Type of fiber for zx sfp
hi, i have the following problem:
i cannot get a zx sfp to come up. i was wondering if you guys could provide the right fiber to use with a back-to-back zx sfp setup.
at the moment we're using 9/10 single mode fiber and they won't come up.
we've used the right attenuators and even a power meter and see no light coming out of the sfp. we even tried lx sfps and they do not come up either. we even tried a small fiber loop that i borrowed from cisco local office and that did bring up the interfaces.
but the thing is, i'm confused:
can either an lx or an zx sfp come up when using sm 9/10 fiber? (with the same fiber).
if not, shouldn't the lx come up?
any ideas?
regards,
c.
Well first of all if you are going to be connecting these routers or switches up back to back I would not be using the zx series. Stick with the lx because those are designed for shorter distances and they TX at a range of -3 to -9 and RX at -3 to -19. It seems that they make a MM and a SM version of the LX/LH card. I would try to find out if yours if MM or SM, if MM use the obvious and if SM than 9/10 will be fine along with the ZX SFP. One other thing with the LX is that you might need to insert a mode conditioning patch cord it the mix too. Another thing is that you can't mix and match the cards either, it should be an lx to lx or zx to zx. You are definetly having problems though if you are not seeing any light come out of the SFP, ensure you have your gear set to the correct wavelength to measure it properly. It will be 1300 for the LX and 1550 for the ZX. With the cable you used from cisco, did it work for both the LX and ZX SFP's? I hope this helps a little bit.
Similar Messages
-
SRM 4.0- How to set the default values for product type (01) only for SC
The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF -
Which SIM card does the iPad mini take? Does it have to be specific type of SIM for the iPad mini?
Welcome to the Support Communities. The answer to your question is available in Apple's website — see the Input/Output section here:
http://www.apple.com/ipad-mini/specs/ -
"No transaction type is available for creating a transaction" service order
Hi all,
I am new in IC .
I try to create service order or service ticket for incoming calls
We are using CRM 7.0
After I confirm the account I try to create service order
But no screen displayed and error "No transaction type is available for creating a transaction" occurs
in customizing there is a transaction type SRVO, also I copied it to ZRVO
But here how can I define that this transaction type is assigned to this application??
Please reply in detail steps.
Thank you.Hi Rupesh,
Thanks for your reply..
I made a lot of controls but I can't find where I am wrong..
My senario is, taking phones, create interaction record and create order for further investigation.
I copied IC_AGENT role.
I copied transaction type 0010 to Z010
I create business transaction named ZBTP for transaction type Z010
I made Define Transaction Types for Navigation for Z010
Then Define Business Role -> Assign Function Profiles
Here I assign my business transaction ZBTP to IC_BT function profile
But when I connect tot the system with user having this business role
I can create interaction record with type Z010, it is ok.
When I press Service Order it gives this error.
Work center id for Service order is : IC_UIU_SVO
I copied my business role from IC_AGENT, and here this work center id was not active
In my business role I made it active. Is this work center can't used in IC senario
Also how can I understand which transaction type is needed for it??
If I know which transaction type is needed to create service order or service ticket under IC, then I will control it of course..
I also copied transaction type TSVO(service IC) to ZSVO and do the above things for this type too..
But nothing changed..
Please help !! -
Can i use technical system type 'third party' for r3 system in idoc2file sc
Hi,
i am doing a sample out bound scenario (idoc 2 file), distributing idoc from sap system to csv file (in same network). in this can i use thchnical system type 'third party' for R3 system. will the scenario work properly or not.
And some times some of the business systems in SLD are not visible in ID, when assigning business system in ID.can any one tell reason for this.
can any one suggest me,........ Thanks in advance & would be appreciated.
Regards
RajeshHi,
<i> can i use thchnical system type 'third party' for R3 system. will the scenario work properly or not.</i>
--- No u can't use this...Ur technical system must be "WebAS ABAP" only. For file system you use 3rd party system. means ur technical system like follows.
sender
R/3 -- WebAs ABAP
Receiver
File - 3 rd pary system
<i>And some times some of the business systems in SLD are not visible in ID, when assigning business system in ID.can any one tell reason for this.</i>
Click "Clear SLD cache" repeatly for some time in ID, it will come.
regards,
Ansar. -
i just updated my ipod 4g to ios 5.1 and i cant download apps a message pops up saying to type in password for caldav something something the thing is that i have no idea what my password is i never made an account for that so please help
Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
Therefore, remembe the passcode that you enter this time.
It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup. -
I have the latest iTunes but am unable to update my phone or my ipad 2 I have been in to the shop and they said I need to download a different type of iTunes for wifi I have a desk top with windows vista and wifi can you please help
We'll need more information before anyone can be of much help. What model iPhone is it, what versions of iOS are running on the iPad 2 now, what exactly are you trying to update, and what version of iTunes are you running? And what exactly is going wrong (include error messages if any).
Once we have that information, someone here can probably offer advice. Note that you cannot sync content or upgrade iOS wirelessly until you get your iPhone and iPad up to iOS 5 and that requires that you connect those devices to your computer via the Dock-USB cable.
Regards. -
How to define certain document type (BKPF-BLART) for certain movement (101)
Sometimes ( I think it is becuase of the tcode) certain purchase 101 movements create a WA type FI document and some other times purchase 101 movements create WE type FI documents. I have seen a table ( accessing from omba transaction) in which for diffenent tcode´s we have either WE or WA. If we always use migo transaction why sometimes in bkpf we have migo_tr, migo_gi, ....;....
How should I do in order to create always WE FI documents for purchase 101 movements?
Thanks in advance.Check the settings in SPRO-MM-Inventory Management-Number assignemnt-Define number ranges for accounting documents.
Here you assign accounting document type to tcodes.
Normally , WA is used in receipts for MB1C/MIGO_GI tcode - for e.g for 561 mvmt type.
SAP recomends keeping this setting as it is.
SAP help text copied here for reference:
Define Number Assignment for Accounting Documents
In this step, you set the number ranges for the accounting documents which are created when goods movements or inventory differences are posted.
Accounting documents in inventory management
For accounting-relevant goods movements, the system creates two different documents:
material document
accounting document
Both the material documents and the accounting documents have their own document numbers. When inventory differences are posted, the system also creates an accounting document for the physical inventory document.
In this step, you only maintain the number assignment for accounting documents.
Document types
Accounting documents are split into document types to allow differentiated document number assignment, which is the basis for distinguishing between the various accounting operations. A number range is assigned to each document type. In a company code, you have to define number intervals for each number range and fiscal year.
In inventory management, the transaction determines which document type is used.
Example: Goods receipt for purchase order
Requirements
You have already defined the company code.
Default Settings
In the standard SAP System, the following document types are predefined for inventory management:
WA for goods issues, transfer postings, other goods receipts
WE for goods receipts with reference to purchase orders
WF for goods receipts with reference to production orders
WI for inventory differences
WL for goods issues with reference to deliveries (SD)
WN for net posting of goods receipts
PR for revaluation documents
Each document type is already assigned a number range. In company code 0001, number intervals are defined for each number range both for the current and the previous fiscal year.
Number range 49 with the year-related interval 4900000000 to 4999999999 is assigned to the document types for all goods movements, except goods movements with reference to purchase/production orders.
Document type WE is used for goods receipts with reference to purchase orders and production orders. This document type is assigned number range 50 with the year-related interval 5000000000 to 5099999999.
Please note that net postings of goods receipts (document type WN) are not active in the standard SAP System. If you want to post goods receipts net, you have to assign document type WN (instead of WE) to the transaction MB01.
Document type WI is used for posting inventory differences. This document type is assigned the number range 01 with the year-related interval 0100000000 to 019999999999.
SAP Recommendation
Activities
1. Check whether you can use the standard settings.
2. If not, you have to add new document types to satisfy your requirements:
a) Define a new document type under Financial accounting document
b) types.
c) Assign a number range to the document type.
d) Under Financial accounting number ranges, define the year-related number intervals for the given number range in your company code. If you do not want to use the year-related number assignment method, enter 9999 in the Year field.
e) Under Allocate document type to transaction, assign the relevant document type to the transaction codes of inventory management.
Document type PR (revaluation documents) is already assigned.
Notes on transport
You transport number range objects as follows:
Choose Interval -> Transport in the accounting document Number Range screen.
All intervals for the selected number range object are deleted in the target system first. After the import, only the intervals you export are present. The number statuses are imported with their values at the time of export.
Dependent tables are not transported or converted.
All other activities are linked to the automatic transport.
Edited by: Saurav on Jan 24, 2011 6:03 PM -
Two types of outputs for goods receipt
Dear all guru,
we are making GR for suppose 5 items.
and here we are printing GR document for store record with having all 5 items in single document.
and also we need to take additional printout for 5 items seperately for GR Tag for keeping with material lot.
so we need 6 print outs.
Pl guide me how to use two output types and one is based on collective and one is individually for each item.
Regards,
VimleshTricky one!!
I belive you can controll it by using the appropriate Output type for eg:
Output type WE03 is for all line items in an GR document.
Output type WE01 is for seperate line item in GR documnt.
The issue is you can mantain only one output type at a time.
The general solution would be mantain WE03 as default output type and later for seperate line item print out go to MB02 and change the output type to WE01 and save it and process the output using MB90 with refrence to Material document.
For other customized solution need to be coded for the output determination procedure, get help from your ABAPER. A customised hard coded routine need to be insert in the procedure for the output type you want to use.
Hope it helps..
Regards,
Sujoy -
Output type not created for outbound delivery while using SHMNT05 idoc type
Hi Experts,
Please help me to solve the below issue.
Problem:- I want to to generate an IDOC(using type SHPMNT06) once the PGI is done for an outbound delivery.
Already it is working fine when used DESADV.DESADV01 or DESADV.DELVRY07. But now the output type is not getting created when used SHMNT.SHPMNT06. I have created a separate output type ZPJ7 just as a mirror copy of the earlier output type(ZPJ6) used for DESADV.DELVRY07.
Question:- Is it possible to use idoc SHPMNT06 instead for DESADV01 or DELVRY07? If yes then what are steps to be followed?
The reason why SHPMNT06 idoc is planned:- We have a scenario to send outbound delivery to 3rd party system via XI. If the outbound delivery is for National(Not for Export) and PGI is completed then send the idoc straight forward to XI otherwise DO NOT generate the idoc, but just create the delivery. Collect all the deliveries in a transport and send it in a shipment. The shipment details can be sent using SHPMNT idoc. Now from XI perspective, if we can utlitze the same SHPMNT idoc for the National delivery(1st case) then perhaps this will require less effort. Hence shipment idoc is required to be generated when the delivery is created and PGI is done.
Also it would be great if you can advice some better way to solve above mentioned scenario.
Many Thanks,
SanjayThere could be several reasons. Go to the document and in the extras-output check output determination analysis in the processing log.
If the output has been created successfully then you need to see your printer determination. Ask basis to check it up. If the problem is that even the print preview is not coming. Check your communication in the output analysis and ensure LOCL is selected. Any other printer will need to be configured.
If thats done already then check whether you have maintianed the condition record.
If that too is done then check whether your output type has been assigned to the output procedure and that the output type is listed in the procedure.
regds
Jude -
Valuation Type is missing for Material and Batch
Hi Experts,
I am facing issue related to delivery.
While creating Order to cash cycle for one sales area, there is no error at all, but when I am trying to repeat the same cycle with same customer and material, different sales area and document type, I am not able to save delivery document. and receive error as "Valuation Type is missing for Material X and Batch Y".
Kindly suggest possible errors.
Regards,
HimmanshuCheck whether the required Valuation type is maintained in material master. Also, update the error message number.
G. Lakshmipathi -
What data type is used for storing password,
What data type is used for storing pass word in oracle db, i mean if user inputs some thing from forms it should be in Encrypted form in db, please any help??
Thank you
HinaData type is VARCHAR2:
SQL> desc dba_users;
Name Null? Type
USERNAME NOT NULL VARCHAR2(30)
USER_ID NOT NULL NUMBER
PASSWORD VARCHAR2(30)
ACCOUNT_STATUS NOT NULL VARCHAR2(32)
LOCK_DATE DATE
EXPIRY_DATE DATE
DEFAULT_TABLESPACE NOT NULL VARCHAR2(30)
TEMPORARY_TABLESPACE NOT NULL VARCHAR2(30)
CREATED NOT NULL DATE
PROFILE NOT NULL VARCHAR2(30)
INITIAL_RSRC_CONSUMER_GROUP VARCHAR2(30)
EXTERNAL_NAME VARCHAR2(4000)
PASSWORD_VERSIONS VARCHAR2(8)
EDITIONS_ENABLED VARCHAR2(1)
AUTHENTICATION_TYPE VARCHAR2(8)You can use SQL function ORA_HASH to hash password: http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/functions124.htm#SQLRF06313. -
Order type dependent parameters for process order
Hello friends,
In Order type dependent parameters for process order (T.C COR4), there is subscreen for Process data documentation.Inside it we have three options :a) Batch Record Required
b) Order Record Required
c) No Process Data Documentation Reqd.
Through F1 help whatever information i have got regarding them, is not cleared.
According to it, if i select Order Record Reqd, than first of all i will have to delete (archieve) the order record than only i can delete (archieve) the process order.The same is with Batch Record Required.
So according to it if i want to delete the process order than first i will have to delete order record.So guys may i know which order record firstly i have to delete?Than only the system status for process order will not have the status ORRQ (Order Record Reqd).
And one more thing friends,if i select the third option No Process Data Documentation Reqd than which process data documentation system will not create?Or what will happen if i select this third option?
Thankingy you guys in advance.HI
For process data documentaion pls check the following link:
http://help.sap.com/saphelp_47x200/helpdata/en/89/a43ea8461e11d182b50000e829fbfe/frameset.htm
Thanks -
Currency type option needed for copa report
Dear Experts,
Currency type option needed for copa report.I have checked all the possibilities in ke35 as well.
how to add curreny type in selection screen for COPA reports.
regards
RKIf you want to create your own report with required currency,
T CODE - KE35 - Click on "Report" (create), next window appears
Give the name of the report and description
The u see 2 options
1. Basic report
2. Report with Form
Select which ever you want and press ENTER
Here you need to prepare the report format and fields which are there in the right side box
Hope it helps
Thanks -
ERROR OGG-01148 programming error, data type not supported for column
I am getting following error when I put null in insert statement
2011-03-31 18:30:45 ERROR OGG-01148 programming error, data type not supported for column TXID in table advoss.tblaudittrail.
I am replicating MySQL 5.5.9 to Oracle 11g rel2 via goldengate 11I am able to diagnose what is cuasing the problem
unsigned flag was the culprit of this error
I am able to insert null after removing unsigned flag.
thank you very much for your kind support
Maybe you are looking for
-
Insert /*+ Append */ and direct-path INSERT
Hi Guys Does insert /*+ Append */ into hint cause Oracle 10G to use direct-path INSERT? and if insert /*+ Append */ into hint does cause Oracle to use direct-path INSERT, does insert /*+ Append */ is subject to the same restrictions as direct-path su
-
2006 MacMini Model A1176 cannot send video to Toshiba TV by S-video or ColorStream adapter
I attempted to hook my Mac Mini to my Toshiba Model 36AF41 TV. Since the TV does not have an HDVI input but does have both S-Video and ColorStripe, I purchased a VGA to ColorStripe/S-Video adapter. I tried the S-Video connection only, then tried the
-
Status in Service Order Confirmation-relevant items
Hi SDNs, When I create a confirmation follow-up from a service order / repair order/ etc, an set it to completed, relevant items in order keep in released status. Shouldn't they get completed too? thanks Pablo
-
Repaired OS 10.4.11 HD prior to installing, Now Won't Mount
I was planning to install Snow Leopard onto a 10.4.11 HD in a MacBook Core Duo running 10.4.11. The MacBook had already been acting strangely, Safari and iTunes both stopped working, but Firefox was working fine. I verified and repaired permissions,
-
Bit Rate too high Error - have specific details about files - please help
Hello- Just finished a project and went to burn the first DVD. It starts muxing the first mpeg2 video file and comes up with this error. Below are the specs for all the files on the DVD. Please take a look and let me know where I went wrong. Thanks a