UCCX Accessing ECC Vars through custom Java

In a UCCX script, how can I access the ECC Vars within custom Java?
I know how to pull them in the UCCX script using the "Get Enterprise Call Info" step. I want to grab all of the ECC key value pairs without knowing how many there are or their names.
I'm new at this so any help would be wonderful thank you.

Hi Lauren,
You are probably better off posting this over in Contact Centre section of the boards
https://supportforums.cisco.com/community/netpro/collaboration-voice-video/contact-center?view=discussions
Cheers!
Rob
"And if I should fall behind
Wait for me" - Springsteen

Similar Messages

UCCX 8.0 Accessing ECC Vars through custom Java

In a UCCX script, how can I access the ECC Vars within custom Java?
I know how to pull them in the UCCX script using the "Get Enterprise Call Info" step. I want to grab all of the ECC key value pairs without knowing how many there are or their names.
I'm new at this so any help would be wonderful thank you.

Lauren Beal wrote:I'm new at this so any help would be wonderful thank you.
I can assure you that your being new to this is not relevant in regards to what you are asking for. I have been doing this a long time, and would bet there is maybe one person on this forum that can answer your question.
Until he answers, I will offer you this:
Instead of trying to access the ECC directly from within the Custom Java, how about storing the data for ECC into a two-dimensional array. Now, you can write your ECC values by accessing the array indices, as well as pass your array into the a method of your custom class. It's a workaround for what you really asked for, but I'm not knowledgeable enough to know that it's even possible.
E.g.,
String[][] my_ecc_data = new String[] {new String {"first_ecc", "value1"}, new String[] {"second_ecc", "value2"}}
Good luck and happy scripting!
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Accessing Active-Directory through a Java Swing Desktop Appl

I have a desktop application in which, I have an options window. In the window, I use a button to access the active directory(address-book) - when I click the button, the active directory window(the way the address book opens in microsoft-outlook) should open.
I wish to know where can I find information to implement this requirement. It would be even better if there's a solution posted!

Find how to do that from the command line. Perhaps there's an executable you can run or something like that. (Note that this is not a Java Programming question but something to do with your operating system.) Then use a ProcessBuilder to do that command-line thing.

Is accessing a servlet through a java client possible.

Is it possible to call a servlets method (say doPost) from a standalone java application?
How can we do this?
I think for connecting to a servlet I would need to create an HTTP Request object and pass it to a specific URL. This is what the browser does. Am I right?

If you only need to make a GET request and receive the generated content without much interaction, URL and HttpURLConnection can do it without too much pain ;-)

Unable to connect to ECC system through stand alone JAVA program using JCO.

Hi All,
I want to connect to ECC system through standalone JAVA program using jco.while executing my java program it is saying that connection refused.
I am getting the error as shown below.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: CMALLC : rc=20 > Co
nnect from SAP gateway to RFC server failed
Connect_PM GWHOST=192.168.10.99, GWSERV=sapgw01, SYSNR=01
LOCATION    SAP-Gateway on host igm501 / sapgw01
ERROR       partner '192.168.10.99:sapgw01' not reached
TIME        Mon Sep 1 15:00:37 2008
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2821
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       239
ERRNO TEXT Connection refused
COUNTER     2
        at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeConnect(Native Method)
        at com.sap.mw.jco.rfc.MiddlewareRFC$Client.connect(MiddlewareRFC.java:11
25)
        at com.sap.mw.jco.JCO$Client.connect(JCO.java:3138)
        at JConnector_frmDesk.<init>(JConnector_frmDesk.java:91)
        at JConnector_frmDesk.main(JConnector_frmDesk.java:141)
I have already configured SAPDP01,SAPGW01 in my services file in windows\system32\drivers\etc\services.
What else i need to do to connect to ECC system through my JAVA program.Please help me in this regard.
Regards,
Ramana.

Hi !
Check this to verify that you are correctly using JCO:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8e7daa90-0201-0010-9499-cd347ffbbf72
Try to give in ashost="/H/saprouter/H/sap".
Regards,
Matias.

Executing WLST scripts through InstallAnyWhere Java code

We are trying to execute WLST scripts (embedded java mode) through custom Java class of the InstallAnywhere. We could not able to succeed in that, gives error "Weblogic.Home" not found. After passing this parameter we got "WLST_offline" class not found. We have included Weblogic.jar & config.jar in the Insatllanywhere Path, now we are getting NPE in readTemplate command.
Suggest us the right way to do so.
Thanks

Typically the environment is set up using a Domain's setDomainEnv.cmd or setDomainEnv.sh scripts, you may want to see if there is anything obvious in the script environment setup that you are missing.

Facing problem to Use a custom Java class in UCCX

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Hi,
We are using Communication manager 7.0.1 and UCCX version 7.0.1(Cisco Unified CCX Premium). We are trying to call a Custom Java class file from UCCX scripting. We have followed the steps mentioned in the guide (How-To: Using a custom Java class in UCCX 5.x (SOAP Example)). See below link.
http://www.avholloway.com/vtools/ipcc/custom-java/soap/
After completed all the steps we have got the variable type SimpleSOAP at script but we did not found it to object constructors or object attributes (plz find the attached screenshots). We will appreciate if you plz guide us to solve the issue.
Thanks
Fakhrul
LEADS Corporation Ltd.

Hello, Fakhrul.
I'm sorry to see you were not able to find the information or help you were looking for here in the Contact Center community forum.
You may be able to find more help through the Cisco Developer Network.
Also, you might want to consider engaging Cisco Advanced Services via your account team to assist with UCCX custom scripting.
Thank you, and good luck.
-Paulo

Access metadata fields through a custom Service Class

Hi all,
I have to create a custom component for Oracle Content Server. I need to access metadata fields from a custom Service Class.
Can you directly access metadata through a java class or to pass parameters (metadata fields) from a web page to java class? How?
Are there other solutions?
Thanks, ale

I'm not sure if I understand exactly what you are after, but here is some information.
If your url is http://someserver/idc/idcplg?IdcService=CUSTOM_SERVERY&Parm1=A&Parm2=B
Then in your java code you can use the binder.getLocal method to get those values.
String strParm1 = binder.getLocal("Parm1");
you may have to use binder or m_binder (depends on the variable name in your specific situation).

Column Not found error while trying to access databse through JSP+Java Bean

I am trying to acees MS Access 2003 db through JSP using Tomcat 5.0.28.The code for accessing the databse is incorporated in the bean.The jsp only calls the particular method of the bean .
Code for Java Bean:
package ActiveViewer;
import java.sql.*;
import java.util.*;
public class CompanyBean
Connection con;
ResultSet rs=null;
Statement st;
     public CompanyBean(){}
     public void connect()
     try
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
System.out.println("Here4");
con=DriverManager.getConnection("jdbc:odbc:activeviewer","","");
     System.out.println("Here1");
     catch (ClassNotFoundException e)
     System.out.println("Could not locate driver.");
catch (SQLException e)
System.out.println("An SQL Exception has occured :: "+e);
     e.printStackTrace();
     catch (Exception e)
System.out.println("An unknown Exception has occured :: "+e);
     e.printStackTrace();
public void disconnect()
     try
     if (con!=null)
con.close();
     catch (SQLException e)
System.out.println("An SQL Exception has occured :: "+e);
     e.printStackTrace();
public ResultSet select(String username)
if(con!=null)
     try
st=con.createStatement();
     rs=st.executeQuery("select * from company where username='" + username + "'");
catch (SQLException e)
System.out.println("An SQL Exception has occured :: "+e);
     e.printStackTrace();
catch (Exception e)
System.out.println("An Exception has occured while retrieving :: "+e);
e.printStackTrace();
else
System.out.println("Connection to database was lost.");
return rs;
The code for JSP that uses the above bean is:
<%@ page language="java" import="java.sql.*,ActiveViewer.* " contentType="text/html"%>
<jsp:useBean id="conn" scope="session" class="ActiveViewer.CompanyBean" />
<html>
<body>
<% String username=request.getParameter("username");
String password=request.getParameter("password");
System.out.println("username:"+username);
System.out.println("password:"+password);
conn.connect();
ResultSet rs=conn.select(username);
System.out.println("Below select ");
while (rs.next())
String dbusername=rs.getString("username");
     String dbpassword=rs.getString("password");
     if(dbusername.equals(username) && dbpassword.equals (password))
{ %> out.println("OK");
          <% }
else { %>Invalid Username and / or Password.
<br>Clickhere to go back to Login Page.
<% }
} %>
</body>
</html>
I get the following error:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Column not found
though the database is not int he same folder as the jsp, the DSN is set correctly to pint to the db location.The jsp does print in stdout file:
Here4 (from connect method above)
Here 1 (from connect method above)
Below Select (from jsp)
This means that the jsp does connect to db but it gives the above error.Also the field name also matches that in the database and data is present in the db too.
All other things like creating package for bean,incorporating the packakage are done.
Can someone please help me with their precious advice?

U're getting this error because there is no field called 'password' in ur database, the field in ur database is named 'cpassword' and not 'password'. So change the statement rs.getString("password"); to rs.getString("cpassword");

Column Not found error while trying to access database through JSP+Java Bea

I am trying to access MS Access 2003 db through JSP using Tomcat 5.0.28.The code for accessing the database is incorporated in the bean.The JSP only calls the particular method of the bean .
Code for Java Bean:
package ActiveViewer;
import java.sql.*;
import java.util.*;
public class CompanyBean
Connection con;
ResultSet rs=null;
Statement st;
public CompanyBean(){}
public void connect()
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
System.out.println("Here4");
con=DriverManager.getConnection("jdbc:odbc:activeviewer","","");
System.out.println("Here1");
catch (ClassNotFoundException e)
System.out.println("Could not locate driver.");
catch (SQLException e)
System.out.println("An SQL Exception has occured :: "+e);
e.printStackTrace();
catch (Exception e)
System.out.println("An unknown Exception has occured :: "+e);
e.printStackTrace();
public void disconnect()
try
if (con!=null)
con.close();
catch (SQLException e)
System.out.println("An SQL Exception has occured :: "+e);
e.printStackTrace();
public ResultSet select(String username)
if(con!=null)
try
st=con.createStatement();
rs=st.executeQuery("select * from company where username='" + username + "'");
catch (SQLException e)
System.out.println("An SQL Exception has occured :: "+e);
e.printStackTrace();
catch (Exception e)
System.out.println("An Exception has occured while retrieving :: "+e);
e.printStackTrace();
else
System.out.println("Connection to database was lost.");
return rs;
The code for JSP that uses the above bean is:
<%@ page language="java" import="java.sql.*,ActiveViewer.* " contentType="text/html"%>
<jsp:useBean id="conn" scope="session" class="ActiveViewer.CompanyBean" />
<html>
<body>
<% String username=request.getParameter("username");
String password=request.getParameter("password");
System.out.println("username:"+username);
System.out.println("password:"+password);
conn.connect();
ResultSet rs=conn.select(username);
System.out.println("Below select ");
while (rs.next())
String dbusername=rs.getString("username");
String dbpassword=rs.getString("password");
if(dbusername.equals(username) && dbpassword.equals (password))
{ %> out.println("OK");
<% }
else { %>Invalid Username and / or Password.
<br>Clickhere to go back to Login Page.
<% }
} %>
</body>
</html>
I get the following error:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Column not found
though the database is not int he same folder as the jsp, the DSN is set correctly to pint to the db location.The jsp does print in stdout file:
Here4 (from connect method above)
Here 1 (from connect method above)
Below Select (from jsp)
This means that the jsp does connect to db but it gives the above error.Also the field name also matches that in the database and data is present in the db too.
All other things like creating package for bean in WEB-INF/classes,incorporating the packakage are done.
Can someone please help me with their precious advice?

Hi, I too have a problem with an SQL exception, the message is Column not found.
I'm using the sun jdbc odbc driver with access.
the first few lines of the stack trace are
sun.jdbc.odbc.JdbcOdbcResultSet.findColumn(JdbcOdbcResultSet.java:1852)
sun.jdbc.odbc.JdbcOdbcResultSet.getInt(JdbcOdbcResultSet.java:603)
net.homeip.sdaniels.MemberBean.ejbFindByUnamePwd(MemberBean.java:127)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
I am of course sure that the column does infact exist. I can insert into the column no problems. the sql looks like this:
SELECT * FROM Members WHERE uName ='Stewart' AND encPwd='�F2C�3��h�1Y�'
Can any one tell me if there is a common cause to this problem?
Thanks

How to access custom JAVA webdynpro application from an iPad?

Hi,
We are trying to access custom JAVA webdynpro application from an iPad, but nothing is opening up from the iPad browser.
What can be the possible reasons for this? Any kind of SICF enablement or opening up of ports in the network?
Any inputs are welcome!!
TIA,
Regards
Deepthi

Hi,
it is possible to show Java Web Dynpro applications on a mobile device in general, but the controls and the ui should be optimized for the mobile device.
Safari devices are not officially supported so far for Mobile Web Dynpro.
Supported are Windows Mobile devices and Blackberry devices. I also got some good results with Symbian devices.
You can find more inforamtion on Mobile Always Connected at:
ht[http://help.sap.com/saphelp_nwce711core/helpdata/en/7d/28fa3e7cb1d861e10000000a114084/content.htm|http://help.sap.com/saphelp_nwce711core/helpdata/en/7d/28fa3e7cb1d861e10000000a114084/content.htm]
Best Regards,
Stefan

Step by Step to access custom Java API in Application Service.

Hi Experts,
I have a situation to access the custom Java API in CAF. The Java API fetches the data from MDM. I need to get the data from that API and and use it in the CAF Application Service layer? Is there a way to access the JAVA API in the Application Service Layer? If so please do help me out. Step by Step solution would be appreciated.
thanks in advance.
Regards
Ketan

Hi Ketan,
You can do it in two ways.
1. You can create your own custom class in the ejbmodule which you can see in the Navigator view.
2. You can have a ear having the custom class. This ear will be in a separate DC and CAF will have dependency to it.
Regards,
Srinivasan Subbiah

Accessing DB2 data through DBLINK in Java program recieves ORA-02063 error

Hello,
Is it posible to access a mainframe DB2 table through a Java JDBC connection utilizing a DBLink / Synonym. Using Toad or SQLDeveloper, I can select the DB2 data just fine. Also, PL/SQL programs can access the data without issues. When I try to select data from the DB2 Table in a Java program, I get ORA-01002: fetch out of sequence -- ORA-02063 preceding line from DB2D errors.
The code I am using to test is:
(Note: TBL_LOC_ADR is the Synonym that points to the Mainfram DB2 table)
public static void main(String[] args) {
          Connection con = null;
          Statement stmt = null;
          String query = "SELECT * FROM tbl_loc_adr";
          ResultSet rs;
          try {
               System.out.println("Getting connection");
               con = BatchDBConnection.getDBConnection();
               TestConnection tc = new TestConnection();
               System.out.println("Creating ps");
               stmt = con.createStatement();
               System.out.println("Calling qds");
               rs = stmt.executeQuery(query);
               System.out.println(" Returned data " );
          } catch (Exception e) {
               System.out.println("Error " + e.getMessage());
               e.printStackTrace();
The error occurs on the rs = stmt.executeQuery(query); line.
Thanks for any input into this error. It's been driving me nuts all day.
Chris

Chris,
What's your oracle version? You might be hitting a bug as identified in this metalkink doc id, see if this helps out. Resolution posted in the metalink by applying patches or confirm that you have applied all the required patches.
Doc ID: 456815.1 ORA-01002 ORA-2063 When Profiling DB2/400 Table Accessed by View via Transparent Gateway for DRDA
Regards

Want to access RESTful Services through Java Program

We are trying to access RESTful Services exposed by Oracle database cloud through our Java code, with authentication enabled for a particular user.
Till now, we have completed below steps:
1) We have a working account with Oracle database cloud (Username – xxx.xxx)
2) We log in using the credentials for above account, and navigate to Oracle Apex ? SQL Workshop ? RESTful Services
3) We create a new “RESTful Service Module” by filling out the details as below:
     Name:                                  SampleTest
     URI Prefix:                            test
     URI Template:                       /getallemp
     Pagination Size:                    25 (kept to default)
     Required Privilege:                 TestGroupPrivilege
     Resource Handler Details:
                Method:              GET
                Source Type:      Query
                Format:               JSON
                Source:               select * from emp
After creating the above module and testing it, it works fine and the data is retrieved in JSON successfully.
The resulting URL for above RESTful Service Module is: https://<HOST_URL>/apex/test/getallemp
Note that “TestGroupPrivilege” is a privilege assigned to the user group “RESTful Services” and the user “xxx.xxx” is a member of “RESTful Services” user group.
4) We are unable to call the RESTful services from Java program. We are passing username and password in request header as basic authentication. But, we are getting: Error 500--Internal Server Error
5) If we change the “Required Privilege” to default i.e. no privileges present on the module, we can get the response through Java code and everything works perfectly fine.
Please suggest us in: How to access RESTful Services through Java code by passing user credentials in HTTP header for authentication. Also let us know if we have to do any settings through Apex, in case we are missing any.
Message was edited by: NeerajGirolkar
- When we are logging in to Oracle cloud on browser and execute the Oracle cloud RESTful service in another tab of same browser, we are able to get the result. But when executed the same RESTful service from a different browser or java program we get internal server error.
- After investigation, we found that when user logs in to oracle database cloud, a cookie is set in browser with name s “OAMAuthnCookie_cstest-domo.db.us1.oraclecloudapps.com:443” and value as some random token. This cookie is passed in the subsequent requests to the RESTful Service calls when using same browser and as a result, we are able to get the results
- In the Java program, we copied the same cookie with random token in the HTTP Request header and we got the proper response from REST APIs.
- It seems that this cookie is created by an Oracle Middleware tool/server called as OAM – Oracle Accounts Manager, which sends the authentication token after successful authentication and creates the cookie.
- We found that the cookie that OAM creates on authentication is exactly in the same format i.e. ‘OAMAuthnCookie_cstest-domo.db.us1.oraclecloudapps.com:443’. So, we are guessing that Oracle cloud uses OAM for authentication. Please refer to following link for same : http://docs.oracle.com/cd/E14571_01/doc.1111/e15478/sso.htm
Can anyone please suggest:
1.     How to provide authentication to Oracle Cloud REST APIs from java program?
2.     How to pass the username and password in Java code to OAM (or how to communicate with OAM using Java) so that we can receive the unique token from OAM. We can use the token in the further requests? 3.     Also in Oracle cloud white papers , it is mentioned that they support OAuth2.0. But we didn’t find any URLs for same. Can anyone please confirm?
Thanks
~ Neeraj Girolkar

Hi Nilesh,
We tried to connect to Oracle Cloud Database using the way you suggested above, but unfortunately it is not working as well.
Can you let us know the authentication process with Oracle Cloud Database? We found in documentation that it uses OAM (Oracle Access Manager) for authentication. Can you tell us a bit about that? That will be extremely helpful.
Thanks,
- Neeraj

WDA accessing MySQL DB through Java Connector

Hi,
Im having some issues to interfacing a web dynpro abap application with a MySQL DB through a java connector connexion.
Here what I want to do:
Doing queries on my MySQL DB after input fields of search criteria and get the results back to display them in the web dyn pro application. (reporting tool-)
Accessing the data of a MySQL Database in my SAP, to avoid a duplication of data.
I would like to know how to send a query to my Java application ?
And how to send the result of this query to the Webdynpro ABAP ?
Whats the best and easiest solution ?
Thanks !

Found my way through JCo Server.
I need an rfc or BAPI that have specific parameters --> a table with several specific fields and several fields for search criteria.
The user enter the search criteria than I send those to my Java server, the Java server retrieve those parameters and perform a SQL query on the MySQL DB. I fill in the table parameter with the result and send the whole table to the abap
How is it possible ?
Thanks !

UCCX Accessing ECC Vars through custom Java

Similar Messages

Maybe you are looking for