UC_OBJECTS_NOT_CONVERTIBLE - "MOVE src TO dst" problem

Hi experts.
I've got problem in my application, which appeared in ECC 6.0.
The problem conducts to the following dump:
The statement "MOVE src TO dst" requires that the operands "dst" and "src" are convertible.
Since this statement is in a Unicode program, the special conversion rules for Unicode programs
apply. In this case, these rules were violated
FIELD-SYMBOLS: <fs> TYPE TABLE.
CLASS-DATA lpri_chn_itab TYPE STANDARD TABLE OF gt_sett.
DATA: lwa_deleted LIKE LINE OF lpri_del_itab.
ASSIGN pchange->mp_mod_rows->* TO <fs>.
READ TABLE <fs> INTO lwa_deleted INDEX 1.
MODIFY TABLE lpri_chn_itab FROM lwa_deleted.
Iny idea ?
Thanks

HI Nils ,
Thanks for your reply .
Too add you there has been no changes in the the transfer struture / datasource (BI 7 system).
Plus the datasource is a generic extractor based on a transparent table and i am not sure if the V3 job concepts fits for this senario.
Is there any other possibiliy for this error .
Thanks
Alok

Similar Messages

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

When watching a movie every 7 seconds there is a very short freeze or shutter. The last 5 movies have had this problem.

When watching a movie every 7 seconds there is a very short freeze or shutter. The last 5 movies have had this problem. Iam unsure what to do.

Welcome to the Apple Community.
Check that no special effect or enhancement feature has been turned on on the TV itself.

Is src and dst NAT possible in multiple rules on the ASA?

Hello,
We have +/- 50 customer companies that will have to enter our network via IPsec s2s VPN's and as backup the customers have the option to enter our network via a leased line. Since they can enter multiple routes we give them a source IP depending what side they enter so we know the route back internally in the network to the correct FW they entered.
For the s2s we have to do source NAT on our side since we cannot burden all these customers with different NAT's for both the leased line and for the s2s. And we have to do destination NAT since the customers can access different DMZ systems depending on the application they connect to.
1) source NAT can be 1 NAT rule per company (so hide NAT behind 1 IP)
2) destination NAT is multiple rules (see below)
At the moment we have 12 NAT rules per company since we have configured src and dst NAT in one rule to make it work.
See example below:
Question: How can we configure src and dst NAT in multiple rules so that we dont need 12 NAT rules per company?
ASA cluster: single mode - Active/Standby
asa922-4-smp-k8.bin
asdm-731-101.bin
Src REAL
Src Mapped
Dst MAPPED
Dst REAL
Service
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
11.11.11.1
11.11.11.1
11.11.11.1
11.11.11.1
11.11.11.1
11.11.11.1
11.11.11.1
11.11.11.1
11.11.11.1
11.11.11.1
11.11.11.1
11.11.11.1
19.19.19.90
19.19.19.90
19.19.19.11
19.19.19.11
19.19.19.90
19.19.19.90
19.19.19.180
19.19.19.180
19.19.19.83
19.19.19.83
19.19.19.90
19.19.19.92
10.10.10.42
10.10.10.42
10.10.10.42
10.10.10.42
10.10.10.41
10.10.10.41
10.10.10.44
10.10.10.44
10.10.10.47
10.10.10.47
10.10.10.47
10.10.10.47
53-udp
53-tcp
53-udp
53-tcp
PoP3
SMTP
SMTP
PoP3
http
tcp-5555
http
http

Steve,
That is my whole point. To copy from the PC host memory to the CUDA device memory asynchronously, the host memory must be pinned. Hence, the source and destination memory should be pinned. Otherwise, I must copy the source memory to pinned memory I have allocated on the PC, copy it asynchronously to the CUDA device memory, process it on the CUDA device, asynchronously copy it back to the PC pinned memory, and then copy it to the destination memory.
If you copy synchronously, it is slow as Christmas! Therefore, you must copy the memory asynchronously, or you should not use CUDA and GPU acceleration.
My question still stands. Why is the source and destination memory on the PC used by Premiere Pro not pinned memory?
Gene
Gene A. Grindstaff
Executive Manager, SG&I
T: 1.256.730.6983 M: 1.256.566.5376 F: 1.256.730.8046
E: mailto:[email protected]
Intergraph Corporation
19 Interpro Road
Madison, AL 35758 USA
www.intergraph.com/sgi<http://www.intergraph.com/sgi> |
LinkedIn<http://www.linkedin.com/groups?gid=127267&trk=myg_ugrp_ovr> | Facebook<http://www.facebook.com/intergraph> | Twitter<http://twitter.com/intergraph

Export Movie to MPEG-4 Problem

I am trying to export an .mov file to MPEG-4 with no compression in Quicktime. The movie plays with no problem in Quicktime. However, when I try to export the file (File|Export|Options), the "passthrough" choice is grayed out and "MPEG Improved" is the highest resolution I can output. The video was taken with an Aiptek Action HD, 720p at 30 fps. At the bottom of the Options page opposite "Compatibility" it says "Image data rate too high for MPEG-4 Video Simple Profile Level 1". "Show Movie Properties" indicates the video is format is H.264 at 4.00mbits/sec and the audio is AAC at 31.98kbits/sec. I tried Google but could not find any information. Any help would be appreciated. Thanks in advance for your help.

/System/Library/QuickTime
ApplePixletVideo.component
QuickTimeIIDCDigitizer.component
QuartzComposer.component
QuickTimeMPEG.component
QuickTime Updater.app
QuickTimeMPEG2.component
QuickTime3GPP.component
QuickTimeMPEG4.component
QuickTimeBMPUpdate.component
QuickTimeStreaming.component
QuickTimeComponents.component
QuickTimeUSBVDCDigitizer.component
QuickTimeFireWireDV.component
QuickTimeVR.component
QuickTimeH264.component
/Library/QuickTime
ACTLComponent.qtx
QTFbx.component
AXELplayer.qtx
Zoomify.component
AppleIntermediateCodec.component
ZyGoVideo.component
Microcosm Decode.component
on2vp3.component
I do not have a ~/Library/Quicktime

2950G-24 get follow :SCHAN ERROR INTR: unit=0 SRC=6 DST=5

2950 connect some PCs,
get follow :SCHAN ERROR INTR: unit=0 SRC=6 DST=5
OPCODE=20 ERRCODE=5,
than don't work
why?

HI GhostLover,
Its a bug please go ahead and get the RMA done.
Regards,
Ankur

Portmap translation creation failed for udp src inside dst inside

Hi!
I have a problem with allowing traffic to UC500 subnets on ASA 5505 inside interface.
My asa is a main router with addres 192.168.1.1
UC500 voip box is connected to ASA's inside interface through UC500 WAN port with UC500 with 192.168.1.2 address.
Firewall and NAT on UC500 is disable
UC500 sip traffic works fine. voipbox creates its subnets for data and voip - 192.168.10.0 and 10.1.1.0. another important address is 10.1.10.1 which is UC500 CUE.
My problem is that from within ASA local network (192.168.1.0) i cannot reach UC500 subnets, neither can I reach ASA's local network from the UC subnets.
the log says
3
Sep 07 2013
00:21:49
DC
53
PBXCUE
32901
portmap translation creation failed for udp src inside:DC/53 dst inside:PBXCUE/32901
I tried exempting uc500 subnets on ASA but that didn;t work.
Funny thing is that I CAN reach the UC500 subnets when connecting with VPN to ASA...
Please help! I am not familiar with CLI.
I configured static route to 10.1.10.0 and since then I was able to ping 10.1.10.1 thorugh ASA;s VPN.
I would be grateful for ideas.
Lukasz
global (inside) 1 interface
global (outside) 101 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 101 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface https IIS https netmask 255.255.255.255 dns tcp 200 200 udp 200
static (inside,outside) tcp interface www IIS www netmask 255.255.255.255 dns tcp 200 200 udp 200
static (inside,outside) tcp interface smtp IIS smtp netmask 255.255.255.255 dns
static (inside,outside) tcp interface pop3 IIS pop3 netmask 255.255.255.255 dns
static (inside,outside) udp interface domain RenBetPBX domain netmask 255.255.255.255 dns
static (inside,outside) udp interface 5061 RenBetPBX 5061 netmask 255.255.255.255 dns
static (inside,outside) udp interface sip RenBetPBX sip netmask 255.255.255.255 dns
static (inside,outside) tcp interface 13000 SQL 13000 netmask 255.255.255.255 dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 x.x.x.x
route inside PBXCUE-network 255.255.255.0 RenBetPBX 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy

Hello Julio!
Thank you for your advice.
I have managed to solve my main problem by reconfiguring my switches vlans - enabling trunk port configs for required ports and allowing them access to both vlans.
Now I can see everything from all of my inside networks.
I continue my ASA adventures - I have managed to configure L2TP client access for my windows users, RADIUS authentication for domain users and yesterday night I have managed to configure site to site VPN with my RV120W router.
I am only an enthusiast but my recent successes have given me apetite for more...
I keep reading forums and trying to solve most of my problems myself but I have faced another one now and thought that maybe you could give me another tip on where to look for the issue:
I still have one problem with my L2TP VPN config - I have configured split tunnel on the group policy to tunnel only 192.168.1.0 network requests.
access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
My network at home is 192.168.2.0 but it still tunnels everything (when I check my ip after connecting to VPN my home laptop still identifies with ASA gateway(!) address .
access-list outside_access_in extended permit icmp any interface outside object-group DM_INLINE_ICMP_1
access-list outside_access_in extended permit tcp any interface outside object-group DM_INLINE_TCP_1
access-list outside_access_in extended permit tcp any interface outside eq smtp
access-list outside_access_in extended permit tcp any interface outside eq 8080
access-list outside_access_in extended permit tcp any interface outside eq 23456
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 object-group DM_INLINE_NETWORK_1 any
access-list outside_access_in extended permit tcp any interface outside eq 13000
access-list outside_access_in extended permit tcp any interface outside range 8001 8016
access-list outside_access_in extended permit tcp x.x.x.x 255.255.255.0 interface outside eq ssh
access-list inside_nat0_outbound extended permit ip any 192.168.1.240 255.255.255.240
access-list inside_nat0_outbound extended permit ip any PBXVOIP-network 255.255.255.0
access-list inside_nat0_outbound extended permit ip any PBXCUE-network 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 igolomska-network 255.255.255.0
access-list inside_access_in extended permit udp object-group DM_INLINE_NETWORK_2 any object-group DM_INLINE_UDP_1
access-list inside_access_in extended permit ip host IIS any
access-list inside_access_in extended permit ip any any
access-list inside_access_in extended permit ip host RBSTORE_NAS any
access-list inside_access_in extended deny udp any any object-group DM_INLINE_UDP_2
access-list inside_access_in extended permit tcp any any eq 5432
access-list inside_access_in extended permit tcp any host PBXCUE eq www
access-list inside_access_in extended permit tcp host PBXCUE any eq www
access-list inside_access_in extended permit tcp host RBCAMSTORE_NAS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RBSTORE_NAS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RENBETUPS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RenBetPBX host EXCH-MBX eq smtp
access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 igolomska-network 255.255.255.0
route print shows:
and 192.168.1.240 is my VPN IP - its metric has higher priority than the local gateway.
How do I change it?
Active Routes:
Network Destination        Netmask          Gateway       Interface Metric
          0.0.0.0          0.0.0.0      192.168.2.1    192.168.2.126   4250
          0.0.0.0          0.0.0.0         On-link     192.168.1.240     21
      80.51.24.22 255.255.255.255      192.168.2.1    192.168.2.126   4251
        127.0.0.0        255.0.0.0         On-link         127.0.0.1   4531
        127.0.0.1 255.255.255.255         On-link         127.0.0.1   4531
127.255.255.255 255.255.255.255         On-link         127.0.0.1   4531
      169.254.0.0      255.255.0.0         On-link     192.168.2.126   4506
169.254.104.126 255.255.255.255         On-link     192.168.2.126   4506
169.254.255.255 255.255.255.255         On-link     192.168.2.126   4506
    192.168.1.240 255.255.255.255         On-link     192.168.1.240    276
      192.168.2.0    255.255.255.0         On-link     192.168.2.126   4506
    192.168.2.126 255.255.255.255         On-link     192.168.2.126   4506
    192.168.2.255 255.255.255.255         On-link     192.168.2.126   4506
        224.0.0.0        240.0.0.0         On-link         127.0.0.1   4531
        224.0.0.0        240.0.0.0         On-link     192.168.2.126   4506
        224.0.0.0        240.0.0.0         On-link     192.168.1.240     21
255.255.255.255 255.255.255.255         On-link         127.0.0.1   4531
255.255.255.255 255.255.255.255         On-link     192.168.2.126   4506
255.255.255.255 255.255.255.255         On-link     192.168.1.240    276
===========================================================================
I am starting to feel like I am using a bit too much of your friendliness ...
Best Regards and have a great day!
Lukasz

Src\Marker\Markers Problem

My teacher has intrusted me with finding out what is wrong with the Premeire elements 7.0.
Whenever one student puts two or more videos in the timeline, and opens the clip menu a window opens saying " premiere elements has encountered an error [..\.\Src\Marker\Marker.cpp-187]" and closes.
I have found a similar problem twice on the Internet, but we don't use Vista, it is a Movie Clip file, and was filmed with a Sony Handycam Camcorder, and re-installing does not help!
Any help would be apprecated. Thx

Thank you for responding
I forgot the pass for my past email and account
Anyway, the computer is part of a network, when I try to find out the type of movie it just says "movie clip file".
The computer is Windows XP.
The student is only using video he recorded using the Sony camcorder.
The program has been re-installed twice already, and works fine on all the other computers, and is up to date with all updates, even if the update is not necessary.
The student is also trying to reverse the video by going to clip, and time stretch.
That's the whole schpeel.

IWork documents don't move to iCloud/syncing problem

I was creating the document in Numbers and wanted to share it. After I tried to share (iCloud link), it gaves me a message: This spreadsheet is still being moved to iCloud. Wait for the move to complete, then try sharing again... Then I checked my other docs and it hasn't been syncing the documents for last 3-4 days. It seems, that something happened last update 10.9.2... I remember having the same problem after installing Mavericks for a first time. Then I foun solution in internet... I had to delete some file in Library/ ... but I can't remember it anymore and I cant find the asnwer anymore...please ... help...

Several users have found that going to Settings > General > Reset > Reset All Settings fixes this issue.

A Movie in a Window Problem

Hi All,
I have runned into another problem with my project that i
wonder if anyone can help me out. I have a movie in a window that
opens in my main project with a simple text-phrase (e.g., say
something). I want when the user clicks on this text phrase to
activate a spcified lingo script into my main movie. I have set up
the whole thing as follows
on prepareMovie
global gDemo
set gDemo to movie ("Greek-English_Non-AIML_Scenario.dir")
---Greek-English-Non-AIML_scenario is my main movie in which
the movie in a window opens
The script of the text-phrase is
on mouseUp
global gDemo
tell gDemo to switchToA
---switchToA is the script that i want to activate in my main
movie
end
I get the following error
"Script error can not perform tell void "
Any idea what is going on?
Many thanks for all your valuable help so far

It appears that sending messages from the main movie to the
MIAW works fine, but i can not figure out the vice verca.
Any ideas will be welcomed
Please help
Thanks

Timeline - Cannot Move Tracks and Display Problem

I've created about a ten-minute timeline that I'd really prefer not to toss out because a lot of work went into creating parts of it and getting the timing right with the music, etc. When I first open the project in Premiere Elements, everything seems okay - my timeline plays with all transitions and I can scroll around in the timeline. However, I appear to have done something where whenever I click and drag to try to move a track, the timeline goes insane. I get a circle with a line through it for a cursor and a blank tooltip window, whether I try to drag the track horizontally or vertically. After that, while the timeline will still play, the timeline itself gets all wonky in its display, almost as if the video isn't refreshing on it. (It's kind of like the timeline has crashed.) I attached a screenshot of what it looks like. Whenever I move my cursor to the edge of the timeline, the timeline scrolls in that direction.
I'm running Premiere Elements 7 Educational Version on a Core 2 Duo laptop with 3GB RAM, an Intel 965 graphics chip (latest Intel drivers are installed), and Vista Business 32-bit. The clips are from a standard DV cam (not HD), and there are some PNG format stills and MP3 sounds mixed in there as well. There are three active A/V tracks. I think that's all the relevant information, but ask me if you need more.
Can anyone tell me what I've done and/or how to fix this?

Good morning every one!
The bad news: As expected the problem does still occur. The good news: I was able to track it down to one clip in the timeline.
To save others time, I will described what I have evaluated quite detailed in the following paragraphs...
As it seemed to me that deactivating the Windows indexing service made the usage of PrE more stable I thought that maybe file locks would cause the trouble. So I verified this by opening the project in PrE, writing and executing a small Java application that puts an exclusive file lock on one of the files from the project and tried to move the according clip in the timeline. It worked without any problems and the known symptoms did not occur. So we can put aside the file locks.
Afterwards I tried to reproduce the problem by playing around with the scene that caused problems last week. I tried by moving around the video clips and the problem did not occur. Then I remembered my statement I have made earlier, that the problems seemed to occur as I started to work with titles and music clips -- and bingo: I have three music clips in my "soundtrack" track and one of them seems to cause the whole trouble. After I have clicked on this specific music clip, the problem occurs and it is no longer possible to move anything in the timeline and the strange behaviour regarding the automatic scrolling when the cursor is at the left/right etch is activated.
It was easily reproducable: Restart PrE, open my project, move a video clip to verify that moving clips works, click on the specific music clip and the problem occurs. I have tried this several times and each time the problem occured. When I clicked on one of my other two music clips everything was fine -- same for the video clips I tried. So in my case it seems to be this single clip.
OK, what's specific regarding this clip: All my music files are placed on a share on my Windows home server (in contrast to the video footage which is located on the local HD). So I moved the "dangerous" music file to the local HD, changed the path to the file with a text editor directly in the PrE project file (which is a simple XML file) and started up PrE again. I verified that PrE takes the file from the local HD (server was down), but the problem did still occur. So it is not a network issue.
The next specific thing is, that this music file is the only file in my project which is a .wma-file -- the others are .mp3-files. So I did three things:
At first I downloaded the project file provided by SQFreak2 in this thread and checked whether he is also using .wma-files. The result: He does not use them.
As the second thing I again changed my project file in the text editor: I changed the path of the music clip to some other .mp3-file. Afterwards I opened up PrE with that project file, used the playback to verify that the other music file is referenced by the clip instead of the original wma-file and then tried to move the clip -- again the symptoms occured.
As the last step I created a new project, added the "problematic" wma-file, placed it on the "soundtrack" track and afterwards tried to move it. The result: No problems at all.
So it neither seems to be a generic problem with wma-files nor does it seem to be a file-specific problem at all.
Lets summarize the things from above: File locks do not cause any trouble. In my project a single audio clip seems to cause the problem. The problem seems to be caused by the clip and not the file referenced by the clip (no matter whether local or server based, wma or mp3, the problem occurs in every case).
What I have learned? Well, I am not sure. But in the meanwhile I am quite sure, that it hasn't to do anything with hardware and drivers, but that we are dealing with a bug in PrE that occurs in specific project cirumstances.
This morning I have got some additional ideas I would like to try to track the problem down (e.g. the problematic clip has a transition for a fade out in the end [when I did this I didn't knew, that a fade out could be easily achieved in the clip's properties] -- I will try to remove this one and look what will happen).
P.S.: In one of my earlier posts I stated the assumption that the problem occurs as soon as I move the mouse cursor over the vertical scroll bar of the timeline -- but this is definitely not the case.

QuickTime 7 Upgrade and Windows Movie Maker v6 Audio Problem

Since ITunes up graded my quick time player to the latest version I can no longer add audio to my movies made on Windows Movie Maker version 6. The application crashes. Uninstalling Quick Time player seven and installing Quick Time Player 6 solves the problem but I loose the use of ITunes. I have included the crash information how do I correct this issue.
Problem Event Name: APPCRASH
Application Name: MOVIEMK.exe
Application Version: 6.0.6000.16386
Application Timestamp: 4549b5b6
Fault Module Name: QuickTimeAudioSupport.qtx
Fault Module Version: 7.6.3.0
Fault Module Timestamp: 4837d2d4
Exception Code: c0000005
Exception Offset: 0013e9e2
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160

Any updates on this?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Movie Embedded in PDF Problem

I'm not sure what forum this problem would fall under. I'm having a problem getting a movie to play within a PDF when using Internet Explorer. It plays fine on other browsers. The movie is a large file which makes the PDF pretty large. Is there a way to reduce the size of the movie file to make the PDF smaller? Or is the size of the movie/PDF not the issue? I'm not adept at using movie files or putting PDFs on the Web - so maybe there's a simple solution that I'm missing? Thanks for any help you can provide.

If she were really viewing it in Adobe Reader X, there should be no problem viewing an embedded FLV file.
I did a blog posting about this on InDesignSecrets.com:
http://indesignsecrets.com/picking-the-best-video-format-for-digital-publishing.php
In that blog posting, I quote Dave Merchant, Acrobat guru:
If you embed a video file into a PDF page using Acrobat X Pro, the only formats it will permit are Flash or H.264. The resulting object is called a Rich Media Annotation (RMA), and plays using the embedded copy of Flash Player when viewed in Adobe Reader 9+ or Acrobat 9+. It does not use any external software whatsoever, and will play back identically on Windows and Mac. Even if you have the standalone Flash Player installed on your computer, it will not be used. This ensures the highest possible levels of security, and a guaranteed user experience when viewing PDFs with the Adobe Acrobat Family. There is certainly no bias between Windows and Mac; in fact H.264 is so popular precisely because the videos don’t care what platforms they run on.
My hunch is she may really be viewing the file in Apple's Preview application (if it were set up as the default viewer on her computer).

Ctrl-Alt-drag for brushsize also moves Canvas. Bug/problem

Hi, I'm experiencing a weird problem with Adobe Photoshop Version: 12.0.1 on Mac OS 10.6.4 (Macbook Pro).
I've used the ctrl+alt+mousedrag shortcut for changing brush size for some time, but a few days ago it started acting weird. (I have no clue what provoked it)
If I hold ctrl+alt keys down and move my mouse around, the entire canvas follows the mouse (independent on fullscreen) around.
However if I hold ctrl+alt and click once with the left mousebutton before moving the mouse, then keep holding down ctrl+alt it will act as normal and I can use the cursor to get the brush-settings the way I want it without the canvas moving around. But it is still annoying me because this is something I do very often, and thus it is really messing with my workflow.. And I know it hasn't allways been like this.
I've tried dumping the settings file, but not yet a full reinstall as I am hoping there might be a fix for this.
Thanks,
Steffen

Hi, thanks for the reply. I just figured out what is causing this and came back to post it.. You were on the right track!!
I recently downloaded a beta of something called HyperDock (http://hyperdock.bahoom.de).. Disabling that application fixes the issue.
Goodbye hyperdock - welcome back ctrl+alt+drag!
//Edit: Seems there is a setting in hyperdock that I can turn off, so it can run witihout messing with the shortcuts.. It is actually a decent app if you tend to use a lot of windows.

Exporting movie made with bitmaps - problem

Hey mates,
Its REALLY important ill get it done in the next 8 hours, i need to present this somewhere.
so ill really appreciate a quick solution if possible...
i made a scene in a 3d software, and rendered the whole scene to bitmaps frame by frame,
i then imported all these frames to premiere
and when i export it and try to make it a movie,
it plays but when there is motion the frames get stuck and the video keeps playing, as if half the frame of one of the bitmaps got stuck, and the rest is playing or something...
i dont use much premiere and my knowledge in it is really limited.
the movie is made up of 9022 frames, including sound,
the bitmaps are in a resolution of 1024 on 764
so my export res is the same...
is it a problem with the compressor i choose? there are so many, and tbh i have NO idea what each one means, except for divx, and AVI etc
but there are settings for frame rate, and pixel aspect ratio and even bit depth and fields, and i dont know what are the settings best used in my situation of exporting bitmaps... or maybe its not even the settings? no idea...
if anyone can help, PLEASE help me solve this issue, i'm criticaly short on time, i HAVE to present this work today...
p.s
When i exported to uncompressed AVI it was a file of 24GB and it refused to play, the player(s) said its an unknown or unsupported filetype,
and i have zillion of codecs already, i doubt its the problem.
thanks in advance
Avi H

see edit,
and no, there is a custom preset i made once,
no idea whats good in it or what i really changed there, but it worked in the past:
General
Editing mode: Desktop
Timebase: 29.97 fps
Video Settings
Frame size: 1024h 768v (1.000)
Frame rate: 29.97 frames/second
Pixel Aspect Ratio: Square Pixels (1.0)
Fields: Lower Field First
Audio Settings
Sample rate: 48000 samples/second
Capture Format
DV Capture
Video Rendering
Maximum Bit Depth: Off
Preview File Format: Video for Windows
Compressor: Cinepak Codec by Radius
Color depth: Millions of colors
Default Sequence
Total video tracks: 3
Master track type: Stereo
Mono tracks: 0
Stereo tracks: 3
5.1 tracks: 0
Submix mono tracks: 0
Submix stereo tracks: 0
Submix 5.1 tracks: 0

UC_OBJECTS_NOT_CONVERTIBLE - "MOVE src TO dst" problem

Similar Messages

Maybe you are looking for