Two Pre-order books at same time

I had two pre-order books that were released today. Neither one of them has actually downloaded in my library. They are both sitting in the 'Books' Shelf. They have the bar on the bottom of the book that pops up when you first download something. Usually when a pre-order book comes through they ask for my password right when I open up the app. It hasn't asked me for my password. If I go to my purchases in iBooks it just says downloading but neither of them are downloading. It will not let me hit Edit and then delete them and go back and re-download them. I went and bought another book thinking maybe it would push through the purchases but it hasn't done anything.
any ideas or help?!?

Hi kevans426!
You should try power cycling your device to see if the issue persists, but if it does, you may need to report an issue with this purchase using the steps located in this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Similar Messages

Control two different parameters at the same time

Two motors were connected each other rigidly. One motor controlled torque and the other motor controlled speed. I generated some torque and speed data which represented one cycle of motion from a motor simulation. I like to send these two different data sets (torque and speed) to two different motors at the same time. Torque data sends to one motor and speed data sends to the other motor to see the response of the load profile. In order to do this, I thought about using multithread, but I am not sure it will work for this application. Usually multithreading delay the CPU time so the overall control process might be delayed, right? If you have better idea, please let me know.

If you are using one motion controller to control both motors, you will probably run into problems if you try to use multithreading on the PC. However, you can execute up to 10 programs (threads) at a time, in addition to host communication, using on-board programming. For more information on on-board programming please refer to the following tutorial: Developer Zone Tutorial: On-board Programming in FlexMotion
Best wishes!
Dawna P.
Applications Engineer
National Instruments

I cancelled a pre-ordered book on my iTunes account, but in my iBooks it still says pre-ordered. How do I get it to not be pre-ordered on my iPhone?

I cancelled a pre-ordered book on my iTunes account, but in my iBooks it still says pre-ordered. The iTunes account is the same as the account on my phone. How do I get it to not be pre-ordered on my iPhone?

Thank you that has resolved it for me, how do I give you the Green tick to say you are a legend???

Pre ordered books not showing

I Can't view my pre ordered books in the store is any one else having this problem? Each time I click on my purchases when in the store the page comes up blank. I was supposed to have a book released 2 days ago but it hasn't downloaded, unfortunately I can't remember which book it was so I can't search for it

This can maybe help you:
http://support.apple.com/kb/TS1702
http://www.apple.com/support/ios/ibooks/

HT203433 Itunes tells me my pre-ordered book is ready to download and never does...

So every time I download a new app from my iPhone 4s, a popup comes and tells me my pre-ordered book 'such wicked intent' is ready for download, and then asks if I'd like to download it now. So I always tap 'yes'.
However, no matter if I'm on 4g or my own internet at home, I always get a message that says "cannot connect to iTunes store, and the book never downloads.
What more is that when I search on the iTunese store from my computer, the book isn't in 'recently purchased' or anything, so it seems I can't download the book again with out REpaying for it.
How can this be fixed?

There are a few options... but start here:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Can I buy 2 different orders at the same time?

I am planning to buy a new iMac and some stuff included (hopefully tomorrow!)
I happen to be a college student, so I will get the education discount for the iMac.
My question is, can I buy the iMac with education discount in one order, and then buy another order of things at the same time period and with the same credit card?
Sorry if this is in the wrong category. Couldn't find a good place to ask this question

You aren't addressing Apple store personnel here - these are user to user technical forums. However, having said that, it seems to me that you cannot place two orders at the same time - that is simply not possible: you process one order and when you're finished checking out and getting a confirmation with that, I don't see why you can't place another order, using whatever payment option you choose. But that is not placing two orders at the same time - it is placing one order after another.

Confirmed qty- if Orders placed at same time

Hi
We have an issue with the Confirmed qty in the sales Order while creating the orders through VA01 for stock items.
If 2 users are creating the orders at the same time with same qty 30, both orders are confirmed and DO will be created (Immediate delivery) even though the ATP qty is only 30. If we create the orders one after the other we dont have any issue( only first order is confirmed, and second order will not be confirmed).
*This material is using the following values during ATP.
Avail. check 03 Check.rule A
is it the Standard SAP behavior ? is there any other solution , which will stop confirmation of qty if orders are created in parallel sessions?

Hello DP,
I would agree to Shuktiz's suggestion above.
The setting mentioned by him will ensure that the Material Quantity is locked while one Sales Order is procesed & it would not be available to other Sales Orders..
Hope this helps..
Thanks,
Jignesh Mehta

Two processes running at the same time in Lookout

I have installed Lookout 5.0 with 200 I/O Points onto our server computer. The application of motion control is next to the 200 I/O points through OPC PMAC server/client. Now I would like to have a second process in the same server for trouble shooting and testing without stopping the motion control process. However, this second testing process could have also many I/O points through Serial and USB ports. I assume that the total amount of I/O points of both processes will be greater than 200.I prefer to have independent processes for control and testing because access levels. Can I have these two processes running at the same time when needed?

Hi,
From your description you are using a third party OPC server for the motion application. You could have a second Lookout process communicating with the same OPC server with no problems, as long as you do not exceed the number of I/O points your license supports.
Also, the process you are using for testing obviously could not overwrite datamembers (or registers if you will) that would interfere in the overall application, in other words you can test your application as long as you keep the coherency of the test.
So the answer would be, yes it is possible, however you are still limited to the number of I/O's your license supports... You may even consider upgrade the number of I/O's you have in your license.
Best Regards
Andre Oliveira

How to sync with two computers not at the same time, I'm registerd with one computer

How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
Where do I find my Sync Key ? so I can install manually if it works ?

Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

How to insert into two differents tables at the same time

Hi
I'm newer using JDev, (version 3.1.1.2 cause the OAS seems to support just the JSP 1.0)
and I want to insert into two differents tables at the same time using one view.
How can I do that ?
TIA
Edgar

Oracle 8i supports 'INSTEAD OF' triggers on object views so you could use a process similar to the following:
1. Create an object view that joins your two tables. 'CREATE OR REPLACE VIEW test AS SELECT d.deptno, d.deptname, e.empname FROM DEPT d, EMP E'.
2. Create an INSTEAD OF trigger on the view.
3. Put code in the trigger that looks at the :NEW values being processed and determines which columns should be used to INSERT or UPDATE for each table. Crude pseudo-code might be:
IF :NEW.deptno NOT IN (SELECT deptno FROM DEPT) THEN
INSERT INTO dept VALUES(:NEW.deptno, :NEW.deptname);
INSERT INTO emp VALUES (:NEW.deptno, :NEW.empname);
ELSE
IF :NEW.deptname IS NOT NULL THEN
UPDATE dept SET deptname = :NEW.deptname
WHERE deptno = :NEW.deptno;
END IF;
IF :NEW.empname IS NOT NULL THEN
UPDATE emp SET empname = :NEW.empname
WHERE deptno = :NEW.deptno;
Try something along those lines.
null

HT201236 I want to do something so simple that there are no instructions. I just need to have two windows open at the same time so I can transfer files from one to the other by drag

I want to transfer files from one device (or page ) to another by drag and drop , so i need two windows ope at the same time,
I know this can be done but I have forgotten how

Don't use any full screen options for any app that has them
Mount your device and double click on it to open it. Drag this window to the upper right of your Desktop and resize it to a bit less than half of your Desktop.
Open the next folder and position it on the lower left side and resize it so you can still see the previous window.

Can I open two Safari windows at the same time?

Can I open two Safari windows at the same time and split the windows in two on my screen? Right now, I have to open Safari and Firefox to get the split screen. I know I can press command to get multiple tabs, but that's not what I want. I want to use Safari on two open windows.

HI,
Open a browser window in Safari. Then Command + N
Press command and ~ or ` to toggle between the windows.
Carolyn

Is there any way to have two garagebands open at the same time?

I'm remixing a NIN song, and I need to have two garagebands open at the same time, is this possible? If so, please help!!

it is possible, but you'd be on your own if there's a prob, and you can't copy and paste between them if that's what you're trying to do

How can I log into two differant accounts at the same time in two windows without the second window affecting the first.

I'm trying to log into two facebook accounts at the same time in differant windows. When ever I log into the second account in the second window it changes the login in the first window. When I hit home or any other link the first window account has been logged out and logged into the second window account. I tried installing a second copy of firefox in a differant folder that the first but it seems to use all the files of the first installation. If I can get 2 toatally seperated instalations that don't rely on the same history, cookies, cache, etc I belive that will solve my problem. Please help.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

Nah, that won't work. Facebook has a feature that gets your IP Address, so as soon as you sign into one on the same computer, it changes the other login for safety purposes (say, someone was on a public library PC. They forgot to log out. Someone else logs in, and it automatically logs them out). You'll need 2 computers to do that.

Play two video files at the same time.

I am trying to play two video files at the same time. I create two threads, each of which has its own frame, playing button, and builds its own graph to play the file. Now everything seems works except that when the first file is being played and I hit PLAY
to play the second file, the program plays the second file but the first one is paused; furthermore the control button has no response for the first one. Did I miss anything? Can anyone help me figure out the problem?
Best,
Fayin

You don't need separate threads for 2+ playback pipelines because the filters create worker threads internally and don't block execution on calling thread.
If you decide to keep separate threads, you will have to follow Michel's advice and have message pumps on those threads.
You can also have both files in the same graph, in which case you have perfect sync between them (both start playing together in sync), however you cannot pause/stop/run files separately.
The problem you described is most likely not a DirectShow problem and is rather about generic threading, COM or window messaging.
http://alax.info/blog/tag/directshow

Two Pre-order books at same time

Similar Messages

Maybe you are looking for