Two XML outputs to one

Hi,
select * from (select
XMLAGG(XMLELEMENT (emp, XMLFOREST(empno, ename,job)))
from
emp)q
union all
select * from (select
XMLAGG(XMLELEMENT (emp, XMLFOREST(deptno, ename,job)))
from
emp)b
I have two XML querys q and b i want both output in asingle XML file for that iam using union all,butwhicle generating XML file
i have to give manully rootnode for the output.Can it be done in the query its self.
Thanks

select XMLELement
             "root"
                 select XMLAGG
                   from ..
                 where ..
                 select XMLAGG
                    from ...
                 where ...
from DUAL

Similar Messages

IMac: using two monitor outputs as one

Hello! We are using last generation 23" iMac at a church with GTX 750m. It has two thunderbolt outputs. I want to use both ports to send same signal: one to VGA projectors with 1024x768 resolution and second to HDMI live broadcasting equipment with 1080x1920 resolution. Problem is that presentation software can send signal to one of them but not to both. Is there a way to parallel thunderbolt ports or to combine them in one using third party software?

Hello! We are using last generation 23" iMac at a church with GTX 750m. It has two thunderbolt outputs. I want to use both ports to send same signal: one to VGA projectors with 1024x768 resolution and second to HDMI live broadcasting equipment with 1080x1920 resolution. Problem is that presentation software can send signal to one of them but not to both. Is there a way to parallel thunderbolt ports or to combine them in one using third party software?

Two sound outputs on one box

Is it possible for one to configure a system to use two sound outputs: 1) HDMI and 2) standard RCA stereo out? My goal would be to have the main system sound use the HDMI (applications like mplayer for example) and to also have mpd to use the standard RCA stereo out. I'm currently using pulse audio but am open to anything.
Thanks for the advice.

I just tried it. I set account A to use internal speaker, B to use iMic audio output. I started iTunes on each account. I can fast user switch and A always plays through the internal speaker, B though the iMic.

I have two .xml files with one audio .mp3 file each; one that has been submitted to itunes and accepted. When I try to submit the other .xml file to itunes, with a different .mp3 audio file and changed metadata, Itunes says it has already been submitted.

http://itunes.apple.com/us/podcast/village-parkway-baptist-church/id520252317

iTunes is using your feed at http://vpbc.downloadsvr.com/Podcasts/Audio%20podcasts/VPBC%2004152012%20audio%20 podcast%20945%20service.xml
When you want to add a new episodes to your podcast you don't make a new feed: you add the episode to the existing feed, then subscribers will see it immediately and the iTunes Store will pick it up in 1-2 days. You don't need to resubmit the feed - indeed you can't.

Controlling XML Output from a Crystal Report

Hi guys,
I need to provide an XML output from one of my reports. The customer has defined his schema and I have tried to implement it using the 'XML Expert" With reference to the two snippets below:
this is what I want:
<DEPADDR>ZBTJ</DEPADDR>
<ACFTYPE>EMB145</ACFTYPE>
and this is what I get:
<DEPADDR FieldName="{@DEPADDR}">ZBTJ</DEPADDR>
<ACFTYPE FieldName="{@ACFTYPE}">EMB145</ACFTYPE>
Does anyone know how to suppress "FieldName="{@DEPADDR}"" from the output? In the XML Expert Dialog both the name, which prints, and the type, which doesn't, are greyed out so you can't do anything with them. There is a "Suppress XML Tag" tick box but that seems to have no effect on what is included in the export.
Thanks in advance
Richard

Duplicate of
Crystal reports with a DB procedure
Closing and locking this thread
Ludek

Xml output format in sql*plus problem

Hi all,
In stead of seeing xml output in multiple line format, my sql*plus always returns xml output in ONE line, is there a way to change the format, it's really hard to read.
Thanks
1 select xmlelement("row", xmlelement("user", xmlattributes(username as "name", default_tablespa
2 from dba_users
3* where rownum=1
SQL>/
XMLELEMENT("ROW",XMLELEMENT("USER",XMLATTRIBUTES(USERNAMEAS"NAME",DEFAULT_TABLES
<row><user name="SYS" tbs="SYSTEM"></user></row>
however I want to see something well formatted like
<row>
<user name="SYS" tbs="SYSTEM"></user>
</row>

Not sure if there are any settings with the SQL*PLUS but if you use packages other than the SQLX operators like DBMS_XMLQUERY, DBMS_XMLGEN, SYS_XMLGEN to generate xml then the output is as desired.
select dbms_xmlgen.getxml('select username, default_tablespace from dba_users
where rownum=1') from dual
DBMS_XMLGEN.GETXML('SELECTUSERNAME,DEFAULT_TABLESPACEFROMDBA_USERSWHEREROWNUM=1'
<?xml version="1.0"?>
<ROWSET>
<ROW>
<USERNAME>REVIEW</USERNAME>
<DEFAULT_TABLESPACE>METRICS</DEFAULT_TABLESPACE>
</ROW>
</ROWSET>
But these packages does not offer the flexibility you have with SQLX operators.
so if you requirement is simple generation you can use the above method.

Can we Concatinate two XML files to a single output?

I was stuck up with one scenario where I am getting a XML file output from a File Adapter say x1.
And another XML file output say x2 from other adapter. Now I want to club this two XML files into a single output where it should contain the contents of x1 and x2
When I am doing the Transformation I am getting the two files in the output folder but I want single file as output. Is it possible with ESB? If so Please suggest.
--Chandra

Hi Chandra,
Maybe the enrichment interaction scenario would work in your case.
My colleague Lucas Jellema wrote a blog post on it: http://technology.amis.nl/blog/?p=1464.
Or putting the same in a larger perspective: http://www.oracle.com/technology/pub/articles/jellema-esb.html.
Hth,
Sjoerd

Run two reports but generate one output

I have developed two reports, one is a detail (portrait style) and another is a summary report (landscape). Now I need to provide an option that will run both the reports but display the output in one document (the document should contain both the detail and summary content).
Ideal scenario would be to call the report one after another but capture the output in one file but I am not sure whether it's possible in Reports.
Any help is highly appreciated. Thanks in advance.
Sundar

Hi DC,
Thanks for your reply. I tried to figure out how to create a new section by looking at the document i have (building reports), it directs me to create a new report block and treat it as a new report. Is that what you meant? I tried to follow the report wizard but it's only displaying the summary total columns not the details (i know it's difficult to troubleshoot without viewing the report). I just want to make sure i am at the right place creating a new report section.
Again thanks for your reply.
Sundar

Need to join the two xml type output in plsql function

Hi,
I need to join the two xml type output in plsql function. Could you help me out?
Sample function:
function func_ret_stk return xmtype
xmloutput_stk xmtype;
xmloutput_desp xmtype;
begin
xmloutput_stk := --------;
xmloutput_desp :=---------;
return xmloutput_stk + xmloutput_desp;
end ;
Thanks in Advance,

Hello,
this is the forum for the tool {forum:id=260}.
Please ask your question in {forum:id=157} or {forum:id=34}
Regards
Marcus

Mac Pro with two graphic card each one with two dvi output, can I extend deskop to three outputs?

Mac Pro with two graphic card each one with two dvi output, can I extend deskop to three outputs?

MAC OS 10.7.4 3.2GHz Quad-Core Intel Xeon processors, 12GB of 800MHz DDR2 and 2 ATI Radeon HD 2600 XT 256MB (two dual-link DVI ports) . The problem is, I woul like to use one output as main and the three others as secondary or extended desktop but the system don't allow me use two diferent video cards this way.

XML output with multiple tags in one line

I have not done much XML exporting with SQL. Previously I had just been ending my SQL queries with
FOR XML RAW ('Company'), ROOT ('Companies'), ELEMENTS;
and it formatted my query nicely in an XML output. That put every column name as a tag and the cell data within the tag.
However, now the criteria has changed on me. I need to create a tag with multiple sub tags in it.
Example: <Location Floor="10" Suite="512" DoorType="Metal">
But I'll still need other tags to be normal in the XML output such as
<Address>123 Fake St</Address>
<City>Springfield</City>
<Location Floor="10" Suite="512" DoorType="Metal">
Is there any way to get this XML mixed in the output like above?
Thank you for any help.

Hi, you can FOR XML PATH for a finer degree of control over your XML. Use the @ symbol to create attributes. Here's a simple example:
DECLARE @t TABLE ( rowId INT IDENTITY PRIMARY KEY, [address] VARCHAR(50), city VARCHAR(30), floor INT, suite INT, doorType VARCHAR(20) )
INSERT INTO @t VALUES
( '123 Fake St', 'Springfield', 10, 512, 'Metal' )
SELECT
[address] AS "Address",
city AS City,
[floor] AS "Location/@Floor",
suite AS "Location/@Suite",
doorType AS "Location/@DoorType"
FROM @t
FOR XML PATH ('Company'), ROOT ('Companies'), ELEMENTS;

How to compare the contents of two XML documents

Hi all,
I was trying to compare the contents of two xml documents, they are both validate for the same XML Schema. i was using the xmlunit to do this. but some how it doesn't work like what i have expected. for example:
1.xml : <test><item>2</item><item>1</item></test>
2.xml: <test><item>3</item><item>2</item><item>1</item></test>
the result from XMLUnit is this two xmls are different, but it compares <item>2</item> with <item>3</item>, which i cannot find out where the real diiffs are.
does anybody know how i can do this correct?
best regards,
tina

I faced a similar problem in one of my projects and hence wrote my own comparator. Most comparators like ExamXML etc show XML as different if the nodes under a parent node occur in different seqeunce or a set of repeated nodes occur in different sequence. The comparator that I wrote gives you the flexibility to configure how to identify a node from a set of repeated nodes and is able to compare them successfully if they occur in any order. You can view the sample output at http://geocities.com/dheerendra_itbhu/TipsFromDheeru.html
and contact me in case you need the source code.

XML Elements Ordering in Generated XML Output

I have a requirement where I need the xml element tags to appear in the generated xml output in the same order as in data template definition but in my case this is not happening. I have one master group - Customer and two subgroups - BillingAddress and ShipToAddress. The subgroups appear below some master elements eg. Contact but above other master elements eg. Telephone . However when the xml output is finally generated all the Master Elements appear first followed by the subgroup elements. Does anyone know how I can rectify this?
See below:
my data template structure is as follows:
- <group name="Customer" dataType="varchar2" source="Q_MASTER_FILE_CUST">
<element name="CustomerID" datatype="varchar2" value="CUSTOMER_NUM" />
<element name="CustomerTaxID" datatype="varchar2" value="TAXPAYER_ID" />
<element name="CompanyName" datatype="varchar2" value="COMPANY_NAME1" />
<element name="Contact" datatype="varchar2" value="CONTACT_NAME" />
- <group name="BillingAddress" dataType="varchar2" source="Q_MF_CUST_BILLTO">
<element name="BuildingNumber" datatype="varchar2" value="BUILD_NUM1" />
<element name="StreetName" datatype="varchar2" value="STREET_NAME1" />
<element name="AddressDetail" datatype="varchar2" value="ADDRESS_STYLE1" />
<element name="City" datatype="varchar2" value="CITY1" />
<element name="PostalCode" datatype="varchar2" value="POSTAL_CODE1" />
<element name="Region" datatype="varchar2" value="COUNTY1" />
<element name="Country" datatype="varchar2" value="COUNTRY1" />
</group>
- <group name="ShipToAddress" dataType="varchar2" source="Q_MF_CUST_SHIPTO">
<element name="BuildingNumber" datatype="varchar2" value="BUILD_NUM2" />
<element name="StreetName" datatype="varchar2" value="STREET_NAME2" />
<element name="AddressDetail" datatype="varchar2" value="ADDRESS_STYLE2" />
<element name="City" datatype="varchar2" value="CITY2" />
<element name="PostalCode" datatype="varchar2" value="POSTAL_CODE2" />
<element name="Region" datatype="varchar2" value="COUNTY2" />
<element name="Country" datatype="varchar2" value="COUNTRY2" />
</group>
<element name="Telephone" datatype="varchar2" value="PHONE_NUMBER" />
<element name="Fax" datatype="varchar2" value="FAX1" />
<element name="Email" datatype="varchar2" value="EMAIL_ADDRESS" />
<element name="WebSite" datatype="varchar2" value="URL" />
</group>
</group>
My XML Output is as follows:
<Customer>
<CustomerID>1000</CustomerID>
<CustomerTaxID>65-94238654</CustomerTaxID>
<CompanyName>World of Business</CompanyName>
<Contact>MS. Jolene Smith-Kelly</Contact>
<Telephone>8441212</Telephone>
<Fax />
<Email />
<WebSite />
- <BillingAddress>
<BuildingNumber />
<StreetName />
<AddressDetail />
<City>San Jose</City>
<PostalCode>95053</PostalCode>
<Region>Santa Clara</Region>
<Country>US</Country>
</BillingAddress>
- <ShipToAddress>
<BuildingNumber />
<StreetName />
<AddressDetail />
<City>San Jose</City>
<PostalCode>95053</PostalCode>
<Region>Santa Clara</Region>
<Country>US</Country>
</ShipToAddress>
</Customer>
It should be as follows:
<Customer>
<CustomerID>1000</CustomerID>
<CustomerTaxID>65-94238654</CustomerTaxID>
<CompanyName>World of Business</CompanyName>
<Contact>MS. Jolene Smith-Kelly</Contact>
- <BillingAddress>
<BuildingNumber />
<StreetName />
<AddressDetail />
<City>San Jose</City>
<PostalCode>95053</PostalCode>
<Region>Santa Clara</Region>
<Country>US</Country>
</BillingAddress>
- <ShipToAddress>
<BuildingNumber />
<StreetName />
<AddressDetail />
<City>San Jose</City>
<PostalCode>95053</PostalCode>
<Region>Santa Clara</Region>
<Country>US</Country>
</ShipToAddress>
<Telephone>8441212</Telephone>
<Fax />
<Email />
<WebSite />
</Customer>
is anyone able to advise?
Rani

If you know the changes necessary then you could write an XSL transformation to do them. But a generalized piece of code that examined an XML document and a schema, then produced a corrected document, would be quite difficult to write.

Two message mapping in one interface mapping

hi,
my scenario is idoc to file and i am using java mapping(not UDF) for some fields as well as graphical for rest of the fields.
I want to add these two mapping program in one interface mapping to generate final target, but the problem is it is not creating final file structure, but when i add only one mapping(either one) it works fine.
I'm doing this because I have to add value mapping, after the value i get through java mapping or is it possible to use static value mapping within the java mapping itself.
Please help.....

Hi,
In addition to what Moorthy said you first test mapping individually and see if it works fine. While testing you make sure you are giving the right input, I mean if Java mapping comes second you need to give the output XML of the Graphical mapping or vice versa.
Hope in Java mapping is done properly and you are returning the expected structure as output. For example if you are using Java mapping as the first one your ouput should be exaclty like that of source structure with the values filled.
Regards,
Prakash

How to merge two xmls.

Hi All,
I want to merge two xmls in my output. My scenario is I am getting two sets of outputs and I want to merge them to get my final output. I my output I have a header and a Lineitem. I my final output I want to keep header only once and all the LineItems one by one.Can anyone suggest something.
First outout:-
<outputVariable>
-<part name="payload" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-<SiebelOrderQueryByExample_Output xmlns="http://siebel.com/asi/">
-<ns:SiebelOrderQueryByExample_Output xmlns:ns="http://siebel.com/asi/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-<ListOfOrderInterface xmlns="http://www.siebel.com/xml/Siebel%20Order">
<Orders>
<Id>1-15IXJ</Id>
<OrderNumber>1012-1234</OrderNumber>
<ListOfLineItems>
<LineItems>
<Id>1-15IY3</Id>
<OrderNumber>1012-1234</OrderNumber>
<LineNumber>301</LineNumber>
</LineItems>
</ListOfLineItems>
</Orders>
</ListOfOrderInterface>
Second output:-
<outputVariable>
-<part name="payload" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-<SiebelOrderQueryByExample_Output xmlns="http://siebel.com/asi/">
-<ns:SiebelOrderQueryByExample_Output xmlns:ns="http://siebel.com/asi/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-<ListOfOrderInterface xmlns="http://www.siebel.com/xml/Siebel%20Order">
-<Orders>
<Id>1-15IXJ</Id>
<OrderNumber>1012-1234</OrderNumber>
<ListOfLineItems>
<LineItems>
<Id>1-15IW2</Id>
<OrderNumber>1012-1234</OrderNumber>
<LineNumber>302</LineNumber>
</LineItems>
</ListOfLineItems>
</Orders>
</ListOfOrderInterface>
The required output which I want after merging.
<outputVariable>
-<part name="payload" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-<SiebelOrderQueryByExample_Output xmlns="http://siebel.com/asi/">
-<ns:SiebelOrderQueryByExample_Output xmlns:ns="http://siebel.com/asi/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-<ListOfOrderInterface xmlns="http://www.siebel.com/xml/Siebel%20Order">
-<Orders>
<Id>1-15IXJ</Id>
<OrderNumber>1012-1234</OrderNumber>
<ListOfLineItems>
<LineItems>
<Id>1-15IW2</Id>
<OrderNumber>1012-1234</OrderNumber>
<LineNumber>302</LineNumber>
</LineItems>
<LineItems>
<Id>1-15IY3</Id>
<OrderNumber>1012-1234</OrderNumber>
<LineNumber>301</LineNumber>
</LineItems>
</ListOfLineItems>
</Orders>
</ListOfOrderInterface>
Thanks

I am not using file adapter. I am taking inputs from the BPEL client and displaying output to the client. My input xsd is:-
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.example.org/ns/intorder"
targetNamespace="http://www.example.org/ns/intorder"
elementFormDefault="qualified">
<xsd:element name="order" type="orderType">
<xsd:annotation>
<xsd:documentation>
A sample element
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:complexType name="orderType">
<xsd:sequence>
<xsd:element name="Order_Number" type="xsd:string"/>
<xsd:element name="Line_item" type="LineType" maxOccurs="unbounded" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="LineType">
<xsd:sequence>
<xsd:element name="Line_Number" type="xsd:string" />
</xsd:sequence>
</xsd:complexType>
</xsd:schema>

Two XML outputs to one

Similar Messages

Maybe you are looking for