Problem in adding custom table's field in MM46

Hi,
I have a complex requirement of adding fields of custom table in MM46 for mass maintance.
I did most of the part but dont know what is missed.
Steps that i followed
1. used tcode MASSOBJ- I Added Ztable name to application table for Object type - BUS1001001.Here i dont know what to provide in other attributes of entry example Number, DB table etc. [SCREENSHOT OF MASSOBJ|https://plus.google.com/photos/114088763388693559922/albums/5704943614516268609]
2. Used tcode OMSR- I added entry of Ztable'field here i gave selection group as 211, maint status as KDEVALBQPSZXCFG
alv group- blank. [screen shot of OMSR |https://plus.google.com/photos/114088763388693559922/albums/5704943614516268609]
After doing these steps Table name and field of table is visible in mm46. But problem is Field is not editable that is in display mode only.
Pleae see this snapshot - [error image|https://plus.google.com/photos/114088763388693559922/albums/5704938582830478801]
Please help me by telling what i missed and am i adding right attributes for entries in MASSOBJ AND OMSR?
Thanks.
Waiting for expert's comments.
Reagards
Rahul
Please do not use words like 'urgent'
Edited by: Rob Burbank on Feb 3, 2012 11:31 AM

Hi Rahul,
Wellcome to SDN. Perhaps you know it, and although it's for older releases, perhaps it could help you. Please, see SAP Note 381942 - Mass changes for logistics data in the article master.
I hope this helps you
Regards
Eduardo

Similar Messages

Custom Table - New Field

Added SPART in a custom table , I am trying to retrieve an entry from that table where SPART is SPACE. This works fine in DEV, in Q system the select does not work.. What could be the reason ?

>
Sridhar Sarva wrote:
> Added SPART in a custom table , I am trying to retrieve an entry from that table where SPART is SPACE. This works fine in DEV, in Q system the select does not work.. What could be the reason ?
Are you sure that SPART = SPACE? I've noticed before that when you add a new character field to an existing table that already contains records, the default value for the new field on the existing records is NULL and not SPACE. Try replacing the = SPACE with IS NULL.
If this is the case, I think that if you update the record the default will then be changed from NULL to SPACE.

Add a custom table for field selection while creating field catalog for LIS

Hi,
I have a requirement to add a Custom table to be available for field selection while creating a field catalog for LIS. Its required as there are many custom fields to be used for field catalog creation and adding them in one of the existing tables listed is not a feasible option for us. Please let me knw if its possible..?? If yes how to get it done..??
Regards,
Akash Sinha

hi,
You need to add your field in the Data Dictionary first. For example, if
you want the new field in the Order Item field catalog do the following.
Look at structure MCVBAPUSR (SE11). If you already have a user structure
appended to this structure then you can add your new field to your existing
structure. If there is no structure already appended to MCVBAPUSR then you
must create a new structure with your field in it and then append the new
structure to this one.
If you look at structure MCVBAP you will see the data appended to the end
of it.
Now you should see it in the field catalog.
regards,
balajia

Problem in adding custom metada properties

Hi All,
I want to add some custom properties while creating a document in KM repository. I am getting problem while adding the custom group in the property structure "all_groups"...
This is waht i have done so far,
1) I created the custom metadata properties..
2) Created one property struture group XXX and added all the metadata properties in the gruop items field...
3) Added this structure group in all_groups. While saving the changes, its saying "These changes would introduce problematic settings: Group item "XXX" is neither a property ID nor a group name defined in the configuration. Check whether it is the ID of an unmodelled property or the ID is misspelled. Click on OK or Apply to confirm these changes. "
After saving it, following massege is displayed,
"The following configuration objects have some invalid or problematic properties: "all_groups"..
Also the newly created structure is not getting displayed in the document properties.
Please help me.
Regards,
Sandip
Message was edited by: Sandip Agarwal

Hi Robert,
Thanks for your reply. I guess I have taken care of the spelling (have done it 4-5 times )....So may be something else is wrong.
I have sent you a screen shot of the problem to your mail id
Thanks again for you help.
Regards,
Sandip
Message was edited by: Sandip Agarwal

Custom Table Currency field with 5 decimals

Hello,
I have created a custom table and it has a field for 'US Plan Cost'. The users wanted it with 5 Decimals. I have created a custom domain and custom data element of DEC Type with 5 Decimals.
Domain: ZCOST: Data Type: DEC, No. of Characters: 11, Decimal Places: 5.
However When I am trying to create entries in the table though, it's giving me error: Input must be in the format _____,_____,_____,_____~._____
The entry that I am creating is: 1.23450.
I dont know what went wrong? Can anybody please help me?
Thanks Much.

Are you doing this with SM30? or from a program? If a program, be sure your data value is precisely '1.23450'. It sounds like you're inputting something else...
Or, post code?

Having problems when adding new Curency value field + currency field.

I need to add a new Currency field (CURR, length 15, 2 decimal places) plus the Currency field itself to a view.
I'm really struggerling. I have looked at the existing SAP fields in the Component workbench and I have to admit I can not see how a field is linked/related to the currency itself. Is this link established purlely at the disctionary level?.
Has anyone added their own Z field value and Z currency field before. I can create both fields and display them, but what I can not work out is how I related them within the component workbench, or is this done from the dictionary?.
Any help would be greatly appreciated.
I should have been able to look at an existing SAP example and work out how it's done, but so far I can not see/determine how this is achieved, even though someone has mentioned that it's controlled via the GET_I_field method. Looking at this method I was expecting to see some mention of both the Currency value field and the Currency field. But as I don't see these confusion reigns.
Jason

That's correct, but am I right in thinking that you can't actually create the currency key field itself?.
I am aware that currency value fields can be created which reference a currency key field, but can see nothing that allows me to create a currency key field to be referenced.
I hope that makes sense.
Also, I have amended the structure, changing my value fields from Decimal 15,2 to Currency 15,2 and have created a new currency key field in the structure and referenced this from the Currency value field.
Witin the Component/view/context node I can see this new currency key field, but it appears as STRUCT.fieldlabel whereas my currency value field appears in the context node as EXT.fieldlabel, because it was created in the AET.
My problem is that when attempting to add the currency key field onto the screen I don't have it to select from within the list of structures/attributes. All the others attributes in the context node seem to be there, except the new currency key field/attribute.
The attribute has a SET_fieldlabel, GET_fieldlabel, GET_M_Fieldlabel and a GET_I_Fieldlabel, which I believe is all that should be required.
Does anyone know what my problem could be?.
Jason

Problem in adding Custom Provider for Work Management Service

Hello,
I'm facing an issue in adding custom provider for work management service. As you are aware, Work management service is a Provider model and we
can integrate with other systems by adding custom providers. So with that confidence, i have started writing a connector as mentioned below.
Step - 1: Added new provider xml in the below path
"C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\CONFIG\WorkManagementService\Providers"
Provider Name: provider.bizagitasklist
Provider XML Content:
<Provider ProviderKey="DAA52AF3-A147-4086-8C0C-82D2F83A089D" OverrideProviderKey="" Assembly="adidas.TaskProvider, Version=1.0.0.0, Culture=neutral, PublicKeyToken=5d6f3e6be60a351b" > </Provider>
Step -2: Added a class which inherits "IWmaTaskProvider" and implemented the override methods.
public class BizAgiTaskListProvider : IWmaTaskProvider
public string LocalizedProviderName
get { return "BizAgiTaskListProvider"; }
public string ProviderName
get { return "BizAgiTaskListProvider"; }
public Microsoft.Office.Server.WorkManagement.CalloutInfo GetCalloutInfo(IWmaTaskContext context, string taskExternalKey, string locationExternalKey)
return null;
public DashboardExtensionInfo GetDashboardExtensionInfo(IWmaBasicProviderContext context)
return new DashboardExtensionInfo { ClassName = "SP.UI.SharePointExtension" };
public BulkEditResult HandleBulkEdits(IWmaTaskContext context, BulkEdit updates)
return null;
public TaskEditResult HandleTaskEdit(IWmaTaskContext context, BaseAggregatorToProviderTaskUpdate taskUpdate)
return null;
public void RefreshSingleTask(IWmaTaskRefreshContext context, string externalKey)
public void RefreshTasks(IWmaTaskRefreshContext context)
//context.WriteProviderCustomData(
Step – 3: Written a class to fetch the tasks from BizAgi System which has method to provide the task data.
But I’m not able to feed those tasks in the class written in Step – 2 as I’m able to find any method which will take Tasks as Input and I’m not
sure about the format of tasks.
I’m able to debug the provider, and the breakpoint hitting in only one method and two properties.
(LocalizedProviderName, ProviderName, GetDashboardExtensionInfo).
Can you please help me to proceed further in implementing the above solution?
Best Regards
Mahesh

Hi Mahesh,
Although the implementation of work management service application is based on the provider model, I reckon the current SP 2013 RTM does not support custom providers. Only SharePoint task lists, Project server and MS Exchange are supported for now.
Regards,
Yatin

Adding custom table

Hello,
The goal is to add a table where some custom parameters will be stored in order to speed up custom SQL queries.
Is it allowed/recommended to add a custom table to the HDS database?
Is it possible to add a table to the CUIC database? Is it possible to access the CUIC database?
Thanks,
Justine.

I would not add any tables to the HDS DB, pretty sure it's not supported. As for the CUIC database, I don't think you have access to the actual DB itself. Why don't you just build the table in another DB and create a new datasource in CUIC to pull data from this table?
david

Problem with adding a second Categories field to my Enterprise Wiki Page template

I wanted to add a second category field beside the default wiki category. So I did the following steps:-
Inside my enterprise wiki site collection, I added a new Site Column, named “customer” with a managed metadata type.
Then I added the site column to the “Enterprise Wiki Page” content type.
After that using the SharePoint Designer , I added the new “Customer ” column to my EnterpriseWiki.aspx page layout.
The result was that I got a new category field , but I am facing these two problems:-
When selecting items for the new metadata column, the items are not clickable, unlike the default Wiki Category field, which allow users to click on the terms , as follow:-
The new category column was not displayed inside the Tree View , same as for the default Wiki category, as follow:-
So can anyone advice how I can solve these two problems ? Thanks

The Visio Web Part displays Visio diagrams that are located in SharePoint. Once you log out it won't have access to your desktop anymore. Instead you should upload the Visio document to a SharePoint library and then reference it from
there. It would be nice if it was integrated into a single process, but I suspect its not something MS thought enough people would do to spend the time writing the extra code to integrate it. So at least for now its a two step process.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.
so to add a visio diagram , we need to do the following:-
1. upload the visio to SP.
2. add a web part.
3. Browse for the Visio drawing.
by defualt there is no way to directly upload a new Visio diagram...

Problem in adding custom area to ESS

Hi All,
I have created an Area in SPRO and done all the sub area, service assignment with the PCD page path. When I click the link on the Portal I get an exception saying
Fatal error: Area ZNEWAREA does not exist
In the XssMenu iview, when I change the parameter to any SAP provided area then it works fine. But I am getting this error only for the area I created.
My environment is ESS BP 60.2 and ESS components SP 18 on Portal 7.0 SP 9 with ECC 5.0.
There is a refrence of OSS Note 903370 in earlier posts to solve this problem. But this note seems to have been removed from service parket place.
I have posted the entire exception trace below for your reference.
I would be happy to reward points and close this issue.
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Fatal error: Area ZNEWAREA does not exist
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.xss.ser.xssmenu.fc.ModelHandler.onInit(ModelHandler.java:232)
at com.sap.xss.ser.xssmenu.fc.wdp.InternalModelHandler.onInit(InternalModelHandler.java:398)
at com.sap.xss.ser.xssmenu.fc.FcXssMenu.onInit(FcXssMenu.java:255)
at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenu.onInit(InternalFcXssMenu.java:443)
at com.sap.xss.ser.xssmenu.fc.FcXssMenuInterface.onInit(FcXssMenuInterface.java:169)
at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface.onInit(InternalFcXssMenuInterface.java:386)
at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface$External.onInit(InternalFcXssMenuInterface.java:531)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:774)
at com.sap.xss.ser.xssmenu.vc.header.VcXssMenuHeader.onInit(VcXssMenuHeader.java:196)
at com.sap.xss.ser.xssmenu.vc.header.wdp.InternalVcXssMenuHeader.onInit(InternalVcXssMenuHeader.java:225)
at com.sap.xss.ser.xssmenu.vc.header.VcXssMenuHeaderInterface.onInit(VcXssMenuHeaderInterface.java:162)
at com.sap.xss.ser.xssmenu.vc.header.wdp.InternalVcXssMenuHeaderInterface.onInit(InternalVcXssMenuHeaderInterface.java:144)
at com.sap.xss.ser.xssmenu.vc.header.wdp.InternalVcXssMenuHeaderInterface$External.onInit(InternalVcXssMenuHeaderInterface.java:220)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:466)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:354)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:179)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:700)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:269)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:731)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:667)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:879)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:222)
at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1280)
at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:354)
at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:552)
at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:596)
at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:827)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:683)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Thanks and Regards
Srini

Hi Srini,
Are you talking about having created a Payroll Area or a Personal Area in SPRO?

Problem Adding Custom JSF Components to Oracle JDeveloper 10g (10.1.3) Prev

I'm having a problem on Adding Custom JSF Components to Oracle JDeveloper 10g (10.1.3) Preview (http://www.oracle.com/technology/products/jdev/101/collateral/101/adffaces/howto_customcomponents.html)
The step 1 of 5 isn't visible for me and I don't see the "Install from local file" option to select the adf-faces-bundle.zip from my file system. The OTN check for updates don't prove the ADF Faces...
What may I do?

And...
If "Check for Updates Wizard" is not launched, you can try to set LANG.
see: 10.1.3 Can't not launch Update Wizard in Japanese environment.
10.1.3 Can't not launch Update Wizard in Japanese environment.
Thanks.
Takuya Ono

Custom table can be displayed and not maintainable using SE16n.

Hi Gurus,
I have created a custom table with DATA BROWSER/TABLE VIEW MAINT. equal to 'N' (Display/Maintainance not allowed) in SAP ECC 6. The the requirment is, this custom table can be displayed using the transaction SE16n.
This requirement is existing in ECC 5. with same setting DATA BROWSER/TABLE VIEW MAINT. equal to 'N' (Display/Maintainance not allowed) and this table can be viewed using transaction SE16n.
would there be possible that this requirement be implemented in SAP ECC6? would this be due to the version?
Please help.
Thank you..
Regards,
SAI

Hi Kiran,
Thanks for your answer but unfortunately this is not what I'm looking for. Iam also familiar with &SAP_EDIT.
Well, my problem is, the custom table setting Data browser/Table view Maint. is set to "N Display / Maintainance not Allowed" ( under Delivery and Maintainance Tab). Also there is no table maintainance generator setup.
So basically with this setting, in transaction SE11 'Contents' is disabled. And with transaction SE16n, when you execute and tried to view the table, error "You cannot display zcustom_table with standard tool". (checkboxs are hidden)
What the requirement is looking, the custom table can be viewed (this is with the same setting above but can be viewed using SE16n and the checkbox maintain entries is automatically tick but when executed "auth failed" so, basically to view the entries, untick the checkbox then entries can now be viewed.)

Problem while saving date field in custom table

Hi,
Iam facing the following problem while saving a date field in custome table
i have a date field zdate in which the value is 02082010.
now when i try to insert this value in the custom table it is getting updated as 20/10/0208 , but it should be 08/02/2010
How can i correct it..
Regards
Kumar

just before saving u might have to use a string reverse FM and then save it..
CALL FUNCTION 'STRING_REVERSE'
EXPORTING
    STRING          = p_string
    LANG            = sy-langu
IMPORTING
   RSTRING          = r_string
EXCEPTIONS
   TOO_SMALL        = 1
   OTHERS           = 2

Issue when few fields were added to a custom table

Hi,
We have added some new fields to the existing database table(Customize). One of the fields is POD_date (data element- sydatum).
When we look for entries in table with condition POD_DATE EQ '00/00/0000' or space it gives fewer entries. In place it has to give 18k old entries with 00/00/0000 which it doesnt. Ideally it should have done '00/00/0000' for all older records as there wasnt field at that time. When fetch without above condition it gives 18k records with field in POD (00/00/0000) but when same thing is given in selectioon criterion it gives fewer.
Regards
Mohinder
Edited by: Mohinder Singh Chauhan on Dec 14, 2009 1:26 PM

Dear all,
I encounter quite the same problem :
We added an include to the table EKKO containing several fields such as ZZTYPC.
The initialization flag was not set at creation time so the new fields were populated with the NULL value.
We would like now to initialize the value for all the records of the field ZZTYPC to avoid problems when we use this field as a selection criteria in Tx SE16.
As suggested in the previous post, I checked the initilization flag for this field at the structure level (Dictionary : Display structure), save & activate but the modification is not carried over the table EKKO : the "initial values" check box stays unchecked for the field ZZTYPC thus the adaptation of EKKO is useless.
We use DB2 as database.
You help would be appreciated.
Best Regards,
Olivier

Adding Custom Fields to FAGLFLEXP Table

Hello,
We have a requirement to update WBS Element for Planning related Data. So have added custom field(WBS Element) in structure CI_FAGLFLEX04.
The field is visible when I open FAGLFLEXP table, but when I post data The custom field (WBS Element) is not being updated. Could you please let me know the process to update this field?
Thank you in advance.

Hi.
The procedure isn't so simple. There are several posts on the subject SCN. I suggest research before you start developing.
Start here:
https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
However, the most important is: a) Is it really necessary to change the standard? b) There could be a Z table containing the new information and referencing FAGLFLEXP? c) What is the transaction that will keep the data? It has Exit´s for what you need?
As Vadamalai said below,
Actually your approach may be wrong, first as an ABAPer should ask to functional team, which transaction and where to insert the fields, it could be header or item level(I am saying example)
Based on tcode, you need to enhance the table level as well as the screen exit/BADI we need to pass screen to internal programming structure. the structure type will be table type of FAGLFLEXP.
Regards.
Douglas

Problem in adding custom table's field in MM46

Similar Messages

Maybe you are looking for