Two DVI and one hdmi displays macPro late 2013 6core

Hi all,
if i connect 2 FullHD DVI monitors with passive thunderbolt2DVI adapters,
and an additional FullHD hdmi monitor with an active thunderbolt2dual-link-DVI adapter, would that work?
I can't find any information, if i've to use three active adapters.
Thanks in advance.
Jimmy

This says yes
Mac Pro (Late 2013): Using multiple displays
However, some users have posted that they lost their third monitor after the 10.9.3 update
https://discussions.apple.com/thread/6224241?tstart=0
My still works with 3 1080p or less montors
- One HDMI
- One mini display port to display port
- One mini display port to passive DVI adopter

Similar Messages

Can you connect 2 dvi and one hdmi to the radeon 5770

did anyone try to connect the displays as indicated to a radeon 5770 graphics card in a MacPro 1,1?
Thank you for your replies - George.

Also read,
Mac Pro (Mid 2010), Mac Pro (Early 2009): Issues with three displays and multiple DVI, HDMI connections

Two current input one can display while another cannot

Good evening everyone!
Our group is uing NI 9227 to get current from our circuit. But from the two indicators in front panel, as both of our two switches open, one can display current while another just shows 0.00....
But when I run circuit 2 independently in a new VI, it can display current normally...
Could anyone tell me why and how can I solve this problem??
Thanks so lot!!!

AmeHyesung wrote:
does anyone can help???
thank you all!!!
Use words not letters "NEED hlp Plz R U labview xpert?" Use full English sentences. If you have trouble with this please refer back to speaking in your native language, or go back and take English class.
Source
The VI you posted is quite messy and plenty of places for improvement but I am not convinced that this is the source of the problem. Why are you setting up your DAQ Assistance to be continuous sampling at 100 samples at 100Hz, but then you convert from the DDT to a single sample? If you really want a single sample then take a single sample. I'd also suggest not using the DAQ assistant because it can hide issues like this by using DDT. Still this should prevent you from seeing the right data.
It looks like you have current going into AI0 and AI3 of your device, are you sure this wiring is correct?
With a DMM can you confirm the correct readings going into the DAQ card?
Also you mention running a separate VI and having it work. I don't know how this is possible because one program will lock the current measuring device and not allow that resource to be used anywhere else. You should be generating errors. Which a simple error handler should show you. You should probably add that after the while loop stops.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

If you registrate one Apple ID for each iPhone/iPad, you'll get 5GB on iCloud for each Apple ID, right? I have two iPhones and one iPad with the same Apple ID, why can't I get 5 GB fo each of them?

If you registrate one Apple ID for each iPhone/iPad, you'll get 5GB on iCloud for each Apple ID, right? I have two iPhones and one iPad with the same Apple ID, why can't I get 5 GB fo each of them?

Actually, everyone missed one point, when a device is priced, the cost of icloud storage space for that device is also included in it that is why they are able to give you 5gb each for each user ID, in nutshell there is nothing free coming with apple device purchase, it is paid for. What they are trying by giving only 5gb per user ID irrespective of the number of devices used is pure broadlight looting, they take money from you when you buy each device and give you nothing, This is a case of goods and services bought but not fully deliverd ie apple can be suied for discreminatory treatment towards it's users. I wonder why no one tried this yet in America where everyone sue everyone for petty things..... there is no one to take up this issue? . if tim got any love for the guys who shell out money for the devices his company makes, he should be implimenting this as priority before someone wake up from sleep and sue him.

HT204053 I have two iPads and one apple ID. How can I FaceTime to/from each iPad? Do I need to set up a second apple id or is there a way around this?

I have two iPads and one apple ID. How can I FaceTime to/from each iPad without creating a new apple Id. Anyone know a way around this I.e trying to FaceTime 2 IPads that have the same apple id associated with them?

Have a look here...
setting-up-multiple-ios-devices-for-messages-and-facetime.html

A Tale of Two iPhones and One iTunes

So this little problem has plagued us for years... nearly three to be more precise. We have two iPhones and one PC. Wife syncs contacts with GMail and I sync contacts with Outlook. Funny thing was that the tab for contact sync would not 'stick' with the phone... if I synced mine first, when I plugged hers in it would still be setup for Outlook. Or if I changed it to Google for her and then plugged mine in it wouldn't remember my phone wanted Outlook and would sync with Google. I gave up trying to get it working and setup a seperate profile on the PC for my wife that really was only used for her to sync her phone. The only drawback we could see was we couldn't have a single repository for apps and I had to add music to libraries twice (one for each profile on the computer).
Well, now that we're on the 4S I thought I'd see if iTunes has evolved since 3 years ago when I gave up. I uninstalled all Apple applications and loaded the latest iTunes. The cool part of iOS 5 and the new iTunes is we don't have to connect phones any more So now both phones show up at the same time. I can toggle through all the tabs and see how they differ... different sets of applications are selected, different photo options, music options, etc. EXCEPT the tab with contacts. If I set her phone to google, my phone changes too. I set mine back to Outlook and hers changes to Outlook. We've mixed and matched contacts several times trying to get them to stay in tune and that is a huge PITA to clean up.
I tried the Genius bar. The Genius answer was that we should probably do a restore on the phone. I asked him to help me understand how restoring one phone would solve a problem that existed across 4 phones (two 3G's and two 4S's) and untold versions of iTunes over three years. He just insisted that we probably need to do a restore on the 4S. You know, because that would clearly explain the problem we also had on the 3G. His backup plan was to call Apple support.
So before I submit a ticket to Apple, anyone else able to confirm this limitation? I've checked with my friends and the ones that have iPhones don't sync their contacts anywhere. iCloud will help but we use XP and the PC software requires Vista or better so for now we're still unable to sync our contacts to our PC.
Thanks!
david

On your wife's phone, when you said you've done a restore, was that a restore from backup or as a "new" device? I would suggest deleting the .ipsw file/files on your computer, connecting your wife's phone and restore as "new". When finished, DO NOT SYNC, rather eject the phone and test, verify that all is working correctly. If so, connect her phone & sync her content back.
The .ipsw file is located here, delete all you find, there should only be one:
~/Library/iTunes/iPhone Software Updates
If this works, under preferences, devices, in itunes, delete her backups, as they are most likely corrupted.

TS3367 I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling m

I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling mine.

Each device needs a separate address. Use an email address (gmail.com) on the iPad.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

I have two iPads and one iPod Touch and they are using iTunes on the same computer.

I have two iPads and one iPod Touch and they are using iTunes on the same computer. I have not been able to backup the second iPad. Is there a reason this is happening? iPad one is an iPad 1 and the second is an iPad 2 not sure if this has something to do with it. I just tried to upgrade to IOS 5 and when it went to back up it gave me an error code (-5000). I tried to back up using iTunes and it told me that my backup was corrupted and to delete it and try to back up again. When I went into the device portion where I was instructed to go to delete the backup I found that there was no backup for my iPad just the iPad 1.
I have synced many times and all of the apps, podcasts, music, etc... show up in iTunes, and iTunes recognizes that is is the second iPad but there is not a backup for it.
Any Ideas?

Read this: How to use multiple iPods, iPads, or iPhones with one computer, http://support.apple.com/kb/HT1495

ICloud - have two iPads and one Macbook and want to sync reminders on all three

iCloud - have two iPads and one Macbook and want to sync reminders on all three. I have managed to get the Macbook and one iPad to sync, but wjat about the other iPad?

First check that all your settings are correct, that reminders syncing (calendars on a computer) is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the reminders you are adding are added to your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by checking in accounts on an iOS device by tapping the icon with three lines in the top left corner of the screen, or the right side panel by clicking on the small triangle to the right of the word 'Reminders' in iCal on a computer), non iCloud reminders will not sync.
If you are sure that everything is set up correctly and your reminders are in the iCloud group, you might try unchecking reminders syncing (calendars syncing on a computer) in the iCloud settings, restarting your device and then re-enabling notes syncing.

I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks

I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks

If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured.

Hi. We have two iphones and one Itunes account. How do back up each one without getting the others contacts

Hi. We have two iphones and one Itunes account. How do back up each one without getting the others contacts and without syncing each phone to each other?

Welcome to the Apple community.
Ideally you should each have your own iCloud account, providing you with your own contacts, calendars etc, not doing so will result in exactly what you have experienced. The contacts have likely been lost due to the options you have chosen at the login stage on each device.
Unless you have the missing contacts in a backup file, they won't be recoverable unfortunately. You can add them manually to the contracts that already exist and continue to share the iCloud account if you wish, but I suggest that you each have your own iCloud account.
Note, you can each have your own iCloud account, but continue to share an iTunes account for purchases of apps, books, music, TV shows etc etc.

Three CMs or Two CMs and One SRST Reference

Noticing documentation on CUCM and phone registration stating that a phone can receive "either up to three CUCM servers or two CUCM and one SRST reference." (emphasis mine). Does this mean it is one OR the other; you can either have three CMs in your CM Group or you can have two CMs in a group and one SRST reference? We've normally configured three CMs in a CM Group AND an SRST reference. Suppose I could view a cnf file and look at it myself, but thought it would be good to ask the question here for future reference.
Thanks,
Ryan

That's 3 CUCM servers in the CUCM group + SRST reference.

21/9eme Screen on MacPro Late 2013 ???

Bonjour
Juste pour savoir (Avant de commander car pas trouver d'information)
Est-il possible de connecter un écran 21/9eme sur un MacPro Late 2013 ??? resolution 2560X1080 (LG 25UM65)
et sur quel support HDMI, DislayPort ???
merci de vos reponce.
Translate G..gle
Hello there
Just to know (Before ordering because not find information)
Is it possible to connect a 21/9eme screen on a MacPro Late 2013?? resolution 2560X1080 (LG 25UM65)
and any HDMI DislayPort? holder?
thank you for your reponce.

HDMI works best at up to (but not exceeding) 1920 by1080.
The best way to connect displays to the Mac Pro 2013 is with (Computer-end) ThunderBolt/Mini_DisplayPort <---> DisplayPort (Display-end).
DVI-D
HDMI
DisplayPort
Headphone Out
Audio Inputs

Premiere Pro, MacPro late 2013, AMD Fire Pro 500, editing timeline screen-freeze out.

Adobe Premiere Pro software and my new MacPro with AMD 500 FirePro will not play nice together. Just for the record, I recently purchased two MacPro Late 2013, 6-core, 16GB, AMD FirePro D500, running OS X 10.9.5 systems. We now edit in Premiere Pro through AdobeCloud and have been a buzz about it until we switched to the New MacPro.
Issue: The timeline in Premiere Pro keeps locking up, crashes, displays artifacts in the video and keeps stuttering on top of it in both Mercury PlayBack GPU (OpenCL) and Software modes (both act the same). Searching many posts and possible solutions online to this problem it seems this is a common issue that has yet to be fixed.
I have called both Adobe and AppleCare and both seem to be pointing the finger at each other without admitting any fault what-so-ever. Shame on both of you for ignoring your core base customer and providing a fix. After hours spent on the phone with both companies trying to just get help resolving this issue, with no resolution what-so-ever or any real work-around, it is my opinion that I have been conned.
I have no other conclusion to come to. I generally do not post, mainly because I do not have the time to do so. I prefer searching posts to find a solution or calling the Pro’s to get the answer if I can not find it or figure it out on my own. So sad to say I am now posting for the first time ever because I really do not know what else to do.
As a Director Producer and editor of over 80 stand-up comedy shows that have premiered on the Showtime Network (all edited in FCP 7 and recently in PremierePro over the past 8 years) and who has invested 1,000's if not hundreds of thousands of dollars in product and time into both Adobe and Apple over the past 10 years, I gotta say I am very disappointed in both Adobe, Apple and AMD for what seems to be an unwillingness to admit fault or even acknowledge that this malfunction exists.
Maybe this is just a good old fashion a con? Can't really decide which it is since I feel both conned, let down and deceived into purchasing the new MacPro and Adobe Premiere Pro products with the idea that it would not only make my life easier but would in fact save me money and time. None of which seem to be coming to fruition.
In-fact I have lost a week in time that I will never get back and actual work (files lost) trying to come up with my own solution or work around to what seems to be a design flaw. Not to mention the over 10k we have spent supposedly upgrading to the most advanced and best working machine and software in the industry… right! Is that why these products are called Pro? MacPro, Adobe Premiere Pro and AMD FirePro 500??? Really? This is so not Pro, this has in fact become counter-PRO-ductive.
With the advanced technologies of both these great companies these products are suppose to work as advertised and they do not. Shame on both of you for conning us who are loyal consumers into following you down this dark path while you fight it out and point the finger behind the vail at each other over what I am sure can be fixed, while we the consumer suffer your learning curve or unwillingness to admit fault.
There are thousands of Editors and producers who have been “con"-vinced through great marketing to upgrade to the MacPro trash-can (starting to see why its called that) while trying to adapt years of work through Premiere Pro to have it stop because these three "Pro Companies" can’t seem to get it together. GET IT TOGETHER!!! All of you and get this fixed.
Stop pointing the fingers at each other and get this fixed or years of good will be unraveled. Don't make us all go out and buy custom PC systems that might be faster and better working.
Steve Jobs would have never settled for this mediocrity and unwillingness to admit publicly that something is broken. He would have gotten it fixed and fixed quickly before it even got to this point. Please … Fix this so I can get back to what I do, working on delivering shows and stop forcing me to waste my time writing posts that undoubtably get lost on def ears!
— SM, Director, Producer, Editor and owner of LOL Comedy Inc.

The picture freeze comes randomly so there is no chance of seeing the usage in time and is only in Pr, not the MacPro at all. The time-line picture in Pr freezes and the sound continues to play out. Then when the timeline is stopped and we try and scrub to see movement, the sound scrubs normally but the picture does not. Eventually the clip in that section becomes either a freeze frame for the entire clip or it randomly turns green, sometimes not all green sometimes all green sometimes random lines of color artifacting. Then quitting out of the program is the only way out. Also at this point Pr does not quit completely, we have to do a force quit to shut it down. When it opens back up again the timeline is fine for another 20 minutes or so. Again longest run was about 2 hours before artifacting and freezing out. Also at any edit point, we then have to render to see it play smoothly, it works intermittently sometimes ok for a period of time after the render. Also if there is no render, then there is nothing but stuttering in that area of the timeline which i know is not suppose to happen.
FYI: below is the email I got back from the Support Associate I spoke with at Adobe just three days ago (October 3) who's thought was that it was a system wide problem with the OS X and that I should read his attached link (still no solution) which is also where I got some of my rhetoric about finger pointing and although I made it clear I was on 10.9.5 this link talks about problems with 10.9.3: of course, on the opposite side, the AppleCare supervisor I spoke to later in the day blamed it on Adobe Pr stating that no other program was experiencing these problems. Again no solution and more reason for frustration in my original post.
re: Maveric issues / Abhinav
Hi,
http://9to5mac.com/2014/05/21/os-x-10-9-3-breaking-mac-pro-graphics-card-compatibility-wit h-critical-pro-apps/
Thanks and regards
Ashish Paul
Support Associate

Internal drive for Macbook Pro 13 inch with Retina display from late 2013?

Hi everyone. After some water spillage to my new computer, the guys at the Apple Store have told me that my internal hard drive needs to be replaced. No other damage was done, thankfully. I have a Macbook Pro 13 inch with Retina Display from late 2013. The Apple genius said my current hard drive has flash storage, and that my new hard drive will need that as well as the computer requires it. Does anyone know where I can buy such a hard drive? Is it possible to buy it from Apple? I am happy to buy online or in a store (I live in Australia). Also, is this Mac Pro model difficult to take apart? I'd like to install the hard drive myself.
Thanks in advance to anyone who can help!

From the specs:
STORAGE AND MEDIA
Storage
256, 512 GB, or 1 TB flash storage
Media
Optional Apple USB SuperDrive

Two DVI and one hdmi displays macPro late 2013 6core

Similar Messages

Maybe you are looking for