Two collect statement from internal table

Dear Experts,
I want populate values to two internal tables from a internal table.
can i use two collect statement for different internal table from a single internal table.
advise please.
Thanks in advance.
R.Rajendran

hi there....
well u can very well use this thing.....
use the two colect statements inside the loop which u will use to read the records of the input table.
hope it helps.
do reward if it does.

Similar Messages

Issue with WRITE statement from Internal Table

Hi All,
I have written the below code in a infoset query, the syntax check is ok & when i run the query in debugging mode, i find the internal table being filled with the values & the write statement outputing the values as well.
But the problem is when i execute the query the output does not show all the lines, instead just displays the last record . What could be the mistake?
Is it because i have defined Y_EBELN, Y_EBELP & Y_OPENQTY as nodes in the Extras Tab of the infoset & have chosen this for display in my query? How to display the output from my internal table in my query output?
Hope my problem is clear, await clarification.
Vivek
Code
types:
    Begin of itab,
      wl_ebeln   type eket-ebeln,
      wl_ebelp   type eket-ebelp,
      wl_openqty type eket-menge,
    End of itab.
Data: il_po type table of itab with header line.
*Display open PO for materials
SELECT EKETEBELN EKETEBELP EKETMENGE EKETWEMNG EKET~EINDT
     INTO (Y_EBELN, Y_EBELP, WL_MENGE, WL_WEMNG, Y_EINDT)
    FROM EKET
      INNER JOIN EKPO
         ON EKETEBELN     = EKPOEBELN
          AND EKETEBELP = EKPOEBELP
      INNER JOIN MARD
         ON EKPOMATNR     = MARDMATNR
          AND EKPOWERKS = MARDWERKS
          AND EKPOLGORT = MARDLGORT
    WHERE EKPO~MATNR = MARD-MATNR
      AND EKPO~WERKS = MARD-WERKS
      AND EKPO~LGORT = MARD-LGORT
      AND EKPO~LOEKZ = SPACE
      AND EKPO~ELIKZ = SPACE.
*Display only still open qty per schedule line
Y_OPENQTY = WL_MENGE - WL_WEMNG.
il_po-wl_ebeln = Y_EBELN.
il_po-wl_ebelp = Y_EBELP.
il_po-wl_openqty = Y_OPENQTY.
    append il_po.
ENDSELECT.
ENDIF.
Loop at il_po.
write:/ il_po-wl_ebeln, il_po-wl_ebelp, il_po-wl_openqty.
endloop.

Hi Vivek,
Try it like this.
Data: Begin of itab,
       lifnr type lfa1-lifnr,
       name1 type lfa1-name1,
       land1 type lfa1-land1,
      End of itab,
      it_lfa1 like table of itab with header line,
      lifnr like lfa1-lifnr,
      name1 like lfa1-name1,
      land1 like lfa1-land1.
select lifnr name1 land1 into (lifnr, name1, land1)
       from lfa1.
it_lfa1-lifnr = lifnr.
it_lfa1-name1 = name1.
it_lfa1-land1 = land1.
append it_lfa1.
endselect.
loop at it_lfa1.
write:/ it_lfa1-lifnr, it_lfa1-name1, it_lfa1-land1.
endloop.
Note:
In place of the above select you insert your join select statement. It is working for me.
You have declared your internal table wrongly. In the internal table instead of TYPE use LIKE, it will work.
Hope this will work for you.
Thanks & Regards
Haritha.

Reg: Collect statement in internal table

Hi,
   Can any one tell me wether we can use the collect statement in an internal table which has no header line
if it can be used can anyone please send me a sample snippet
Thanks In ADVANCE
Guhapriyan Subrahmanyam

Hi Guhapriyan,
I have used the collect statement in the way as shown..
DATA : BEGIN of I_ALLOCATIONS OCCURS 0,
        PSPNR LIKE PRPS-PSPNR,
        PSPID LIKE PROJ-PSPID,
        PSPHI LIKE PRPS-PSPHI,
        POST1 LIKE PROJ-POST1,
        ZZLOB LIKE PROJ-ZZLOB,
        WERKS LIKE PROJ-WERKS,
        SOBID LIKE HRP1001-SOBID,
        OBJID LIKE HRP1001-OBJID,
        BEGDA LIKE HRP1001-BEGDA,
        ENDDA LIKE HRP1001-ENDDA,
        PROZT LIKE HRP1001-PROZT,
        LOB   LIKE HRP1000-STEXT,
        TEMP TYPE P decimals 2,
        TYPE(3),
        ZROLE LIKE PA0001-ZROLE,
        HOLID TYPE P decimals 2,
        LEAVE TYPE P decimals 2,
        DAYS TYPE P decimals 2,
       END of I_ALLOCATIONS.
DATA: I_ALLOCATION LIKE I_ALLOCATIONS OCCURS 0 WITH HEADER LINE.
************Populate I_ALLOCATIONS **************
LOOP AT I_ALLOCATIONS.
    COLLECT I_ALLOCATIONS INTO I_ALLOCATION.
ENDLOOP.
Actually i had requirement like u, but this one is rather simple...
Get the required data in an I_Table which dont require Header line..
Later on collect this particular I_Table in other I_Table1 with the Header Line...
Regards,
Abhishek

Insert or Modify statement from internal table to database table

Hi All,
I have three tables wakh, wrf and wakp. I have an internal table with 5 columns col1, col2, col3, col4 and col5.
The value in Col1 is my article no and the articleno. is in the table wakh. The value in col2 is my ccode and it is in the table wrf. The rest three columns col3, col4 and col5 are unit, qty and price and they are in the wakp table. Now when my articleno is equal to ccode I need to update the col3, col4 and col5 values in the wakp. wakp has around 20 columns.
Can anyone of you guys please give me the code for this issue. Your help is highly appreciated and thanks for all for your time.
Cheers,
Cheng

Hi Rob,
let me explain you the whole process what i am trying to do. I have a screen where there are 3 fields. In my first field I have a promoiton no. As soon as the user enters the promotion no. its description will be populated in my second field. If the promotion is not maintained then it will throw an error. In my third field User will upload an excel sheet which has 5 columns articleno, colorcode, salesunit, qty, mdprice. Here articleno is coming from wakh and colorcode is in wrf_charval table and the rest three fields are coming from wakp table. So for the article no. which is in col1. and for its corresponding colorcode which is in col3 i need to update col3, col4, col5 values.
With my below code I am able to upload the excel into internal table and display it. So instead of displaying I need to update in the database. Can you please let me know how I need to attach the function module within my code and update accordingly.
REPORT ZTest.
tables : wakh, wakt.
Parameter: PromoID type wakh-aktnr, PromoDec type wakt-aktkt, p_file LIKE rlgrap-filename
               DEFAULT 'c:\test.xls' OBLIGATORY.   " File Name
*FileName type string.
*file_nm type localfile.
TYPES:   BEGIN OF t_datatab,
         col1(25) TYPE c,
         col2(30) TYPE c,
         col3(30) TYPE c,
         col4(30) TYPE c,
         col5(30) TYPE c,
         END OF t_datatab.
DATA: it_datatab TYPE STANDARD TABLE OF t_datatab INITIAL SIZE 0,
      wa_datatab TYPE t_datatab.
Data : p_table type t_datatab occurs 0 with header line.
DATA : gd_scol   TYPE i VALUE '1',
       gd_srow   TYPE i VALUE '2',
       gd_ecol   TYPE i VALUE '5',
       gd_erow   TYPE i VALUE '65536'.
DATA: it_tab TYPE filetable,
      gd_subrc TYPE i.
field-symbols : <fs>.
AT selection-screen on PromoID.
select single * from wakh where aktnr = PromoID.
if sy-subrc EQ 0.
select aktkt from wakt into PromoDec where aktnr eq PromoID.
endselect.
else.
message A000(ZI) with 'Promotion ID is not Maintained.'.
endif.
*Title : Excel Uploading
*Selection screen definition
*SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
*PARAMETERS: p_file LIKE rlgrap-filename
              DEFAULT 'c:\test.xls' OBLIGATORY.   " File Name
*SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
REFRESH: it_tab.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title     = 'Select File'
      default_filename = '*.xls'
      multiselection   = ' '
    CHANGING
      file_table       = it_tab
      rc               = gd_subrc.
LOOP AT it_tab INTO p_file.
   so_fpath-sign = 'I'.
   so_fpath-option = 'EQ'.
   append so_fpath.
ENDLOOP.
START-OF-SELECTION.
PERFORM upload_excel_file TABLES   it_datatab
                             USING   p_file
                                     gd_scol
                                     gd_srow
                                     gd_ecol
                                     gd_erow.
END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT it_datatab INTO wa_datatab.
    WRITE:/ wa_datatab-col1,
            wa_datatab-col2,
            wa_datatab-col3,
            wa_datatab-col4,
            wa_datatab-col5.
ENDLOOP.
*&      Form UPLOAD_EXCEL_FILE
      upload excel spreadsheet into internal table
     -->P_TABLE    Table to return excel data into
     -->P_FILE     file name and path
     -->P_SCOL     start column
     -->P_SROW     start row
     -->P_ECOL     end column
     -->P_EROW     end row
FORM upload_excel_file TABLES   p_table
                       USING    p_file
                                p_scol
                                p_srow
                                p_ecol
                                p_erow.
DATA : lt_intern TYPE kcde_cells OCCURS 0 WITH HEADER LINE.
Has the following format:
            Row number   | Colum Number   |   Value
     i.e.     1                 1             Name1
              2                 1             Joe
DATA : ld_index TYPE i.
Note: Alternative function module - 'ALSM_EXCEL_TO_INTERNAL_TABLE'
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
    EXPORTING
      filename                = p_file
      i_begin_col             = p_scol
      i_begin_row             = p_srow
      i_end_col               = p_ecol
      i_end_row               = p_erow
    TABLES
      intern                  = LT_INTERN
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      OTHERS                  = 3.
IF sy-subrc <> 0.
    FORMAT COLOR COL_BACKGROUND INTENSIFIED.
    WRITE:/ 'Error Uploading file'.
    EXIT.
ENDIF.
IF lt_intern[] IS INITIAL.
    FORMAT COLOR COL_BACKGROUND INTENSIFIED.
    WRITE:/ 'No Data Uploaded'.
    EXIT.
ELSE.
    SORT lt_intern BY row col.
    LOOP AT lt_intern.
     MOVE lt_intern-col TO ld_index.
     assign component ld_index of structure
     p_table to <fs>.
move : lt_intern-value to <fs>.
    MOVE lt_intern-value TO p_table.
      AT END OF row.
        APPEND p_table.
        CLEAR p_table.
      ENDAT.
    ENDLOOP.
ENDIF.
ENDFORM.
Thanks for your valuable time.
Cheng

Update databse from internal table statement not using index

Hi Guys,
We are updating a databse table from a file. The file has a couple of fields which have data different from what the database has (non-primary fields :). We upload the file data into an internal table and then update the database table from internal table. At a time, internal table is supposed to have 10,000 records. I did SQL trace and found that the update statement is not making use of the databse index.
Should not the update statement here be using the table index (for primary key)?
Regards,
Munish

... as often there are recommendations in this forum which makes me wonder, how people overestimate their knowledge!!!
Updates and Deletes do of course use indexes, as can be seen in the SQL Trace (use explain).
Inserts don't use indexes, because in many databases inserts are just done somewhere, But also with the INSERT, the primary key is the constraint for the uniqueness condition, duplicate keys are not allowed.
Coming to the original question, what is you actually coding for the update?
What is the table, which fields are in the internal table and what are the indexes?
Siegfried

Import from internal table

Dear Experts,
I need a solution for importing from an internal table.
Two variables I_EXP01 and I_EXP02 containing an xml stream have been exported to the database using the following syntax
and depending on the size of I_EXP01 and I_EXP02 two or more entries are created in table LTEX.
EXPORT
         L_SAPRL
         I_EXP01
         I_EXP02
TO    DATABASE LTEX(LT)
                       ID LS_LTEXKEY.
But now i have a few entries of table LTEX in an internal table and they need to be imported from the internal table.
What would be the syntax to import from internal table so that after importing I can de-serialise the data from XML to ABAP.
Thanks & Regards,
Ashwini

Try this and let me know if it works:
IMPORT
L_SAPRL
I_EXP01
I_EXP02
To
L_SAPRL1 (same type as above)
I_EXP011 (same type as above)
I_EXP021 (same type as above)
FROM DATABASE LTEX(LT)
ID LS_LTEXKEY.
if it is not working. try using seperate statements for each internal table and see.
Thanks,
Venkatesh.
Edited by: venkatesh333 on Jul 27, 2011 6:23 AM

Using COLLECT on a internal table

Hello,
I have fetched records from a table into my internal table through, " SELECT * FROM .... INTO TABLE FOR ALL ENTRIES IN ...... "
There are two columns in my internal table against which i need a total of the column. COLLECT sums the amounts . But how can i use COLLECT in this scenario ?
Can anyone kindly guide me ...Thanks
Shehryar Dahar

Hi,
COLLECT add the numeric entries for the corresponding table keys..
Example.
DATA: BEGIN OF ITAB OCCURS 0,
MATNR TYPE MATNR,
COUNT TYPE I,
END OF ITAB.
ITAB-MATNR = 'ABC'.
ITAB-COUNT = 2.
COLLECT ITAB.
ITAB-MATNR = 'ABC'.
ITAB-COUNT = 1.
COLLECT ITAB.
ITAB-MATNR = 'ABCD'.
ITAB-COUNT = 2.
COLLECT ITAB.
ITAB-MATNR = 'ABCD'.
ITAB-COUNT = 3.
COLLECT ITAB.
LOOP AT ITAB.
WRITE: / ITAB-MATNR, ITAB-COUNT.
ENDLOOP.
For more information on Collect, check this site:
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/collect.htm
Hope this would help you out.
Regards,
Varun.

IMPORT Statement Issue (Internal Table)

Hi All,
I am using an IMPORT statement to get all the data from other report's internal table. Now whenever this (the other report's internal table) is changed (for field addition, etc), my report throws a dump. Hence, everytime I have to add these fields in my program as well.
Is there any way by which I can include the whole internal table of that report in my program just like
'INCLUDE STRUCTURE VBRK'.
Thanks in advance

Hi, CHeck this code related to your problem..This will helpful to you...
I have done this program earlier..I hope it will helpful to u..
This programa calling the other program to import the data..
Check it out...
*" Tables declarations.................................................
TABLES:
spfli.
*" Type declarations...................................................
Type declaration of the structure to hold data from table SPFLI     *
TYPES:
BEGIN OF type_s_spfli,
    carrid LIKE spfli-carrid,          " Carrier Id
    connid LIKE spfli-connid,          " Connection Number
    cityfrom LIKE spfli-cityfrom,      " City from
    cityto LIKE spfli-cityto,          " City to
    airpfrom LIKE spfli-airpfrom,      " Airport from
    airpto LIKE spfli-airpto,          " Airport to
    countryfr LIKE spfli-countryfr,    " Country from
    countryto LIKE spfli-countryto,    " Country to
END OF type_s_spfli.
Data Declaration...................................................*
     Field String To Hold Flight Details Record from SPFLI          *
DATA
fs_spfli TYPE type_s_spfli.
Data Declaration...................................................*
     Internal Table To Hold Flight Details Records from SPFLI       *
DATA
t_spfli LIKE STANDARD TABLE OF fs_spfli.
TYPES:
BEGIN OF types_s_itab,
    carrid LIKE sflight-carrid,        " Carrier id
    connid LIKE sflight-connid,        " Connection number
    fldate LIKE sflight-fldate,        " Flight date
END OF types_s_itab.
Data Declaration...................................................*
     Field String To Hold Flight Details Record from SFLIGHT        *
DATA
fs_itab TYPE types_s_itab.
Data Declaration...................................................*
     Internal Table To Hold Flight Details Records from SFLIGHT     *
DATA
t_itab LIKE STANDARD TABLE OF fs_itab.
*" Type declarations...................................................
Type declaration of the structure to hold data from table SBOOK     *
TYPES:
BEGIN OF type_s_sbook,
   carrid LIKE sbook-carrid,           " Carrier Id
   connid LIKE sbook-connid,           " Connection Number
   fldate LIKE sbook-fldate,           " Flight date
   bookid LIKE sbook-bookid,           " Booking number
   loccuram LIKE sbook-loccuram,       " Local currency
   loccurkey LIKE sbook-loccurkey,
   order_date LIKE sbook-order_date,   " Booking date
END OF type_s_sbook.
Data Declaration...................................................*
     Field String To Hold Flight Details Record from BOOK           *
DATA
fs_sbook TYPE type_s_sbook.
Data Declaration...................................................*
     Internal Table To Hold Flight Details Records from SBOOK       *
DATA
t_sbook LIKE STANDARD TABLE OF fs_sbook.
DATA
w_checkbox.                          " Checkbox
SELECT-OPTIONS:
s_carr FOR spfli-carrid.             " Carrier id range
                      START-OF-SELECTION EVENT                      *
START-OF-SELECTION.
PERFORM selectq.
                      END-OF-SELECTION EVENT                        *
END-OF-SELECTION.
SET PF-STATUS 'YH1314_030502'.
PERFORM display_basic.
AT USER-COMMAND.
PERFORM ucomm.
*&    Form selectq
    This subroutine retreive data from SPFLI table
There are no interface parameters to be passed to this subroutine.
FORM selectq .
SELECT carrid                        " Carrier id
         connid                        " Connection number
         cityfrom                      " City from
         cityto                        " City to
         airpfrom                      " Airport from
         airpto                        " Airport to
         countryfr                     " Country from
         countryto                     " Country to
         INTO CORRESPONDING FIELDS OF TABLE t_spfli
         FROM spfli
         WHERE carrid IN s_carr.
ENDFORM.                               " Selectq
*&      Form display_basic
    This subroutine displays data from internal table
There are no interface parameters to be passed to this subroutine.
FORM display_basic .
LOOP AT t_spfli INTO fs_spfli.
    WRITE:
      / w_checkbox AS CHECKBOX,
        fs_spfli-carrid,
        fs_spfli-connid,
        fs_spfli-cityfrom,
        fs_spfli-cityto,
        fs_spfli-airpfrom,
        fs_spfli-airpto,
        fs_spfli-countryfr,
        fs_spfli-countryto.
ENDLOOP.                             " LOOP AT T-SPFLI INTO...
ENDFORM.                               " Display_basic
*&      Form UCOMM
This subroutine for at user-command event
There are no interface parameters to be passed to this subroutine.
FORM ucomm .
RANGES :
    r_carr FOR spfli-carrid,
    r_conn FOR spfli-connid,
    r_carrid FOR sflight-carrid,
    r_connid FOR sflight-connid,
    r_fldate FOR sflight-fldate.
CASE sy-ucomm.
    WHEN 'DISPLAY'.
      DATA:
        lw_lines TYPE i,
        lw_lineno TYPE i VALUE 3.
      DESCRIBE TABLE t_spfli LINES lw_lines.
      DO lw_lines TIMES.
        READ LINE lw_lineno FIELD
             VALUE w_checkbox   INTO w_checkbox
                   fs_spfli-carrid INTO fs_spfli-carrid
                   fs_spfli-connid INTO fs_spfli-connid.
        IF sy-subrc = 0.
          IF w_checkbox = 'X'.
            r_carr-sign = 'I'.
            r_carr-option = 'EQ'.
            r_carr-low = fs_spfli-carrid.
            APPEND r_carr.
            r_conn-sign = 'I'.
            r_conn-option = 'EQ'.
            r_conn-low = fs_spfli-connid.
            APPEND r_conn.
          ENDIF.                       " IF W_CHECKBOX = 'X'
        ENDIF.                         " IF SY-SUBRC = 0
        ADD 1 TO lw_lineno.
      ENDDO.                           " DO LW_LINES TIMES
      SUBMIT yh1314_030502_call
        WITH s_carr IN r_carr
        WITH s_conn IN r_conn
         AND RETURN.
      IMPORT t_itab FROM MEMORY ID 'YH1314'.
      LOOP AT t_itab INTO fs_itab.
        r_carrid-sign = 'I'.
        r_carrid-option = 'EQ'.
        r_carrid-low = fs_itab-carrid.
        APPEND r_carrid.
        r_connid-sign = 'I'.
        r_connid-option = 'EQ'.
        r_connid-low = fs_itab-connid.
        APPEND r_connid.
        r_fldate-sign = 'I'.
        r_fldate-option = 'EQ'.
        r_fldate-low = fs_itab-fldate.
        APPEND r_fldate.
      ENDLOOP.                         " LOOP AT T_ITAB INTO.....
      SELECT carrid                    " Carriee Id
             connid                    " Connection number
             fldate                    " Flight date
             bookid                    " Booking number
             loccuram                  " Local Currency
             order_date                " Booking date
         INTO CORRESPONDING FIELDS OF TABLE t_sbook
         FROM sbook
         WHERE carrid IN r_carrid AND
               connid IN r_connid AND
               fldate IN r_fldate.
      IF SY-SUBRC NE 0.
        MESSAGE 'NO RECORDS FOUND'(006) TYPE 'S'.
      ENDIF.                           " IF SY-SUBRC NE 0
      LOOP AT t_sbook INTO fs_sbook.
        AT FIRST.
          WRITE: /5 'Carrier Id'(001),
                 20 'Conn Id'(002),
                 35 'Flight date'(003),
                 50 'Book Id'(004),
                 65 'Local Currency'(005).
        ENDAT.                         " AT FIRST
        WRITE: /5 fs_sbook-carrid,
               20 fs_sbook-connid,
               35 fs_sbook-fldate,
               50 fs_sbook-bookid,
               65 fs_sbook-loccuram CURRENCY fs_sbook-loccurkey.
      ENDLOOP.                         " LOOP AT T_SBOOK INTO.....
ENDCASE.                             " CASE SY-UCOMM
ENDFORM.                               " UCOMM
Regards
Kiran

Create XML file from internal table and vise a versa

Hi Friends,
I have requirement to create an XML string from internal table data and also read XML string data to internal table.
Can anybody tell are there any Function Modules or methods existing for this?
Thanks.
Krishna Yerram.

1. Write XSLT program. T.code XSLT . e.g. XSLT name "ZTRANS".
2. Write ABAP program
Which includes declaration of internal tables
that you need "IT_DATA".
Upload XML data to an internal table "IT_XML "
use below statement to convert XML to internal table.
Call transformation ZTRANS
source XML IT_XML
result IT_DATA.

Can we apply select statement on internal table.

can we apply select statement on internal table.if yes thrn let me know how to do.

Dear Sachin,
You cannot use SELECT statement on internal table.
If you want to select some rows from internal table you can LOOP the table or you can READ the table.
<u>Please check the following links for your kind reference:</u>
<b>http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb35de358411d1829f0000e829fbfe/content.htm
http://www.sap-img.com/ab009.htm
http://www.itsmarc.com/crs/Clas0302.htm
http://www.sapdevelopment.co.uk/tips/tips_itab.htm
http://searchsap.techtarget.com/search/1,293876,sid21,00.html?query=whatisinternaltable&bucket=ALL</b>
Cheers !
Moqeeth.

Query statement for internal table

is it possible to use a select statement to select data from an internal table? if yes, can anyone show me the codes to it? thx

Hi Daphne,
You use SELECT statement to read data from database table but not from Internal table.
For reading data from Internal table, you have to use READ statement.
Syntax:
READ TABLE itab { table_key
| free_key
| index } result.
Effect of using read statement:
This statement reads a row from internal table itab. You have to specify the row by either naming values table_key for the table key, a free condition free_key or an index index. The latter choice is possible only for index tables. The output result result determines when and where the row contents are read.
If the row to be read is not uniquely specified, the first suitable row is read. In the case of index tables, this row has the lowest table index of all matching rows.
Reward if usefull
thanks
swaroop

Update statement in Internal Table

Plz tell me the syntax and e.g. of update statement in Internal Table program
Moderator message: Welcome to SCN, please research yourself before asking basic questions.
Edited by: Thomas Zloch on Feb 25, 2010 12:47 PM

Hi,
Use UPDATE statement , check below description from SAP help.
UPDATE dbtab FROM TABLE itab. or UPDATE (dbtabname) FROM TABLE itab.
Effect
Mass update of several lines in a database table.Here, the primary key for identifying the lines tobe updated and the values to be changed are taken from the lines of theinternal table itab.
The system field SY-DBCNT contains the number of updated lines,i.e. the number of lines in the internal table itab which havekey values corresponding to lines in the database table.
Regards
L Appana

Collect message into internal table

Hi,
does any one knows how BAPIs or CALL TRANSACTIONs collect messages into internal table.
My problem is that some BI with CALL TRANSACTION doesn't collect right message into return table and I would like to collect this last message after CALL TRANSACTION and therefore be sure that everything went OK.....
thx
mario

hi
good
check this
Call Transaction p_trans using ZBDC_Table
                               Mode p_mode
                             Update p_update
                      Messages into p_messages.
     Move sy-subrc to w__subrc.
   Scan the messages in YDCRAISES to see if we need to
   change the message class.
     Loop at p_messages.
          Select single msgtyp
            into w__msgtp
            from zdcraise
           where tcode = p_messages-tcode and
                 msgid = p_messages-msgid and
                 msgnr = p_messages-msgnr.
          If sy-subrc = 0.
             Move w__msgtp to p_messages-msgtyp.
             Modify p_messages.
          EndIf.
     EndLoop.
   Dump the message table ?
     If w__ydcset-dumpmsg = True.
thanks
mrutyun^

How to transfer from internal table to table control ?

How to transfer data from internal table to table control wihtout using select statement?

HI
GOOD
The commands in the flow logic are:
LOOP AT itab [INTO wa] WITH CONTROL ctrl.
ENDLOOP.
This statement assigns an internal table itab of the ABAP program to the table control and triggers a parallel loop run over the table control rows displayed on the screen and over the internal table itab. The additions INTO and WITH CONTROL are possible at the time of PBO, but not at PAI. The assignment of the loop to the table control takes place at PAI through the internal table.
Using the INTO addition, the fields of the internal table itab are written to the work area wa at the time of PBO and the content of wa is transported, line by line, to the identically-named fields of the table control on the screen. Without the INTO addition, you must use an internal table with a header line. Then the content of the header line is transported line by line to the identically-named fields of the table control on the screen at the time of PBO. No module is required for filling the table control rows.
Conversely, at the time of PAI, the internal table rows are not automatically filled with the contents of the table control rows. Instead, you must call a dialog module within the loop that modifies the table.
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/fa/0970a4543b11d1898e0000e8322d00/content.htm
THANKS
MRUTYUN^

Reading Data from Internal Table

Hi,
Can anyone please tell me how to read data from Internal Tables in the Event Handler without using the Select statement OnInitialization?
Thanks,
Gaurav

Hi Siddhartha,
Can you tell me the problem in my code. I tried to work on the way you suggested. Though I have not finished with the coding, I just wanted to know whether I am going in the direction or not.
I have declared the the structure in Type Defination as
TYPES: BEGIN OF TEST_STRUC,
         BEGDA TYPE BEGDA,
         ENDDA TYPE ENDDA,
       END OF TEST_STRUC.
TYPES: TEST_TAB_TYPE TYPE TABLE OF TEST_STRUC.
In the Event Handler, I have added the following code on OnInputProcessing:
event handler for checking and processing user input and
for defining navigation
DATA TEST_INFO LIKE LINE OF TEST_TAB.
DATA: MYTAB6 TYPE TABLE OF PA0006,
      MYTAB6_WA LIKE LINE OF MYTAB6.
REFRESH TEST_TAB.
CLEAR TEST_INFO.
MYTAB6_WA-BEGDA = REQUEST->GET_FORM_FIELD( STARTDATE ).
MYTAB6_WA-ENDDA = REQUEST->GET_FORM_FIELD( ENDDATE ).
IF EVENT->NAME EQ 'button'
   AND EVENT->SERVER_EVENT EQ 'click'.
LOOP AT MYTAB6 INTO MYTAB6_WA.
    TEST_INFO-BEGDA = MYTAB6_WA-BEGDA.
    TEST_INFO-ENDDA = MYTAB6_WA-ENDDA.
ENDLOOP.
APPEND TEST_INFO TO TEST_TAB.
CLEAR TEST_INFO.
NAVIGATION->SET_PARAMETER( NAME = 'test_tab'
VALUE = 'begda' ).
NAVIGATION->SET_PARAMETER( NAME = 'test_tab'
VALUE = 'endda' ).
NAVIGATION->GOTO_PAGE( 'MyBSP2.htm').
ENDIF.
P.S. MyBSP2.htm is my next page.
Thanks,
Gaurav

Two collect statement from internal table

Similar Messages

Maybe you are looking for