Two spools into one

Hello Experts,
I have developed one report,it has two variants , for which two spools generated and 2 mail float automatically for two spools after that.
My requirement :Is two spools can be combined in one file ,so that only one mail float.
Aastha

Hello,
You can read the spool numbers as logic given below:
CALL FUNCTION 'BP_JOB_READ'
        EXPORTING
          job_read_jobcount     = g_jcount
          job_read_jobname      = g_jbname
          job_read_opcode       = l_opcode
        TABLES
          job_read_steplist     = l_t_steps
        EXCEPTIONS
          invalid_opcode        = 1
          job_doesnt_exist      = 2
          job_doesnt_have_steps = 3
          OTHERS                = 4.
      IF sy-subrc = 0.
        CLEAR g_t_spool.
        LOOP AT l_t_steps ASSIGNING <fs_steps> WHERE NOT ( listident IS INITIAL ).
          g_wa_spool-listident  = <fs_steps>-listident.
          APPEND g_wa_spool TO g_t_spool.
        ENDLOOP.
      ENDIF.
After reading, just to display the spools use the following logic:
    LOOP AT g_t_spool INTO g_wa_spool.
      g_spool1 = g_wa_spool-listident.
      CALL FUNCTION 'COM_SE_SPOOL_DISPLAY'
        EXPORTING
          iv_spool_no = g_spool1.
    ENDLOOP.
But since you dont want to display, but mail to the user, you will have to build logic around the spool file, taking it into some internal table.
Regards,
Mansi.

Similar Messages

  • HT1473 My girlfriend and I both have iTunes account with our own music libraries and we want to combine our two libraries into one icloude accounts so can both then access our one shared libary at anytime in the cloud.  How do we do this?

    My girlfriend and I both have iTunes account with our own music libraries and we want to combine our two libraries into one icloude accounts so can both then access our one shared libary at anytime in the cloud.  How do we do this?

    No it is not possible.  Content purchased from the iTunes Store is permanently tied to the account from which it was originally purchased, and Apple does not provide a way to change it.

  • HT1449 how do you move all music from two computers into one itunes account?

    How do you move all music from two computers into one itunes account?

    An "iTunes account" is an online account you use for buying music, like a bank account.  An iTunes collection is the media you see when you open iTunes. Which do you mean?
    If it is two computers, it would also help to know where these are located. Are they on the same local network? If they are, try Home Sharing (and you have control of both and you aren't just trying to get music fro your computer to your friend's computer in another state).  If they are not, you'll have to use an external hard drive or flash drive.
    Is this on a PC? Your computer information says Windows but you posted this in the iTunes for Mac forum.

  • I opened an itunes account then forgot my password. I opened a new account now I would like to combine my two accounts into one but I still can't remember my password and now I have a new email account. Help!

    I opened an itunes account then forgot my password. I opened a new account now I would like to combine my two accounts into one but I still can't remember my password and now I have a new email account. Help!

    You can't combine accounts but help here Apple ID FAQ's for resetting your Apple ID password.

  • How do I combine two regents into one in Logic Pro Arrange?

    how do I combine two regents into one in Logic Pro Arrange?

    Thanks for your input kcstudio. I would still be left with 2 regions although one after the other, on one track.
    I am trying to save steps of the way I am combining the info of 2 seperate regions into one: bouncing the 2 tracks then re-importing that audio back into the project. It would save a lot of time if you could just drag one region on top of the other
                                W.W.

  • List aggregate two rows into one

    query :
    select kod_negeri.NAMA kod_negeri_nama,
    hakmilik.id_hakmilik,
    MOHON.PENYERAH_NAMA,
    MOHON.PENYERAH_ALAMAT1, MOHON.PENYERAH_ALAMAT2, MOHON.PENYERAH_ALAMAT3,
    MOHON.PENYERAH_ALAMAT4, MOHON.PENYERAH_POSKOD, MOHON.PENYERAH_KOD_NEGERI,
    MOHON.PENYERAH_NO_RUJ, MOHON.ID_MOHON, HAKMILIK.KOD_HAKMILIK, HAKMILIK.NO_HAKMILIK,
    KOD_LOT.NAMA, HAKMILIK.NO_LOT, KOD_BPM.NAMA, KOD_DAERAH.NAMA,
      LELONG.TMPT, LELONG.DIMASUK, PGUNA.NAMA,
      PIHAK.ALAMAT1, pihak.NAMA ven,
    PIHAK.ALAMAT2, PIHAK.ALAMAT3, PIHAK.ALAMAT4, PIHAK.POSKOD,
    mohon.id_mohon ,
    pguna.NAMA pguna_nama,
    pguna.JAWATAN,
    kod_daerah.NAMA kod_daerah_nama,
    to_char(enkuiri.TRH_enkuiri,'DD')||' '|| to_char(enkuiri.TRH_enkuiri,'MONTH','nls_date_language=malay') ||' '||TO_CHAR (enkuiri.TRH_enkuiri, 'YYYY') trh_enkuiri,
    to_char(lelong.TRH_lelong,'DD')||' '|| to_char(lelong.trh_lelong,'MONTH','nls_date_language=malay') ||' '||TO_CHAR (lelong.TRH_lelong, 'YYYY') trh_le,
    to_char(lelong.trh_lelong, 'Day') day,
    to_char(lelong.TRH_lelong,'HH12:MI ')  hour,
    DECODE(SUBSTR(to_char(lelong.TRH_lelong,'HH12:MI AM'),-2,2),'AM','Petang','pagi')  noon,
    enkuiri.cara_lelong,
    lelong.TMPT,
    lelong.HARGA_RIZAB,
    enkuiri.harga_rizab,
    initcap(pihak.NAMA) pihak_nama,
    initcap(lelong.EJA_RIZAB) er,
    'RM'||enkuiri.TUNGGAK_AMAUN,
    lelong.DEPOSIT,
    convert_number_words(lelong.DEPOSIT) as converted_form,
    to_char(lelong.TRH_AKHIR_BYR,'DD')||' '|| to_char(lelong.TRH_AKHIR_BYR,'MONTH','nls_date_language=malay') ||' '||TO_CHAR (lelong.TRH_AKHIR_BYR, 'YYYY') TRH_AKHIR_BYR,
    to_char(sysdate,'DD') ||' '|| to_char(sysdate,'MONTH','nls_date_language=malay') ||' '||to_char(sysdate,'yyyy') sysd,
    kod_bpm.NAMA kod_bpm_nama,
    kod_lot.NAMA kod_lot_nama,
    hakmilik.NO_LOT,
    hakmilik.KOD_HAKMILIK,
    hakmilik.NO_HAKMILIK
    from
    mohon ,
    mohon_hakmilik ,
    lelong ,
    pguna ,
    pihak ,
    kod_daerah ,
    enkuiri ,
    kod_bpm ,
    hakmilik ,
    kod_lot ,
    kod_negeri,
    mohon_fasa ,
    kod_hakmilik
    WHERE mohon.id_mohon = mohon_hakmilik.id_mohon and
    mohon_hakmilik.id_hakmilik = hakmilik.id_hakmilik and
    hakmilik.kod_hakmilik = kod_hakmilik.kod(+) and
    hakmilik.kod_lot  = kod_lot.kod(+) and
    hakmilik.kod_bpm = kod_bpm.kod(+) and
    hakmilik.kod_daerah = kod_daerah.kod(+) and
    mohon.id_mohon = enkuiri.id_mohon and 
    lelong.id_pihak = pihak.id_pihak and
    lelong.id_mh = mohon_hakmilik.id_mh and
    pihak.kod_negeri = kod_negeri.kod(+) and
    mohon.id_mohon = mohon_fasa.id_mohon and
    mohon_fasa.id_aliran ='semakan' and
    mohon_fasa.id_pguna = pguna.id_pguna and
    mohon.id_mohon = :p_id_mohon
    and enkuiri.KOD_STS='AK'
    and mohon.id_mohon ='0405AUC2010007436'KOD_NEGERI_NAMA,ID_HAKMILIK,PENYERAH_NAMA,PENYERAH_ALAMAT1,PENYERAH_ALAMAT2,PENYERAH_ALAMAT3,PENYERAH_ALAMAT4,PENYERAH_POSKOD,PENYERAH_KOD_NEGERI,PENYERAH_NO_RUJ,ID_MOHON,KOD_HAKMILIK,NO_HAKMILIK,NAMA,NO_LOT,NAMA_1,NAMA_2,TMPT,DIMASUK,NAMA_3,ALAMAT1,VEN,ALAMAT2,ALAMAT3,ALAMAT4,POSKOD,ID_MOHON_1,PGUNA_NAMA,JAWATAN,KOD_DAERAH_NAMA,TRH_ENKUIRI,TRH_LE,DAY,HOUR,NOON,CARA_LELONG,TMPT_1,HARGA_RIZAB,HARGA_RIZAB_1,PIHAK_NAMA,ER,'RM'||ENKUIRI.TUNGGAK_AMAUN,DEPOSIT,CONVERTED_FORM,TRH_AKHIR_BYR,SYSD,KOD_BPM_NAMA,KOD_LOT_NAMA,NO_LOT_1,KOD_HAKMILIK_1,NO_HAKMILIK_1
    Johor,050503PM00000151,HAMZAH DAUD DAROS & SITI NOR,NO 12 1ST FLOOR & 2ND FLOOR,JLN SRI RAHANG,TMN SRI RAHANG,SEREMBAN,58000,05,12345,0405AUC2010007436,PM,151,Lot,6309,Mukim Lenggeng,Seremban,PTG MELAKA,pptlelong1,Puan Nur Faizati,ASDFSAF,AHMAD,DSFDS,FDSFSDF,DSFSDF,12345,0405AUC2010007436,Puan Nur Faizati,Penolong Pegawai Tanah Lelong (PTD),Seremban,08 DISEMBER 2010,27 JANUARI 2011,Thursday ,02:00 ,pagi,A,PTG MELAKA,,,Ahmad,,RM234,,,24 MEI 2011,10 FEBRUARI 2011,Mukim Lenggeng,Lot,6309,PM,151
    ,050540HSD00022923,HAMZAH DAUD DAROS & SITI NOR,NO 12 1ST FLOOR & 2ND FLOOR,JLN SRI RAHANG,TMN SRI RAHANG,SEREMBAN,58000,05,12345,0405AUC2010007436,HSD,22923,Lot,0009838,Mukim Jimah,Seremban,PTG MELAKA,pptlelong1,Puan Nur Faizati,no2,Ali Bin Abudillah,jalan 3,taman permata,lorong mentari,32333,0405AUC2010007436,Puan Nur Faizati,Penolong Pegawai Tanah Lelong (PTD),Seremban,08 DISEMBER 2010,27 JANUARI 2011,Thursday ,02:00 ,pagi,A,PTG MELAKA,,,Ali Bin Abudillah,,RM234,,,24 MEI 2011,10 FEBRUARI 2011,Mukim Jimah,Lot,0009838,HSD,22923
    KOD_NEGERI_NAMA,ID_HAKMILIK,PENYERAH_NAMA,PENYERAH_ALAMAT1,PENYERAH_ALAMAT2,PENYERAH_ALAMAT3,PENYERAH_ALAMAT4,PENYERAH_POSKOD,PENYERAH_KOD_NEGERI,PENYERAH_NO_RUJ,ID_MOHON,KOD_HAKMILIK,NO_HAKMILIK,NAMA,NO_LOT,NAMA_1,NAMA_2,TMPT,DIMASUK,NAMA_3,ALAMAT1,VEN,ALAMAT2,ALAMAT3,ALAMAT4,POSKOD,ID_MOHON_1,PGUNA_NAMA,JAWATAN,KOD_DAERAH_NAMA,TRH_ENKUIRI,TRH_LE,DAY,HOUR,NOON,CARA_LELONG,TMPT_1,HARGA_RIZAB,HARGA_RIZAB_1,PIHAK_NAMA,ER,'RM'||ENKUIRI.TUNGGAK_AMAUN,DEPOSIT,CONVERTED_FORM,TRH_AKHIR_BYR,SYSD,KOD_BPM_NAMA,KOD_LOT_NAMA,NO_LOT_1,KOD_HAKMILIK_1,NO_HAKMILIK_1
    Johor,050503PM00000151,HAMZAH DAUD DAROS & SITI NOR,NO 12 1ST FLOOR & 2ND FLOOR,JLN SRI RAHANG,TMN SRI RAHANG,SEREMBAN,58000,05,12345,0405AUC2010007436,PM and HSD,151 and 22923,Lot,6309,Mukim Lenggeng,Seremban,PTG MELAKA,pptlelong1,Puan Nur Faizati,ASDFSAF,AHMAD,DSFDS,FDSFSDF,DSFSDF,12345,0405AUC2010007436,Puan Nur Faizati,Penolong Pegawai Tanah Lelong (PTD),Seremban,08 DISEMBER 2010,27 JANUARI 2011,Thursday ,02:00 ,pagi,A,PTG MELAKA,,,Ahmad,,RM234,,,24 MEI 2011,10 FEBRUARI 2011,Mukim Lenggeng,Lot,6309,PM,151
    that means i need to list aggregate the two rows into one how to make the changes for the above query in order to do so .
    Edited by: user9093689 on Feb 9, 2011 10:03 PM

    user9093689 wrote:
    now need to bother abt this that line converts date into malay language
    to_char(enkuiri.TRH_enkuiri,'DD')||' '|| to_char(enkuiri.TRH_enkuiri,'MONTH','nls_date_language=malay') ||' '||TO_CHAR (enkuiri.TRH_enkuiri, 'YYYY') trh_enkuiri,iam retriving two rows of output, wat i need is to display one row and the second row values which are not similar should be added to the first row
    for example for column
    kod_hakmilik two rows values are
    PM
    HSD
    but they should be display as
    PM and HSD
    finally my aim is to retrieve only one row as output.
    i dont how exactly the term listaggr . how ever it may be whether using groupby or any other but the output should be as aboveWhat version of Oracle are you on?
    Look up the LISTAGG() function in the documentation for your version (assuming it is there) and see if it can do what you want

  • Combining two messages into one

    Hello,
    I have a mapping issue, I have a business process in which I have to combine two messages into one.
    To do so, I have defined a message mapping in which there are two source message types, and one target message type.
    When testing the message mapping in the IR, it works fine, but when I define and test an interface mapping with that same message mapping, I receive this error message:
    "Cannot produce target element /ns0:Messages/ns0Message1/MY_IDOC_TYPE/MY_SEGMENT. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd."
    What am I doing wrong ?
    How am I supposed to combine two messages into one ?
    Thanks,
    Elad.

    Hi Elad,
    Just see if you have included both you source message interfaces and one target nessage interface correctly in while doing your interface mapping.....
    The most common mistake made when we do scenarios which include combination of two source message types into one target type are:
    - we forget to include both the source message interfaces.
    - or we interchange between one of the source message interface with the target.
    Just see if either of the 2 is aplicable in your case and just activate all components as and when you create them..
    Regards,
    abhy

  • Is it possible to paste two images into one layer?

    I'm having some issues pasting two images into one layer. Every time I paste the second image, it automatically creates a new layer...is there anyway to prevent that from happening? I'm making an animation on photoshop and I want there to be more than image in some of the frames. Please let me know if you have any suggestions! Thanks!

    You can merge the two layers together once they're position. Select the top layer and choose merge down or select both and choose merge layers (from the layers menu).
    http://help.adobe.com/en_US/Photoshop/11.0/WSfd1234e1c4b69f30ea53e41001031ab64-78b2a.html

  • Collapsing two tables into one table or one queue

    When you have data that exists in 2 tables A and B and B is essentially a child of A if you want to process these records such that you see all A's before their assoociated B how can you use either Streams or AQ to collapse these two tables into one? The data exists at it's source in database tables it will be replicated to another location and at that location I want to keep the data as it exists at the source but also process it in the ordered fashion I described above. My thinking is to publish the data to one queue but the challenge is to ensure that all A's are put on the queue before their B is. I don't just want a priority queue whereby all A's are processed before B's because if that happens B's will never be processed. but I simply want to avoid reading a B off the queue before I've read it's A.

    No version number and no clarity of what you are trying to accomplish.
    Without knowing that the problem is a nail ... I'd hardly be recommending using a hammer.

  • Join the two JInternalFrame into one

    hi everybody,
    What can I do to join two JInternalFrame into one, like I have 2 floating panel then I join it into 1 by using JTappedPane. That you can drag to spit it out or join together !
    thanks,
    Quin

    I think you mean saving two images side-by-side into one image. You won't be able to this with a native iphone app, but you may find a third party app on the AppStore to do this. Try this http://itunes.apple.com/us/app/two-faces-photo-sharing/id406310161?mt=8 if you want more help, email me at [email protected]

  • Combining output of 2 spools into one

    Hi guys,
    I have 2 program which are called by main program both are generating spools.
    I want to combine the outputs of both the spools into one file(eg pdf).
    Can anyone suggest how to do this if possible.
    Regards,
    Guru

    hi
    good
    If you create repeated spool requests in the same transaction, you can combine them into one spool request. For you to be able to do this, this option must be deactivated for the spool request to which you want to add the others.
    If you do not select this field, the spool system automatically adds additional spool requests that have the same attributes (user, title, output device, client from which the request was issued, number of copies, priority, cover sheet setting, archiving mode, and ABAP session number).
    For a spool request to be added to another, you must deactivate the New Spool Request option when creating the spool request.
    If you are combining requests, note the following rules:
    -         If the expiration dates of combined spool requests are not the same, the spool system uses the latest date for the entire spool request.
    -         To print out a "combined" spool request, set the Print immediately option on the last of the spool requests that is to be added. The spool system adds the last spool request and then sends the entire "combined" spool request to the output device.
    If the following situations exist, you cannot add any additional requests:
    -         A request is "completed" and cannot have additional jobs added to it when it has been sent to the host spooler for printing.
    -         No other spool requests can be added to a spool request you generated with the Print immediately option set or that you sent to the printer from the output controller.
    For more information, see Adding Spool Requests to Another Spool Request.
    ·        Delete After Printing if No Errors: If this field is selected, the spool request, output request, and output data are deleted automatically after the request has been successfully printed.
    The spool system retains spool requests that contain errors. You need to delete requests of this type manually. Otherwise, they are automatically deleted during a reorganization of the spool database after the expiration date.
    The delete option is set in a user's master record and can be changed:
    -       When a spool request is created
    -       In the request attributes () for the spool request
    thanks
    mrutyun^

  • How to Combine two queries into One

    Hi Gurus,
    SQL> select * from v$version;
    BANNER
    Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
    PL/SQL Release 10.2.0.4.0 - Production
    CORE    10.2.0.4.0      Production
    TNS for Linux: Version 10.2.0.4.0 - Production
    NLSRTL Version 10.2.0.4.0 - Production
    SQL>
    I have following two queries. How I can convert these two queries into one with the same result ?
    Q1
    SELECT id,vdate,vendorname,venddate,vid
    FROM VENDOR
    WHERE processid=32
    AND venddate is null
    AND vid in(select vid from view_vid where type='PDX')
    AND (id,vdate) not in (select id,vdate from vkfl_is where task_id=55)
    AND (id,vdate) in (select id,vidate from market_data where marketed_date is null)
    AND id not in (select id from location)
    Q2
    SELECT id,vdate,vendorname,venddate,vid
    FROM VENDOR
    WHERE processid=20
    AND venddate is null
    AND vid in(select vid from view_vid where type='PBX')
    AND (id,vdate) not in (select id,vdate from vkfl_is where task_id=40)
    AND (id,vdate) in (select id,vidate from market_data where region_date is null)
    AND id not in (select id from location)
    I can UNION these two queries, but, is there any way I can write a single query with which gives me same result as above two queries?
    Any help would be highly appreciated
    Thanks in advance

    Hi,
    You can do something like this, which will be more efficient than a UNION:
    SELECT  id, vdate, vendorname, venddate, vid
    FROM  vendor
    WHERE  (   (    -- Conditions that apply only to q1
                               processid = 32
                AND  vid       IN (SELECT vid FROM view_vid WHERE type = 'PDX')
                AND (id,vdate) NOT IN ( SELECT id, vdate
                                        FROM   vkfl_is
                                        WHERE  task_id = 55
                AND (id,vdate) IN ( SELECT id, vidate
                                    FROM   market_data
                                    WHERE  marketed_date IS NULL
            OR  (  -- Conditions that apply only to q2
                     processid = 20
                AND  vid       IN (SELECT vid FROM view_vid WHERE type = 'PBX')
                AND (id,vdate) NOT IN ( SELECT id, vdate
                                        FROM   vkfl_is
                                        WHERE  task_id = 40
                AND (id,vdate) IN ( SELECT  id, vidate
                                    FROM  market_data
                                    WHERE  region_date IS NULL
                   -- The remaining conditions apply to both q1 and q2
    AND     venddate   IS NULL
    AND     id         NOT IN (SELECT id FROM location)
    I hope this answers your question.
    If not, post  a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
    Explain, using specific examples, how you get those results from that data.
    See the forum FAQ: https://forums.oracle.com/message/9362002

  • Merging two cubes into one

    Is it possible to merge two cubes into one , if so how ??

    Hi
    Can u please check how we merge two cubes with 1st with 8 dimension ,
    and in other 7 dimensions, both has the same dimension.
    but in these cube when they r doing the demand planning, they r doing on different levels.
    We have one option of merging the cubes but planning across the two cubes
    or
    same cube with alternate hierarchy.
    what all things i have take in to consider while doing this.
    Please reply

  • Merging of  two rows into one

    HI,
    Would you help me to write aquery such that merges two data into one,
    for example,
    Take a table Student
    Its content are
    Roll no Name
    1 Rahul
    2 Shyam
    We reqiure a query such that we get out put as
    Rahul;Shyam

    http://www.oracle-base.com/articles/10g/StringAggregationTechniques.php

  • Get value of two fields into one field

    Hellou,
    i need little help with javascript again
    Currently i'm using code below to get value from one field to other:
    getField("Text35").value = getField("Text1").valueAsString;
    Now i'm wondering how to change this code, so i could get values from two fields into one. For example i have field "firstname" and field "lastname", now i want to show this in field "name".
    Example, if field firstname have value John and field lastname value is Doe, i want to show it in field name like "John Doe".
    I hope that u understood what i want
    Thanks for helping me!

    getField("Text35").value = getField("Text1").valueAsString + " " +
    getField("Text2").valueAsString;

Maybe you are looking for