Two different table to be printed in smartform

Hi Abapers,
I am having a requirement of printing the data from two internal table in the smarform. Since there is only one main window in the smartform. The data present in the first table is taken in to the main window. The data of the other table should be printed at the specifed place in the smartform . If the data is more in which cannot be printed in single page It should automatically get extended into the next page in the specified place. Since I can able to use only one main window I am using the other table entry in the secondary window. but if there is more data, the data is getting truncated and not displaying in the next page.Can you please give me the solution to this problem.
Points will be rewarded for the fruitful answers.
Thanks & Regards
Nagaraj S.

Hi
In the general attributes of the page,check if it is given adjactent to "Next",the name of the next page.
If it is given then in the conditions tab of the second table,just select the additional event you require there.
Hope this resolves the issue. Reward points if helpful.
Thanks and Regards,
Vishwa.

Similar Messages

Regarding Passing two internal Tables from Driver Program to Smartform

hi all,
I am Passing Two Internal Tables from Driver Program to Smartform it is going to dump and message is showing like this " one of the parameters eded according to the interface description was not specified ".
When i am passing one Internal Table Output is coming Perfectly. Is there any restriction for passing of internal tables.
Regards
Rami

HI,
Check the names specified in the smartfrom and FM whcih you are calling in the driver program. Both might be different....

How to create a foreign key for the table from two different tables?

Hi All,
I have a three table like below. In the below table SAMPLE_CONS_CHECK and SAMPLE_CONS2_CHECK will be having the primary key for NAME column. The same SAMPLE_CONS3_CHECK table also having the primary key for NAME column and forieign key for SAMPLE_CONS_CHECK and SAMPLE_CONS2_CHECK tables. See the below code 2
code 1:
CREATE TABLE SAMPLE_CONS_CHECK
        (NAME VARCHAR2(10),
        SERIES VARCHAR2(5)
CREATE TABLE SAMPLE_CONS2_CHECK
        (NAME VARCHAR2(5),
         MODEL NUMBER
CREATE TABLE SAMPLE_CONS3_CHECK
        (NAME VARCHAR2(5),
         MODEL_NO NUMBER
        )code 2
alter table SAMPLE_CONS_CHECK
add constraint SAMPLE_CONS_CHECK_pk primary key (NAME)
alter table SAMPLE_CONS2_CHECK
add constraint SAMPLE_CONS2_CHECK_pk primary key (NAME)
alter table SAMPLE_CONS3_CHECK
add constraint SAMPLE_CONS3_CHECK_pk primary key (NAME)
ALTER TABLE SAMPLE_CONS3_CHECK ADD
CONSTRAINT SAMPLE_CONS3_CHECK_FK1 FOREIGN KEY
     NAME
) REFERENCES SAMPLE_CONS_CHECK
    NAME
) ON DELETE CASCADE;
ALTER TABLE SAMPLE_CONS3_CHECK ADD
CONSTRAINT SAMPLE_CONS3_CHECK_FK2 FOREIGN KEY
     NAME
) REFERENCES SAMPLE_CONS2_CHECK
    NAME
) ON DELETE CASCADE;From the above schenario i am able to insert the data to SAMPLE_CONS3_CHECK table. But the parent data is already available in the parent table. The problem is here two different constarints from two different tables. While inserting, it is checking from both the tables whether the parent is exist or not.
How can i solve this problem? Can anyone halp me about this?
Thanks
Edited by: orasuriya on Aug 8, 2009 2:02 AM

Actually the design is completely incorrect.
What you say is
I have
'foo', 'foo series'
'foo','foo model'
'foo',666
By virtue of table3 referring to both table1 and table2.
This means you actually need to have 1 (one) table:
'foo','foo series','foo model', 666
And the 'problem' disappears.
Sybrand Bakker
Senior Oracle DBA

How to load data from a flat file to two different tables at a time.

I am not aware of Sql Loader so Please any body suggest me that is there any way to load data from excel sheet to two different tables at a time its very urgent.
with regards,
Srinivas.R

Read Utilities Guide from the Oracle Documentation Library. See
<br>
Oracle Database FAQs
</br>

How can I combine post to two different tables with one form?

I am trying to create a "phantom" record in a table to be used later in a report. How can I create a form and properly $_POST to two different tables? Thanks for any suggestions!

In POST processing, just do the insert to one table, followed by the insert to the second table. I don't understand where you are getting stuck.
Sometimes when we do an insert, we need the auto-generated ID from the newly created record as a "foreign key" for the record created in the second insert. MySQL has a nifty solution for that. The specific code depends on whether you are using the mysql, mysqli or PDO database connection.

Selecting data from two different tables.

Do we need to use join two tables with primary/foreign key while trying to use select statement for getting data from those to table.? If no who can i go about do it.

872959 wrote:
If i am using From clause to get data from two different tables, is it necessary that both tables have column of identical data in them.In general, they ought to (or you need to join in a third table that tells you how to map rows from one table to rows of the other table).
It is not strictly necessary that there be any join condition between tables. If you don't provide a join condition, Oracle has to do a Cartesian product. That means that if there are n rows in one table and m rows in the other, the result set will have n * m rows. It is very rarely a good idea to write queries that do Cartesian products but it does occasionally happen.
Justin

To find Common data in 2 columns in two different tables.

Hi,
Could someone help me out with a querry to find out common data from 2 columns in two different tables??
Thanks
Rajesh

966915 wrote:
suppose i hav 2 tables
Table A
s.No name EID
1 aaa 123
2 bbb 234 ... etc..
and Table B
S.no salary eid location
1 mmm$ 123 india
2 ddd$ 556 Uk
3 fff$ 236 US
How do i select the common entry in both the tables??why do you post in forum for SQL & PL/SQL; yet never post anything in either language?
what do you mean by "common enrty"?
does every column value must match exactly across 2 rows in different table?

How to compare the contents of two different tables

hello. can somebody give me an idean on how to compare the contents of two different tables in mysql?
example, i have a table named Main List and a table named New List.
The contents of the New List should be compared to the contents of the
Main List, to check if they are equal. I don't have any idea how to manipulate
this data. Hoping for your help. Thanks.

it is better to comapre it using java.. try get the resultset first and store that in collections then comapre the two collections

Comparing row values in two different tables

Hello,
Does anyone know if it is possible to compare (and possibly highlight - which I know can be done) row values in two different tables?
I have a ZIP Code column in table A that I want to compare to a ZIP Code column in table B and highlight those ZIP Codes that are present in table B but not in table A etc. Is this possible?
Thanks,
Kenneth

To be able to apply conditional formatting, I must edit the formulas this way.
=IF(ISBLANK(B)," ",IF(ISERROR(VLOOKUP(B,Tableau 2 :: B,1,0))," ",VLOOKUP(B,Tableau 2 :: B,1,0)))
=IF(ISBLANK(B)," ",IF(ISERROR(VLOOKUP(B,Tableau 1 :: B,1,0))," ",VLOOKUP(B,Tableau 1 :: B,1,0)))
I replaces the four empty strings by strings containing one space character.
In the field supposed to contain the text which is not contained I just entered a single space character.
Yvan KOENIG (from FRANCE vendredi 12 septembre 2008 20:52:11)

Extracting unique records from two different tables record

Hello,
In the following code of two different tables www.testing.com exists in both tables. I want to compare two different columns of the two different tables to get unique records.
SQL> select unique(videoLinks) from saVideos where sa_id=21;
VIDEOLINKS
www.testing.com
SQL> ed
Wrote file afiedt.buf
1* select unique(picLinks) from saImages where sa_id=21
SQL> /
PICLINKS
test
test14
www.hello.com
www.testing.comThanks & best regards

Unfortunatly you didn't mention the expected output. I guess it would be the one line
"www.testing.com"
in that case simply join the two tables.
select *
from saVideos v
join saImages i on i.sa_id = v.sa_id and i.picLinks = v.videoLinks
where v.sa_id=21;If needed then you could change the select list to retrieve only distinct values.
select unique v.sa_id, v.videolinks
from saVideos v
join saImages i on i.sa_id = v.sa_id and i.picLinks = v.videoLinks
where v.sa_id=21;I usually avoid distinct/unique whereever possible. This requires the database to do a sort and makes the query slow.
Edited by: Sven W. on Feb 10, 2011 1:55 PM

Update two different tables by a single sql query:

Hi All,
i need to update two different talbes in a single sql query..
i m using the following query
UPDATE FT_User_Alert SET Subscription = 'W' where product_key=1 and measure_key = 12
AND
UPDATE LU_Monthly_Alert_Budget_Sheet SET Min_Red_Range ='16.0' AND Max_Green_Range ='24.0'AND Max_Red_Range ='27.0'AND Min_Green_Range ='16.0' where product_key='1' and measure_key = 12
i m getting the following error:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43093] An error occurred while processing the EXECUTE PHYSICAL statement. [nQSError: 17001] Oracle Error code: 936, message: ORA-00936: missing expression at OCI call OCIStmtExecute: UPDATE FT_User_Alert SET Subscription = 'W' where product_key=1 and measure_key = 12 AND UPDATE LU_Monthly_Alert_Budget_Sheet SET Min_Red_Range ='16.0' AND Max_Green_Range ='24.0'AND Max_Red_Range ='27.0'AND Min_Green_Range ='16.0' where product_key='1' and measure_key = 12 . [nQSError: 17011] SQL statement execution failed. (HY000)
SQL Issued: EXECUTE PHYSICAL CONNECTION POOL writeback UPDATE FT_User_Alert SET Subscription = 'W' where product_key=1 and measure_key = 12 AND UPDATE LU_Monthly_Alert_Budget_Sheet SET Min_Red_Range ='16.0' AND Max_Green_Range ='24.0'AND Max_Red_Range ='27.0'AND Min_Green_Range ='16.0' where product_key='1' and measure_key = 12
but when i m ushin the same query in Microsoft SQL Server it executes properly:
please help me out...

Duplicate thread. I've already answered on your other thread...
update two different tables by a single sql query:

Insert same record on two different tables (no master detail)

Hi all,
I'd like to know how to insert 1 record into two different
tables.
the first table is corni_dati the second is cornidati_prev
anytime someone inserts a new record both tables should be
filled.
if ((isset($HTTP_POST_VARS["MM_insert"])) &&
($HTTP_POST_VARS["MM_insert"] == "form1")) {
$insertSQL = sprintf("INSERT INTO corni_dati (corni_id,
disciplina,
codice_modulo, insegnanti, classi, obiettivi, prerequisiti,
ud1, ud2,
ud3, ud4, ud5, ud6, metodologia, collegamenti, verifiche,
verifiche_note, durata, periodo_inizio, periodo_fine, note,
indirizzo,
modnum, modulo_titolo, `data`, compilato, descrizione) VALUES
(%s, %s,
%s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s,
%s, %s, %s,
%s, %s, %s, %s, %s, %s, %s)",
GetSQLValueString($HTTP_POST_VARS['corni_id'],
"int"),
GetSQLValueString($HTTP_POST_VARS['disciplina'],
"text"),
GetSQLValueString($HTTP_POST_VARS['codice_modulo'], "text"),
GetSQLValueString($HTTP_POST_VARS['insegnanti'],
"text"),
GetSQLValueString($HTTP_POST_VARS['classi'],
"text"),
GetSQLValueString($HTTP_POST_VARS['obiettivi'],
"text"),
GetSQLValueString($HTTP_POST_VARS['prerequisiti'], "text"),
GetSQLValueString($HTTP_POST_VARS['ud1'],
"text"),
GetSQLValueString($HTTP_POST_VARS['ud2'],
"text"),
GetSQLValueString($HTTP_POST_VARS['ud3'],
"text"),
GetSQLValueString($HTTP_POST_VARS['ud4'],
"text"),
GetSQLValueString($HTTP_POST_VARS['ud5'],
"text"),
GetSQLValueString($HTTP_POST_VARS['ud6'],
"text"),
GetSQLValueString($HTTP_POST_VARS['metodologia'], "text"),
GetSQLValueString($HTTP_POST_VARS['collegamenti'], "text"),
GetSQLValueString($HTTP_POST_VARS['verifiche'],
"text"),
GetSQLValueString($HTTP_POST_VARS['verifiche_note'], "text"),
GetSQLValueString($HTTP_POST_VARS['durata'],
"int"),
GetSQLValueString($HTTP_POST_VARS['periodo_inizio'], "text"),
GetSQLValueString($HTTP_POST_VARS['periodo_fine'], "text"),
GetSQLValueString($HTTP_POST_VARS['note'],
"text"),
GetSQLValueString($HTTP_POST_VARS['indirizzo'],
"text"),
GetSQLValueString($HTTP_POST_VARS['modnum'],
"text"),
GetSQLValueString($HTTP_POST_VARS['modulo_titolo'], "text"),
GetSQLValueString($HTTP_POST_VARS['data'],
"date"),
GetSQLValueString($HTTP_POST_VARS['compilato'],
"text"),
GetSQLValueString($HTTP_POST_VARS['descrizione'], "text"));
mysql_select_db($database_itiscorni, $itiscorni);
$Result1 = mysql_query($insertSQL, $itiscorni) or
die(mysql_error());
$insertGoTo = "creacodice_doc.php";
if (isset($HTTP_SERVER_VARS['QUERY_STRING'])) {
$insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
$insertGoTo .= $HTTP_SERVER_VARS['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));

If you are doing this then you really should have a look at
your database
design. Read up on the first 3 normal forms.
Pat.
"darrel" <[email protected]> wrote in message
news:ee77jg$302$[email protected]..
>
>
> --
>> Hi all,
>> I'd like to know how to insert 1 record into two
different tables.
>
> In your SQL query, just use two inserts:
>
> INSERT into TABLE1...; INSERT into TABLE2...
>
> Darrel
>

Sum two different columns from two different tables

Can you select and sum two different columns, from two different tables in the same sql statement?
i.e.
table1
Item----OnHand_Qty
A--------10
A--------15
B--------10
B--------10
C--------20
table2
Item----Trx_Qty
A--------2
A--------4
A--------6
B--------1
B--------1
C--------4
I'm looking for the following results from a query
Item----Sum(Onhand_Qty)---Sum(Trx_Qty)
A--------25

Like this?
SQL> create table table1 (item,onhand_qty)
2 as
3 select 'A', 10 from dual union all
4 select 'A', 15 from dual union all
5 select 'B', 10 from dual union all
6 select 'B', 10 from dual union all
7 select 'C', 20 from dual union all
8 select 'D', 30 from dual
9 /
Tabel is aangemaakt.
SQL> create table table2 (item, trx_qty)
2 as
3 select 'A', 2 from dual union all
4 select 'A', 4 from dual union all
5 select 'A', 6 from dual union all
6 select 'B', 1 from dual union all
7 select 'B', 1 from dual union all
8 select 'C', 4 from dual union all
9 select 'E', 3 from dual
10 /
Tabel is aangemaakt.
SQL> select nvl(t1.item,t2.item) item
2       , t1.sum_onhand_qty
3       , t2.sum_trx_qty
4    from ( select item, sum(onhand_qty) sum_onhand_qty
5             from table1
6            group by item
7         ) t1
8         full outer join
9         ( select item, sum(trx_qty) sum_trx_qty
10             from table2
11            group by item
12         ) t2
13         on (t1.item = t2.item)
14 /
I SUM_ONHAND_QTY SUM_TRX_QTY
A             25          12
B             20           2
C             20           4
E                          3
D             30
5 rijen zijn geselecteerd.Regards,
Rob.

Query from two different tables

Hi All
I am having two different tables A and B. I want to select all rows containing the names like the rows in B.
I have tried the below and it does not work:
select * from A where name like (select '%'||name||'%' from B).
Can anyone help please.
Thanks
Amit

Hi Jeneesh
Thanks for the quick reply.
What i want is query to bring back all the name containing the string which is to be found in the table B.
Table A's content
Amit
Amita
Anjoo
Table B's Content
Ami
Query should return
Amit
Amita

How to update two different tables by ony one sql query???

Hi All,
i need to update two different talbes in a single sql query..
i m using the following query
UPDATE FT_User_Alert SET Subscription = 'W' where product_key=1 and measure_key = 12
AND
UPDATE LU_Monthly_Alert_Budget_Sheet SET Min_Red_Range ='16.0' AND Max_Green_Range ='24.0'AND Max_Red_Range ='27.0'AND Min_Green_Range ='16.0' where product_key='1' and measure_key = 12
i m getting the following error:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43093] An error occurred while processing the EXECUTE PHYSICAL statement. [nQSError: 17001] Oracle Error code: 936, message: ORA-00936: missing expression at OCI call OCIStmtExecute: UPDATE FT_User_Alert SET Subscription = 'W' where product_key=1 and measure_key = 12 AND UPDATE LU_Monthly_Alert_Budget_Sheet SET Min_Red_Range ='16.0' AND Max_Green_Range ='24.0'AND Max_Red_Range ='27.0'AND Min_Green_Range ='16.0' where product_key='1' and measure_key = 12 . [nQSError: 17011] SQL statement execution failed. (HY000)
SQL Issued: EXECUTE PHYSICAL CONNECTION POOL writeback UPDATE FT_User_Alert SET Subscription = 'W' where product_key=1 and measure_key = 12 AND UPDATE LU_Monthly_Alert_Budget_Sheet SET Min_Red_Range ='16.0' AND Max_Green_Range ='24.0'AND Max_Red_Range ='27.0'AND Min_Green_Range ='16.0' where product_key='1' and measure_key = 12
but when i m ushin the same query in Microsoft SQL Server it executes properly:
please help me out...

There's no valid syntax for this, but there are some tricks you could do to achieve it.
i) You could place an update trigger on TABLE1 to update TABLE2 automatically.
ii) You could define a view across both tables and add an INSTEAD OF UPDATE trigger to it to maintain them.
If I had to do this I'd choose option2, but frankly I'd just be running two updates if it really was me.

Two different table to be printed in smartform

Similar Messages

Maybe you are looking for