TVARV table

Hi,
I've a report where there is the field Year.
If I save a variant the next year system will propose 2011 when that variant will be manually selected.
I would like the system will update automatically the value of the year.
I don't know how to do that by TVARV table
Best regards

Using TVARV (TVARVC)
First create a periodic (daily) job (or ask basis to) that executes standard report RVSETDAT, this report will update some values in TVARV (and TVARVC on more recent versions) (*)
Then in your variant use variable RV_ACTUAL_YEAR (Read [Using Variables for Date Calculations|http://help.sap.com/saphelp_nw04s/helpdata/en/c0/98039be58611d194cc00a0c94260a5/frameset.htm] in [Variable Values in Variants|http://help.sap.com/saphelp_nw04s/helpdata/en/c0/980398e58611d194cc00a0c94260a5/frameset.htm])
Other solution
Fill the field with SY-DATUM(4) in INITIALIZATION block, and in the variant definition, check the box "Save field without values" (Read [Variant Attributes|http://help.sap.com/saphelp_nw04s/helpdata/en/c0/98038ce58611d194cc00a0c94260a5/frameset.htm] in [Variable Values in Variants|http://help.sap.com/saphelp_nw04s/helpdata/en/c0/980398e58611d194cc00a0c94260a5/frameset.htm])
Regards,
Raymond
(*) You could also create a copy of the program in your namespace (Zxxx, Yxxx, etc.) and maintain your own variable

Similar Messages

How to find out list of variants in TVARV table

hi!
can anybody can guide me on the following issues? plz
How to list all variants in TVARV table?
How to find out any Z* programs that writes to TVARV table, using the variant name?
How to find out the programs which are reads the TVARV data into a program variant?
Thanks & Regards,
vijay

Or some help might be useful:
http://help.sap.com/saphelp_47x200/helpdata/en/c0/98037ae58611d194cc00a0c94260a5/frameset.htm
Regards,
Subramanian V.

Sort the Data Selection in TVARV Table

hello...i wanted to run a SAP Standard Program and it is have a variant selection for me to select the variable from TVARV table. When this program run, I would like to have a selection of choosing the latest date to run the program based on the variant I save. I created a variables in the TVARV table but I cannot see any selection which can sort the selection based on the latest date. I can only choose to be EQ and etc. Is there any selection that I can make so that the program always choose to be run based on the latest date? thanksss alot!!!

Look at table VARID.
Rob

Defining Selection variables for program variant, TVARV table Help - urgent

Hi All,
Can anyone tell me, what is the transaction to create new variables in table TVARV to use them in my variant for fiscal year and WIP period fields in selection screen of SAPKKA07 program.I used STVARV and it creates variables in table TVARVC table not in TVARV table and moreover in creating a variant the selection variables are defaulted as variables from TVARVC table as input help but not the variables in TVARV table however I see and understand different from SAP Help. The following is the link
http://help.sap.com/saphelp_47x200/helpdata/en/25/c966398ae5c13ae10000000a114084/frameset.htm
for selection variable creation.
Can anyone help me on this this is very urgent. Your help is highly appreciated
Thanks in advance
Kumar

Thanks Appana,
I know we can create the variable that way but, that is something hardway to do it. I want to go about it from transaction not meaning to update the table directly and moreover if I update the TVARV table directly as u said I still dont see the variable I created in the list I get on input help for selection variables while creating a program variant.
I hope u can suggest me better now.
Thanks
Kumar

Update TVARV table entries using a Function Module or Program

Hi Gurus,
My requirement is that I have a entry in TVARV table which has a 'low'. We would like to change this value whenever we desire. We are unable to do it via sm30 and se16 as table maintenance access is not permitted in Production environment.
Can you please provide any Function module or program code to do it?
Requirement - User can enter a value into TVARV table by executing a function module or program
Thank you all, will award points,
Priyansh

Hi Priyansh,
Please refer to SAP Help for more information on variant maintenance and more specifically variable values in variants. You can use t/code STVARV for maintaining the variant variables in table TVARVC (Client-Specific Variant Variables).
Note: I suggest to use the TVARVC table instead of TVARV.
If you are looking for Function Modules in the area of Variant Maintenance, then please have a look at Function Group SVAR (t/code SE80).
If you are looking for Function Modules in the area of User Variables in Variants, then please have a look at Function Group SVUV (t/code SE80).
Furthermore, if you are looking for a program to update table TVARVC, please have a look at ABAP: Dynamic Variant Processing with STVARV.
Best eregards,
Sander

Creating Variable in TVARV table via SM30

Hi Gurus,
             I need to create a variable in TVARV to hold the last EXecution TIME and DATe of my program.
I did it earlier in Development , now when i have to create it again in Quality for testing, its not geetting displayed via se11.
                                                                                date         time
          I created the variable form SM30 -- Maintain-- 'ZZZ' --- 20081202_112309
         Now when i goto se11 and check for contents its displaying my variable.
Can anyone suggest where am i going wrong , or perhaps wats the best practise to create a VArable in TVARV Table.
         Your suggestions are Deeply Valuable to me..
Thanking you,
ZIa

Hi Zia,
Please use transaction code STVARV to maintain TVARV variables.
Regards,
Rahul

TVARV table entries

Hello folks,
I am just wondering how to code a select statement on a tvarv table with ranges.
To be clear, I had created a variable with name ZTEST and then I clicked on the YELLOW arrow on the right and entered 10 numbers from 1 to 10.
Now I have a report with a selection screen field 'p_num' and in that report I am coding the SELECT statement on tvarv in the following way.
select single *
from tvarv
into ls_tvarv
where name eq 'ZTEST'
   and low eq p_num.
Is this correct. p_num can have values anywhere between 1 and 10.
Will the above code work if p_num is 1 or 2 or 3 up to 10??
Please let me know.
Thanks,

Hi
Your record in TVAR it should be:
TVAR-NAME = 'ZTEST'.
TVAR-TYPE =
TVAR-NUMB =
TVAR-SIGN =
TVAR-OPTI =
TVAR-LOW   = 1
TVAR-HIGH = 10.
In your code:
DATA: MIN TYPE I, MAX TYPE I.
SELECT * FROM TVARV WHERE NAME = 'ZTEST'.
MOVE: TVARV-LOW TO MIN,
      TVARV-HIGH TI MAX.
EXIT.
ENDSELECT.
IF P_NUM < MIN OR P_NUM > MAX.
ERROR.
ENDIF.
Max

TVARV Table Variable Update

Hi All,
We have a requirement to add a new variable to the TVARV Table
I am able to do it thru SM30.
This variable is used in a variant in a program that runs periodically.
the new variant shd be similar to 1001_CURR_MONTH_START_DATE
now the month and the year shd change based on the fiscal period we are in.
The option I have found is to write a program to update the TVARV table and run this program before running the actual FI program.
But there are other variables that seem to be getting updated and I did not find any programs updating them,
So is there some other way that I can update the date in the variable other than the program approach
Appreciate your help.
Thank you
Lalitha

Best option is through program update , but one thing you need to do is change the TVARV table technical settings. you need to switch off the buffer i.e. select buffering not allowed. Then write a FM or program to update the entry.
Ex:
update tvarv
set low = value " your value
where name = name " your variable name
and type = 'P' " or 'S'
and numb = 0.
I am using the same solution ..
Regards,
Sunil

Is there any STD prog which update Table TVARV-Table of VAR in SEL Cre

Hi ,
Can any one tell me which STD program will be used to update the Table TVARV (Table of Variable in selection cretria ). Or this table should be updated manually ? .Please kindly let me know .
Thanks & Regards,
Veera

Hi Veera,
TVARV table has allowed maintanace status and Maintanace view is available for the same.
So go to transaction SM30 and maintance the Table as you required.
Thanks
Nimesh S. Patel

Delete a record in TVARV table

Hi All,
I want to delete a record in table TVARV, but the problem is that all the records that are present in TVARV table when i check from transaction SE16 are not present when i check throught transaction SM30 or STVARV.
If that record gets reflected in STVARV or SM30 then it will be very easy for me to delete it.
Kindly tell me as how to delete that record, from TVARV table,
Thanks a lot in advance.
Regards,
Nikesh Kumar

Hi,
The records are present in TVARVC table and not in TVARV.
You can delete them via transaction SM30. Deleting from TVARV will delete from TVARVC also.
Regards,
Ankur Parab

Purpose of TVARV table!!!

Hi,
Can anyone give me an idea on TVARV table??
the purpose and an example if anyone can give.
Thanks in advance for your reference.
Ramesh.

Hi Ramesh,
TVARV is the variant table and used to store the variants of a report.You do not need to create a new variant or keep changing an existing variant each time a value changes. Instead, you can change the relevant values in table TVARV.
Its an obsolette table in ECC 5.0 and the correct one will be TVARVC table.
We used to store the fiscal period variants in this table.
Thanks,
Vinay

Variable on TVARV table

Hello,
we have just upgraded to BI 7.0 and we have the following issue:
when I launch a query and I try to select a variable from TVARV value I don't find this option !
Is it deleted this option in the new Bi 7?
Thanks!

Thanks for your answer,
but when I run the query, I don't find the option for the Variable to select the TVARV value, is it normal?
Regards,
Laura

TVARVC table not getting updated properly

Hi,
We are facing a strange problem...
First job runs to update TVARVC variable to a new value...let say 6 to 7....
Second job which runs immediatly after first job uses this variable in TVARVC to read the value picks up old value instead of new value....i.e. its using 6 instead of 7.
Also TVARVC variable is Fully Buffered table...Can anyone tell me eventhough this variable is updated with new value, why second job is picking old value..??? also i dint see any COMMIT WORK after updating TVARVC in program...i doubt if buffered and no commit work causing the issue...any thoughts???
Expecting your help.
Thanks
Hari

Hi Hari,
Is your update and the program that uses the update in the same LUW? You can create a function module, and run it "in update task". Then update your TVARV table, and run the other program from the function module.
This will put all the programs in the same LUW.
If for some reason your update to TVARV doesn't happen, and it abends, your other program will not be executed.
Just a thought,
Michelle

Change TVARV variable...

Hi,
I have a variable maintained in TVARV whose value needs to be changed every month. In production, I cannot give access to SM30/SM31 to a user as he might then have access to change values in all other tables too.
What can I do ?
Should I write an ABAP program to get the new value as input and update the TVARV table for this variable and provide access to this program to an user ? Is this the only way ?
Pl suggest.
thnks

Hi,
Use transaction STVARV OR STVARVC for maintaining values in TVARVC table This should solve your purpose.
This is the standard way of doing it.
Hope this helps.
Thanks
Edited by: Sumit Naik on Feb 24, 2011 7:01 PM

Update TVARV variables...

Hello all,
I would greatly appreciate it if someone could send me a sample program to update table TVARV with a variable for 'From' and 'To' date and time. I have already declared 4 parameters in TVARV.
i.e. User will enter 'From' and 'To' dates and time in parameters and TVARV table will be updated, and when report is run next time, the 'To' date/time will become 'From' date/time. In other words, it will take the latest value of the variables.
Regards,
Eddie.

We actually use a BDC do update the table using SM31. I have it encapsulated in a subroutine(form) .
Send the variable name, the variable type(P or S) and the low and high. The BDC code will take care of the rest. It will handle Parameters and Select-options.
*      Form REUSE_BDC_SESSION
form reuse_bdc_session using var_name
                             var_type
                             variable
                             variable_low
                             variable_high.
perform bdc_dynpro      using 'SAPMSVMA' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                                'VIEWNAME'.
perform bdc_field       using 'BDC_OKCODE'
                                '=UPD'.
perform bdc_field       using 'VIEWNAME'
                            'TVARV'.
perform bdc_field       using 'VIMDYNFLDS-LTD_DTA_NO'
                                'X'.
perform bdc_dynpro      using 'SAPMS38V' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                                '%#AUTOTEXT001'.
perform bdc_field       using 'BDC_OKCODE'
                                '=TOGGLE'.
perform bdc_dynpro      using 'SAPMS38V' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                                '%#AUTOTEXT001'.
perform bdc_field       using 'BDC_OKCODE'
                                '=SINGLE'.
perform bdc_dynpro      using 'SAPMS38V' '1001'.
perform bdc_field       using 'BDC_CURSOR'
                                'TVARV-NAME'.
perform bdc_field       using 'BDC_OKCODE'
                                '=CHNG'.
perform bdc_field       using 'TVARV-NAME'
                            var_name.
if var_type = 'P'.
    perform bdc_field       using 'RB_TYPE_P'
                                  'X '.
    perform bdc_field       using 'RB_TYPE_S'
    perform bdc_dynpro      using 'SAPMS38V' '0600'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'PAR_VAL'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=USAV'.
    perform bdc_field       using 'PAR_VAL'
                                variable.
endif.
if var_type = 'S'.
    perform bdc_field       using 'RB_TYPE_P'
    perform bdc_field       using 'RB_TYPE_S'
                                  'X'.
    perform bdc_dynpro      using 'SAPMS38V' '0600'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'SEL_VAL-LOW'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=%015'.
    perform bdc_dynpro      using 'SAPLALDB' '3000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=INTL'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSCSEL-SLOW_I(01)'.
    perform bdc_dynpro      using 'SAPLALDB' '3000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ACPT'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSCSEL-IHIGH_I(01)'.
    perform bdc_field       using 'RSCSEL-ILOW_I(01)'
                              variable_low.
    perform bdc_field       using 'RSCSEL-IHIGH_I(01)'
                             variable_high.
    perform bdc_dynpro      using 'SAPMS38V' '0600'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'SEL_VAL-LOW'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=USAV'.
endif.
perform bdc_dynpro      using 'SAPMS38V' '1001'.
perform bdc_field       using 'BDC_CURSOR'
                                'TVARV-NAME'.
perform bdc_field       using 'BDC_OKCODE'
                                '=RETN'.
perform bdc_dynpro      using 'SAPMS38V' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                                '%#AUTOTEXT001'.
perform bdc_field       using 'BDC_OKCODE'
                                '=SAVE'.
perform bdc_dynpro      using 'SAPMS38V' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                                '%#AUTOTEXT001'.
perform bdc_field       using 'BDC_OKCODE'
                                '=RETN'.
perform bdc_dynpro      using 'SAPMSVMA' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                                '/EBACK'.
perform bdc_field       using 'BDC_CURSOR'
                                'VIEWNAME'.
call transaction 'SM31' using bdcdata
                          mode   mode
                          update 'S'.
if sy-subrc = 0.
    write:/ i_tvarv-name, at 40 'Variable updated successfully'.
    case var_type.
      when 'P'.
        write:80 variable.
      when 'S'.
        write:80 variable_low, at 100 variable_high.
    endcase.
else.
    write:/ i_tvarv-name, at 40 'Error occured during update process'.
endif.
commit work and wait.
clear bdcdata. refresh bdcdata.
endform.
Regards,
Rich Heilman
Message was edited by: Rich Heilman

TVARV table

Similar Messages

Maybe you are looking for