Tutorial: 8 Adding a Conditionally Dependent Field

Hi,
I am trying to implement chapter 8 Adding a Conditionally Dependent Field. However, the Commission percentages stays enabled no matter what the value of the jobid is.
Is this a bug or am I doing something wrong here?
Thanks, Joep

Joep,
If you send your testcase for the LOV problem, we will also look at this issue.
The conditionally dependent items work for me, so may be you made some typo.
Steven Davelaar,
JHeadstart Team.

Similar Messages

Add a conditionally-Dependent Field - Need Help

Hi everyone,
I'm working with JDeveloper10.1.2, UIX pages and STRUTS.
This is my situation:
I have 3 messageTextInput in my UIX page, one to regions, one to counties and another to locations. When I insert a text in locations and regions I need to fill automatically the messageTextInput of the country.
I have a table in my DataBase with this collumns: ID(number), Country(text), Region(text) and Location(text).
How can I do this? Can anyone give me some ideias?
Can anyone help me, Please? Any ideias??
Thanks,
Atena
Message was edited by:
Atena

Anyone?? Any help??
Message was edited by:
Atena

Sales Order creation of adding new condition type to Item

Hi Expert,
The sales order has been created and need to add new condition type (Z601) to the first item(10). While adding the condition I am getting warning message like
"Item 000030 exists already; the entry will be ignored".
Where item 030 will be the last item.
I have cheked but it's a standard report SAPFV45P, we can't modify. Please let me know can we set any field in the sales order so that we wont be getting this message.
Regards,
Mahesh

Hello,
If you would like to add the Condition Type automatically for a specific Item based on some condition (Lets say, Item Category), then you can code a Pricing Routine in VOFM Transaction and it will be automatically assigned.
Thanks and Regards,
Venkat Phani Prasad Konduri

Can I have essential fields and dependent fields on document?

Hi,
I am looking to use Echosign for insurance application forms. So, I need to see if I can have dependent fields. So, if a tick box is answered "Yes" then another field is required to have an answer also.
Is this possible?
Also, for someone completing two sets of medical questions, on one form - can I assign fields to each person in the same way I can with the signature?
Many thanks
Sharon

Hello Sharon,
Yes, you can have conditions to produce a inter-related form fields. You can refer to this link for creating forms:
EchoSign Help | Forms | Fields | Types
Also, you can assign fields to specific recipient involved in the transaction by double clicking the field and selecting Role and saving it.
Here is the link:
Forms | Fields | Roles
Let us know if you need help!
Regards,
-Rijul

Not able to create conditional required fields at Tcode CJ20N Proj Systems

Hello experts,
I have a requirement to create a few custom fields under custom enhancement tab in CJ20N transaction, and depending on a particular value for one of the fields, another set of fields need to be set to required. (If FIELD1 = 'Y', FIELD2 & FIELD3 should be set to required)
My approaches..
1. Assign a screen group to FIELD2 and FIELD3. If FIELD1 = 'Y' then LOOP AT SCREEN, and set screen-required = 1 for that specific screen group.
Problem with this approach is that, if I select FIELD1 = 'Y' (hit space or enter -> sy-ucomm = TOGGLE), the fields are successfully set to required. However, now if at this point I go and change value for FIELD1 = 'X' (hit space or enter), FIELD2 and FIELD3 still remain set to required, and keep requesting value.
2. Do not set any fields to required. Instead set it to an information message in PAI, informing user that this field requires a value when FIELD1 = 'Y' on TOGGLE and SAVE.
Problem with this approach is that even though during TOGGLE event user is provided with an informational message, if the user directly decides to SAVE (no change for TOGGLE event), in this case the same message is displayed, and the project screen itself is closed. I do not think it would be ideal for the user to see the entire project close on SAVE everytime they miss a conditionally required field.
I am just not sure at this point how to handle this at SAVE so that I can still have the same control as I would when TOGGLE event is triggered.
Experts please help if you have come across such a situation!!! Your insight would be greatly appreciated!
Edited by: akkinair on Dec 16, 2011 1:25 AM

Please find below the response.
1. Assign a screen group to FIELD2 and FIELD3. If FIELD1 = 'Y' then LOOP AT SCREEN, and set screen-required = 1 for that specific screen group.
Problem with this approach is that, if I select FIELD1 = 'Y' (hit space or enter -> sy-ucomm = TOGGLE), the fields are successfully set to required. However, now if at this point I go and change value for FIELD1 = 'X' (hit space or enter), FIELD2 and FIELD3 still remain set to required, and keep requesting value.
--> When FIELD1 chnage used module with additon CHAIN-REQUEST and check its value if it is to be set to optional by using loop at screen and set screen-required =0.*_
2. Do not set any fields to required. Instead set it to an information message in PAI, informing user that this field requires a value when FIELD1 = 'Y' on TOGGLE and SAVE.
Problem with this approach is that even though during TOGGLE event user is provided with an informational message, if the user directly decides to SAVE (no change for TOGGLE event), in this case the same message is displayed, and the project screen itself is closed. I do not think it would be ideal for the user to see the entire project close on SAVE everytime they miss a conditionally required field.
--> Can you please clarify it.
Thanks
Nabehet

Data Change Condition Dependency

I would like to create a data change notification dependency for a product specification.
Can someone please provide an example of a xquery expression in the "Data Change Condition Expression" field?
I would like to create a condition so as to enable the transition for a specific line item only when an orderlineitem property contains a specific value , but i am not sure how I can access this info (orderlineitem property) from within the condition expression.

I think you just put the fixed value in the xquery field, such as
'this value means the next function can start'
When the field is then updated and with value 'this value means the next function can start' the function will start.
I ave tested this and it appeared to work fine.
Viktor

Export option for Instance dependent fields to BOM

Is there any instance dependent field that can be exported to the BOM?
For example, I don't seem to be able to do something extremely simple like add a NO_STUFF attribute to a part in the schematic and have that attribute be reflected in the BOM.
As I see it there is a fundamental missing piece to the database structure. I should be able to create symbols, footprints, and parts independently. Currently it seems that symbols are attached to parts as is every other exportable field. Why allow me to add multiple footprints to the same part if I can't select/export the part number that reflex the footprint option used? As it is, I am relying on the purchaser to know too much about the schematic or I have to build a large portion of the BOM by hand. Or, I create a new schematic part for every part number. While that is possible, it is extremely time consuming given that the UI is the only database entry point available? A spreadsheet/software/scriptable entry point would make that option more realistic.
Short of building a complete per part number corporate database, I could create a workable BOM if I was able to export all or any instance dependent field such as the part's attributes fields, label, etc. Is there any way to do this? Can it be added? Some other BOM export customization would be nice, but this would at least make the exported BOM usable.
Greg

Lacy,
Thanks for the suggestion. I was confusing your reference to "spreadsheet view" for the spreadsheet view of the BOM report and not the spreadsheet of the design. Unfortunately, though the spreadsheet view does show some instance specific information, it does not combine parts or show some of the database information.
I guess my comment is more for NI Developers. The BOM generator does look at instance specific information because it doesn't combine instances of parts (resistors, caps, etc) that have difference types set in the schematic. I therefore don't think it would be that difficult to let me add instance specific fields, (label, attributes, etc) to the BOM. My examples are ment to illustrate the importance of that.
Changing the USER FIELDS in the database when they are edited on the schematic is a dangerous option at has burnt us before. I wouldn't call that expected behavior. When I change the symbol for a part I am prompted to save it to the database. If I change the symbol for a part in the database, I have to run "Update Components" to write those change to my schematic. (as I would expect) Yet if I change the user fields in the schematic, the changes automatically propagate to every thing and get saved to the user database. This behavior is not constant. A changes made to a part in the schematic should stay in the schematic and affect only the instance changed. Changes made to the database should have to be pushed into a schematic.
I have submitted a feedback forum to NI as well.
I am used to posting to the CVI forums where the developer are very responsive. Perhaps where Electronic Workbench was a NI acquisition, the developers are further removed from user feedback.
Greg

Having problems when adding new Curency value field + currency field.

I need to add a new Currency field (CURR, length 15, 2 decimal places) plus the Currency field itself to a view.
I'm really struggerling. I have looked at the existing SAP fields in the Component workbench and I have to admit I can not see how a field is linked/related to the currency itself. Is this link established purlely at the disctionary level?.
Has anyone added their own Z field value and Z currency field before. I can create both fields and display them, but what I can not work out is how I related them within the component workbench, or is this done from the dictionary?.
Any help would be greatly appreciated.
I should have been able to look at an existing SAP example and work out how it's done, but so far I can not see/determine how this is achieved, even though someone has mentioned that it's controlled via the GET_I_field method. Looking at this method I was expecting to see some mention of both the Currency value field and the Currency field. But as I don't see these confusion reigns.
Jason

That's correct, but am I right in thinking that you can't actually create the currency key field itself?.
I am aware that currency value fields can be created which reference a currency key field, but can see nothing that allows me to create a currency key field to be referenced.
I hope that makes sense.
Also, I have amended the structure, changing my value fields from Decimal 15,2 to Currency 15,2 and have created a new currency key field in the structure and referenced this from the Currency value field.
Witin the Component/view/context node I can see this new currency key field, but it appears as STRUCT.fieldlabel whereas my currency value field appears in the context node as EXT.fieldlabel, because it was created in the AET.
My problem is that when attempting to add the currency key field onto the screen I don't have it to select from within the list of structures/attributes. All the others attributes in the context node seem to be there, except the new currency key field/attribute.
The attribute has a SET_fieldlabel, GET_fieldlabel, GET_M_Fieldlabel and a GET_I_Fieldlabel, which I believe is all that should be required.
Does anyone know what my problem could be?.
Jason

Adding pricing condition type while complaint creation

Hi,
I want to add condition type , whille calim creation. I have written the Zpgm using crm_ordwer_maintian , we can do that.
But the problem is I need to put in some BADI, i tried order_Save and pricing_I badi.
But it gives dump 'maintian' bapi in the order_Save. I treid with 'multi_ow' but its not adding the condition type.
Please help me , where I need to put this code ?
Thanks,
Sushant

heyy, its working fine , some parameter missing.

Problem in adding custom table's field in MM46

Hi,
I have a complex requirement of adding fields of custom table in MM46 for mass maintance.
I did most of the part but dont know what is missed.
Steps that i followed
1. used tcode MASSOBJ- I Added Ztable name to application table for Object type - BUS1001001.Here i dont know what to provide in other attributes of entry example Number, DB table etc. [SCREENSHOT OF MASSOBJ|https://plus.google.com/photos/114088763388693559922/albums/5704943614516268609]
2. Used tcode OMSR- I added entry of Ztable'field here i gave selection group as 211, maint status as KDEVALBQPSZXCFG
alv group- blank. [screen shot of OMSR |https://plus.google.com/photos/114088763388693559922/albums/5704943614516268609]
After doing these steps Table name and field of table is visible in mm46. But problem is Field is not editable that is in display mode only.
Pleae see this snapshot - [error image|https://plus.google.com/photos/114088763388693559922/albums/5704938582830478801]
Please help me by telling what i missed and am i adding right attributes for entries in MASSOBJ AND OMSR?
Thanks.
Waiting for expert's comments.
Reagards
Rahul
Please do not use words like 'urgent'
Edited by: Rob Burbank on Feb 3, 2012 11:31 AM

Hi Rahul,
Wellcome to SDN. Perhaps you know it, and although it's for older releases, perhaps it could help you. Please, see SAP Note 381942 - Mass changes for logistics data in the article master.
I hope this helps you
Regards
Eduardo

Adding code to additional fields in Ad Hoc Query

Hello,
I am trying to add code to existing additional fields available in IT0001 - Field SYHR_A_P0001_AF_PL_CTRY.
I have added code in the field code section, but the field does not get populated.
I also tried to add code to Start of selection / Record processing sections, but the values are not populated.
What am I doing wrong?
Thanks,
Vaishali

Hi Vaishali,,
   Your question is not clear, no probs. you plz check this code !!
FUNCTION zhrintf_om_pernr_info_adhocqry .
""Local Interface:
*" IMPORTING
*"     VALUE(FI_PERNR) TYPE PA0001-PERNR
*"     VALUE(FI_BEGDA) TYPE PA0001-BEGDA
*" EXPORTING
*"     VALUE(L_MC_STEXT) TYPE HRP1000-MC_STEXT
DATA: dep_text(40) TYPE c,
        l_plans TYPE pa0001-plans,
        l_sobid TYPE hrp1001-sobid,
        l_mc_short TYPE hrp1000-mc_short.
Get Employee Position ID
SELECT SINGLE plans
    FROM pa0001
    INTO l_plans
    WHERE pernr = fi_pernr
          AND begda LE fi_begda
          AND endda GE fi_begda.
l_sobid = l_plans.
Check if OU is Department
IF ( l_sobid NE '00000000' ) AND ( l_sobid NE '99999999' ). " Terminated Employee
    WHILE NOT ( ( l_mc_short(1) EQ '2' ) OR ( l_mc_short(1) EQ '1' ) OR ( l_mc_short(1) EQ 'X' ) ).
      SELECT SINGLE sobid FROM hrp1001
             INTO l_sobid
             WHERE objid = l_sobid
             AND    rsign = 'A'
             AND    sclas = 'O'
             AND    begda LE fi_begda
             AND    endda GE fi_begda.
      SELECT SINGLE mc_short mc_stext FROM hrp1000
             INTO (l_mc_short, l_mc_stext)
             WHERE otype = 'O'
             AND    objid = l_sobid
             AND    begda LE fi_begda
             AND    endda GE fi_begda.
Empty l_mc_stext if OU is not Department
      IF NOT ( ( l_mc_short(1) EQ '2' ) OR ( l_mc_short(1) EQ 'X' ) ).
        l_mc_stext = ''.
      ENDIF.
    ENDWHILE.
ENDIF.
ENDFUNCTION.
Regards
Zulfikhar Ali

Condition Dependent Document Output

Hello, all
Please help me,
We have extended classic scenario in SRM 5.0.
May I to use Condition Dependent Document Output in Spro
if I need to print 2 smartforms for one purchase order?
Best regards,
Guzal

Hello, all
I'm solved a question. I'm used the BADI BBP_OUTPUT_CHANGE_SF.
Best regards,
Guzal

SD-Pricing Conditions: Allowed Fields

Hi Guys
basic functions > pricing> condition table> conditions:allowed fields > new fields
when I try to add a new field: VOLEH ( selected using F4), system throwing following warning message: "Choose the key from the allowed namespace". We can save by ignoring this message.
But when I try to create condition table, this field is not visible.
Please suggest me how to add field VOLEH(Volume unit).
Regards
Uma

When you open the possible entries you usually find the field twice, once in the structure for header or item, and once in the communication structure. Most likely your field is only in the item structure, you need to add it to the communication structure as well (or better a developer needs to do that).
You might need to fill the field in the Pricing_Prepare user exit too.
The warning usually appears, because it is SAP namespace, if you need to add the field, you might consider putting ZZ in front of the fieldname (ZZVOLEH).
Edited by: Markus Müller on Jun 27, 2008 3:33 PM

Condition-Dependent Output not processed

Hello,
I have configured conditions for output for purchase order documents (BUS2201) in the following path in SPRO > SAP Supplier Relationship Management > Cross-Application Basic Settings > Set Output Actions and Output Format > Condition-Dependent Document Output.
The purpose for this is to check the purchase order status prior to sending out the PO as to ensure that only successfully replicated POu2019s are sent to suppliers. When I create a PO that passes the conditions (iow the conditions are True), the output is generated in a Not Processed status. I have to now process the output manually or by running program RSPPFPROCESS. Once processed, output is successfully sent.
Note that the Time Of Processing setting is set as u201CProcessing when saving documentu201D. I would expect the output to be processed automatically by the system, but it is not.
If I create a purchase order that does not pass the condition (iow the conditions are false) an output is also generated with a Not Processed status, but I am unable to process it due to the conditions that are not met.
Please advise why the output that passes the condition is not processed automatically.
Kind Regards
Rene

Hi, If you want to work with Condition-Dependent PO Output, you have
to set the conditions for output in Define action for Purchase order
output. Under Action determination and Action summarization you can
choose from different option. Also clean-up customizing inconsistencies using transaction SPPFCADM and adjust to determination technology "Determination Using Conditions" to retest. Check note 564826 which may be helpful.
Best Regards
Lauren

Issue with Condition dependent PO output in SRM 4.0

Thought I am using Condition-Dependent Purchase Order Output
The PO preivew still picks up the form which is defined under Define Actions for Purchase Order Output
Please suggest.
Thanks in advance

Hi,
Have a look at the following note:
Note 968534 - Incorrect determination of conditions on the BOR object
Thanks,
Pradeep

Tutorial: 8 Adding a Conditionally Dependent Field

Similar Messages

Maybe you are looking for