Two MI Clients running on the same system

Hi All,
I have a MI Client running on my desktop.
I want to install another MI Client without uninstalling it i.e. I want to have two running fully functional MI Clients on my desktop.
Is this possible, how do I do it?
Ankur
(Both MI Client are of the same SP level)
(I tried to rename the existing MI root folder and then running the setup.exe of MI client, then I cut&pasted the whole MI root folder into my D drive and then tried running the setup.exe - both times when I ran the setup.exe it asked first to Remove my current installation... )

Hi Ankur,
Please follow the instructions mentioned in the following guide to achieve what you wish to do.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fecd11da-0801-0010-0da2-ffee3d04684f
Best Regards
Sivakumar
PS: Forgot to mention one additional stuff. I you plan to run both the clients simultaneous, then you need to change the tomcat port on the client since two clients cannot share the same port. To change the port of the client do the following.
Under your MI home folder go to "CONF" directory and open "server.xml" file and in here change the following value from 4444 to any other value. (4444 is the default port)
<Parameter name="port" value="<YOUR NEW PORT NO>"/>
Similiarly add the following properties in the MobileEngine.config file present in the SETTINGS folder of MI Client.
MobileEngine.Runtime.Port = <YOUR NEW PORT NO>
MobileEngine.Jsp.HomeUrl = http://localhost:<YOUR NEW PORT NO>/
Add a file named port.txt in the MI Home folder and in it mention <YOUR NEW PORT NO> without any other values.
Edited by: Sivakumar V on Aug 25, 2008 4:33 PM

Similar Messages

Having two oracle clients installed at the same time

Hi, I was wondering if there is a way to have two oracle clients installed at the same time on one computer, and if there is a way to be changing the default client between the two. I need to have installed the oracle client 10g and 8 versions on the same computer, because we have a problem with a legacy application that for some reason only works with version 8, and we need the 10g because our new applications requires 8.1 or later. We are still migrating to the new system but we developers need to have the two clients. Any help is appreciated. Thanks in advance.

Is it possible, sure.
Technically, clients before 8.1.5 were not multi-home compliant, so having Oracle 8 and Oracle 10g clients on the same machine is almost certainly not supported. On the other hand, I know that a number of developers at Oracle had combinations of Oracle 7 clients Oracle 8 clients, Oracle 8i clients, and Oracle 9i clients on their development machines at the same, so you shouldn't have too many major issues.
Most "default client" issues come down to which ORACLE_HOME is first in the system's PATH. Ideally, you would leave the Oracle 8 ORACLE_HOME first in the path and explicitly reference the 10g ORACLE_HOME when configuring anything that relies on the 10g client.
Justin

Two seperate animations running at the same time

Hi
I would like to make a fully automated presentation, with some object moving and the like... I am trying to have two seperate animations running on the same slide. The animations are quite simple - move in, move around, move out. What I would like is that they both act seperately so they start at the same time, but otherwise begins to move at different times and exits at different times. I'm having trouble achieving this as i can only link automatic actions to the last action on the list (i.e. I can't have two trees of actions that start simultaneous)
I hope I have succedes in complicating an otherwise straightforward question with my late-at-night english

You'll have to be more imaginative with the way you structure the builds so you can in fact do it inside one tree. (Not a put down, just it's hard to give more exact answer because the question has few specifics).
Remember you have +*delay options*+ for each build, so two concurrent build/move actions can actually occur at different times in the presentation. Play with the start build and delay controls and you should be apples.

Having two background brarchive running at the same time with -f 1 options

Good morning,
I need to run two brarchive in parallel as background process.
I would like to have on for the save and one for the copy.
I need that because they would have different files.
1. Is this configuration supported or not?
As a file is created for the locking (.lock.bra) I have the feeling that a single process is supported?
2. Just to double check, can I run two brarchive with two different config file in a serial manner
(lauch the 1st one, wait for its end, launch the 2nd one, waits for its end).
3. If you are using that kind script on your systems, could you please provide them?
4. If brarchive is launched by a script how do you shut it?
Do you do just a kill of the script or do you kill it and send another signal to the brarchive if it is currently running?
Thanks in advance for your answers.

Good afternoon Eric,
> Why do you want to use option -f 1? what are the reasons being this?
-f makes it run in background.
For me, there two advantages for doing that.
1. You start it once, when you start sap, and it runs regularly
2. When you stop sap, you stop braarchive. Then you are sure that no crontab jobs are going to be started when you have stopped SAP.
> you want to stop brarchive with option -f running? try:
>
> brarchive -f stop
This is what is currently done right now.
It works well.
I can use it because we do a single copy of the archive log up to now.
We are going to run two brarchives (one to save to a tape robot with backint and one that scp).
I would like this to run as daemon.
Now, that you have answered that I can not have two brarchives running at the same time (thanks for your answer),
I need to write my own daemon in sh or perl that would do:
1. Run brarchive first run (with -p backint init<SID>.sap file)
2. Wait for the en of the brarchive process and log
3. Run brarchive second run (with -p scp/stage init<SID>.sap file)
4. Wait for the end of the brarchive process and log
5. Sleep during a few minutes
6. Handle stop signal so that it ends the forked brarchive that may be running.
I am sure that people on this forum have already wrote such scripts.
I may open another thread as it divert a little from my original question.
Thanks in advance for your help.

CProjects - Partition for two or more groups on the same system

Hi,
Our business requirement for cProjects implementation is such that we have two groups (two companies infact) under an umbrella brand. We have already impemeneted cProjects for one of them. It's time now to have this implemented for the other group.
How can we ascertain that there's a partition in the system by which one group is completely independent of the other? One group should not see the projects/data of the other group and vice versa. Authorizations to projects helps but in a system, a user can fetch (in project search) the names of all projects in the system (irrespective of whether one has authorization). How can we take care of this?
Summary:
We are looking for the ssytem where one group of cProjects users works in the system as if it were the only group working. We intend to ensure the same for the second group as well.
Please suggest.
Regards...

Hi Zhenbo,
You get points for the "very helpful answer". Thanks.
I have not been able to make a complete breakthrough though. Please see if you can help.
There are three steps under "Structural Authorization"
1. Create Authorization Profile: I see this defined in my system (comes from HR)
2. Save user in SAP Memory (IMG has enough documentation on this.
3. Assign Autorization profile to users: Here, I assigned one of the "Auth. Profiles" to the user (myself). At this, I see that the system (cProjects front end) returns an empty list.
This means that the system expects the Business Partners, pertainig to that "Auth. Profile" (which I set in step 3 above). And because it does not find any, it returns an empty list.
What I am not looking for is:
How to bring in the Business Partners (we are using the HR Master Employees) under this "Auth. Profile" such that the system picks them when we do a resource search at cProjects front end?
So... what I am looking for is: relation between this "Auth. Profile" assigned to the user and the Business Partners corrresponding to this "Auth. Profile".
Please see if you can help.
Regards,
Bittu.

I am still trying to get two funtions to run AT THE SAME TIME within my vi, but to no avail.

I am trying to capture a signal with a daq card (PCI-MIO-16E-4) WHILE I have a picture box switch back and forth between grey levels. It is absolutely necessary that they both happen simultaneously, but what is happening is that the picture box stops switching while the DAQ is capturing the signal. Can someone take a look at this and offer some suggestions, or just see if you can get this thing to work. The vi is simple and should be straight forward, right? I have had some suggestions on a previous fishing expedition, but none worked. If you try this vi, set the scan rate to 5000, and the # of scans to 15,000. P.S. I am running labview 6.1 if that makes any differenc
e. Thanks for your attention.
Attachments:
Acq_N_Scans_to_File_(wdt)_with_flicker_2while.vi ‏135 KB

Hi Planar,
You have been trying hard!
I am not sure the following will help, but I would like you to try it out.
I have restructured your code to help reduce the work that is done while data is acquired.
1) I "pre-compute" the pictures at app start-up. This way only the pictures need updated and the pictures are rendered repeatedly.
2) I moved your config up front so it does not run while the flickering is going on.
3) I add a check of the backlog from the DAQ that looks at the number of scans waiting in the buffer WITHOUT reading the data. Only when the requested # of scan are ready is the data read.
4) While waiting for the buffer to fill, the daq loop will execute a wait, thereby freeing CPU for the flicker tasks.
Your code, w
ith my changes is attached (in LV 7.0).
A jpg is included for non-LV-7.0 readers.
Yes, the code is sloppy! I am woring fast and for free!
No, I do not have DAQ hardware to test so it may NOT work right out of the box.
I hope this helps,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
Flicker.vi ‏152 KB
Flicker.JPG ‏157 KB

Getting two computers to run on the same internet line but to far to use wireless router.

i have my main computer in the house using westell 6100 and linksys wireless, but it will not reach, (distance wise) to the garage, where I have a phone line and want to use my laptop. Can i hook up another router to that phone line?

In order to avoid board clutter, we ask that you post your topic on one board only.
Please look ---> HERE for replies to your topic. Thank you.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

One Listener : two Databases in the same system : is it possible ?

Hi,
I am trying to setup a single listener to listen to two Databases running in the same system. We are experimenting a Network Architecture & this is a part of our experiment to see what happens..( most of the documentation I have read point out that running two DBs on a sing le system isn't a good idea..).
One of the Databases is an Oracle Application Server Infrastructure Metadata Respository ( OraInfra ). The other database has been configured for use with Oracle Content Database ( OraContentDB ) .
The two databases are up & running successfully - however, the problem is with the listener. The two listener.ora files are as follows :-
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\OraContentDB\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oracle\product\10.2.0\OraContentDB)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 152.69.191.100)(PORT = 1522))
)and
# listener.ora Network Configuration File: C:\OraInfra\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\OraInfra)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 152.69.191.100)(PORT = 1521))
        (ADDRESS = (PROTOCOL = TCP)(HOST = 152.69.191.100)(PORT = 1522))
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
)However, everytime I try to connect via SQLPLUS, I can only connect via the first Listener. If I try to connect via the second listener, I only get this error :-
SQL> connect scott/tiger@localhost:1522/CONTENTDB
ERROR:
ORA-12541: TNS:no listenerCan anyone shed some light on this ?
Thanks,
Sandeep

Hi,
Thanks to everyone for your time ! Yes, I now have an understanding of the architecture & I am trying to set up my listener...
Paul, I reconfigured my Listener.ora and started it :-
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\OraInfra)
      (PROGRAM = extproc)
    (SID_DESC =
      (GLOBAL_DBNAME = ORAINFRA.idc.oracle.com)
      (ORACLE_HOME = C:\OraInfra)
      (SID_NAME = ORAINFRA)
    (SID_DESC =
      (GLOBAL_DBNAME = CONTENTDB.idc.oracle.com)
      (ORACLE_HOME = C:\oracle\product\10.2.0\OraContentDB)
      (SID_NAME = CONTENTDB)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 152.69.191.100)(PORT = 1521))
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
)I started the listener from the command line and this si what I see :-
C:\OraInfra\bin>c:\OraInfra\bin\lsnrctl
LSNRCTL for 32-bit Windows: Version 10.1.0.4.2 - Production on 16-AUG-2006 10:12
:38
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> start
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.1.0.4.2 - Production
System parameter file is C:\OraInfra\network\admin\listener.ora
Log messages written to C:\OraInfra\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=152.69.191.100)(PORT=152
1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=152.69.191.100)(PORT=152
1)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 10.1.0.4.2 - Produ
ction
Start Date                16-AUG-2006 10:12:45
Uptime                    0 days 0 hr. 0 min. 2 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\OraInfra\network\admin\listener.ora
Listener Log File         C:\OraInfra\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=152.69.191.100)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
Services Summary...
Service "CONTENTDB.idc.oracle.com" has 1 instance(s).
Instance "CONTENTDB", status UNKNOWN, has 1 handler(s) for this service...
Service "ORAINFRA.idc.oracle.com" has 1 instance(s).
Instance "ORAINFRA", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>It didn't look suspicious to me I had a peek at the Listener.Log :-
TNSLSNR for 32-bit Windows: Version 10.1.0.4.2 - Production on 16-AUG-2006 10:12:43
Copyright (c) 1991, 2004, Oracle. All rights reserved.
System parameter file is C:\OraInfra\network\admin\listener.ora
Log messages written to C:\OraInfra\network\log\listener.log
Trace information written to C:\OraInfra\network\trace\listener.trc
Trace level is currently 0
Started with pid=3308
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=152.69.191.100)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
16-AUG-2006 10:12:45 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=balajsub))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=168821762)) * status * 0
16-AUG-2006 10:12:46 * service_died * 1183The message "service_died" looked fishy & I tried to conect :-
C:\OraInfra\bin>sqlplus /nolog
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Aug 16 10:18:26 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect scott/[email protected]:1521/ORAINFRA.idc.oracle.com
SQL> Connected
SQL> connect scott/[email protected]:1521/CONTENTDB.idc.oracle.com
ERROR:
ORA-12537: TNS:connection closedI now understand that the Listener is trying to open a connection to the Database - but, I am not sure why the connection dies with with the ORA-12537 error. It looks like the error is somewhere deeper in the TNS Layer...
Can you throw some light on this as well ?
Regards,
Sandeep

Can I run Photoshop CS4 and CS5 on the same system?

I read somewhere a zillion years ago (right?) that you coould run CS4 and CS5 on the same system but at the time I wasn't even considering it.
Run on the same system - not ness to run at the same time
Or should I install it on a seperate drive (bootable) and go that route. What has everyone found to work and/or not work?
Thanks in advance for your help
BJ

Yes, you can run CS4 an CS5 on the same computer. They install in different folders and don't get in each other's way. As a matter of fact, you will find many posts in this forum from the experts recommending to keep CS4 (or an earlier version) when installing CS5. This way, there is no danger of losing any older plug-ins you may have that aren't compatible to CS5.
When I installed PS CS5 I had problems with my scanner driver. Instead of spending loads of time fixing that problem, I just use PS CS4 when I want to spend an afternoon scanning things. I'm not recommending that "lazy man's" solution, but it is an example of how CS4 and CS5 can be used on the same system.

View data in client B from client A in the same SID without a valid logon?

Hi Folks
We are planning on upgrading our 4.6C system to ERP 6.0, and are initialy considering having two clients in the same sandbox SID. One would be for the developers to perform code remediation checks (client A), and one would contain a copy of production data for performing testing of functionality over live data (client B).
Would it be possible to view data in client B from client A in the same system without a valid logon to client B or RFC connection to client B from client A? For example via the use on an ABAP program to SQL the database?
I know one can use transactions like SM30/SM31 to view, compare, and adjust data between clients, but this requires an RFC connection and valid logon to the target client.
Regards
Kevin.

Hi Kevin.
>
Kevin McLatchie wrote:
> Would it be possible to view data in client B from client A in the same system without a valid logon to client B or RFC connection to client B from client A? For example via the use on an ABAP program to
Short answer: yes.
If someone has the right to write and execute ABAP reports on the system he is able to access the data of all clients. So I don't think that this setup is advisable. Don't mix development and production data in one system.
Best regards,
Jan

Multiple agentry servers installed in the same system?

Hello Experts,
There are two agentry servers installed in the same system,but in different drives(C and D drive).I have given access to one server remotely,in the sense the applications to the server in one drive are published by other developers who are connecting to the server through network. In the other drive server iam publishing the applications developed locally.But after deployment,when i connect to the server to retrieve definitions,iam getting the latest application published.
Is this situation possible,because when we connect to the server we are using ip address of the system where the server is installed,if both the servers are running in different drives,then which server application will be deployed,Is there any possibility to connect to the server instances(in my system two server instances),so that the application that is deployed to individual servers can be retrieved?
Thanks in advance
Regards,
Sravanthi
Message was edited by: Michael Appleby

Hi Sravanthi,
I do not believe that you can run two Agentry Servers on the same hardware without making other changes (like running them on SMP 2.3). I would suggest that you look into the documentation for SMP 2.3 as your best solution at this time. Hopefully some more savvy Agentry folks will chime in with a more detailed response.
Regards, Mike
SAP Customer Experience Group - CEG
Message was edited by: Michael Appleby

How to sync two different Nano's through the same iTunes?

how do I upload two persons different runs through the same iTunes?
My wife and I have two different Nanos and seperate sensors but we use the same iTunes which is in my name. Now I have made a new Nike account for my wife but how can I sync her run? At the moment it automaticaly syncs with my account?
regards
Morten Timm

if you call the first redirect, the servlet is getting aborted, so you can redirect to the first servlet, working the stuff in it, and then in the second servlet you can redirect to the third servlet

1 SAP Console for 2 clients (on the same system)

Hi,
We are merging two business units on 1 SAP system. In the beginning they will both have their own client on the same system.
Within both BU's SAP Console is being used. Can we use one SAP Console for both clients?
Or are separate SAP Consoles needed?
If it is possible to use 1 SAP Console, please let me know how (what to do).
Thanks in advance for your help.
Cheers,
Thomas.

Instead of read-only access to each other's iTunes directories, I followed instructions posted elsewhere on this forum and have ITunes in both accounts pointing to the same physical file. From my account, I can see all the songs, both the ones loaded from CDs and the ones downloaded from ITunes (using my ITunes account). From her account, she can see the songs I loaded from CD, but not any of the songs I've downloaded.
If I share my ITunes library, then she can open the shared file and see all of the songs, downloaded as well as those from CDs. However, if she selects any of the downloaded songs, she cannot put them into playlists or otherwise copy them to her IPod.
She doesn't have an ITunes account. Her ITunes is set up to use my account and is one of the two authorized "Computers" for my account. I thought that going into ITunes and authorizing my ITunes-account would have solved the problem, but it doesn't.
I'm running the latest ITunes (Macintosh) software, version 7.0 (7.0).

Two processes running at the same time in Lookout

I have installed Lookout 5.0 with 200 I/O Points onto our server computer. The application of motion control is next to the 200 I/O points through OPC PMAC server/client. Now I would like to have a second process in the same server for trouble shooting and testing without stopping the motion control process. However, this second testing process could have also many I/O points through Serial and USB ports. I assume that the total amount of I/O points of both processes will be greater than 200.I prefer to have independent processes for control and testing because access levels. Can I have these two processes running at the same time when needed?

Hi,
From your description you are using a third party OPC server for the motion application. You could have a second Lookout process communicating with the same OPC server with no problems, as long as you do not exceed the number of I/O points your license supports.
Also, the process you are using for testing obviously could not overwrite datamembers (or registers if you will) that would interfere in the overall application, in other words you can test your application as long as you keep the coherency of the test.
So the answer would be, yes it is possible, however you are still limited to the number of I/O's your license supports... You may even consider upgrade the number of I/O's you have in your license.
Best Regards
Andre Oliveira

Risks of two development groups in the same system

Hi,
I need your help.
I'm looking for a document about the risks having two development groups in the same system.
The point is: An external party will come soon and start the implementation of a mini H2R in the same system as we (the internal team) are working for SD, MM, CO,... As the developments are cross-client, I'm asked to write a document explaining the risks in such cases like:
conflicts: working on the same objects
authorisations: each group should be assigned to different packages
planning: the go-live should be at the same time
transports: there can be conflicts on a transport-level
If you have any documentation that can help me, please let me know.
Kind regards, Gilles.

I hope this is not considered a link farm:
Potential conflicts between already released transports:
Program to validate transport sequence
Uwe Schieferstein's blog on "Dangerous Liaisons in User-Exits and How to Avoid Them":
/people/uwe.schieferstein/blog/2008/11/11/dangerous-liaisons-in-user-exits-and-how-to-avoid-them
Just two of many things to observe...
Thomas

Two MI Clients running on the same system

Similar Messages

Maybe you are looking for