Tuxedo XA connect to oracle 10g Failed
env:
SUSE 10 entriprise server
tuxedo 9.1 no patch
oracle 10.2.0 for linux(I dont know 32 or 64 bit)
tuxedo\udataobj\RM:Oracle_XA:xaosw:-L${ORACLE_HOME}/lib ${ORACLE_HOME}/precomp/lib/cobsqlintf.o -lclntsh
buildtms -o TMS_ORA10g -r Oracle_xa
ubb OPENINFO="ORACLE_XA:Oracle_XA+Acc=P/lbas/lbas11+sqlNet=lbas+SesTm=100+LogDir=.+MaxCur=5"
TMSNAME="TMS_ORA10g" TMSCOUNT=2
buildtms success,but tmboot say TMS_ORA10g assume started.
sqlplus lbas/lbas11@lbas no problem
question:why tmboot Ora10g proc failed,how to check?
Please try posting this in the Tuxedo forum:
Tuxedo
Similar Messages
-
ODBC Error while Siebel Server try to connect to Oracle 10G
We have managed to get through with the configuration of siebel server on HP Unix. However before we get to the Database configuration, we are encountering errors with ODBC connection to oracle 10g database. We are able to connect to oracle using sql plus but odbc connection is failing. We verified for patches, missing files, directory access rights - but no clue as of now.
Our error says:
Logging into "ENTSIA_DEV_DAN" as "sadmin"....
/user/lib/hpux32/dld.so: Unable to find library 'libclntsh.so'.
ODBC error IM0003 in SQLConnect:
(DataDirect){ODBC lib} specified driver could not be loaded
Unable to login using specified odbc parameters
This has become a show stopped for us and we are strugging with this for the past three days without much direction.
Any help is greatly appreciated.
Thanks.Hi,
I guess your DataDirect Driver which gets registered during Database Configuration has some problems.
Can you check whether the DSN is using the proper Driver?
Also, the username through which you are logging in to start Siebel Services must have proper rights.
Many times on Windows platform i have noticied this error in ODBC due to improper user rights. If the rights are not proper, the DataDirect Driver fails to get loaded & throws similar error.
Regards,
Shalabhsneha -
Can't Create the ODBC connection for Oracle 10g
Hi,
I am working with Oracle 10g Database Release 2 in windows XP professional. I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
system error code 998
could not locate the setup or translator library
Please help me how can I solve this problem and create the ODBC connection for oracle 10g database.
Best Regards,mwz wrote:
I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
system error code 998
could not locate the setup or translator libraryThe symptom described is typical of an incorrect system env PATH setting (used by the data source admin tool), compared to that of the Oracle Home (specifically, path $OH/bin). The odbc driver config routine will search directories listed in PATH variable for necessary libraries (Client dll's). If some library fails to load (from e.g. oraoci*.dll or oraclient10.dll) it will probably error out, as in your case.
Are you creating the odbc dsn on the databse server host or on some other machine? I.e. are you using the db host as a client or not? -
Web application not able to connect to Oracle 10g
I have been facing an issue with my Web application past 2 days wherein
I am not able to connect to oracle database. The error is receive when I compile my project : OCIEnvCreate failed with return code -1 but error message text was not available. I have defined my connection in web.config and calling it using a connection string
Details: os : window7 (64bit) .NET framework 4 Oracle 10g 32 bit can you please help me and provide me with a sHi,
My Question is related to Microsoft visual studio (.Net Framework).
Issue: My Application build in Asp.Net is not able to connect to Oracle 10g database (32 bit). My OS is 64 bit in which my visual studio2010 is Installed.
Thanks
Error:
OCIEnvCreate failed with return code -1 but error message text was not available.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: OCIEnvCreate failed with return code -1 but error message text was not available.
Source Error:
Line 28:
Line 29: OracleConnection con = new OracleConnection(connStr);
Line 30: con.Open();
Line 31: str = "select count(1) from ITS_INCIDENT";
Line 32: com = new OracleCommand(str, con); -
Problem to connect between Oracle 10g xe and VB2010 at Vista sp2
Introduction
Hi guys, good day... NEED RESCUE!! SOS!! Hmm.. i have trouble been 1 weeks trying connect between Oracle 10g xe and VB2010 on window vista sp2. Actaully im very new at Oracle 10g xe and VB2010 but i got a project is going to build up system database and i figure out Oracle 10g xe and VB2010 can use free so i just chows these appication to be my project. I been search around internet and there is several things i was found about the connection but i has try and tried still it wont work out.
Things i found and learned
Oracle
1. I have download Oracle 10g XE and installed in my windows vista sp2.
2. I notice the Oracle Developer Tools is needed for VB2010 (To add reference 'Oracle.DataAccess'). So i was downloaded ODT11beta and installed
3. I also edit TNSNAMES to following below:
OraDb =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
4. My sqlnet like following below:
SQLNET.AUTHENTICATION_SERVICES = (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
5.I have try tnsping OraDB and its works.
6. I monitoring task manager and OracleServicesXE is running.
7. ora_dba is added in Group.
Problem in SQLPLUS
When i try connect SQLPLUS in cmd i get ERROR: ORA-12560: TNS:protocol adapter error.
i . In cmd i type sqlplus and enter then i been ask for username and password.
ii. After i insert my username and password and enter then i get the error of ORA-12560.
Visual Basic 2010
1. First i created my project, drawing label and button for test connection.
2. Then, i add reference Oracle.DataAccess into my project.
3. I type following script into my vb form:
Imports System.Data
Imports Oracle.DataAccess.Client
Imports Oracle.DataAccess.Types
Public Class Logon
Private Sub cmdLogon_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdLogon.Click
Dim oradb As String = "Data Source = OraDb; User Id = system; Password = shin;"
Dim conn As New OracleConnection(oradb)
conn.Open()
Dim cmd As New OracleCommand
cmd.Connection = conn
cmd.CommandText = "select SName from Staff where SName = shin"
cmd.CommandType = CommandType.Text
Dim dr As OracleDataReader = cmd.ExecuteReader()
dr.Read()
lblOra.Text = dr.Item("SName")
conn.Dispose()
End Sub
End Class
Problem in VB2010
When i run my project and press the button i get error message ORA-12514: TNS:could not resolve the connect identifier specified at conn.Open()
Extra Question*
1. Im notice in my netbook xp home sp2, before i install ODT11beta my sqlplus look fine thought cmd but after i installed ODT11beta its same problem with my Vista sp2 now. Get error ORA-12560: TNS:protocol adapter error :( I tried uninstall ODT11beta again and restart its work fine again. Which i really dun understand. Izzit the version ODT11 is not suitable for 10g xe? And i dunno this problem is related with my connection between oracle 10g xe and vb2010 or not. So confuse@@
2. I wish to know more about connect between Oracle and VB, is there still a things i miss?(I mean steps or configuration that should i done)
3. Or i just lower my VB version could make more easy? If yes, what version VB should i use that could work out with oracle 10g xe?
4. Sorry for too bad my english but i really wish somebody could help me. Please try to understand my written or you could ask me mean if dont understand. Im stuck!! Stuck feel not really that good.....
Edited by: user9173084 on Jul 19, 2010 3:34 AMHuhu..
Yo, henry
I thought the OraDb is just a name for entry but im not sure it is a service. I was refer http://www.oracle.com/technology/pub/articles/cook-vs08.html at topic Connection Strings and Objects.
Here is my lsnrctl service
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOW has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOW has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 state:ready
DISPATCHER <machine: SHIN-PC, pid: 1932>
(ADDRESS=(PROTOCOL=tcp)(HOST=shin-pc)(PORT=49158))
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "xe" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully
Izzit ok? I notice there is no listed OraDb. but tnsping OraDb seem fine.
Actually there is somethings as a newbie i wondering long time alreadly ><
1. The origin of tnsname.ora is no OraDb or ORCL but i just simple add it by open tnsname.ora with notepad. Im just not sure it is function or not.
Also please check at my TNSNAME.ORA:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
OraDb =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
I got the feeling there is so close~~~!!! -
Error while connecting to oracle 10g data base
Following is the code we used to connect to oracle 10g data base using symbian 7.1 series 80 SDK
int CTest_S80AppUi::SetupODBC(void)
RETCODE rc;
char *DataSource = OD_DATA_SOURCE;
char UserId = "system", Password = "manager";
rc=SQLAllocEnv(&Henv);
//if (TEST_CHECK_ERR(SQL_NULL_HSTMT, rc, "SQLAllocEnv", FALSE) < 0) return(-1);
rc=SQLAllocConnect(Henv, &Hdbc);
//if (TEST_CHECK_ERR(SQL_NULL_HSTMT, rc, "SQLAllocConnect", FALSE) < 0)
//return(-1);
rc = SQLConnect(Hdbc, (unsigned char *)DataSource, SQL_NTS,
(unsigned char *)UserId, SQL_NTS,
(unsigned char *)Password, SQL_NTS);
bConnected = TRUE;
//if (TEST_CHECK_ERR(SQL_NULL_HSTMT, rc, "SQLConnect", FALSE) < 0) return(-1);
SQLAllocStmt(Hdbc, &Hstmt);
//if (TEST_CHECK_ERR(SQL_NULL_HSTMT, rc, "SQLAllocStmt", FALSE) < 0) return(-1);
return (1);
} /* SetupODBC */
iam getting the return code for SQLConnect as -1.
Thanks in advance.Thanks for the reply.
//syntax means comments.
chk the following code.
int SetupODBC(void)
char *DataSource = "polite";
char UserId = "system", Password = "manager";
if ( SQLAllocEnv(&Henv) < 0 )
return -1;
if ( SQLAllocConnect(Henv, &Hdbc) < 0 )
return -1;
if ( SQLConnect(Hdbc, (unsigned char *)DataSource, SQL_NTS,
(unsigned char *)UserId, SQL_NTS,
(unsigned char *)Password, SQL_NTS) < 0 )
return -1;
if (SQLAllocStmt(Hdbc, &Hstmt) < 0 )
return -1;
return (0);
As said earlier there is a problem in SQLConnect. It is returning -1.
But the code should return 0 if successfully connected.
The info regarding the arguments used in the above methods:
HENV Henv; /* Handle to ODBC Environment object */
HDBC Hdbc; /* Handle to ODBC Connection object */
HSTMT Hstmt; /* Handle to ODBC Statement object */ -
Need help w. connecting to oracle 10g express
I have been having extreme difficulty with connecting to oracle 10g express edition. what do I put in at the SQL > prompt to access sql plus? Are there first some env. variables which I need to set? Sorry for the basic "newbie" question about this.
what do I put in at the SQL > prompt to access sql plus?You may trySQL> conn / as sysdbabut don't use this one for your application data, create your own user(s) instead.
Are there first some env. variables which I need to set?Depends... what's your operating system, and are you running sqlplus from SQL command line or from OS prompt ? -
Using Java + WEBDAV to connect to Oracle 10g Repository
Hi,
I could not connect to Oracle 10g Repository with WEBDAV protocol. I thought that Oracle should provide a client library to help Java application to connect to Repo but I could not find it out.
Could you please show me how to connect to Repo with WEBDAV protocol?
It's better if giving me some examples.
Thanks a lot.Hi,
Did you succeed??
I am also searching for an example.
Regards,
Romano -
Shared services 9.3.1 configuration to connect to oracle 10g xe fails
I am trying to install Hyperion shared services on Windows XP media center. I have Apache Tomcat running as localhost and Oracle 10g express edition running as database. When I try to install hyperion shared services, the installation process goes well until database configuration details.
I can see my server name, Port: 1521. Then I have a table with other details
Product SID User Name Password DataTablespace Index Tablespace.
I enter the password used to connect to oracle database as "admin" in shared services.
User Name = hypuser
SID = hypdb
Product = Hyperion
Then I click next. I keep receiving this error message " Unable to connect to the database for product hyperion shared services".
Can some one tell me what the problem is?
Backuperror notepad shows: System error 1060 has occurred.
The specified service does not exist as an installed service.
Thanks.Hi,
First of all "Windows XP media center" is not an officially supported O/S so you may experience issues.
Before you configure the database you will have you have created a schema for HSS in Oracle, for example if you created a schema called HSS with password of hyperion then the connection details will be
SID : XE
username : HSS
password : hyperion
The SID is usally XE by default on oracle express editions.
Cheers
John
http://john-goodwin.blogspot.com/ -
Connection to Oracle 10g database failing
Not sure if I should post this here or on another newsgroup, but I am having a problem trying to connect, using WebLogic Server 9.2, to an Oracle 10g database (10.2.0.2), that has been upgraded from Oracle 9i.
I can connect to the same database using WebLogic 7.0.2, and I can also connect using WebLogic Server 9.2 to an Oracle 9i database.
I keep getting the 'Authentication denied: Boot identity is not valid' error, but I know that the username/password I am using in the boot.properties file is valid, because I have connected to the same database using WebLogic Server 7.0.2.
I suspect that the error could be with the drivers I am using, but I have checked and I have the latest oracle jar file in the WL_HOME/server/lib directory.
I did previously have a version of WebLogic 7.0.2 on the machine but this was deleted.
On the database in question the listener logs show that a connection was established, but that's it.
Any help would be greatly appreciated.Simon Kearn wrote:
Not sure if I should post this here or on another newsgroup, but I am having a problem trying to connect, using WebLogic Server 9.2, to an Oracle 10g database (10.2.0.2), that has been upgraded from Oracle 9i.
I can connect to the same database using WebLogic 7.0.2, and I can also connect using WebLogic Server 9.2 to an Oracle 9i database.
I keep getting the 'Authentication denied: Boot identity is not valid' error, but I know that the username/password I am using in the boot.properties file is valid, because I have connected to the same database using WebLogic Server 7.0.2.
I suspect that the error could be with the drivers I am using, but I have checked and I have the latest oracle jar file in the WL_HOME/server/lib directory.
I did previously have a version of WebLogic 7.0.2 on the machine but this was deleted.
On the database in question the listener logs show that a connection was established, but that's it.
Any help would be greatly appreciated.Can you show me the pool definition, and the whole stack trace of the
exception?
Joe -
Client unable to connect to Oracle 10g on linux
I have installed Oracle 10g on an Intel box running RedHat AS 3.0. The database installation was succesful but I am unable to connect to it from the client on my laptop running Oracle 10g client and Winfdows XP Pro. The server ip is 192.168.1.10 and I can ping it from the client:
C:\>ping attila.n3kje.net
Pinging attila.n3kje.net [192.168.1.10] with 32 bytes of data:
Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.1.10:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Here is some info about the 2 environments:
[oracle@attila bin]$ uname -a
Linux attila.n3kje.net 2.4.21-9.0.1.ELsmp #1 SMP Mon Feb 9 22:26:51 EST 2004 i686 i686 i386 GNU/Linux
Server hosts file
======================================================
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 attila.n3kje.net attila localhost.localdomain localhost
hostname output
======================================================
[root@attila root]# hostname
attila.n3kje.net
ifconfig output
=======================================================
[root@attila root]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:C0:9F:1D:0C:C8
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:13772171 errors:0 dropped:0 overruns:0 frame:0
TX packets:13748842 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1269613311 (1210.7 Mb) TX bytes:4065314800 (3876.9 Mb)
Interrupt:16 Base address:0xecc0 Memory:fe100000-fe120000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5513840 errors:0 dropped:0 overruns:0 frame:0
TX packets:5513840 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:865454291 (825.3 Mb) TX bytes:865454291 (825.3 Mb)
Client TNSNAMES.ORA
======================================================
# tnsnames.ora Network Configuration File: C:\Oracle\product\10.1.0\Client_1\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLE10G =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DEV10G)
PRDSRR =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = dev10g)
Client SQLNET.ORA
======================================================
# sqlnet.ora Network Configuration File: C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES)
Server TNSNAMES.ORA
======================================================
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
etwork/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DEV10G =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = attila.n3kje.net)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DEV10G)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Server LISTENER.ORA
======================================================
# listener.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
etwork/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = attila.n3kje.net)(PORT = 1521))
Results from the TNSPING command issued at the client
=================================================================
C:\>tnsping prdsrr
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 02-APR-2
004 09:26:11
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = 192.168.1.10)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = dev10g)))
TNS-12541: TNS:no listener
C:\>tnsping oracle10g
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 02-APR-2
004 09:26:38
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = 192.168.1.10)(PORT = 1521))) (CONNECT_DATA = (SERVER = DEDICATED) (SERVI
CE_NAME = DEV10G)))
TNS-12541: TNS:no listener
C:\>
Trying to connect to the database from the server
==================================================
[oracle@attila bin]$ echo $ORACLE_SID
DEV10G
[oracle@attila bin]$ ./sqlplus system
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Apr 2 12:22:29 2004
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Pr
oduction
With the Partitioning, OLAP and Data Mining options
[oracle@attila bin]$ ./sqlplus system@dev10g
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Apr 2 12:23:09 2004
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
tnsping issued at the server
======================================================
[oracle@attila bin]$ tnsping dev10g
TNS Ping Utility for Linux: Version 10.1.0.2.0 - Production on 02-APR-2004 12:3
:44
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/10.1.0/db_1/network/admin/sqlnet.ora
TNS-03505: Failed to resolve name
What am I doing wrong?
Thanks
RenatoOk, I was able to succesfully connect to the database from the client. I made the following changes to the sqlnet.ora, tnsnames and listener. Here are the changes I made:
sqlnet.ora
==============================
# SQLNET.ORA Network Configuration File: /u01/app/oracle/product/9.2.0.1.0/netwo
rk/admin/sqlnet.ora
# Generated by Oracle configuration tools.
# NAMES.DIRECTORY_PATH= (EZCONNECT)
NAMES.DIRECTORY_PATH= (EXCONNECT, TNSNAMES, ONAMES, HOSTNAME)
listener.ora
==============================
# listener.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
etwork/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = DEV10G)
(ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
(SID_NAME = DEV10G)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
tnsnames.ora
===========================================
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
etwork/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DEV10G =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = DEV10G)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Here is the new problem!
I start the dbconsole using the folowing command:
[oracle@attila bin]$ ./emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://attila.n3kje.net:5500/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................
... started.
Logs are generated in directory /u01/app/oracle/product/10.1.0/db_1/attila.n3kje
.net_DEV10G/sysman/log
When I try and access it from the client I get the following error message:
"The database status is currently unavailable. It is possible that the database is in mount or nomount state. Click 'Startup' to obtain the current status and open the database. If the database cannot be opened, click 'Perform Recovery' to perform an appropriate recovery operation."
What am I doing wrong this time?
Your help would be greatly appreciated
Thanks
Renato -
Not able to connect to Oracle 10G server
Hi All
I have installed Oracle Clinet 10G and i am able to connect to oracle server using sql plus, but not through Microsoft OLEDB data provider for Oracle.
Error : Test Connection Failed because of an error initializing provider, oracle error occured,
but error message could not be reterived from Oracle.
also before installing Oracle clinet i have SQL Server 2005 and 2008 client in my system.
How can i connect with oracle server using Microsoft OLEDB data provider for Oracle.
How would i know what excatly is the issue?887065 wrote:
Hi All
I have installed Oracle Clinet 10G and i am able to connect to oracle server using sql plus, but not through Microsoft OLEDB data provider for Oracle.
Error : Test Connection Failed because of an error initializing provider, oracle error occured,
but error message could not be reterived from Oracle.
also before installing Oracle clinet i have SQL Server 2005 and 2008 client in my system.
How can i connect with oracle server using Microsoft OLEDB data provider for Oracle.
How would i know what excatly is the issue?does listener.log file record connection request got that far?
consider using WireShark or Ethereal to packect sniff the data exchange between MS client & Oracle listener/DB -
Facing issue in Connecting to Oracle 10g database in OBIEE+
Hi All
I have done the BASIC installation of OBIEE+ on Windows [local system].
I have tested for all the services running and they are running fine.
As Oracle 10g is our databse i need to connect to the databse.
Please guide me with step by step process on how to establish the connection.
I went through the tutorail but still failed to establish the connection.
Thanks in advance,
Regards,
Veena A
Edited by: user10511722 on Dec 14, 2008 11:40 PMAs John says you need some sort of Oracle client to connect to the database.
I use instant client, with ODBC options, and SQLPlus (to test connectivity)
Available here
http://www.oracle.com/technology/tech/oci/instantclient/instantclient.html
You will also need to copy your tnsnames.ora into the directory you install in, and set the TNS_ADMIN environment variable to point to it. -
Connect to Oracle 10g on a 64-bit machine
I have 64 bit Windows Server 2003 with Oracle 10g 64 bit Database Installed. I have 32 bit application installed on the same machine but the application cannot connect to the database. I tried to use Excel to test and here is the error message:
Test connection failed because of an error in initializing provider. Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.
If the 32 bit application is installed on 32 bit machine, the application can connect to 64 bit Oracle Database. Need help on this.Hi,
I have 64 bit Windows Server 2003 with Oracle 10g 64 bit Database Installed. I have 32 bit application installed on the same machine but the application cannot connect to the database. I tried to use Excel to test and here is the error message:This means the Excel is installed in the on the same 64-bit machine? The Excel software is 32-bit or 64-bit?
The database is connecting from the local SQLPLUS from the command prompt?
Regards,
Vijayaraghavan K -
Max Connections to Oracle 10g RAC Instance
Hi,
We have IBM Websphere Application Server on one unix server which is connecting to a Oracle 10g RAC Instance which is on a different unix server through JDBC connection. They(Application Team) are doing stress tests, please tell me how many connections can a Oracle Database Allow simultaneously. They tested for 2000 connections simultaneously. It failed...This is urgent, they are on call please reply ASAP
Thanks,Use Oracle Shared Server (the default is Dedicated Server),
I've shown JBOSS app developers how a little Dell desktop (256MB RAM, 1.7Ghz P4) can accept a 1000 app server connections (using Shared Server). While a big HP-UX server failed to accept 200 connections (using Dedicated Server).
Oracle RAC should easily be able to handle 100+ concurrent client OLTP connections per RAC node using Shared Server - assuming that each of the concurrent sessions are actually doing stuff and not just sitting there idle. (if 99.99% of the connections are idle, then even a little desktop Oracle database can handle well over a 1000)
Bottomline - you must have your primary focus and expertise on Oracle. On the the data tier. Not the app tier. The data tier is what scales the app tier. Not vice versa. Adding an extra app tier server does not enable the data tier platform to suddenly be able to run more SQLs, The app tier does not scale the data tier.
If you want performance and scalability, you must get the data tier right. App tier be damned as that is neither here nor there ito performance and scalability. This means Oracle expertise is required first and foremost.
Maybe you are looking for
-
Time Out Functionality in APEX
Currently I am working on APEX 3.1 and using OID (10.1.2) for LDAP Authentication. I want to implement time out functionality in my application. Ex: If users logs into to APEX Application and keeping the page ideal for 15 min. When user tries to acce
-
Jdeveloper WS proxy error while invoking web service deployed on weblogic
Hello experts, can you please help me. I have web service deployed on weblogic server. I have not set any credential for this web service. I can test the service from SOAPUI without providing any credentials. Then I generated WS proxy client using Jd
-
Download link for older version of Lightroom?
I own a product key for Lightroom 4. I had to restore my operating system today and now need to re-download Lightroom 4. Where can I get a download file for it?
-
While applying 12.1.3 upgrade patch
upgrading from 12.1.1 to 12.1.3. invtxhi.odf , apvin.odf failed with the errors I got the below error Adworker error unable to find existing index on the same columns adworker error unable to compare or correct tables or indexes or keys because of th
-
After encountering several errors in execution of a mapping I open the Run Time Audit Viewer to view them. Rather than displaying the column values of the offending source records, the column names are displayed in the value column. Has anyone seen t