TVARV ENTRY TO BE IMPORTED TO QAS

HI
I AHVE A CODE IN DEV
select single low into w_low from tvarv where name eq 'ZCUST_TABLE'.
w_table = w_low.
SET CURSOR field 'W_TABLE'.
THE TABEL IS TVARV AND I HAVE TO MAINTAINE IN QAS IN THE TABLE BELOW DATA BUT IT IS NOT ALLOWING ME TO MAINTIANE THIS DATA IN QAS
NOW WHAT TO DO
I AHVE TO MAKE THIS ENTRY IN QAS TABLE TVARV WHERE NAME = ZCUST_tABLE
IT WILL SELECT ZCUSTEMAIL FROM THAT TABLE BUT NOW I AM NOT ABLE TO MAKE ENTRY IN QAS WHAT TO DO TO TRANSPORT THIS VALUE IN THIS TABLE IN QAS
NISHANT

Re: Data Migration Part - Reg.
Regards,
Ravi

Similar Messages

UST12: not all entries moved during import

Hi there,
Today I faced the issue below.
When comparing a single role from Dev with QAS system via SUIM it showed that role in QAS does not contain some auth objects whereas they existed in PFCG/AGR_1251 (after transport was imported into QA). As far as I know SUIM uses UST* tables for reporting. I checked UST12 table (the only UST* table the transport consisted of) and found that indeed some objects were missing for certain profiles.
transport logs for Import phase into QA showed entries like that:
3 entries for UST12 imported (100V_VBAK_AATT-ED78820508A*).#
0 d /   0 i /   0 u /   4 = 100% ucf UST12 #
4 entries for UST12 imported (100V_VBAK_VKOT-ED78820508A*).#
3 entries from UST12 (100V_VBRK_FKAT-ED78820500A%) deleted.#
0 entries from UST12 (100V_VBRK_FKAT-ED78820500A%) deleted.#
0 d /   0 i /   0 u /   3 = 100% ucf UST12 #
3 entries for UST12 imported (100V_VBRK_FKAT-ED78820512A*).#
3 entries from UST12 (100V_VBRK_VKOT-ED78820500A%) deleted.#
0 entries from UST12 (100V_VBRK_VKOT-ED78820500A%) deleted.#
0 d /   0 i /   0 u /   3 = 100% ucf UST12 #
3 entries for UST12 imported (100V_VBUK_FRET-ED78820510A*).#
8 entries from UST12 (100ZERU_BUKRST-ED78820500A%) deleted.#
0 entries from UST12 (100ZERU_BUKRST-ED78820500A%) deleted.#
Newer transport that changed other objects of this role did not contain "deleted" entries in transport log for UST12 table, only "imported' ones. After moving this to QA, UST12 was "synced" with AGR* and SUIM comparison report works as expected.
What is a reason for TMS to not import all entries for UST12 but to delete some?
I tend to think this could happen again and confuse those people using SUIM for security changes controls in our organization.
I checked recent notes regarding SUIM reports but it looks like they have been implemented already.
Thanks in advance,
Igor

>
Igor Kustov wrote:
> {quote
> > Hi,
> > possibly changes have been performed to the role in DEV after it had been inserted into the transport. In contrast to normal transports role transports behave a bit different at the moment. Only after you have finished your changes and generated the profile you should insert the role into a transport
>
> As far as I understand during transport release it takes current "snapshot" of the tables for Roles/profiles, so any changes made to the role after transport was created but until released   would be put into that request, right? This seems proved to be true as PFCG/AGR_1251 contained correct values in QAS. So, the problem is that during release of transport not all needed tables related to user/role management are "pictured" and put into the request i.e. some tables (UST*) are "pictured" only when role is being put into request, correct?.
This is a common rumor......
Please read: https://service.sap.com/sap/support/notes/571276
Ther exists already 1 discussion about this fact in this forum....
>
>
> > As per your description it would have been sufficient, to generate the profile in QAS to have the current profile again. At generation the AGR_data is put into the USR/UST*-tables.
>
> Well, when changes to the role are moved new profile is generated automatically in the target system, therefore values from AGR* should populate UST* tables? Or I am missing something..
Well only, if you use the procedure mentioned above.
US*-table content is only created when generating the profile. So if you have more data in AGr-tables, the profiles are not actual.
b.rgds, Bernhard

Read TVARV entry in process chain

Hi BW Gurus,
I have an infopackage in which the accounting period is one of the selection conditions. What the accounting period is at any particular point in time is dependant on an entry in TVARV table. So in my process chain, I have to read TVARV and use that in the infopackage selection criteria and pull only for the accounting period that is in TVARV table. Can someone tell me how I can do this in my process chain???
Thanks
SRD.

Hi Arno,
So are you saying that I read TVARV, assign it to a variable and whenever the accounting period of a particular record is NOT EQUAL TO TVARV Entry then RETURNCODE <> 0 so that the record is not updated. But in start routine you do not have RETURNCODE , you can only do ABORT. So what would happen is whenever a data package has a record with acct period not equal to current TVARV entry, then the whole data package will ABORT. even though there are other records whose acct period = TVARV entry. Because the START routine executes for a data package and not for individual records.
Do you think my thinking here is wrong?? plz correct me if I am wrong.
Thanks for response
SRD

Assign Condition to check TR imported in QAS -Normal change(SMMJ) solman7.1

Hi ,
I am configuring Cutsomizied Normal change in solam 7.1 SP3 release.
After Original TR imported to QAS,i have set the status QAS import successsfull in ZMMJ.
Also i am trying to assign the Condition TR imported in QAS check, before status set to " QAS import successsfull".
But i am not able to find the condition for original TR relase. only import of copies have the condition check.
E0009 30 IMPORT_OF_COPIES_OK CHM1_ACTION_LOG 046 Cancel
Please help to find the condition.
Rg,
karthik

Hi,
SAP Note 1577453 is for Transport of Copies Import check.
But i am looking for original TR import check condition in QAS system after gave customizied action.
Rg,
Karthik

Can we mix mandatory and optional field entries for file import?

Can we have devices with mandatory fields only and some other devices with mandatory and optional fields within the same CSV file used for file import?

Hi Rita and Sandra,
That is correct, you can mix mandatory and optional field entries for file import. However, if you don’t have OS type and version, the alerts matching would be impacted.
Thanks,
June

ICal entries won't import (Leopard)

I just tried creating a calendar for printing using iPhoto 6 and discovered that I can't seem to import entries from iCal. I didn't have any trouble doing this last year, but since then I have upgraded to Leopard.
I'm wondering whether Leopard's version of iCal is incompatible with iPhoto 6.Has anyone else had this problem? More to the point, does anyone have a solution?

The best (only) workaround I've found so far is to boot 10.4 (Tiger) from a different disk in order to create the calendar.
There's also the possibility of using other calendar printing services, such as Snapfish in the UK, though I don't know how good their print quality is and whether they do the spiral binding.

Cannot find entry 'SOAP_DOC_LITERAL' when import PublicReportService wsdl

Hi,
when i when import PublicReportService_v11.wsdl from BIP 10.1.3.4.2, i get the following error msg:
Cannot find entry 'SOAP_DOC_LITERAL' in the bounded picklist for the field 'Protocol' in integration component 'Repository Port'(SBL-EAI-
04401)
I want to integrate BI publisher for Siebel 8.1.1.6 to generate a report.
I followed the following references:
http://docs.oracle.com/cd/E14004_01/books/Reports/ReportsIntegrate6.html#wp575974
http://siebel-essentials.blogspot.com/2010/01/siebel-811x-and-bi-publisher-part-1.html#axzz1vaWerxQa
Thanks

Hi, WSeibel
I followed the steps Doc ID 1076412.1,
it said
This problem was solved after defining in the Mobile Client view -> field "Language(s)" the language ENU and the other one being used.
Then the database was re-extracted and it was possible to import the WSDL in the local database using Tools.
but my issue is not solved well.
I decide to reinstall Siebel Tools now, and have a try again.
Thanks,
Zhaoqiang

Transport Error in Import at QAs

Hi mates,
I collected standard objects and transported from DEV to QAs but I received the following error message:-
Selection for Import - Completed
Import                - Completed
Check Versions        - Completed
Method Execution      - <b>ENDED with ERRORs</b>
Ended with return code: ===> 8 <===
Please advice

John
Just for FIAP- Transactional figures it should not take anything more than half an hour maximum. You are saying it's running since more than 12 hours so there must be some thing wrong.
1 Check How many objects you collected under one transport. Don't combine too many objects under one request. Collect only few objects in one transport
2 Check whether the job is still running or not. If it is running cancel the job and collect these objects again under new transport request and import that into Q system with Over write option so that it over writes if any objects already imported.
Hope this helps
Thnaks
Sat

Two Times TP need to be released for import to QAS

Dear All,
Once the Developmemt is completes, developer is releasing the task from the satellite system & after, the TP from the CHARM. Some times the TP is not getting released from CHARM in single action, so again we need release one more time. Why the system releases the TP after second effort. How can avoid this ?
regds,
Channabasappa

"Straight answers" will promptly be provided on or after June 6th... Sorry. The volunteers here have no such information, and the Palm agents cannot provide answers without losing their jobs.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

How to import a transport from an urgent correction into QAS again ?

Hi guys,
we're new in charm.
We have an urgent correction document, with 1 transport.
We've put the urgent correction in status "to be tested" so now the linked transport is imported into QAS system. But this was a little bit too soon :-s
I had to do some manual work on QAS before importing that transport.
Can I easily (or how can I do this at all) import that same transport again into QAS ?
kind regards,
David De Boel

Hi Guys,
We have implemented change request and upgraded for SP 15 support pack
when the user tries to import through urgent correction by selecting pass correction to test the TP is not getting imported, when i checked the log it is saying
System cancel RFC destination SM_BQ2CLNT100_TRUSTED, Call TMW_SET_PROJECT_SWITCHES: No authorization to logon as trusted system (Trust ed RC=2).
You cannot import any requests for project BD2_P00001 at the moment
Then i went to show project status switches and changed as "Request can be imported" from " request cannot be imported", then the user is able to import the UC from the task list,
But ideally the status switches should be " request cannot be imported" so that the TP can be imported only through change request.
kindly give ur inputs as it is very urgent.
Regards
Raju

How to Simultaneous import of a request into two clients in QAS

Hi All,
We've implemented ECC 6.0. Our landscape is like:
Development 100 -
QAS 200 -
QAS 250------Production 400
We've a requirement to Simultaneous import into QAS 200 & QAS 250.
How can I configure TMS to import automatically one order in QAS 200 and 250 without any manual intervention?
Regards,
Mike

Mark
thank for your fast answer.
I follow tjis step:
1. Log on to client 000 of your TMS Domain Controller SAP Instance.
2. Go to transaction STMS.
3. On the Transport System Management screen, click Overview -> Transport
Routes.
4. On the Display Transport Routes screen, click the Display<>Change button to
toggle into Change mode. Click on the Target Groups line and click the
Create button.
5. In the Create Transport Group popup, fill in the Target Group as /XXXCLNTS/,
give a Short Description and click the Client Assignment button. Be aware
that the Target Group name must start and end with a u201C/u201D.
6. Enter each Target system and Target client you need. For our example, we will
DEV 100, QAS 200, and QAS 210. Click the green check mark to Transfer. You
now have a target group. Now you must create a Consolidation Layer.
7. Back on the Change Transport Routes screen, click on Transport Routes and
click Create.
8. In the Create Transport Route popup, click the Extended Transport Control
button at the bottom of the popup. Make sure Consolidation is "on" and fill
in the information using our Target Group as the Consolidation Target.
9. Click the green check button to Save the change.
But ,the the problem is:
I need to import orders individually, not through a JOB.
When I perform the QAS IMPORT via STMS transaction, the system requires one client. I seek is that no client request, ie the possibility of "ALL" or simply do not request a client and the import for the customizing order be made to all.
Thank in advance for yours help
Mike

TMS import stops working

Hi Gurus
We have been importing transports into qas client 200 without any problems, we then created client 300 in qas and when we tried to import the transports that were already in the queue, the import started hanging, i checked the logs and saw that the RDDIMPPDP job had been stopped unexpectedly and i restarted the job and i was able to import into 300. The following day i tried to import the remaining transports but it was no longer importing, there is nothing in the. There are no entries in the import History, and the import monitor is just showing that the import is running. Can anyone help me out, what might be causing this???

Hie Rishi Abrol
Thanks for your prompt response, The Logical system is defined for client 300.
I didnt understand when you said i should include the client 300configuratio and add the client 300 in the group, how do i do that?
Configuration was done on DEV in client 100, and we were using clint 200 in QAS to test now we have creted a client 300 for training purposes but now import stopped functioning, i canolonger transport even to 200, so is it possible so is it possible to copy using scc1 from client 200 when there was no configuration done there, if possible pliz help me how to go about it, thanks in advance

Missing entry in COFILE

I have a program to list transports both on our DEV system and released from DEV but still waiting for PRD import.
I found in COFILE the entry for the PRD target system when the request is imported. I use this to determine if the request is in PRD or not. The problem is, i have some transports that were released from DEV, imported into QAS, but deleted from the PRD import queue. I cannot find an entry for this in COFILE, nor can i figure out how to determine that the request was deleted from the PRD import queue. It shows that it has if i look at a standard transport log, but it does not show in the COFILES.
I am using STRF_READ_COFILE to gather the COFILE data.
Does anyone kow how i can determine programmaticaclly if the request was deleted from a specific import queue?

I found the answer myself. The entry was in COFILE al along. i was just looking at it incorrectly.

Excise base amount for Import PO in MIGO

Dear All,
I have create the Import Po and maintain all conditions i.e.JCDB,JCV1,JECV,J1CV,JEDB,JSDB,JADC and assign the custom vendor to conditions and make the custom payment through MIRO for planned delivery cost.
Then while doing the MIGO with referance to PO and commercial invoice,all duties are captyring correctly but excise base amount is showing base amount plus basic custom duty.Please give the solution is any setting missing in costomizing.
And in MIGO item screen BED %(CVD%) is not showing but AED,ECSS,SECESS is showing correctly.
Please give solution urgently.
Regards,
Vinay

hi
check following configuration
path: spro>logistic general >tax on goods movements>India >basic settings>determination of excise duty >maintain excise defaults >
if it is been done then check whole config as follows
TOTAL IMPORT CONFIGURATION AND CYCLE
in ur pricing u have to create following
JCDB IN: Basic Custom Duty
JCV1 IN : CVD
JECV IN : Ed Cess on CVD
J1CV IN : H&SECess on CVD
JEDB IN : Ed Cess on BCD
JSDB IN : H&SECess on BCD
JADC Additional Duty of Custom
JCV1, JECV, J1CV and JADC will go to Excise MODVAT Accounts and JCDB, JEDB and JSDB will get loaded on inventory.
In M/06, for all above conditions, keep following controls;
Cond. class A (Discount or surcharge) Plus/minus A (Positive)
Calculat.type A (Percentage)
Cond.category B (Delivery costs)
Activate "Currency Conversion" and "Accrual"
Now for setoff
maintain the following conditions in excise default settings.
JCV1, JECV, JADC
path: spro>logistic general >tax on goods movements>India >basic settings>determination of excise duty >maintain excise defaults >
along with ur tax procedure maintain these conditions in the specified fields
JCV1 in CVD condition field.
JECV in ECS condition field.
JADC in ACD condition field.
in case of SECess on CVD, no need to maintain.
it is hardcode in the standard
Vendor in GR 2 (Entry always possible)
Import scenario
1.Create material master of import goods.
2. Create vendor master record of import vendor and Customs clearing vendor.
3. Maintain CIN settings.
4. Maintain J1id.
5. Maintain Pricing procedure SAP standard JIMPOR.., maintain required conditions..JCDB, JCV1...
6.Assign the schema to respective import vendor in purchasing view of VMR.
7. Create import PO, check in conditions of JCDB, JCV1 the customs clearing vendor(Indian vendor) and percentage is assigned. This can be done by In condition tab select condtion then click on display, then enter.
Save the PO.
8. MIRO --Capture Bill Of Entry.(Commercial Invoice No.,).Customs clearing first .Here CVD will b converted to BED.
9. Capture Excises invoice--j1iex.
10.MIGO.
12.Post Excise Invoice.
13.MIRO...Payment to vendor(import vendor)

Can you customize iCal to show only one kind of Entry. Work vs Home?

I use iCal for work and home..is there way to just view HOME and Work separately? Like a filter.
I don't want to see work stuff on the Calendar at home, since I have a ton of work stuff in my calendar, some of the personal entries get lost in my view.
So I'd love a way to see "HOME ONLY" entries.
I imported my Calendar information, synced it from Yahoo...so all the entries are CALENDAR..I'd like to convert them to Work or OFFICE in order to filter them.

Sorry, wrong forum...reposted to the Windows forum.

TVARV ENTRY TO BE IMPORTED TO QAS

Similar Messages

Maybe you are looking for