml files.
I'm looking forward for ur suggestions...
Thanks
Pullarao

HI
Please see the below links
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
BPM CollectPattern..
http://help.sap.com/saphelp_nw2004s/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm
Thanks !
Regards
Abhishek Agrahari
Questions are welcome here!!
Also mark helpful answers by rewarding points

Similar Messages

How do your create an xml glossary file?

Everyone talks about importing the glossary from an xml file , even from one created from Excel. I have browsed until my fingers bleed and watched the tutorials and seached the Captivate files to try and find a glossary root file to work with.
Please excuse my Newb question but how to I create an xml file, specially using Excel (the easiest way for me to set up a Glossary)? Is there an example I can work off? How do I paste the import xml tags as offered in the widgit to such a file.
This glosary file will be imported and used in to approximately 40 modules so obviously I want just one file to work with.
Again sorry for the newb question.

Hi Jeremia,
From one newb to another ;o)
I ditched the whole thing as soon as I figured it out because putting the glossary in to the captivate slides was really clunky and not a neat solution. Instead we are using our custom written background database and having a glossary link in the main navigation menu, a luxury many captivate scorm projects would not have.
However the spreadsheet is a way of writing all the tags needed for the xml code (fill down). Just highlight ALL the cells with all the tags as per the screen shot, copy and then paste in the open dreamweaver page. However, make sure the dreamweaver page is an xml page. You can then use the xml dreamwever page as the import in to captivate.
Because you are copying from a spreadsheet the paste action in dreamweaver will insert tabs between the data of the cell. You get rid of this by doing a search and replace...search for the tab and replace with nothing, effectively deleting the unwanted tabs.
It is highly inelegant but it works.
Hope this helps and does not confuse it further.
Re: How do your create an xml glossary file?
created by bittymiah83 in Adobe Captivate - View the full discussion
This is very helpful - I'm just missing the piece of how I import the excel data into the Dreamweaver code. Am I repeating the same code over and over in Dreamweaver and cutting and pasting from the excel file?
I'm a newb also so any help would be appreciated!
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6173858#6173858
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6173858#6173858
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6173858#6173858. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Captivate at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How to merge two different images in photoshop?

I am new here. I am starting to learn photoshop.How to merge two different images in photoshop? Please guide me. Thankyou.
http://www.nissiinfotech.com/

SPAM

Merging randomly-named XML data file on client-side with pdf designed in Livecycle 7.0 (and addition

Okay, as a heads up I work for a financial institution and we are converting our legacy "jetforms" to pdf format. I have in my staff for the project, 2 code developers and myself- a form designer. We have currently spent 2 months in trial and error attempting to resolve this problem, please let us know anything you can have. All client-side (internal) machines are running Windows XP and Adobe Reader 7.0.7
The software we use as a financial institution allows our users to export a customer's data file onto their machine which is then renamed to include the member's account number and first and last name for our staff to determine which data file they need more accurately. In legacy jetforms, we have developed a program that pushes the data from the customers file that they select, into the jetform that they want to open and the matching fields in the data file fill in the fields of the jetform. Clean and simple.
Now, i have hit nothing but frustration when attempting to perform the same process with pdfs using a form designed in livecycle designer 7. First, i see no obvious command for opening a pdf and importing a data file using a command line, like pdfmerge or something of the sort in which an xml data file can be specified and a pdf can be specified. I saw something like it using an fdf format and attempted to do this but apparently reader cannot import the data into the pdf that was designed adobe livecycle 7. All i have been seeing is database connections and using javascript inside the form to populate fields based on these database connections, etc. etc. or doing a manual file>import data>etc. which we don't want to have our staff do. We do not have reader extensions enabled, simply because i cannot get an adobe representative to call me and discuss pricing nor see any estimated pricing chart around. I don't know if reader extensions are necessary for this or not but i'm becoming very very frustrated with it.
We don't want a complex server-side data connection binding with dynamic input. No, we just want it where our developers can say "if this data file is selected, and this pdf form is selected run this command" which would be a simple pdfmerge type solution. Is this possible or do i need to stay with jetforms until our software the billion dollar financial institution uses does form building inside its own application? I don't want to fight about who is better, what version to use, etc. I just want the straight up honest truth. If you need to know the pricing that the reader extensions would have to go by, assume there will be 500 client computers that will need to use it.

From your post it sounds like you are Central Pro (a product for which I am by no means an expert), but you say you want to upgrade to a newer product from your "legacy" one. Is there a reason for this? Have your requirements change so that it no longer fits them? Central is still in the current Adobe roster and as far as I know there is no plans to get rid of it any time soon, so if it does everything you want I don't see why you would want to change.
There is no product in the LiveCycle suite that merges xml data into a form from the command line. LiveCycle (with the exception of Designer) is a suite of server products, so the closest you would come is LiveCycle Forms (merge the xml and create a fillable PDF) or LiveCycle Print (merge the xml and print the form).
Hope this helps somewhat.
Chris
Adobe Enterprise Developer Support

Weblogic 12g Server - EAR with WAR - how can I have different XML parsers

Hi All,
I have a requirement where I need to have two different XML parsers in the same enterprise application.
By backend Spring container require a XML parser and my JSP code which has XSLT logic require another XML parser.
If I specify -D System property then it is applied to the whole Enterprise application. Instead I want a way to specify different XML parsers one for Spring backend container and the other for JSP pages.
I am deploying my application in Weblogic and it is an EAR file.
Thanks in Advance,
Kishore Veleti A.V.K.

check this one.
-Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl

How to HTTP-Post different XML messages to one receiving URL on XI side?

Hi
I have a problem with a HTTP => XI => IDoc scenario.
A client want to send 4 different XML documents to only 1 receiving URL on the XI side. How can I handle this in XI???
To send XML data via HTTP to XI you have to specify the namespace, interface and service in the URL. But I only can specify 1 namespace, interface and namespace in the URL...
But how can I define a generic message interface for all 4 messages.
The solution with 4 receiving URL's is easy, but not workable for the client
Thx
manuku

You can do following:
Create an interface with an artificial root node like this:
root
- structure message 1
- structure message 2
- structure message 3
A simple XSLT/Java mapping adds that root node to every message.
Create different mappings based on the structure if the different mappings and do routing based on the same.
Another option: Upgrade to PI 7.1. Here you can simply create a service interface with different operations and routing/mapping based on the operations.
Regards
Stefan

Please Help with XML input file

I created a flash swf with AS3 and i am loading the data via XML. I have a background that needs to load and I also created a box in which I can change the color via XML. I am have problems writing the XML code. Could someone please help. I'm brand new to this so I don't know if i'm even close. Here is the xml info i have so far. thanks
<data backgroundColor="0x202020" width="400" marginTop="150" marginBottom="150"><![CDATA[COPY GOES HERE ]]>
</data>
<backgrounds switchDelay="6000">
<image allowScaling="true">background_images/image1.jpg</image>
</backgrounds>

Yes, it is possible. Unfortunately I can't provide any specifics for an XML data file because we use the "field nominated" format.
Essentially, the data file contains data definition elements and references to the form(s) that the data gets applied to. With the field nominated data file (and an XML file is probably similar) there are two basic methods to do this. One, there is a form reference followed by all the field definitions that are to be applied to that form; then if there are other forms there would be another form reference followed by the fields for that form. Two, the data file would contain data field definitions as "global" fields and this would be followed by all of the form references that these global fields would be applied to; optionally, there would be form-specific field definitions following some of the form references.
In field nominated format this looks like:
^form form-1-name.mdf
^field name
George Jones
^field amount
1234.00
^field date
01/01/2000
^form form-2-name.mdf
^field regarding
Tammy Wynette
^field occupation
country music artist
or
^global name
George Jones
^global amount
1234.00
^global regarding
Tammy Wynette
^global occupation
country music artist
^form form-1-name.mdf
^field date
01/01/2000
^form form-2-name.mdf
As I stated, I don't know how this would look within an XML file but I'm sure the concept would be the same. For the first example there might be a form reference followed by all the associated field definitions. In the second example there would be the global field references followed by the form references with the optional imbedded field reference(s). Or, at least, something similar.
Perhaps someone that uses XML files will provide appropriate samples.

How to merge two columns in csv file using vbscript?

How i can merge two column in csv file using vbscript or powershell?
1 , 2 , 3 , 4 , 5
1 , 23 , 4 , 5
thanks

Here are two examples
http://msdn.microsoft.com/en-us/library/ms191250.aspx
calulated
http://msdn.microsoft.com/en-us/library/ms191250.aspx
Gary Newman MCSE, MCT, CCNA, MCSD, MCPD, MCDBA, MCAD, MCSA, MCTS Developer and Administrator On SharePoint 2013 SharePoint Practice Manager for AmeriTeach Denver, CO.

How to merge 3 different tables using ADF BC?

Hi
I have 3 tables (i.e., Employee, Dept, location)
First i need to merge Employee and Dept as "*EmployeeDept*" table with the primary key(EmployeeID) and then i should merge "*EmployeeDept*" with Dept table with the primary key(DeptID) of Dept table.
I tried "*ViewLink*" however i am able to merge only two tables(i.e., Employee and Dept) as "EmployeeDept", no idea how to merge the third table(Dept) with it.
Please help.
Thanks in advance

Hi Timo
Employee -- EmployeeID,FirstName,LastName,*DepartmentID*, JobID
Dept -- DepartmentID, DepartmentName, ManagerID, LocationID
Location -- LocationID, StreetAddress, City, CountryID
Will join Employee and Dept table as "EmployeeDept" by using Query *( select EmployeeID, FirstName, DepartmentName,*
LocationID From Employee, Dept where Employee.DepartmentID = Dept.DepartmentID)
So now i need to join this new "EmployeeDept" with Location table to get the columns from both using query like
*(select EmployeeID, FirstName, DepartmentName, LocationID, StreetAddress, City, CountryID From EmployeeDept, Location*
where EmployeeDept.LocationID = Location.LocationID)
Thanks

How to extract data from xml and insert into Oracle table

Hi,
I have a large xml file. which will have hundreds of the following transaction tags having column names and there values.
There is a table one of the schema with coulums "actualCostRate","billRate"....etc.
I need to extract the values of these columns and insert into the table
<Transaction actualCostRate="0" billRate="0" chargeable="1" clientID="NikuUK" chargeCode="LCOCD1" externalID="L-RESCODE_UK1-PROJ_UK_CNT_GBP-37289-8" importStatus="N" projectID="TESTPROJ" resourceID="admin" transactionDate="2002-02-12" transactionType="L" units="11" taskID="5017601" inputTypeCode="SALES" groupId="123" voucherNumber="ABCVDD" transactionClass="ABCD"/>
<Transaction actualCostRate="0" billRate="0" chargeable="1" clientID="NikuEU" chargeCode="LCOCD1" externalID="L-RESCODE_US1-PROJ_EU_STD2-37291-4" importStatus="N" projectID="TESTPROJ" resourceID="admin" transactionDate="2002-02-04" transactionType="L" units="4" taskID="5017601" inputTypeCode="SALES" groupId="124" voucherNumber="EEE222" transactionClass="DEFG"/>

Re: Insert from XML to relational table
http://www.google.ae/search?hl=ar&q=extract+data+from+xml+and+insert+into+Oracle+table+&btnG=%D8%A8%D8%AD%D8%AB+Google&meta=

How to merge the objects of one rpd into another rpd in OBIEE.

Hi to all,
I am new user to OBIEE. I was given a task to merge two repositories. I tried a lot but couldn't do it. I went through many forums and discussions to find the relevant answer but couldn't find anything. Actually my requirement is to merge two repositories. For example, consider two repositories namely rpd1 and rpd2 respectively. Both repositories has their own set of objects. I just want all the objects of rpd2 to merge with rpd1 under the name rpd1. Is it possible? If it is possible... Please anyone let me know the steps to do it.
Thanks in advance
Thenmozhi

Hi,
See the below URLs will help you,
http://varanasisaichand.blogspot.com/2010/03/how-to-merge-two-repositories.html
http://gerardnico.com/wiki/dat/obiee/bi_server/obiee_repository_merge
http://oraclebizint.wordpress.com/2008/03/24/oracle-bi-ee-101332-merging-repositories-substitute-for-import-from-repository-2-way-merge-with-no-parent-part-2/
Thanks,
Balaa...

How do I convert a deciaml input to a hexidecimal output in labview?

Can somebody please explain what seems like a simple conversion ?
I would like to convert a decimal input to a Hexidecimal output:
i.e input value of 20000
converting to a hexidecimal output of 4E20
hope you can help
AW

Hi Anil,
Are you looking for this one?
See the attachment:
Thanks as kudos only
Attachments:
dectohexph.vi ‏10 KB

DT is correct as per XML input file?

HI,
I am getting a xml file with following structure:
<Request>
-<Field>1</Field>
-<Node1>
--<Field2>2</Field2>
--<Node2>
---<Node3>
<Field3>3</Field3>
<Field4>4</Field4>
---</Node3>
---<Node3>
<Field3>5</Field3>
<Field4>6</Field4>
---</Node3>
---<Node3>
<Field3>7</Field3>
<Field4>8</Field4>
---</Node3>
--</Node2>
-</Node1>
</Request>
I need to map only Node3 Field3 and Field4 values to the target structure:
I created the DT as below:
MT_Type
-Field1 -
1..Unbound
-Node1----
1..Unbound
Field2--
1..Unbound
-Node2----
1..Unbound
Node3--
1..Unbound
-name--
1..Unbound
value----
1..Unbound
I am getting error in MM, is my DT is wrong? any Inputs?
Thanks
Rajeev

Hi,
How are you trying to map?
Is it like this???
<Request> ______________ MT_Type
-<Field>1</Field> ______________ -Field1 -
1..Unbound
-<Node1> ______________ -Node1----
1..Unbound
--<Field2>2</Field2> ______________ Field2--
1..Unbound
<Node2> ______________ -Node2--
1..Unbound
---<Node3> ______________ Node3--
1..Unbound
<Field3>3</Field3> ______________ -name--
1..Unbound
<Field4>4</Field4> ______________ -
value----
1..Unbound
---</Node3>
---<Node3>
<Field3>5</Field3>
<Field4>6</Field4>
---</Node3>
---<Node3>
<Field3>7</Field3>
<Field4>8</Field4>
---</Node3>
--</Node2>
-</Node1>
</Request>
Explain with more details
Regards
Suraj

How can I process an xml/xsl file pair that require the Internet Explorer dom?

My personal navigation device (GPS) generates xml files that contain a record of where I have been, together with when I was there, how fast I was driving at the time, etc. taken at approx. 5 second intervals. This xml file has an xml-stylesheet with type="text/xsl" but that stylesheet is written to the Internet Explorer dom standard. The stylesheet interfaces with google maps to display a map that shows my path and it also displays tables of data including distances that are computed from latitude/longitude pairs. I can supply a small sample xml file and the xsl file as well if they are needed to diagnose my problem. I cannot find any browser other than Internet Explorer that handles these files satisfactorily. I prefer to process them from a Linux environment but with the Internet Explorer requirement I cannot do so. The browsers that I have tried and that have failed are Firefox, Opera, Konqueror, Chrome, Epiphany, Midori, Arora, and Links.
One line in the xls file in particular gives grief in the browsers like Firefox that at least attempt to do more than display the raw xml file:
xmlns:cymath="urn:smiletime-cybarber-net:math"
A comment in the xls file says this about the problem:
"Tested and currently only compatible with Internet Explorer version 6 or version 7 (as this script includes JScript functions called by XSL, msxsl:script extension is required; also, the produced XHTML document embeds javascript functions exploiting the IE DOM).
"In order to provide compatibility with Firefox, other than checking the compatibility of the IE DOM, the cymath:distCosineLaw function still needs to be ported."

You may get an answer, but it is not really the sort of subject covered by this forum, I suggest you try [http://forums.mozillazine.org/viewforum.php?f=49 Mozilazine] and if you solve the problem post back again.

How to get and parse xml input parameter?

Hi,
If one transaction input parameter is xml string, like as below.
<a>

 <c>1</c>
 <d>2</d>


 <c>3</c>
 <d>4</d>

</a>
If I would like to get each element (maybe by repeater action), how to do that?
Thanks!

Hi,
You must convert the string into xml with necessary action block. (XML Functions --> String to XML Parser)
Then you must put a repeater after converter action and you must set Xpath expression for repeater (configuration) like below:
String_To_XML_Parser_0.Output{/ARef/BRef}
after repeater you can use values like below:
Repeater.Output{/BRef/c}
Repeater.Output{/BRef/d}
Regards.

How to merge five different xml input files into three output files

Similar Messages

Maybe you are looking for