Two SCE boxes has died after upgrade to FW 3.6 (but not immediatelly)

I have experienced SCE error with following switching to System Recovery Mode on two SCE 2000 boxes. I upgraded them two days ago but today they switched to Recovery Mode after unexpected platform reload. Difference between these two boxes reload/crash is only 20 seconds.
Log shows:
SCE2000#>show log | include 10-04-29
2010-04-29 19:27:01 | WARN  | CPU #000 | Not enough disk space.
2010-04-29 19:27:01 | WARN  | CPU #000 | SE Control Module: A problem occurred. Please report to Cisco's customer support
2010-04-29 19:27:01 | WARN  | CPU #000 | The SE status changed to Warning
2010-04-29 19:27:01 | WARN  | CPU #000 | Available disk space at '/tffs0' is 44MB which is under 45MB. Some management operations may fail to execute.
2010-04-29 19:29:56 | INFO  | CPU #000 | A SSH session from 10.48.64.244 was established.
2010-04-29 19:29:56 | INFO  | CPU #000 | File system operation : del  /tffs0/iwf.txt
2010-04-29 19:29:57 | INFO  | CPU #000 | Disk space is OK
2010-04-29 19:29:57 | INFO  | CPU #000 | The SE status changed to Operational
2010-04-29 19:30:16 | INFO  | CPU #000 | File system operation : del  /tffs0/system/prevconf/config.tx9
2010-04-29 19:30:16 | INFO  | CPU #000 | File system operation : del  /tffs0/system/prevconf/config.tx8
2010-04-29 19:30:16 | INFO  | CPU #000 | File system operation : del  /tffs0/system/prevconf/config.tx7
2010-04-29 19:30:16 | INFO  | CPU #000 | File system operation : del  /tffs0/system/prevconf/config.tx6
2010-04-29 19:30:16 | INFO  | CPU #000 | File system operation : del  /tffs0/system/prevconf/config.tx5
2010-04-29 19:30:16 | INFO  | CPU #000 | File system operation : del  /tffs0/system/prevconf/config.tx4
2010-04-29 19:30:16 | INFO  | CPU #000 | File system operation : del  /tffs0/system/prevconf/config.tx3
2010-04-29 19:30:16 | INFO  | CPU #000 | File system operation : del  /tffs0/system/prevconf/config.tx2
2010-04-29 19:30:16 | INFO  | CPU #000 | File system operation : del  /tffs0/system/prevconf/config.tx1
2010-04-29 19:30:16 | INFO  | CPU #000 | File system operation : copy /tffs0/system/config.txt /tffs0/system/prevconf/config.tx1
2010-04-29 19:30:16 | INFO  | CPU #000 | Configuration file '/tffs0/system/config.txt' was saved - files size = 4228.
2010-04-29 19:30:18 | INFO  | CPU #000 | File system operation : del  /tffs0/system/prevconf/config.tx9
2010-04-29 19:30:18 | INFO  | CPU #000 | File system operation : del  /tffs0/system/prevconf/config.tx8
2010-04-29 19:30:18 | INFO  | CPU #000 | File system operation : del  /tffs0/system/prevconf/config.tx7
2010-04-29 19:30:18 | INFO  | CPU #000 | File system operation : del  /tffs0/system/prevconf/config.tx6
2010-04-29 19:30:18 | INFO  | CPU #000 | File system operation : del  /tffs0/system/prevconf/config.tx5
2010-04-29 19:30:18 | INFO  | CPU #000 | File system operation : del  /tffs0/system/prevconf/config.tx4
2010-04-29 19:30:18 | INFO  | CPU #000 | File system operation : del  /tffs0/system/prevconf/config.tx3
2010-04-29 19:30:18 | INFO  | CPU #000 | File system operation : del  /tffs0/system/prevconf/config.tx2
2010-04-29 19:30:18 | INFO  | CPU #000 | File system operation : del  /tffs0/system/prevconf/config.tx1
2010-04-29 19:30:18 | INFO  | CPU #000 | File system operation : copy /tffs0/system/config.txt /tffs0/system/prevconf/config.tx1
2010-04-29 19:30:18 | INFO  | CPU #000 | Configuration file '/tffs0/system/p3hidden/config/confX1.txt' was saved - files size = 443.
2010-04-29 19:30:24 | ERROR | CPU #000 | SE Watchdog Module: An Error occurred. Please report to Cisco's customer support
2010-04-29 19:30:24 | ERROR | CPU #000 | SE Watchdog Module: An Error occurred. Please report to Cisco's customer support
2010-04-29 19:30:24 | WARN  | CPU #000 | SE Watchdog Module: A problem occurred. Please report to Cisco's customer support
2010-04-29 19:30:24 | INFO  | CPU #000 | Party data base was closed.
******************** User Log File - started at 2010-04-29 17:33:35  - Version 3.6.0 Build 716 ********************
2010-04-29 17:33:35 | INFO  | CPU #000 | SCE Application main process starting init phase.
2010-04-29 17:33:35 | INFO  | CPU #000 | Set connection-mode: connection mode is: inline, box priority is: primary, fail-over mode is: bypass, physically-connected link group is: 0.
2010-04-29 17:33:35 | INFO  | CPU #000 | Flow data-base (FC) initialized
2010-04-29 17:33:35 | INFO  | CPU #000 | RuC specific initialization completed
2010-04-29 17:33:35 | INFO  | CPU #000 | General RuC initialization completed
2010-04-29 17:33:35 | INFO  | CPU #000 | System clock set to 17:33:35  UTC  THU  April  29  2010.
2010-04-29 17:33:35 | INFO  | CPU #000 | Logger task Initialized successfully
2010-04-29 17:33:36 | INFO  | CPU #001 | SCE Application main process starting init phase.
2010-04-29 17:33:36 | INFO  | CPU #001 | Flow data-base (FC) initialized
2010-04-29 17:33:36 | INFO  | CPU #001 | RuC specific initialization completed
2010-04-29 17:33:36 | INFO  | CPU #001 | General RuC initialization completed
2010-04-29 17:33:36 | INFO  | CPU #002 | SCE Application main process starting init phase.
2010-04-29 17:33:36 | INFO  | CPU #002 | Flow data-base (FC) initialized
2010-04-29 17:33:36 | INFO  | CPU #002 | RuC specific initialization completed
2010-04-29 17:33:36 | INFO  | CPU #002 | General RuC initialization completed
2010-04-29 17:33:36 | INFO  | CPU #003 | SCE Application main process starting init phase.
2010-04-29 17:33:36 | INFO  | CPU #003 | Flow data-base (FC) initialized
2010-04-29 17:33:36 | INFO  | CPU #003 | RuC specific initialization completed
2010-04-29 17:33:36 | INFO  | CPU #003 | General RuC initialization completed
2010-04-29 17:33:41 | INFO  | CPU #000 | System clock set to 17:33:41  UTC  THU  April  29  2010.
2010-04-29 17:33:41 | INFO  | CPU #000 | Subscriber data-base manager initialized successfully.
2010-04-29 18:33:44 | INFO  | CPU #000 | Time zone set to CET 60 minutes.
2010-04-29 18:34:02 | INFO  | CPU #000 | state changed from INIT to RECOVERY.
2010-04-29 18:34:22 | INFO  | CPU #000 | SM: DHCP LEASE QUERY LEG 3.6.0 Build 429 started
2010-04-29 18:34:31 | INFO  | CPU #000 | EM Agent: EM Agent started. Version: SCE Agent 3.6.0 Build 429
2010-04-29 18:34:31 | INFO  | CPU #000 | Management agent is up.
2010-04-29 18:34:31 | INFO  | CPU #000 | EM Agent: SM operational state switched from Initialization to Active.
2010-04-29 18:34:31 | INFO  | CPU #000 | Beginning execution of configuration files.
2010-04-29 18:34:32 | INFO  | CPU #000 | System hostname changed to 'sce-2'.
2010-04-29 18:34:32 | INFO  | CPU #000 | A new password was set for level 0.
2010-04-29 18:34:32 | INFO  | CPU #000 | A new password was set for level 10.
2010-04-29 18:34:32 | INFO  | CPU #000 | A new password was set for level 15.
2010-04-29 19:34:33 | INFO  | CPU #000 | Time zone set to CET 60 minutes.
2010-04-29 19:34:33 | INFO  | CPU #000 | SM: RDR Server has been started.
2010-04-29 19:34:33 | INFO  | CPU #000 | EM Agent: PRPC server started on port 14374.
2010-04-29 19:34:33 | INFO  | CPU #000 | Set connection-mode: connection mode is: inline-cascade, box priority is: secondary, fail-over mode is: bypass, physically-connected link group is: 1.
2010-04-29 19:34:33 | INFO  | CPU #000 | state changed from INIT to BOOT.
2010-04-29 19:34:33 | INFO  | CPU #000 | Formatter connection opened: address 127.0.0.1, port 33001.
2010-04-29 19:34:33 | INFO  | CPU #000 | SM: Connection from 127.0.0.1:1025 opened.
2010-04-29 19:34:34 | INFO  | CPU #000 | Formatter active connection opened : address 127.0.0.1, port 33001, category 3.
2010-04-29 19:34:36 | INFO  | CPU #000 | Starting Line Card on slot 0 state change to shutdown
2010-04-29 19:34:36 | INFO  | CPU #000 | Linecard on slot 0 is disabled
2010-04-29 19:34:39 | INFO  | CPU #000 | Formatter connection opened: address 10.48.64.78, port 33000.
2010-04-29 19:34:39 | INFO  | CPU #000 | Formatter active connection opened : address 10.48.64.78, port 33000, category 0.
2010-04-29 19:34:39 | INFO  | CPU #000 | Formatter active connection opened : address 10.48.64.78, port 33000, category 1.
2010-04-29 19:34:39 | INFO  | CPU #000 | Formatter active connection opened : address 10.48.64.78, port 33000, category 2.
2010-04-29 19:34:39 | INFO  | CPU #000 | Starting Line Card on slot 0 state change to no shutdown
2010-04-29 19:34:39 | INFO  | CPU #000 | Linecard on slot 0 is enabled
2010-04-29 19:34:40 | ERROR | CPU #000 | Application configuration file executed with 390 errors.
2010-04-29 19:34:41 | INFO  | CPU #000 | SSH server started.
2010-04-29 19:34:41 | WARN  | CPU #000 | Link on management port #1 is down.
2010-04-29 19:34:41 | INFO  | CPU #000 | The SE status changed to Operational
2010-04-29 19:34:45 | INFO  | CPU #000 | EM Agent: PRPC connection to /10.48.64.113 established, client name is mcn.QuotaManager-10.48.64.74_10.48.64.113_SCE.J.API.PRPC, session name is rpc-0.
2010-04-29 19:34:45 | INFO  | CPU #000 | EM Agent: QuotaManager-10.48.64.74_10.48.64.113_SCE.J.API.PRPC - connect operation was called, registered listeners: quota
2010-04-29 19:34:51 | INFO  | CPU #000 | EM Agent: PRPC connection to /10.48.64.113 established, client name is usr.SM, session name is rpc-1.
2010-04-29 19:34:51 | INFO  | CPU #000 | EM Agent: PRPC connection to /10.48.64.113 established, client name is mcn.SM, session name is rpc-2.
2010-04-29 19:34:52 | INFO  | CPU #000 | Redundancy: SM connection status changed from NA to UP.
2010-04-29 19:34:52 | INFO  | CPU #000 | Subscriber Manager connection is up.
2010-04-29 19:34:52 | INFO  | CPU #000 | EM Agent: SM connection established.
2010-04-29 19:34:52 | INFO  | CPU #000 | EM Agent: VPN synchronization started.
2010-04-29 19:34:52 | INFO  | CPU #000 | EM Agent: VPN synchronization finished successfully.
2010-04-29 19:35:32 | INFO  | CPU #000 | state changed from BOOT to RECOVERY.
2010-04-29 19:35:33 | INFO  | CPU #000 | state changed from RECOVERY to STANDALONE.
2010-04-29 19:35:33 | INFO  | CPU #000 | EM Agent: VPN synchronization started.
2010-04-29 19:35:33 | INFO  | CPU #000 | EM Agent: VPN synchronization finished successfully.
2010-04-29 19:35:33 | INFO  | CPU #000 | EM Agent: Subscriber synchronization started.
2010-04-29 19:35:33 | INFO  | CPU #000 | EM Agent: Subscriber synchronization finished successfully.
2010-04-29 19:36:58 | WARN  | CPU #000 | Not enough disk space.
2010-04-29 19:36:58 | WARN  | CPU #000 | SE Control Module: A problem occurred. Please report to Cisco's customer support
2010-04-29 19:36:58 | WARN  | CPU #000 | The SE status changed to Warning
2010-04-29 19:36:58 | WARN  | CPU #000 | Available disk space at '/tffs0' is 44MB which is under 45MB. Some management operations may fail to execute.
2010-04-29 19:45:07 | INFO  | CPU #000 | Formatter connection closed: address 10.48.64.78, port 33000.
2010-04-29 19:45:07 | INFO  | CPU #000 | No Formatter connections is open on category 0.
2010-04-29 19:45:07 | INFO  | CPU #000 | No Formatter connections is open on category 1.
2010-04-29 19:45:07 | INFO  | CPU #000 | No Formatter connections is open on category 2.
2010-04-29 19:45:07 | INFO  | CPU #000 | Formatter connection opened: address 10.48.64.78, port 33000.
2010-04-29 19:45:08 | INFO  | CPU #000 | Formatter active connection opened : address 10.48.64.78, port 33000, category 0.
2010-04-29 19:45:08 | INFO  | CPU #000 | Formatter active connection opened : address 10.48.64.78, port 33000, category 1.
2010-04-29 19:45:08 | INFO  | CPU #000 | Formatter active connection opened : address 10.48.64.78, port 33000, category 2.
2010-04-29 19:55:07 | INFO  | CPU #000 | Formatter connection closed: address 10.48.64.78, port 33000.
2010-04-29 19:55:07 | INFO  | CPU #000 | No Formatter connections is open on category 0.
2010-04-29 19:55:07 | INFO  | CPU #000 | No Formatter connections is open on category 1.
2010-04-29 19:55:07 | INFO  | CPU #000 | No Formatter connections is open on category 2.
2010-04-29 19:55:07 | INFO  | CPU #000 | Formatter connection opened: address 10.48.64.78, port 33000.
2010-04-29 19:55:09 | INFO  | CPU #000 | Formatter active connection opened : address 10.48.64.78, port 33000, category 0.
2010-04-29 19:55:09 | INFO  | CPU #000 | Formatter active connection opened : address 10.48.64.78, port 33000, category 1.
2010-04-29 19:55:09 | INFO  | CPU #000 | Formatter active connection opened : address 10.48.64.78, port 33000, category 2.
2010-04-29 20:04:38 | INFO  | CPU #000 | A SSH session from 10.96.108.90 was established.
2010-04-29 20:05:37 | INFO  | CPU #000 | Formatter connection closed: address 10.48.64.78, port 33000.
2010-04-29 20:05:37 | INFO  | CPU #000 | No Formatter connections is open on category 0.
2010-04-29 20:05:37 | INFO  | CPU #000 | No Formatter connections is open on category 1.
2010-04-29 20:05:37 | INFO  | CPU #000 | No Formatter connections is open on category 2.
2010-04-29 20:05:37 | INFO  | CPU #000 | Formatter connection opened: address 10.48.64.78, port 33000.
2010-04-29 20:05:38 | INFO  | CPU #000 | Formatter active connection opened : address 10.48.64.78, port 33000, category 0.
2010-04-29 20:05:38 | INFO  | CPU #000 | Formatter active connection opened : address 10.48.64.78, port 33000, category 1.
2010-04-29 20:05:38 | INFO  | CPU #000 | Formatter active connection opened : address 10.48.64.78, port 33000, category 2.
2010-04-29 20:08:53 | ERROR | CPU #000 | SE Watchdog Module: An Error occurred. Please report to Cisco's customer support
2010-04-29 20:08:53 | ERROR | CPU #000 | SE Watchdog Module: An Error occurred. Please report to Cisco's customer support
2010-04-29 20:08:53 | WARN  | CPU #000 | SE Watchdog Module: A problem occurred. Please report to Cisco's customer support
2010-04-29 20:08:53 | INFO  | CPU #000 | Party data base was closed.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Similar Messages

  • You View Box has died after 5 days? which number s...

    Hello,
    Box has totally died no lights on the front no response at all. Which no can I call to get  a replacement sent out?
    It was working fine turned it off for about 10mins and went back and it was dead!

    If you got it direct from BT then I'd give their support line a ring on 0800 111 4567
    If you bought it from a retail store then it will be covered under their returns process.
    Before that it's worth checking the fuse in the plug and that the switch on the back of the box is still on. It's often the simple things that catch us out!

  • HT204266 Why is it that after upgrading to IOS 6, I could not retreive my full list of my purchased applications & ganes list in the app store now !!!!

    Why is it that after upgrading to IOS 6, I could not retreive my full list of my purchased applications & ganes list in the app store now !!!!
    Whenever I try to tab my purchased in the update feature of app store; not only does the long list of my previous purchases do not showed up like in IOS 5 do but after a while it just prompt out to the main home page. I tried this for both my 3GS and 4GS too and both have the same problem. APPLE INC please rectify this serious problem as soon as possible.

    Did you read your other posted question, that has been answered.

  • After upgrade to ios7.0 , I can not open my phone

    iphone 4s  ------after upgrade to ios 7.0 , can not open my iphone , because it need me to enter the open iphone passcode , but I did not set up open passcode before?  strange ?? now can not use my iphone , urgent ! how to solve it .  how to open iphone ? (once set up passcode when use ios6.0 but cancel it long time ago.  I bought it in USA. and before upgrade , it works well ) . pls kindly help !!

    Hi unlac,
    Thanks for using Apple Support Communities.  This article has steps to use when you are unable to unlock your iPhone:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Cheers,
    - Ari

  • After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

    After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

  • After upgrading to Lion internal mic does not work with Facetime

    After upgrading to Lion internal mic does not work with Facetime.  The mic is picking up sound as noted in System Prefs.  This was working just fine before the updgrade.  Facetime works OK on my iPod. 

    you have in french a tutorial to recreate your partition here
    Rebuild partition with Recovery HD lion after upgrade to 10.7.2
    i tested, it's work !
    For your wifi problem:
    Try to change your setup of wifi, look this table given by apple:
    I changed my wifi setup wep to wpa and it's work !

  • After upgrading to Lion Image Capture does not work, even though it is intel software.  Gives error 9931.  What gives?

    After upgrading to Lion, Image Capture does not work, even though it is intel software.  Gives error 9931.  What gives?

    Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
    Didn't used to be this way before Lion/10.7.
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • HT1414 how can i activate my iphone 3gs after upgrading to ios6? it could not activate....

    how can i activate my iphone 3gs after upgrading to ios6? it could not activate....

    If your phone was previously hacked to unlock it, when you updated the hack was removed and it's re-locked to the original carrier.  The phone will now activate and operate only with that original carrier.

  • After upgrading to Mavericks my iMac does not see Sony camcorder in iMovie anymore. It still works on MacBook, so nothing wrong with camera or connections.

    After upgrading to Mavericks my iMac does not see my Sony camcorder anymore. I tried the new iMovie as well as the old version 9.0.9, which is still in Applications. I checked the camcorder and connections in iMovie on my MacBook (not upgraded) and that still functions properly, so the problem does not seem to be in iMovie, old or new, or in camcorder and connection.
    Anybody with the same problem or a solution?
    Thanks mbkom

    Try this

  • TS1398 After upgrade to iOS 6 i am not able to use wifi.

    Connected, but no wifi traffic (at home).
    After upgrade to iOS 6 i am not able to use wifi. I am connected to my home wifi but no trafic is coming through (safari, skype, twitter, app store). I have even tried recovery of my iPhone 4S using iTunes as well as using iPhone. But without effect.
    Can not connect at all (at work).
    Thank you for helpfull advice.
    Vladimir
    Please do not give me advice like:
    switch proxy to auto
    turn the flight mode on and off
    turn the iphone on and off
    release the ip
    recovery the network settings
    recovery firmware
    I have tried all these, but did not work.
    PS to apple:
    I really did not expect this kind of trouble. If I would want to waste my time "repairing my device", I would buy an android phone!!!!!!

    This helped me solve the problem:
    I have changed the security from TKIP to AES and now my wifi works fine /sofar/.
    Targat

  • After upgrading to ios6 my iphone will not open .xls files in emails with the default viewer. Is there a fix for this? The same emailed .xls files still open on my ipad using ios5 while viewing email like they did on my iphone prior to upgrading.

    After upgrading to ios6 my iphone will not open .xls files in emails with the default viewer. Is there a fix for this? The same emailed .xls files still open on my ipad using ios5 while viewing email like they did on my iphone prior to upgrading. I have no special software like numbers or anything else installed on either device. Just using the default viewer provided by apple for viewing email.

    The attachment is an .xls excel 97-2003 spreadsheet. I viewed the file in the email and did not edit it with any software. I can forward the file to anyone that is may want to check it out to see if they can help me. I was wondering if there was some way of forcing another ios6 install on my phone and maybe that would solve it.
    Is there anyone out there that is viewing .xls files in email using ios6 w/o any other software installed like numbers or any other add ons? I am not upgrading my ipad from ios5 to ios6 so I can still continue to view the emails on my ipad. Is there an email viewer .xls plug-in that will be availablle in the next ios6 update?

  • TS2998 After upgrading to Snow Leopard, Mail will not let me archive any mail. All archived messages re-appear in my inbox (I have tried archiving and placing in the trash bin).

    After upgrading to Snow Leopard, Mail will not let me archive any mail. All archived messages re-appear in my inbox (I have tried archiving and placing in the trash bin). How do i regain control of my inbox?

    The main differences that can cause a problem are scripting additions (64-bit vs 32-bit and security reasons) and the usage of dates (it is not as forgiving). AppleScript itself is basically the same, so if empty paragraphs are what caused your problems the update would have just been a coincidence.

  • After upgrading to Snow Leopard, I can not log into the computer. What Can I do?

    after upgrading to Snow Leopard, I can not log into the computer. What Can I do?

    SqueezeAce wrote:
    after upgrading to Snow Leopard, I can not log into the computer. What Can I do?
    Stick the 10.6 disk into the machine and reboot holding the option/alt key down on a wired/built in keyboard.
    On the second screen, under the Utilities menu is a Password Reset, use it.
    Step by Step to fix your Mac
    What this will do is reset the password and the user account permissions in the process.
    You might have problems with Keychain afterwards, to fix that.
    https://support.apple.com/kb/HT1631  https://support.apple.com/kb/TS1544
    If your still having trouble, look through these User Tips
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

  • I have an iphone and after upgrading it`s system i can not open videos now.Please help me

    I have an iphone and after upgrading it`s system i can not open videos now.Please help me

    Trash the prefs in the preferences folder.
    Important Directories
    Mylenium

  • My Airplay is delivering Audio but no Video (black screen).  The drop down box has a new selection "use airplay to; it does not let me select 'Mirror my IMac', it is stuck on 'extend desktop'  any suggestions appreciated.

    My Airplay is delivering Audio but no Video (black screen).  The drop down box has a new selection "use airplay to; it does not let me select 'Mirror my IMac', it is stuck on 'extend desktop'  any suggestions appreciated.

    here is fix! i tried only step 1 and then restarted my computer and now it works. Choose remove All Files 
    Hope it helps.
    https://discussions.apple.com/thread/5952624?tstart=0

Maybe you are looking for