Two different invoices created for  one order for two different lines

Hi All,
I have an order with four line items that was shipped on the same day, invoiced on the same day and all lines have the same delivery number yet two inovices were created for this order..one for the first three lines and one for the last line.
Can anyone please explain what can cause this to happen?
Thanks
A/A

Hi Asgar,
If a single order has been split into two invoices, you should check the values of the mandatory columns. During Autoinvoice, the grouping is based on the madatory columns and also your grouping rules. If any of the mandatory column has a different value, it will split into different invoice.
Please refer the following metalink note for further details
Subject: How Autoinvoice Grouping Works
Doc ID: 98772.1
Hope that helps.
Thanks,
Anil

Similar Messages

  • Swap between two different item categories in sales orders for sub-contracting

    Dear gurus,
    my requirement is to have the ability to swap between two different item categories for sales orders for sub-contracting.
    This should be controlled by a combination of the material and a value maintained the Usage field in the Customer Material Info Record (for example by entering a ‘V’).  A combination of Sales Doc Type, Item Cat Group and Usage should result in the creation of a purchase requisition.
    In the event that a process order is required instead of a purchase requisition (i.e. the product is to be manufactured in-house instead of sub-contracted) the user must have the ability to change the Item Category within the sales order to produce a process order.
    The user would just change the item category within the sales order, and the system would automatically remove the purchase requisition assigned to the SO, and create a process order and assign it to the SO.
    Can you suggest any possible solution?
    Thank you in advance.

    Hi Majlo,
    In my system, I checked.  First created sales order with third party line item and then changed item category to normal item category.
    Till Purchase order not created, I can change Item category of my sales order line item.
    In this case SAP inform by log and once save delete purchase requisition of that line item .
    For this you need to assign another item category as an manual item category in SPRO Item category assignment.
    After this user can manually change item category to other one manually, if PO do not exist.
    Please let me know if your query is different.
    Regards

  • Created sales order for one division, for which the material belongs to ano

    Dear All,
    A sales order has been created for a division 10, for which the material belongs to some other division 20 in material master.
    When we are  create a sales order for 10 division ( the one which we give at organzational data) at the item level the material which we select should also belong to the same division, if  the material division  is different as 20 the system will throw an error at sales order  saying "ship-to-party so and so is not created for the sales area so and so.."
    But here it's allowing me to create a sales order for division 10 with 20 Division material without any error. But this should not happen.
    Checked in the document type VOV8 where at the Check division field 2 has been there.
    Please suggest

    Hello,
    Let me explain the concept of Header division and item division...the header division is the one which gets copied from the sales area division that gets determined in the sales doc creation from SP.
    The item division is the division that gets copied from the material master in the line item material.
    In the Sales document type , there is a check box "Item Division". If this is marked, then system takes the division from the Mat master. if this is not marked system the system doesnt find from MMR instead it picks up from header division.
    The check division controls, how the system should behave in case the header and item division differ..
    Rgds,
    Rags.

  • Customization for create 2 Work orders for different vendors against 1 PR

    Hi,
    What are the customization settings  to create 2 work orders for 2 different vendors against 1 PR with half-half quantity?

    thank you Mario.
    Actuly its infrastructure cmpany & user wants create Purchase order(service work order) for two different vendors with reference to single PR with alocating 60% quantity to 1st vendor & remaining 40% to another vendor.
    user allready created Po for 1st vendor (60% Quantity).
    Now system showing error " Quantity is allready full for reference PR"
    I want to know what is the procedue to solve this issue & customization.

  • System should create only one delivery for 100 different PO's in STO

    Hi All
    i need help
    Plant B raising 100 different po's daily for different materials to Plant A.(STO)
    Now Plant A will do Dilivery via VL10B.
    Here my requirement is system should create only one delivery for 100 different PO's and delivery should contain all the
    materials as line items bcause system should not create 100 deliveries( time consuming process).
    Here there is no manual transaction for VL10B.
    That is system is goining to excecute the VL10B automatically, there is no manual transation for VL10B
    How can we do this?
    Thanks
    MSK

    Hi
    We can able to do your requirement
    1. All the STO materials should have same sales view in materials for the *Unique)following field: Loading group, shipping Point, so on..
    2. In the config, hope we have do the combine delivery setting for VL10B
    Regards
    Prasanna
    Edited by: Prasanna Raju on Feb 17, 2010 1:52 PM

  • Create Delveries(Partial) for one order using BAPI_OUTB_DELIVERY_CREATE_SLS

    Hi All,
    In ECC Transaction VL10A, for example for one order having 5 QTY, user can process 2 QTY and create delivery, remaining
    with 3 QTY another delivery is possible.
    Same way i am trying to create deliverys using BAPI_OUTB_DELIVERY_CREATE_SLS.
    For Processing delivery ( giving Partial QTY ) i am using another application and that is working. But when i am trying to create
    delivery for same order (which is Parial delivered), it is not allowing to create delivery. giving error.
    No Instance of object type Outbound delivery has been created external reference.
    No Schedule lines due for delivery upto the selected date.
    Is there any other BAPI is there for like this scenario or how can i process this using this BAPI??
    Please give me any help?
    This is code i am using to process BAPI...
    if sy-subrc is INITIAL.
        LOOP AT IT_VBAP INTO WA_VBAP.
          WA_TAB-REF_DOC    = WA_VBAP-VBELN.
          WA_TAB-REF_ITEM   = WA_VBAP-POSNR.
          WA_TAB-DLV_QTY    = WA_VBAP-KWMENG.
          WA_TAB-SALES_UNIT = WA_VBAP-VRKME.
          append WA_TAB to DEL_TAB.
        ENDLOOP.
      ENDIF.
    * Calling BAPI_OUTB_DELIVERY_CREATE_SLS
      CALL FUNCTION 'BAPI_OUTB_DELIVERY_CREATE_SLS'
        EXPORTING
          SHIP_POINT        = lv_ship_point
          DUE_DATE          = lv_ledat
        IMPORTING
          DELIVERY          = del
        TABLES
          SALES_ORDER_ITEMS = del_tab
          RETURN            = bapi_return.
    Thanks,
    Venkat.

    Hi Venkat,
    If you check the Function Module Documentation, there is a note which mentions:
    Order (SALES_ORDER_ITEMS-REF_DOC)
    Unless specified otherwise, the entire order is delivered. This means that it is not necessary to list all the order items. It is sufficient to specify the order number.
    Please try this.
    Regards,
    Pranav.

  • TWO INVOICE CREATED AGAINST ONE DELIVERY T-CODE VF01

    Hi,
    I got strange scenario that against one delivery containing multiple line items two different  invoice created during normal sales process , First  invoice with some line item and another invoice contains rest of the item.
    Both the invoices is of same billing type.
    We want one invoice against the delivery.
    Help to resolve the problem
    Thanks in advance for your valuable time and effort
    Regards
    Praveen

    Hello,
    please run  VF03 to display one billing document, then by menu Environment > Split analysis it is possible to see the cause of the split.
    Best regards,
    Ivano.

  • Multiple Labels for One Order

    Can anybody tell me if it is possible to produce multiple labels for one order. For example a customer orders 4 units. A standard package holds 3 units so an additional package is required for the fourth unit. As a result two packing labels are required. Does OM 11i support this?

    Hi Aj
    Thanks for your quick response. I was think on the same lines and you have confirmed that we will have to split the line into several lines on sales order.
    I am trying to do that now in our ECC box i.e item 10 with payer 1 and item 2 with payer 2. But as soon as I try to change the payer on item 2, i get the following error message which relates to credit management being active.
    I am assuming once we decativate CM, we should be good to go. PLease confirm. Also once its time for billing, will SAP automatically split the billing into different invoices per sales order line item based upon number of payers on the line items?
    PLease confirm your thoughts.
    Regards
    Jai

  • How to create a sales order for Onetime customer with Tax code?

    Hi everyone,
    Can I use sd_salesdocument_create for a one-time customer? From the standard bapi, which field can I use for the Tax Code ?
    pOints will be given.

    I have the same problem... should I use a different function module on this? if yes, what is it?
    I need to create a sales order for one onetime customer with tax code... help me pls....

  • Can I create 1 repair order for many equipments / functional locations?

    Dear Experts,
    I'm trying to create 1 single order for many equipments in different functional locations but it seems like the fields for "equipment" and "functional location" in Operation tab are not allowed to enter.
    What is the Tcode to open up those fields?
    Or is there any other ways of doing?
    regards,
    Abraham

    1. Object list Activate
    IMG => PM & CS => Maintenance & Service Processing => Maintenance & Service Orders => Functions & Settings => Define notification & Order Integration
    Select Assignment of operations to Object List entries active in Enh. Object list column for your order type.
    2. Then create the order in IW31. Assign all the equipments in object list tab. Define the operations in operation tab. Go to object list & select equipment one by one & click Assignments button in the bottom. In pop-up window, select the operations for that particular equipment. One operation can be assigned to only one operation. If same operation requires for more than one equipment, then different operation rows should be defined.
    3. Click Settlement rule button in the top (If you want to create settlement rule manually). Based on your equipment entry in object list, enter the cost center & % of cost to be settled.
    4. If you want to automate settlement rule creation, as mentioned in previous posts, use the user exits. Transaction code for user exit is SMOD. ABAP people will write the code based on your input for settlement rule creation.

  • Conversion for One Orders

    Hi,
        I am doing a Mass Conversion Program for One Orders in CRM. I am creating Service Orders based on incoming .CSV File. Which Function Module is better for Upload of Mass data Performance wise. 'CRMXIF_ORDER_SAVE'  Function Module or 'BAPI_BUSPROCESSND_CREATEMULTI' Function Module  for Creation of One Orders in CRM.

    Get in touch with support (by web chat on weekends). Maybe there is an issue with processing your payment.
    Mylenium

  • Create auotmatic purchase order for non stock materials

    Hi,
    Please provide me information on how to create automtaic purchase order for non stock materials in MM system.
    Regards

    Hi,
    For automatic PO creation follow the steps.
    1) Material Master purchasing view tick automatic PO check box  (Material type NLAG)
    2) Vendor Master purchasing view tick automatic PO check box.
    3) Maintain Source list for Vendor & Material.
    4) Maintain Purchase Info Record.
    5) Create a Purchase Requisition.
    6) Use T.Code: ME59N & execute for PR for vendor, you will be able to create automatic PO.
    Note
    Ensure that Purchase Info Record should be there.
    If you have more than one vendor then fixes only one vendor in source list.
    During PR creation select source determination check box.
    SAM

  • Can't create a delivery order for stock transfer #

    Hi All
    I stuck with one ticket ...
    Can't create a delivery order for stock transfer #
    Kindly provide input to resolve this.
    Thanks

    Hi,
    Can you tell us as to what is the issue here? What transaction are you using?
    Anyways, check below things:
    1. Check for the inputs which must be relevant for the delivery creation
    2. Check if table VETVG is updated with the STO number.
    Please revert back with more inputs if problem still persists?
    Regards
    SD

  • Creating a production order for a semi finished product

    Hi
    I am having a multi level bom scenario over here.
    one of the bom components of the header material is a semi finished product.
    I am using the planing stratagy 40 for that material.
    in standard sap when i create a production order for  header material. the requirement gets transerd to all the components. if the components are not available then only  a requirement is placed. when i run MRP that requirement gets converted in to a planned order. which converts in to a purchase req or a production order,
    well for my semi finished product. its a Work in process item. there wont be any stock for that item in the storage location any time.
    what my requirement is. when i create a production order for my finished product it should automatically create a production order for the semi finished product.
    is this possible with some configuration settings.

    Dear Deepu,
    for ur requirement u need to maintain MRP type PD for FERT material and also for ur HALB.
    If u run  MRP  only, it will create planned order for FERT and for all its dependent requirement(for PD).
    If u create order manually for FERT material then it will not create order for HALB material, u need to create manualy for this also.
    sree

  • Is it possible to create a Production order for consignment fill-up?

    Dear all,
    As you know, the consignment  fill-up is  for delivery the own stock to customer special stock.
    But our customer request, they want to create a Prodcuction order for the consignment fill-up.
    The design flow is like below:
    Consignment fill-up -> MRP -> Production order -> GR the FG to local storage location -> Outbound Delivery to customer special stock
    So could any one tell me is it possible?
    Because I have tried to change the configuration for it, but always failed.
    Tks
    David

    Hello,
    Kindly go through following links:
    To consider customer consignment stock while MRp with help of user exit/bad
    Re: Excluding Kanban storage location from MRP
    To consider customer consignment stock while MRp with help of user exit/bad
    Can MRP consider customer consignment quantity ?
    PP-MRP Exclude Consignment stock in MRP
    customer consignment in MRP?
    Consignment Fill Up Error
    Thanks & Regards
    JP

Maybe you are looking for