Two Fields in AFKO Table...

Hi Friends,
Could you please tell me what is the difference between the 2 fields in AFKO Table.
those two fieds are: <b>PLNBEZ and STLBEZ.</b>
My question is: how do we know which field to use and when to use it appropriately.
thnx for the help..

Hi Dev,
Please note that in AFKO tabke
Please check MRP Controller and Planner group AFKO-PLNNR'.
If PLANNR is not maintained entry will bein STLBEZ
Other wise in PLNBEZ.
Hope this will help you.
Lanka
Message was edited by: Lanka Murthy

Similar Messages

  • What is needed for sorting on two fields in a table control

    Hi Everybody
    I am going to certification in a couple of days. I need some help and was hopeing that you  guys could help.
    What is needed for sorting on two fields in a table control?
         One sorted table and two processing blocks
         Two standard tables and one processing blocks
         Two standard tables and two processing
    Which one is corret??
    //Script

    Hi Kimallan
    I am not sure what is meant by a "processing block". However, it seems the question wants the original table order to be preserved. If so; as far as I understood the problem we need:
    itab_proxy[] = itab_main[] .
    "two standard tables"
    SORT itab_proxy BY field1 field2 .
    If we have a sorted table, then it is always sorted by its keys. So, the question seems to become obsolete for that option.
    Hope I've understood correct...
    Regards
    *--Serdar
    [email protected]

  • Compare two fields of one table in selection.

    Dear Experts,
    I want to compare two fields of a table and make selection according to this.
    Ex: simply i want to select the rows from table mard where mard-labst>mard-insme. Could you write me the code to make this selection.

    Yes, Thomas,
    Its working:
    Sample code:
    data: begin of itab occurs 0,
          matnr type matnr,
          ernam type ernam,
          end of itab.
    select matnr ernam
           into table itab
           from mara where brgew > mara~ntgew.
    loop at itab.
      write: itab-matnr.
    endloop.
    Or,
    Try with inner join once.
    Its working: Sample code.
    data: begin of itab occurs 0,
          matnr type matnr,
          ernam type ernam,
          end of itab.
    select p~matnr q~ernam
           into table itab
           from mara as p
           inner join mara as q
           on p~brgew > q~ntgew.
    loop at itab.
      write: itab-matnr.
    endloop.
    Thanks,
    Naveen.I

  • Trigger to concatenate two fields in a table

    Hi
    I am trying to concatenate two column in a table and add to the third column in the same table, all the columns are
    numbers, I want to write a trigger which is after insert to do that..does anyone know how its done...
    thanks a lot
    Jessica

    Hi, Jessica,
    Welcome to the forum!
    Do you really need to store this concatenation? The way you would get these results in a normalized database is to store the numbers separately, and comnbine them, when necessary, in queries and reports. You can use use a view to avoid repeating the same coiding over and over.
    If you really want to store the value, use a BEFORE INSERT OR UPDATE trigger, like this:
    CREATE OR REPLACE TRIGGER     table_x_biu
    BEFORE     INSERT OR UPDATE
    ON     table_x
    FOR EACH ROW
    BEGIN
         :NEW.column_3 := TO_CHAR (:NEW.column_1)
                    || '-'
                    || TO_CHAR (:NEW.column_2);
    END;I'm confused by your exact requirements. Concatentaion can only be done to strings.
    If column_1 and column_2 are NUMBERs, the trigger above will make string versions of those numbers, concatenate them together (with a hyphen between them), and put the results in the VARCHAR2 column column_3.
    So after this statement:
    INSERT INTO  table_x (column_1, column_2, column_3)
           VALUES          (1,     2,       '9-8');the new row will have column_3= '1-2'. (In this case, there is no point in explicitly setting column_3, because the trigger will always set the value based entirely on column_1 and column_2.)
    If you need more help, post CREATE TABLE , INSERT and UPDATE statements, and who what you want the table to contain after each INSERT or UPDATE.

  • How to compare the two same fields of different tables

    Hi can any one let me know the logic for compare the two fields of different tables.

    hi
    good
    IF it_1[] = it_2[].
       " Tables contents are the same
    ELSE.
       " Tables contents are different
    ENDIF.
    If they have different structure, you probably must loop one of the tables, and inside read the other, then compare field by field.
    Or if you don't need the contents (just comparing) you can do this, for example:
    LOOP AT it_1 INTO wa_1.
       READ TABLE it_2 WITH KEY field2 = wa_1-field2
                                field5 = wa_1-field5
                       TRANSPORTING NO FIELDS.
       IF sy-subrc = 0.
          " Record is on both tables (field2 and field5 are the fields in common for both tables).
       ENDIF.
    ENDLOOP.
    thanks
    mrutyun^

  • Updation of Custom Fields in AFRU table Using Customerexit

    Hi all,
    I added two fields in CO11n Tcode using SCREEN EXIT - CONFPP07 and iam trying to update these two fields in AFRU table
    using CONFPP05.  But iam unable to update these two field .
    see this code in CONFPP05
      LOOP AT afrud_tab.
        afrud_tab-zzshift = wa_afrud-zzshift1 .
        afrud_tab-zzoperator = wa_afrud-zzoperator1 .
        MODIFY afrud_tab.
      ENDLOOP.
    Plz help me regarding this..

    Thanks for reply
    Ya i added two fields in confpp07 .
    see the code :
    *&  Include           ZXCOFTOP
    tables : afrud.
    DATA : WA_AFRUD TYPE AFRUD,
            IT_AFRUD TYPE TABLE OF AFRUD.
    Include           ZXCOFU24
    MOVE afrud-zzshift1 TO wa_afrud-zzshift1.
    MOVE afrud-zzoperator1 TO wa_afrud-zzoperator1.
    Even though it is not updating . except these two fields.
    Regards,
    Srinivas

  • F4 help for two fields in screen

    hello,
    I have two fields in my table control which need F4 help in the screen.
    But one F4 search exit is implemented, but it populates only one field.
    but, on clicking f4 for one field, it should populate both the fields together.
    do help me with this issue...
    Can POH in the screen populate up two fields together???

    Hi Krithika ,
    In addition to checking up the export parameters for the Search healp you will have to define the Search Help attachment also. I'll paste the SAP Help Text below but in Simple terms
    You Define a structure with the fields to be returned and define the screen elements based on that structure . So on selection the structure is returned with all values and the screen elements are in referance to structure so all values get posted in screen.
    Here is the SAP HELP part
    "" From SAP HELP
    A search help attachment is an assignment of a search help to a table, structure or data element, causing the corresponding search help to be automatically used to describe the input help process at this field when an ABAP Dictionary field is used in a screen.
    You can attach a search help as follows:
    1. Attach a search help to a structure or table field: The attached search help is available for all screen fields that refer to the table or structure field. There must be an assignment between the interface parameters of the search help and the fields of the table or structure for this type of attachment. In the input help process, this assignment results in a value transport between the corresponding fields (if they are known at least to the module pool of the screen) and the search help parameters. As for the foreign key definition, you can assign nothing, a constant or any other field (which is then sought in the module pool) to indivdiual search help parameters.
    2. Attach a search help to a table: The assigned search help is available for all screen fields for which the table is a check table. There must also be an assignment between the search help parameters and the key fields of the table for this type of assignment.
    3. Attach a search help to a data element: The attached search help is available for all screen fields that refer to the data element. If the search help is attached to a data element, an export parameter of the search help must be assigned to the data element. If the user chooses a row of the hit list in the input help, the contents of this parameter are returned in the corresponding screen field. More than one value is not returned when a search help is attached to a data element.
    The described attachments only take effect if the field was not yet assigned an input help in the screen definition. Such an assignment can be made with the mechanism PROCESS ON VALUE-REQUEST in the flow logic or by attaching a search help to the screen field in the attribute maintenance screen. A F4 help can also be assigned to the field in the flow logic by using VALUES or SELECT. In the latter case, the input help here behaves as if the table specified under SELECT were assigned to the field as check table.
    If more than one of the described mechanisms compete in defining the input help method of a screen field, the first one named will take effect. If none of the described mechanisms is available, the domain fixed values of the field will be used for the input help if necessary. If the domain of the field has no fixed values but has data type DATS or TIMS, the input helps that are assigned to these types are used for the input help. Otherwise there will be no input help available for the field.
    A search help attachment always belongs to the definition of the object to which the attachment is made (structure, table or data element). It is also maintained in the maintenance transaction for this object and transported with this object.
    <b>REWARD IF USEFUL. It Works for me here..get back if any doubts.</b>

  • How to group from two fields?

    Afternoon all,
    Any ideas how to group a report by using two fields in one formula?
    I have two fields in a table
    1: Stock_Code
    2: Misc_Code
    I need to group my report by Stock and Misc code combined. How would I be able to do this by using formula?
    Regards
    Jehanzeb

    See I tried that already pandabear however for some reason it doesn't bring the results from both fields. It is only bringing results from one field.
    The report criteria is
    {lab_credits.date_created} in date(2007,01,01) to date(2007,12,31) and
    {lab_reasons.reason_code}={?Reason_Code}
    the formula I used initially was
    {lab_credits2.stock_code}+{lab_credits2.misc_code}
    but then tried
    {lab_credits2.stock_code}+ " " +{lab_credits2.misc_code}
    however both didn't seem to work under the above conditions.
    The output should be
    5-760
    7-240
    7-250
    7-821
    AR
    CARR
    GLAZE
    TINT
    U-113
    U-114
    Where 5-760 and U-113 data is coming from stock_code field and AR to TINT is coming from Misc_code field.
    The output is ignoring the Misc field values under the given criteria.
    Regards
    Jehanzeb

  • Two fields about material in AFKO: PLNBEZ and STLBEZ,what's the difference?

    Two fields about material in AFKO: PLNBEZ and STLBEZ,what's the difference?
    correct answers will be rewarded.
    thanks in advance

    Hi,
    First of all AFKO is table for Production Order Master Data. So it covers all data related BOM , Routing etc. So In order to distinguish material field related to BOM & Routing  these two different fields are there in AFKO table.
    PLNBEZ is the field for material assigned to routing operation
    STLBEZ is the field for material which is part of BOM
    Hope this clears your doubt.
    Regards,
    Tejas
    Edited by: Tejas  Pujara on Oct 8, 2008 8:22 AM

  • How to get different field in two are more different table using open sql

    Dear all,
              This SenthilMani am very new into sap abap am having doubt in reports how get the different fields from different tables like mara,marc,mard using open sql and native sql program give me some tips to get the data .
    with regards,
    senthil

    HI ,
      1) If u want to select data from more the two table then u can use FOR ALL ENTRIES.
             EX ..Open sql
                       select matnr from mara into table t_mara.
                      select matnr werks from marc into table t_marc for all entries in t_mara where matnr = t_mara-matnr.
      2) U can join more than one table.
               ex:
                   select mara~matnr
                              marc~werks
                    from mara join marc into table t_maramarc
                     on maramatnr = marcmatnr
    3) Using  native sql  ...only u can use JOIN statement

  • Dynamic value help for a table field to fill two fields, how to?

    Hi all gurus,
    In SRM 7 I defined a dynamic value help for a single field (ZZ_PROLE_R3) of my header custom table.
    That's the code from WDDOMODIFYVIEW in the webdynpro /SAPSRM/WDC_DODC_CT, view V_DODC_CT:
    DATA: lo_tabnode        TYPE REF TO IF_WD_CONTEXT_NODE.
          DATA: lo_tabnode_info   TYPE REF TO IF_WD_CONTEXT_NODE_INFO.
          DATA: tab_value         TYPE WDR_CONTEXT_ATTR_VALUE_LIST,
                wa_value          TYPE WDR_CONTEXT_ATTR_VALUE.
          lo_tabnode = wd_context->GET_CHILD_NODE( name = 'THCUS' ). "the custom table node
          lo_tabnode_info = lo_tabnode->get_node_info( ).
          wd_this->GET_VALHELP_ZZ_PROLE_R3( EXPORTING iv_guid = lv_guid
                                            IMPORTING ZZ_PROLE_R3_VALHELP = tab_value ). "this method returns the dyn value table
          lo_tabnode_info->set_attribute_value_set( name = 'ZZ_PROLE_R3'
                                                     value_set = tab_value ).
    The method GET_VALHELP_ZZ_PROLE_R3 dynamically builds the value help table tab_value; such table is made up by two fields:
    value : contains the value of the field
    text   : contains a description of the value
    The above solution works; now I'd like to enhance it. The custom table THCUS contains also a field called ZZ_PROLE_R3_DESC, which represents the description of ZZ_PROLE_R3. It is, exactly, the TEXT field in tab_value.
    So I'd like to do as follows:
    - the user clicks on the search help for ZZ_PROLE_R3 field of the table;
    - the above described value help appears;
    - after the selection, both ZZ_PROLE_R3 and ZZ_PROLE_R3_DESC are filled with the selected couple value - text chosen from the value help.
    Could anyone help me achieving such a behaviour?
    Again, a little request... when I open the above value help dialog box, the window itself has a label "Floorplan Manager application for OIF.." that obviously I'd like to redefine (e.g. "Role selection value help"). Is there any way to do that?
    Thanks in advance

    Chris Paine wrote:
    It seems to me - given that your code is in wddomodifyview that you are trying to have different dropdowns per row
    - I'm not sure where you are populating lv_guid - but I'd guess it is an attribute of the row selected? If it isn't then I can't see any reason that you would do this code in wddomodifyview and not wddoinit.
    Hi Chris and thanks for your help,
    lv_guid is the GUID of the document's header; I need to pass it to the method that populates my value help table because the values in it are derived from some fields on the document. (the situation actually is more complex; there's an RFC call on the backend for which the document is intended for to retrieve the data that populate the value help...).
    I'm quite unexperienced on webdynpro and terminology; if dropdown menus are fixed selection option that appears on a field, I guess this is not my case. I did a pair of screenshot to provide an idea of what the solution by now is, and what "I would like to have":
    [Pre-selection (F4 icon on the field in table)|http://imagebin.ca/view/npIsaqF.html]
    [Value Help popup for the field ZZ_PROLE_R3|http://imagebin.ca/view/8fZUh3T.html]
    [Result by now |http://imagebin.ca/view/3PaqdvE.html]
    [Result I'd like to have.|http://imagebin.ca/view/dExR0J.html]
    Chris Paine wrote:
    However - by your comment on the "value help dialog box" I am guessing you are using an input field? If this is the case then I would strongly suggest that you change/enhance the structure of the context node THCUS (btw, better coding practise to refer to it as wd_this->wdctx_thcus when using the get child node construct) so that you refer to an actual SAP ddic search help, if you then associate in the structure the value and text fields then populating the text field should happen automatically. Also you'd have the nice side effect that your value help dialog would be named after the associated ddic search help.
    Thanks for the code suggestion, I'll apply that. For what concerns the context node THCUS... It is, by standard, a node which I can't explictly find in the context for the view V_DODC_CT. The problem is that ZZ_PROLE_R3 and the corresponding description field ZZ_PROLE_R3_DESC of the table must be filled with data retrieved dynamically @ runtime from the backend. So I guess I can't populate a val help referring to a dictionary table/field; I'd rather do as follows:
    - retrieve what's the target backend for the document (to do so, I have to process the document .. that's why the header guid passed to my method);
    - RFC call to a custom method that extracts possible values for the specific backend;
    - bind the ammissible values to the value help.
    Chris Paine wrote:
    I realise that this is rather a lot - so if you have any specific question please do respond - hopefully I or someone else will be able to clarify.
    Thanks again for your help; additional info as well as code examples would be highly appreciated

  • Name of the table where can get the two fields Valid-From and Valid-to for

    Hi gurus
    I want name of the table where I can get the two fields Valid-From and Valid-To and their relation ship with the header table in BOM
    Regards
    Kaisar

    You can only get the Valid from date from the table STKO.
    To get the valid to date, you have to take one day less than the valid-from date of the next record for the same BOM.
    Alternatively use the Function module:
    CSAP_MAT_BOM_READ
    It will give both valid from and valid to dates in the tables parameter: T_STKO
    Regards,
    Ravi
    Edited by: Ravi Kanth Talagana on Jul 2, 2008 4:37 PM

  • How to calculate value based on two fields & set that on the 3rd (in table)

    Hi OAF Gururs
    I have a requirement in which, in an OAF page, the user can add a row in an advanced table and they enter
    the values for two fields say 'rate' and 'entered amt' and immediately on tab out, the 3rd field should be popluated as rate*entered amt.
    Is there a way, we could capture the tab out event? Or any way we could achieve this?
    This is really urgent.
    If anyone can help.
    Thanks!
    AJ

    OAF gurus hang out over in {forum:id=210}

  • Can not see two fields in Crystal 2008 Developer explorer/designer view

    I am currently developing crystal 2008 reports against the salesforce.com database using version 12.0.0.683 CR Developer Full version. I am using an updated driver that was provided in July or Aug 08 in order to view self referencing fields. The problem is that when I try and report against one of the tables (lead history) I cannot view two of the fields (New Value and Old Value)? I can see these two field (New Value and Old Value) in the database expert as the last two fields in the actual table, but the two fields are missing when I go into the explorer/designer view. In Salesforce, these two fields can not be filtered on, but I can export all the values in this table using Salesforece Apex data loader.

    Please re-post if this is still an issue to the OnDemand Forum or purchase a case and have a dedicated support engineer work with you directly

  • F4 help for a field in item table in a view cluster

    Hi All,
    I have a view cluster with two tables. I should provide F4 help for field in item table based on the selected row of the header table.
    F4 should have only values fetched based on the header table entry.
    How can i achieve this. Please suggest.
    Regards,
    Kusuma K.

    Hi amar_war,
    use screen painter to edit the screen layout where the field VKBUR is on. Double click the field to get the details screen. Here you can attach a search help to the field.
    H_TVBUR has no more parameters, it will display a list of al sales offices with description text
    H_TVBVK will also show the sales group, if VKGRP is a screen field, it will restrict the result list automatically on matching VKGRP.
    H_TVKBZ has also VKORG VTWEG SPART - it will take those values from screen if filled.
    If you are not satisfied with the results, you can easily create your own search help using own selection method and own search help exits if required.
    Try standard search help for standard field first.
    You can create a copy of VKBUR as ZVKBUR and attach search help there, you can create your own screen structure and attach the search help there - 50 ways to get your search help...
    Regards,
    Clemens

Maybe you are looking for