Two different configurations.

Hi! At home my airport express connects directly to the DSL modem via PPPoE. All three computers on the Airport wireless network have good connections and can sign into banking sites, my credit cards-- any password protected places. No problem.
At my OFFICE. I have the DSL modem plugged directly into my iMac. I turn airport ON and in the preferences pane, I opt to share the ethernet connection with my ibook. iMac can access password protected sites. iBook cannot. Any ideas? The OFFICE network is set up on a 128-WEP encryption. Can my old G-3 iBook not handle that? It seems to work just fine on the HOME network.
Any responses would be most appreciated. Dan

I am guessing that you have the firewall enabled on the iMac at work. If so, you need to do one of the following:
disable the firewall
open the appropriate ports in the firewall
use Flying Buttress to open the appropriate ports on the firewall

Similar Messages

  • How to split one monitor into two, differently configured desktops

    Hello,
    I have a 27" iMac. I would like to split the screen into two differently configured desktops or monitors. Apps like TwoUp or Divy don't exactly do this. I'll explain it with an example:
    Suppose I'm working on a document and I need to open many folders to retrieve files. One common problem is that opened folders overlap each other and sometimes they overlap with the document I'm working on, or they go underneath the document. I would like to split the screen vertically in, say, two virtual, independent desktops/monitors, like this:
    - one window/space on one side (say, on the left) of the screen would contain the document  from top to bottom, with no dock bar on the bottom
    - the other window/space (right) would behave as a regular, full desktop, with the entire dock on the bottom
    In this way, if I need to navigate to find a file to use in the document, I would move the cursor to the right. The Finder would work only in this window/space, thus windows or other applications would never overlap or clutter the left side of the screen. Drag-and-drop from right to left should be possible.
    One way to imagine it is as if the 16x9 monitor were comprised by two vertical, 8x9 independent monitors side by side, each with its own configuration.
    Is this possible? Can anyone recommend an application or type of setup?
    Thank you,
    -celso

    Looking for something like this?
    You can tell Display Maid to save the positions of your open windows across many apps and later restore those positions when things become a mess. With Display Maid you don’t have to restore windows one at a time, or even one app at a time. Display Maid restores all saved window positions across all apps with one command. It will also restore window positions automatically when it detects a workspace change.
    http://www.funk-isoft.com/index.php/display-maid

  • Oracle RAC on two different configuration systems

    Can we install Oracle RAC (Standard Edition) on severs having different configuration -
    1. Server 1 - IBM x3850 - 2 processors occupied, 128 GB RAM, windows server 2008 R2 64 bit
    2. Server 2 - IBM 3650 - 2 processors, 64 GB RAM, windows server 2008 R2 64 bit
    Thanks & Regards

    931577 wrote:
    Dear Billy
    The storage will be on IBM SAN with fibre channel connectivity for both the servers.
    The node A will be only for production and Node B for non production. Pl suggest your recommendations.So, you will configure node1 for database1(instance1) and node2 for database2(instance1)? So much for fail-over... For your proposed configuration, why waste the extra RAC license if you are only going to have the prod db running on a single node? Also Windows???? And you are paying for Windows SERVER licenses as well??? Why? Linux (even Oracle Enterprise Linux) is free and the support cost are far less than for Windows. It is slow and is a nightmare to manage. Learn Linux or AIX or something. I don't do Windows and I certainly would never deploy RAC on Windows. (My deployment of RAC clusters now stands > 75 clusters with the largest at 250TB and NONE of them on Windows).
    This is more like RAC-One than RAC. I have a problem using a single RAC cluster to support both my production and non-production work. It also negates the primary reason to use RAC - high availability. In your proposed solution, if your production db goes down on node1(instance1) your application is dead. In RAC, when the middle-tier attempts to reconnect, it would simple connect to a surviving node. You will not have that feature in your proposed configuration.
    I also would object to the notion of having production database in the same set of DiskGroups (ASM) or file systems as my non-production data. There are too many times where I have seen a someone execute a process that brought the entire system down due to high I/O - now, if you have this configuration, it is conceivable that your non-prod I/O could affect your production (SAN switch overload, Storage array overload etc...). And all of this does not include the "oops-factor". That's what happens when you thought you were deleting data files for your non-prod database that you want to restore and "accidently" delete production data files.
    You asked for suggestions --
    1) buy more hardware
    2) have 1 standalone for non-prod
    3) have 2 nodes for RAC - deploy production only here.
    >
    We are on windows as all our other servers are on Windows.<rude remark removed>
    >
    >
    ThanksEdited by: onedbguru on May 4, 2012 3:26 PM

  • How to use Stock Category Group for two different configuration.

    Hi all,
    I want to use the stock category group to do this scenario:
    I have two process using the same location, the process A wants to consider Stock cat. Grp. 'ZSW' (SAPAPO/LOC3) so it will consider Stock using CC, CF and CE. The process B wants to consider Stock Cat. Grp. 'ZST' to consider only CC.
    My doubt:
    How can I do that setup to make different things according the process? I tried to do something in Planning Area (SAPAPO/MSDP_ADMIN) but doesnu2019t work.
    Can anyone help me?
    Thanks,
    -Ralph Veiga

    Hi Ralph Veiga,
    Indeed the stock category group is define at location level...
    I think your answer involves macros more than PA settings.
    First I will suggest to split the stock key figure into 2: one for CC, one for the other.
    For the CC, use the standard (cetegory group with CC only on the location master)
    Now you need to populate the second key figure with CF and CE.
    You should be able to built a macro using function PHYSICAL_STOCK() to get what you want.
    For sure yuo first need a way to check if you want or not the CF and CE. Here implement your own logic for exemple base on your product characteristics with either MAT(), MAT_C(), MAT_EXTRA(), MATLOC_C()...
    Else you can use a Z function in the macro to collect this data, but it involves ABAP coding.
    PS: you don't actually need to split the key figure into to, but I think it helps with visibility...
    Regards
    Julien

  • Can UWL are simontanously configure for two different sap systems ? How ?

    Hi,
    I am new in portal. Can any one tell me how to configure UWL . We have r/3 system as well as crm system. i want to show both UWL for both the system on one page.
    Please give ans in steps by steps.
    Please suggest me steps for that.
    Regards,
    Gurprit Bhatia
    Edited by: GURPRIT BHATIA on Dec 26, 2007 1:34 PM

    Hi GURPRIT,
    It is possible to display item from two different systems.
    All you need to do is create separate webflow connectors for the systems for which you required to configure the UWL and the systems must be available in the SLD.
    after creating the connectors register both of them and you can start receiving workitems from both the systems.
    reward if useful.
    Rgds,
    Vijay

  • ASA 5510 context base configuration in HA Mode with two different subnet

    Hi
    Please someone help me to configure the Firewall ASA 5510 in context based configuration in HA Mode with two different subnet....
    IP Details are below.....:
    interface Ethernet0/0
    nameif outside
    security-level 0
    ip address 10.10.10.2 255.255.255.0 standby 10.10.10.3
    interface Ethernet0/1
    no nameif
    security-level 0
    no ip address
    interface Ethernet0/1.101
    description INSIDE1
    vlan 101
    nameif INSIDE1
    security-level 90
    ip address 172.22.0.2 255.255.255.0 standby 172.22.0.3
    interface Ethernet0/1.102
    description INSIDE2
    vlan 102
    nameif INSIDE2
    security-level 80
    ip address 172.22.1.2 255.255.255.0 standby 172.22.1.3
    interface Ethernet0/3
    description LAN Failover Interface
    failover
    failover lan unit primary
    failover lan interface FAILOVER Ethernet0/3
    failover replication http
    failover interface ip FAILOVER 192.168.3.1 255.255.255.0 standby 192.168.3.2
    route outside 0.0.0.0 0.0.0.0 10.10.10.1 1

    Hi Sanjeev,
    If it is a context based configuration  that you are doing then, you would need to configure context on the ASA first, you can refer to this document for it:
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808d2b63.shtml
    Thanks,
    Varun Rao
    Security Team,
    Cisco TAC

  • How do I configure my email page for two different email addresses?

    I would like to have mail sent to two different email addresses, on my email page using Thunderbird.
    How do I do that?

    There is no "New-existing Mail Account"

  • Can I configure my network settings to use two different proxy configurations?

    At work, I have a proxy server, but away I do not.  I would like the correct proxy settings to load in each case.  Currently, I use two different locations.  This works acceptably, but I have to open my network settings and manually switch locations when my location changes.  I have experimented with creating multiple ethernet ports.  I can create a location with two ethernet ports, but I can't find a way to cause the correct one to activate.  The first port in the search order is loaded even if the proxy is not found.
    Please let me know if you can help with this.  Thank you.

    I'm not sure of another way to do what you want, but there should be a Location menu in the Apple menu. You don't need to open the network prefs to change locations.

  • Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

    Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
    However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
    What we found from out testing:
    - The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
    - The file can be closed and  Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
    - Also, until the  Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file. 
    Example Scenario:
    - User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
    - Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
    - User 1 saves his file and closes it - but  Dreamweaver is still open.
    - User 2 also saves his file and leaves  Dreamweaver  open.
    - The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
    - If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
    - Same for User 2, he will open 'his' version with 2300 lines in.
    Other information:
    - Files are opened directly from the server
    - Sometimes the users will save incrementally and re-open
    - Most of the time users will save incrementally and keep the files open
    - The users will never not save incrementally and just save when closing the file once finished
    - The users are usually working on the files all day
    - It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
    It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
    Anyone know if this is a known issue?
    Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
    Thanks

    Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
    Mylenium

  • APEX Application accessing data from two different databases

    Hi All,
    Currently as we all know that APEX Application resides in database and is connected to the schema of that database.
    I want APEX Application to be running and accessing data from two different databases. Elaborating my question,
    Currently, my APEX Production Application is connected with XXXX Schema of DB1 Database(Where APEX Resides). Now I want to add some pages into this APEX Application for REPORT Purpose, But I want to connect this REPORT APEX Pages to get data from Different Schema YYYY for Database DB2.
    Is it possible to configure this scenario?
    The reason for doing this is to avoid the REPORT related (adhoc queries) resource utilization effect on Production DB1 Database.
    Thanks
    Nil

    1. If you do the joining of two or more tables in DB1 then all data is pulled over to DB1 and then the join is executed: so more data over the databaselink and more work for DB1. Better keep the joining stuff where the data resides and just pull exactly that data over that you need.
    2. Don't know about your different block sizes. Seems a nice question for one of the other forums (DBA or SQL).
    3. I mean create synonyms on DB1 for reports VIEWS in DB2.
    Hope all is clear!

  • SSO logon tickets not working in two different OS

    HI All,
    We have sucessfully implemented SSO logon tickets concept to access a j2ee application through portal on windows OS.
    We could able to do the samething on two j2ee instances installed on two different machines on same domain. I mean, deploying our application in one j2ee instance and accessing the application thru portal of another j2ee instance thru SSO logon ticket by adding some configuration steps in Visual administrator given in help.sap.com. This also we did in same OS windows.
    But now the problem is, when we try to implement the above scenario in two different OS, say application is deployed on HPUX machine, and accessing that application through Portal from Solaris machine, SSO logontickets is failing. Means we couldnt able to access the application. Both the OS are in same domain only.
    What extra configuration steps need to be done in VA, to get work with two different OS?
    Please share ur ideas.
    Regards,
    Satish.

    Hi..
    I guess probabaly the internet explorer doesnot accept the sso ticket.
    What you can probably check is that the compatability of explorer for the solaris and HP UX os with Windows OS.
    Also,please check whether the SSO ticket is getting populated and What error are you getting exactly when the SSO fails and that will give some idea to proceed further
    <u>deploying our application in one j2ee instance and accessing the application thru portal of another j2ee instance[/u
    What the above mean...how are you deploying ?? what tool ?? which J2EE instance out of the two ??
    Thanks
    Gopal

  • How can I Generate two different reports from single execution of Test cases in NI teststand

    Hi,
    My requirement is to generate two different reports from NI teststand. One for the Logging of error descriptions and the other report is by default generated by the Teststand. How can i generate a txt file that contains error descriptions other than that mentioned in the default report?
    Solved!
    Go to Solution.

    Do you need to do that just for these two sequences but not for other sequences? I don't see a problem to use SequenceFilePostStepRuntimeError. Create this callback in both sequence files and configure them to log into the same file. SequenceFilePostStepRuntimeError callback is called after each step of the sequence file if it has runtime error. You can access the calling step error information via RunState.Caller.Step.Result.Error property. Take a look to attached example.
    The "other way" is useful if you need to log errors not for every step of the sequence file, but for some of them. This is more complex, because you need to create a custom step types for these steps. For the custom step you can create substeps (post-step in your case) which will be executed every time after step of this type executed. Then, this is you job to determine if error happened in the step, acces to step's error information is via Step.Result.Error property. 
    Also, be aware that step's post-expression is not executed in case of error in the step.
    Sergey Kolbunov
    CLA, CTD
    Attachments:
    SequenceFilePostStepRuntimeError_Demo.seq ‏7 KB

  • How to use two different network cards on RT?

    Hi everyone... I'm currently working on a project where I have to deal with the issue mentioned in the thread's topic: I have a PC with RT LabVIEW that has to be able to establish network connections using two different network cards. One will be used to connect via TCP/IP with a host computer that will show the data transmitted through shared variables; the other will communicate with another PC through Modbus protocol. The key is that each communication is done through a separate network card.
    So far I haven't been able to figure out how to configure both things to happen. Does anyone know how to do this? Any tips will help.
    For the RT communication I'm using a standard RT project, with the RT PC being given one of the IPs, and for the Modbus part, I created an I/O server with a master and a slave. Separately everything works fine, but when I get them together it simply won't work.
    Thanks for your help!
    Solved!
    Go to Solution.

    Sorry it took me so long to answer, I've been busy lately....I've found a solution to the problem I mentioned, and just in case anyone has similar problems in the future, I'll shortly describe what happened.
    As Caseyw suggested, it was necessary to enable both network cards through the Measurement and Automation Explorer. The cause of the connections malfunction was actually that I wasn't using the "right" protocol for the Modbus communication, which ran on the secondary adapter. The solution was to use the URL protocol with the correct path on the field, addressing the right IP address. To avoid making this post a mixture of topics, I won't elaborate futher, but I got the gist of it, so if anyone is having similar problems whether it is working with several network cards or with Modbus communication protocols, feel free to contact me, I'll be glad to help.
    Thanks

  • How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

    How To Using Two Different Public IP Address on My DMZ with ASA 5520
    Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
    Hi everyone out there.
    can any one please help me regarding this situation that im looking for a solution
    My old range of public ip address are finished, i mean (the 41.x.x.0 range)
    So now i still need to have in my DMZ another two servers that will bring some new services.
    Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
    So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
    ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
    So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
    on Cisco ASA 5520 v8??
    How my configuration should look like?
    I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
    Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
    attached is my network diagram for a better understanding
    I thank every body in advance
    Jorge

    Hi,
    So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
    Now you have gotten a new public IP address range from the ISP and want to get it into use.
    How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
    To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
    So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
    Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
    Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
    Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
    Of the above ways
    The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
    The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
    Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
    I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
    - Jouni

  • HT201250 Can I use Time Machine on two different Macs to back up to one external drive?

    Can I use Time Machine on two different Macs to back up to one external drive?
    I have one 1T Western Digital backup drive that works well with Time Machine and my MacBook Pro.  I now want to back up my wife's MacBook Air using Time Machine on her Mac and want to know if I can use the same WD external drive or if I need to get a 2nd back up drive?  If I can use one external drive for the two Macs do I need to do something special on the drive or will Time Machine do it automatically?

    Yes. You will need to configure Time Machine preferences on each computer to backup to the same drive. Note that you cannot connect the backup drive to both machines at the same time.

Maybe you are looking for