Two mac mini and raid 1

Hi All,
Two mac mini with thunderbolt cable connecting, the second mac as external hard drive.
Set on the first mac RAID 1 with the second mac...
When the first mac fails, the second one can directly be started.
Is that even possible?
Thank you!
michael

Yes it is.
You will need to boot from a third temporary drive to first setup both Mac minis as a RAID 1 mirror.
Note: This will destroy any data on both Mac minis.
After building the RAID 1 then you can install Mavericks on to the RAID.

Similar Messages

Connecting two Mac minis and using one monitor

I am thinking about getting two Mac minis to run concurrently, accessing both on the same Thunderbolt Display (also to be acquired) using screen sharing and connecting the two Macs via firewire (or thunderbolt).
I have certain programs I need to run in Windows (Bloomberg terminal and MS Excel in Windows version) but don't want to run them in parallel on one computer as (in my experience) the performance is very slow.
By running two computers at the same time, I'm hoping that can avoid the entire system griding to a halt. I also think it will allow me to upgrade more cheaply as the Mac mini is improved over time.
Is this a completely daft idea? Would I be better off with a new iMac or a refurbish Mac Pro?
Any feedback is welcome, even of the abusive variety.

"File sharing preferences" is indeed how to do it. Connect both minis to your router (one by ethernet cable, one by wifi, it doesn't matter.)
Then turn on "File Sharing" in Sharing Prefs on both minis. Also, give them both meaningful, different names under "Computer Name".
Then, when you open a finder window on one mini, the other one should appear under "Shared", like this:

Two Mac Minis one with Airport and one without..and an Airport extreme

Please advise..I have two Mac Minis. One is older with no Airport card and one is newer and came with an air port inside. I also have an Airport Extreme and A Speedstream 5100 Ethernet ADSL modem. Here's the deal: I connected the old MacMini with no airport to the AirPort Exreme via LAN port. I also connected the Speedstream 5100 modem via ethernet cable to Airport Exreme. I can get onto the internet on the old Mac Mini with this set up. However, I cannot get the new Mac Mini's Air Port to work or "see" the network. Not sure what to do next...

I also connected the Speedstream 5100 modem via ethernet cable to Airport Exreme.
Just to double-check. Do you have the Speedstream connected to the WAN (circle-of-dots) port on the 802.11n AirPort Extreme Base Station (AEBSn)?
However, I cannot get the new Mac Mini's Air Port to work or "see" the network.
Which radio mode to you have the AEBSn configured for? The default is "802.11n (b/g compatible)". Also, which wireless encryption are you using? Do you have the AEBSn configured to not broadcast its Network Name (SSID)? ... or using MAC filtering?

My wife and i both have an itunes library installed on to our separate pc's, we are now de-commissioning the pc's and are moving over to a single mac mini, can we install both libraries on to the mac mini and run them as separate libraries?

my wife and i both have an itunes library installed on to our separate pc's, we are now de-commissioning the pc's and are moving over to a single mac mini, can we install both libraries on to the mac mini and run them as separate libraries?

graham218 wrote:
are moving over to a single mac mini, can we install both libraries on to the mac mini and run them as separate libraries?
Generally YES.
It's possible to hold separate iTunes library's on a single machine.
Generate two new folders inside the Music folder of the Mini and name them differently; e.g. man and woman.
Copy your whole library into "man" and your wifes into "woman"
Go to sharing in the system settings of the Mini and share the Music folder in your network.
After copying the whole library's to the Mini you may point iTunes to the new location at startup by holding the option key (alt) at the keyboard.
iTunes will then ask you where the library is located.
Point it to the matching library on the Mini.
That's all.
Lupunus
PS ... If you both use only the Mini you have to setup a user account for each and just copy the whole library to the Music folder in particular.
Message was edited by: lupunus

I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro. Does anyone know how to do this?

I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro. Does anyone know how to do this?

1. Remove the drives, install them in external enclosures.
2. Use a Firewire cable to connect to your computer. Boot the mini into Target Disk Mode - Transferring files between two computers using FireWire

I have a mac mini and just purchased a moshi hdmi connector for my LED TV. The problem is, I wanted to be able to take my mouse from one screen to another, not just as a mirror image! Is it possible to do this some how?

I have a mac mini and just purchased a moshi hdmi connector for my LED TV. The problem is, I wanted to be able to take my mouse from one screen to another, not just as a mirror image! Is it possible to do this some how?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
If you have two displays attached, then the function to change from mirrored to extended Desktop will appear in System Prefs/Displays.

Problem with Mac Mini and Panasonic PT-AE700 projector

I just bought a brand new Mac Mini and intended to connect it through hdmi to my Panasonic PT-AE700 projector (with a 10 m hdmi-hdmi cable and a dvi-hdmi adapter). However there is no signal recognized by the projector.
Any suggestions? I have tried with two different dvi-hdmi adapters between the Mini and the cable. Both work fine with my MacBook Pro, but with the Mini there is no signal.
Mac Mini Mac OS X (10.4.7)

Thanks again BSteely for your answer.
Unfortunately I still haven't been able to get anything out from the projector through HDMI.
However, I've found someone with a similar problem. It seems the problem is the lenght of the HDMI cable (which in fact is closer to 15 m than 10 m). HDMI is designed to handle at least those 10-15 m runs, but the problem seems to be DVI, which is only capable of something around 5 m. Since I'm converting from DVI to HDMI, I'm subject to DVI's limitations. And the MBP seems to have better capability of handling the weaked signal than the Mini.
Read more: http://www.avsforum.com/avs-vb/showthread.php?t=712218
Gefen should have an amplifier (HDMI Super Booster) that could solve the problem. I just ordered it to see if it could help in strenghtening the signal and solve the problem for me.
Read more: http://www.gefen.com/kvm/product.jsp?prod_id=2939
If someone has any experience from the booster, please let me know.

Mac Mini and USB 2.0 hubs (hubs stop working within a month)

I have an aluminum Mini running OSX 10.6.6 (Snow Leopard). With only 4 USB ports, I have need of a USB hub to accommodate my external drives and other peripherals: keyboard/mouse, camera and iPhone have to use the existing ports in the Mini (difficult access to ports due to space limitations), leaving one port for up to 4 external drives (older drives 40-60gb used for backup and extra storage).
I have problems using powered USB 2.0 hubs with this computer; I have 'burned out' 2 hubs since buying the Mini in February. They just flat out stop working, though they still show power (the power indicator light on the hubs); no peripheral is recognized when plugged into the hub (which worked fine for about a month). I can unplug the 'must use Mini ports' (camera, iPhone, charger, etc) and the peripheral drives are recognized and work normally when plugged directly into the Mini ports.
One hub was a Belkin 4-port hub (about 1 year old) and the other was a GE 3-port hub with several flash card readers (19-in-1 card reader), also about a year old. Is there any reasonable explanation why powered hubs would suddenly stop working, related to use with the Mac Mini 2010 aluminum version?
I had worse problems with the USB ports in an old (~2006) Mac Mini (out of warranty), where the USB ports in the Mini stopped working, which is partly why I bought the new mini. In light of this tidbit, (be honest, please) are there known issues with Mac Minis and USB?

Each of the external drives has its own power supply; I generally only use one drive at any one time, but on rare occasions I have powered up more than one to confirm or transfer files. I don't leave any of those drives on when not in use, and when everything is working I properly eject/unmount them before turning them off.
There have been times when I powered up a drive connected to a powered hub and both the hub and the drive indicated activity but the drive didn't mount. On those occasions the drives sometimes would not appear in Disk Utility, and other times would appear, but would not be "mountable". I didn't know what the best way to deal with that was, so I would just turn the drive off, hoping the lack of mounting on the desktop meant no real drive activity was occurring and I wouldn't risk data loss or drive damage. So far all the drives seem to work fine when plugged directly into the back of the mini.
The main external hard drive I was using when the Belkin hub failed (iomega 40g) is USB 2.0 only (no firewire). I have another drive that is only firewire (la cie 60g)... so it wasn't a factor. Two other external drives are ACOM, one 40g one 120g, and then there's my old iMac G5 disk (display fizzled and everything but the disk recycled through Apple's recycling program) which is mounted in an external enclosure and is part of the USB contingent, but is not being used for anything but backup (all three both USB 2 and FW400 capable). (I know, too many toys... but why throw them out?)
The USB hubs both had their own power supplies, too, and I never used them without power (though I tried it as part of troubleshooting, before reading the Apple article on USB and power requirements). Other USB devices that only work when plugged into the mac directly are my Epson Stylus CX4800 all-in-one, and my Radio Shark.
So, whaddya think? Should I risk buying another powered USB hub or just live with plugging in peripherals to one available USB port (through a short USB 2.0 extension) and only use one at a time? That would be a bit of a pain, but if there are no issues you've heard of with Mac USB ports (several unanswered questions in the Mini Support forums here involving USB and peripherals, I noticed), what else would explain the seemingly short lives of USB hubs?
Oh, here's something I just remembered: the last time the Belkin hub was working (last night), I had my Radtech BT mouse charger cable plugged in (not charging, mouse not attached) along with two of the external hard drives, and my Fuji camera USB cable. I got an error message onscreen (on the Mini) that a drive had been improperly ejected (or put away?), yet the hard drive in question was still mounted on the desktop. I looked at the hub, and the loose ends of the charger and the camera USB cable were touching. Could that have caused the error (and maybe the hub to fail)? (Edit: the camera cable I think was plugged into the mini's one available port; 3 external drives and the mouse charger were plugged into the hub, _but only one drive powered up and in use (3rd edit)_. The camera end of its USB cable contacted the mini-plug end of the mouse charger... could that have short-circuited the hub? +That wouldn't explain the failure of the GE hub a couple weeks before... but I don't know if any of this is connected, so to speak--2nd edit.+)
Message was edited by: blick
Message was edited by: blick
Message was edited by: blick

Airport Express problems with new MAC MINI and DLINK router SOLVED

Hi just thought I would post this as it may well help others experiencing similar frustrations with new core duo mac mini and wireless connection or quality problems across the network / internet etc
I have a 3 week old, new mac mini core duo 1.8ghz 2gig ram, 120gb disk - First Mac, connecting to my exisiting wireless network via DLINK ADSL Router 2MB Broadband also one windows laptop and pc also wireless on the network and two airport express potins to stream itunes to
Problem was briefly
Mac worked fine, but the network connection just far too slow, laptop and pc, 1800+ kbps downstream mac mini 90 - 150kbps (http://www.adslguide.org/tools/speedtest.asp)
also if i ping the router directly from terminal (ping -c 20 192.168.1.1) average response 12+ ms with 20% packet loss, yet laptop and pc avg 2ms no losses
Spent 2 evenings on frustrating calls of more than 1 hour each (due to being cut off , then ring back and closed etc etc) and carrying out a the helpdesk troubleshooting (I am an IT consultant I think I am above this level), eventually an archive and install of the os as well
last night I call for the third time, insisting I dont wish to carry out any further troubleshooting, and want it replaced and resolved or my money back
I receive a call back from product specialist (not sure if thats mac mini specialist or airport) but we resolved the issue (his knowledge far superior to the help desk do this do this attitude)
between us we carried out the folowing and resolved the problem and I am now very happy
mac now downstreaming also in excess of 1800kbps (as expected for 2mb broadband)and no packet loss
This problem was resolved by switching off the turbo option hidden away in the routers settings, under wireless configuration
Supposed to improve performance, but its rubbish and will make hardly any difference under mac os to the speed but will certainly affect your mac mini performance(you may have a similar setting switched on in your routers and mac os dont like it)
We stumbled across this by first disconnecting one of the airport express devices from my dlink network, and using it on its own default apple wireless settings, effectively making it a standalone wireless network, and not via the dlink router
we then carried out the same ping with the ip address of this device (from airport admin utility default 10.0.1.1) and the results were fantastic 2ms avg no package loss
this established it was something with the router, and how we then interrogated the routers settings and found the turbo on option within wireless configuration
you may not be able to replicate this if you dont have an additional network you could join (such as airport express), but probably worth checking your own router settings for something similar
Hope that may be of assistance to others, sorry that its a bit long winded and garbled, but I'm just so excited to finally get my new mac working as i would expect it to
Also perhaps insist on speaking to a product specialist immediately that the helpdesk are unable to help you

Hello macfar14. Welcome to the Apple Discussions!
For just streaming iTunes and/or for sharing a USB printer, the AirPort Express Base Station (AX) just needs to be configured as a wireless client ... which you already attempted to do.
Just to be sure nothing was missed, here are the basic steps to do this:
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing wireless network's Network Name or SSID>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

Hello, I just bought a 2013 Mac mini and I cannot get the sound to output to my Dell U2713HM monitor. I went to sound output but even though my Dell shows up there when I select it there is no sound output to it. I am using a mini DP to DP cable...

Hello, I just bought a 2013 Mac mini and I cannot get the sound to output to my Dell U2713HM monitor. I went to sound output but even though my Dell shows up there when I select it there is no sound output to it. I am using a mini DP to DP cable...Any ideas? Thanks

Hi Alxx911, and John Hammer1. After reading John's reply - " You can plug something into it's headphone jack. though" . I thought i'd try out of curiosity. I plugged in some headphones. I didn't expect anything to happen and nothing happened. The audio jack is for the Dell soundbar which is optional.
Here's a direct copy and paste from the users manual: Section About Your Monitor.
Attaching the Soundbar AX510 / AX510PA (Optional) CAUTION: Do not use with any device other than the Dell Soundbar. NOTE: The Soundbar power connector (+12 V DC output) is for the optional Dell Soundbar AX510/AX510PAonly. To attach the Soundbar: 1. Working from the back of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom of the monitor. 2. Slide the Soundbar to the left until it snaps into place. 3. Connectthe Soundbar with the DC power connector. 4. Insert the mini stereo plug from the back of the Soundbar into the computerís audio output jack. For HDMI/DP, you can insert the mini stereo plug into the monitorís audio output port. If there is no sound, check your PC if the Audio output is configured to HDMI/DP output.
This monitor has no speakers. (Like John Hammer1 mentioned). The no speakers feature was one of the reasons I chose this monitor.
Good Luck !

How do I sync files on Mac mini and MacBook pro

I want to sync files between my Mac Mini and my MacBook Pro. Is there a way to do this? Primarily, I want to access photos in my LightRoom Catalog from both platforms. Thanks for any help you can provide.

Note that there's a difference between sharing and syncing.
Sharing will allow you to access the files on your Mini from your MBP, but the files won't be on your MBP when you take it somewhere else.
Syncing is making both Macs have identical copies of files, so that a change on one Mac makes a change on the other Mac.
If you've got a large LightRoom catalogue and limited space on your MBP, then you want sharing. The link above should get you started with that.
For syncing, I recommend BitTorrent Sync, which is free. It's basically "DropBox without the cloud". You select a folder to sync, and then whenever your two Macs are on the same network, any file in that folder that changes is synced to the other Mac.
I use it to keep my entire Documents folder synced between my Mini and MBP.
http://www.bittorrent.com/sync
You may need to be careful about modifying the same document on both computers at the same time, though I believe BS does handle this in some way. Also, if you're syncing an app's data library, then some database files (e.g. with computer-specific data like file path names) may not sync well.
Of course, you could use DropBox, though you'll need to subscribe if you want more than a couple of GB.

Bridging the gap between Mac Mini and iMac

Does anyone agree that Apple needs to add another model between the Mac Mini and the iMac? I think they need something like a Mac Mini Plus. Two models, one with the 1.83GHz Core Duo and one with the 2.0GHz Core Duo. The unit itself would be slightly larger than the standard Mini and include a PCI Express slot with several video card options and a faster (7200RPM) hard drive. Personally, I hesitate to buy an iMac because of the built in monitor. I would prefer to buy a separate LCD flat panel monitor that I could keep for years and use with different Mac models as I upgrade. As for the current Mac Mini, it's video and processor options are on the low end, albeit perfect for the casual user, but for someone that wants to do some gaming or video editing, they don't quite cut it.
Don't get me wrong here, I love the elegant design of the iMac, but I think Apple needs to offer something that allows us to have the iMac equivalent computing power without the built in monitor and without having spend a thousand more on a PowerMac.
Athlon XP 1800+ Windows XP Pro

Yes, I'd love something in the form of a Mac Mini that was closer in spec to the iMac.
Honestly, the only reason I won't buy an iMac CoreDuo is the built-in monitor.
And, the only reason I won't buy a new Mac Mini is that they are underpowered.
I have owned two iMac G5 systems, and both had serious faults with their built-in LCD panel.
The first would permanently etch in anything on the screen for every hour of intensive use.
It wouldn't etch it in in normal use. But, if I did any of my audio work, it would heat up the system so hot that the image on the screen would literally cook into the LCD panels plastic surface.
It literally looked like you took a razor blade, and precisely carved the exact image into the surface of the screen. Pretty nasty looking. Nothing would get rid of it, and it would happen every time I did my audio editing / processing work for an hour.
Naturally, the more work I did, the worse it got. I only got two editing sessions out of an LCD panel before having it replaced.
After going through that for a while, I sold the system after having a fresh panel installed under warranty.
I got tired of damaging the screen after every hour of work.
The second iMac G5 was purchased a year later. That one also suffered permanent damage to it's LCD panel. But, not quite as noticeable.
I know that there are a bunch of people getting ready to hit me with the "Image Persistence" explanation. But, trust me, I know about Image Persistence, and this wasn't it.
I was seeing actual permanent screen burn-in (which is not supposed to happen on LCD panels).
The service tech was absolutely amazed at the appearance of my screen. And, yes we verified it was the actual panel that was damaged. He wouldn't replace it without verifying that it was the panel itself.
Anyway, I called to arrange service on the second system again, and before I could get it in there, the backlight started flickering. And, I had already had tons of other stuff fixed on the machine. So, I sold it and bailed-out.
Now, after all the problems I've had with the built-in screens on the iMac G5 systems, I don't want another Apple product with a built-in screen. I want to use my own LCD panel.
I have an LCD panel that I'm using now. It's about 3 years old, and only cost me $200. And, it doesn't have even the slightest indication of image burn-in or image persistence. I use it every day, and use it just like I did the iMacs.
So, what I want now, is a machine comparable to the iMac CoreDuo, but without the built-in screen.
The current Mac Mini's cost way too much for their very low specifications.
I already have a Mac Mini G4. It's underpowered as well. But, no worse-off than the current Mac Minis.
Now, if Apple produced a Mac Mini with identical specs to the iMac, I'd gladly buy it.
Even better for them, I'd pay the same price as the current iMac to get it without the built-in monitor.
Yes, that's right, I'd pay the full price of the iMac to get a Mac Mini without a monitor if it was of the same specifications otherwise.
The current Mac Mini is obviously stripped-down to prevent competition with the iMac. But, I think they'd find that they would simply expand their user base if they offered a better Mini.
With their product line as it is, the current Mac Mini is not a compelling machine, and the iMac is not an option because of it's built-in monitor.
Get me a high-end Mac Mini and you've got a sale.

Two Mac Computers and Time Capsule can't network all

I have two Mac computers, a Mac Mini and a MacBook Pro. I also have a Time Capsule. For some reason I can only connect from my Mac Mini to the MacBook Pro, but not from the MacBook Pro to the Mac Mini. On the MacMini, when I go to Go menu in the finder and then Network, I see the Time Capsule and the MacBook Pro. If I want to go the other way MacBook Pro to the MacMini all I see when I go to Go menu in the finder and then Network, is the Time Capsule. I have searched all over the internet to find an answer to fix the problem but I have not found anything. Help! Please.

Well, I wrote my question at 2am after hours of experimentation. The next day all seems well. It seems changing the broadcast frequency worked, but they needed time to decide they liked each other. I wish I'd known that 6 months ago! It was weird because when I first plugged the time capsule on this time it seemed the MacBook detected it just fine. Then I worked to get the internet connection going and it all went sideways. Very mysterious. Thanks for reading.

Is it possible to run dual display monitors on a KVM switch between my mac mini and a PC desktop?

I have two 23" monitors utilizing DVI that I currently have plugged into my PC desktop. I'd like to purchase the mac mini and utilize the same monitors for both systems and switch back and forth between the two. So, I'm wondering if it's possible. The only two hangups I can anticipate is dual display capability on the mini (I expect that some adapter will be necessary), keyboard compatibility between the two systems, and finding a switch that will handle all the above. Any help would be greatly appreciated!!!!

I think this video could help you
http://www.youtube.com/watch?v=IYoC2teAbmE
Other question is the switch box, You will have eight income cables (4 video, 4 usb) and four output cables
http://www.showmecables.com/viewItem.asp?idProduct=10778
http://www.networktechinc.com/pdf/cat-kvmsplit-usb-hdmi.pdf

Mac Mini and WoW???

Hi all,
Will a Mac mini run World of Warcraft smoothly?

My son has been running World of Warcraft on his 1.83 Intel Mac Mini and it runs good for the most part. The Wrath of the Lich King expansion seems to tax it a lot more in major cities but we have been in raids together and it is acceptable enough with the settings lowered. The mini is a great machine but I would not recommend it for gaming.

Two mac mini and raid 1

Similar Messages

Maybe you are looking for