Uccx delay action setup issue in CDA

        Hi All,
i am trying to setup a pop up mesg come up for agents in work flow groups under "agent management work flows" for startup event.  but i want that to come up in 60 sec delay. so this require an delay action setup configuration.  which is fine. i setup the following as you can see in the attached pic. it apears the processes event during delay is not working.  either i have it checked or not, it delays/pauses 60 sec.  i want to have the CAD processs events during startup but then after 60 sec , it should display the pop up msg.  system ver is 8.0.2.11005-20 .  do you think i am not doing it right? OR is it a bug?
much appriciated.
thanks
vijay

I had a bit of trouble understanding the exact problem, but I think you are saying that no matter how you configure this to work, the application simply freezes for 60 seconds until the delay timer expires, then the pop up dsiplays, then the agent can actually use CAD.  Is that correct?  If so, then yes, this is how the feature has worked for the rest of us, and we simply don't use it.
Relevant discussion:
https://supportforums.cisco.com/message/3673990#3673990
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Similar Messages

  • AWE Transaction Configuration Event Notification Setup issue

    AWE Transaction Configuration > Event > Notification Setup issue
    On Final Denial Event has Notifications Option set to "Requester" "Both".
    The Email URL is redirecting to the correct Approval Component mentioned under Approval Component in On Final Denial Event
    But the Worklist URL is redirecting to another Component unlike the email URL, it is sending to a different component.
    Why the same notifications via the same Event (On Final Denial) have two different URL's??

    Hi,
    The worklist/notification component is defined on several places, where the "lowest" definition applies for the action being triggered.
    1 AWE Transaction Configuration> Transaction Registry > Default Approval Component
    2 AWE Transaction Configuration > Event
    3 AWE Transaction Configuration > Event > Notification > Template Detail tab
    Be aware that the Notification section in the Transaction Configuration shows 1 row in the grid, where more than 1 row can be defined. Click on the View all to expand the grid and see all notification defined for this event.
    See if above configurations differ in menu, component, page ...
    Regards,
    Hakan

  • Setup issue in oracle projects - classifications link(standard link) is missing in oracle projects page

    Hi Team,
    I have a setup  issue in oracle projects
    I am unable to find the classifications link in oracle projects page.
    Navigation : Go to any projects responsibility-->search for the projects-->click on project -->click on setup Tab : At the bottom of the page, we can see some standard links along with UDA's.
    Here one standard link Classifications is missing.
    Can anybody guide me what setup we need to do get the link.
    Thank you.

    Hi,
    The classifications link is not appearing in your Project's Setup page because, Classifications must have been unchecked in the Project template from which your project has been created. You can find the Project template information by clicking on the Additional Information link in the same Project -setup page. Once you check the classification flag in the concerned Project Template, all future Project creations made out of this template would have the link enabled.
    But for the current project, classification link cannot be enabled.
    Rgds,
    Shan

  • Odd speed dial setup issue

    I am getting an odd speed dial setup issue.  Here are the steps:
    1. Open speed dial setup screen
    2. Tap an open slot
    3. Search for a contact using the keyboard
    4. Click on the contact to select it
    If I do it that way, I am taken back to the speed dial setup screen, but the contact is NOT added to the slot.
    On the other hand, if in step #3, I just scroll down the list of contacts and select a contact, it works just fine.  Seems to be an issue with the search function.  Anyone else have this problem?
    Android v2.2
    System Version.2.3.15.MB810.Verizon.en.US

    The steps that you are taking correct for setting up the speed dial. I have provided a link for additional information. 
    Click here http://motorola-global-portal.custhelp.com/app/answers/detail/a_id/48578/kw/speed+dial/p/30,6720,7500,/session/L3NpZC9zNEEzbVFhaw=

  • Folder Actions Setup- connection failed

    Every time I open Folder Actions Setup I get an error message saying "Connection Failed- Server may no longer exist..." and "Automatically Add to iTunes" is in red. I click ok and it keeps popping up. I've removed that server from my favorites since it no longer exists. It was a MBWE Blue Rings that I had connected to my AEBS. It had my iTunes library on it , but has since been transferred to an external drive connected directly to my MP.
    How do I make it stop? I can't assign any Folder Actions to any folders until this stops!

    Here is the console message:
    5/31/11 11:26:55 AM          Automator[335]          Can not ID UTI for path /Volumes/PUBLIC/Automatically Add to iTunes: The file “Automatically Add to iTunes” couldn’t be opened because there is no such file.

  • HT1595 i can't see my apple tv on my screen? i'm not sure if this is an apple tv issue or a tv setup issue? (although it appears nothing has changed on my tv setup since the last time i used it?)

    i can't see apple tv on my screen? i'm not sure if this is an apple tv issue or a tv setup issue? (although it appears nothing has changed on my tv setup since the last time i used it?)

    As far as the flashing question mark and globe icons are concerned, your computer had lost track of its startup volume and was searching through the possibilities. The globe icon indicates that it is looking for a network to start from and the question mark indicates that it is looking for an OS X volume. To fix this, if you haven't already, go to System Preferences > Startup Disk and reselect your internal HD as the startup volume.
    From what you have described, this issue does seem to have corrected itself, and the faster start up is what one would normally expect. I think that you have absolutely no reason to reinstall your system.

  • AppleScript: how to reinstall "Folder Actions Setup"

    MacBook Air with Yosemite 10.10.3
    Although I can successfully use Script Editor and get AppleScripts to run, the /Applications/AppleScript folder is missing:
    Erins-MacBook-Air:~ Peter$ ls -l /Applications/App*
    /Applications/App Store.app:
    total 0
    drwxr-xr-x  9 root  wheel  306 Apr 11 14:53 Contents
    /Applications/Application Loader.app:
    total 0
    drwxrwxr-x  11 root  admin  374 Sep 16  2014 Contents
    Erins-MacBook-Air:~ Peter$
    I need to run the "Folder Actions Setup" app which is normally in the AppleScript folder.  I have reason to believe it was deleted in an attempt to recover disk space.
    In the app store, I tried to "upgrade" to Yosemite, and I got a message that since I already have Yosemite, I could simply use the "update" feature, but the entire upgrade installer is available if I really wanted to download it. I did that, and I ran through the entire process, which did some things, including changing my desktop image back to the default.  However, I still aint got no AppleScript folder.
    What next?

    Thanks.
    It would be nice if this weren't obsolete:
    https://developer.apple.com/library/mac/documentation/AppleScript/Conceptual/App leScriptLangGuide/reference/ASLR_folder_…
    I'm still learning my way around Folder Actions, but it seems that the GUI "setup" item is pretty minimal.
    If I successfully write a handler script for "on adding items to a folder...", and put it in the right place, apparently I can get everything working by ctrl-clicking the target folder in the Finder, and using the Services context menu to associate the target folder with the script I'm writing.
    This will be a bit obtuse for some people.  Perhaps Hazel fills this need better. 
    But thanks for the info!

  • Folder Actions Setup Missing?

    I'm running Mavericks 10.9.3, and would like to setup some folder actions . I've not done this for some time, but when I went to the Finder, then right-clicked on a folder, no Folder Actions Setup; in fact, doesn't exist anywhere. Maybe there is something else to be installed?

    Didn't know that.
    (I needed to activate it in:
      ->System Preferences->Keyboard->[Shortcuts]->[Services])

  • ICloud OS X email setup issue

    Hi need some help with an iCloud email setup issue that doesn’t seem to have been covered by other posts or the Apple help factsheets.
    Used my old mac.com Apple ID to set up an iCloud account which now shows as having my iMac as a linked device. To use iCloud Mail was prompted to create a new email address which I could do by turning on Mail in iCloud settings.
    I signed into iCloud via my iMac and having deselected default options to use iCloud for Contacts etc arrived at the account page which has the various options on the RHS and my mac.com ID info on the left.
    Ticked the Mail option on the RHS was asked to “choose an iCloud email address” underneath the box where you enter the chosen email address was a note saying “you cannot change your email address after creating it”. When I tried to  set up the new iCloud email address got a prompt saying “you cannot change your email address after creating it”.
    Help!

    You need to know Comcast's settings for incoming and outgoing server when setting up your OSX Mail app. The info should be somewhere on Comcast's help web page.
    lenn

  • Folder Actions Setup

    how can I get to this function?
    Please read...
    posted by  Frank Caggiano
    this should improve performance...
    Right click on the file and select Services from the menu then Folder Actions Setup
    This will open
    Check to see which (if any) folders have actions. If you didn;t turn it on intntionally disable it.

    Hi deltone,
    Although your product information says, "iMac 27", Mac OS X (10.6.8), 2.7 GHz Intel Core i5, 4GB 1333MHz", I'm guessing you are beyond that.   
    Here's why, folder actions have changed places.  Check out this help from others (thanks to Barney-15E, VikingOSX and ChangeAgent).
    Attaching folder action scripts not available i... | Apple Support Communities
    Best Regards,
    Nubz

  • My computer was rebuilt this week and I am in the process of setting up iTunes and have a weird setup issue. The music in my playlists plays but the same song doesn't play from the library. Initially, I opened ITunes while holding down Shift of control.

    My computer was rebuilt this week and I am in the process of setting up iTunes and have a weird setup issue. The music in my playlists plays but the same song doesn't play from the library. Initially, I opened ITunes while holding down Shift of control key.

    Scratch the post above - the musics that plays in the playlist also plays in the library and that is because i forgot that i imported from the cd yesterday. Basically, I see the rest of my music, but it doesnt' play and tells me it can't locate the file though the location in 'perferences' points to the correct location. Getting iTunes to play after a new computer or rebuild is a headache.

  • EDI X12 Version 4060 setup issue in Oracle B2B 10g

    Hi All,
    We are currently encountering some issues in doing Inbound Trading Partner Set-ups to accept Inbound 210 Documents using EDI X12 Version 4060.
    We created an ecs file(only from ST to SE) excluding envelop, doing all the reqd set up in B2B ,keeping "use Default Document definition" box checked (for 210), deploying agreement and all ; we are getting below error:
    +Element ISA12 is a coded list element. Code '00406' is not allowed. Segment ISA is defined in the guideline at position 010.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Position: 12{br}{tab}Characters: 84 through 89+
    any help regarding this welcomed.
    Regards,
    Ravi

    Hi Anuj,
    Yes this problem is coming in 10.1.2 b2b version..steps we have done are mentioned below :
    1. create a new business action -->created a new dcoument protocol with revision 4060
    Now we define the document protocol parameters (here we mentioned ISA & GS qualifier
    & values for the host trading partner) & we leave the interchange ecs file & group ecs file values blank here.
    here we leave these parameter values : Interchange Control Version Number & Version/Release/Industry Identifier Code as Null or blank.
    Next we define Document Type: 210 with revision as 4060 & then attach a new document definition with this
    (here we specify the transaction set ecs & xsd files ( this just has the ST-SE transaction set meaning the ecs
    doesn't have the ISA & GS envelopes here in it( while creating ecs in spec builder we are not Inserting the envelopes in it))
    2. TP definition/setup :
    Here we define the trading partner -- here we define a new operational capability -- here we select the
    business action created in step1.
    Now here we uncheck the option (Use defualt Document Protocol Paramters and mention the interchange & group qualifier & values for this trading partner.
    here we mention Interchange Control Version Number : 00406
    Version/Release/Industry Identifier Code : 004060
    Here also we don't mention anything for interchange ecs file & group ecs file values, we leave these blank/null.
    Also we leave the checkbox for : Use Default document definition as Yes.
    Now could you please review & advise what exactly needs to be done.
    regards

  • Old Iphone setup issues

    I have given old iphone to family member and did a factory reset but its asking for my Apple ID info when she is trying to set up phone. never actually was able to access icloud on old phone due to incorrect email address being stored on phone on Apple ID section. Whenever I tried to reset password to change email address, it must have been sent to incorrect email address which I couldn't access. Now I have new phone Apple helped me change Apple ID to correct email but don't know what to do about old phone which must still have wrong apple id stored. Any help would be greatly appreciated.

    Sorry I wasn't specific enough. Nothing major, but a drop in efficiency since the new iphone was launched. Specifically, (1) items that are deleted on my computer appear as "new unread" on my iphonefor quite some time after the original delete on my Mac. (2) the iphone is slow to get new messages. in the past, it connected immediately when I went to mail and updated each time i went to "mail." Now there is a significant delay before it connects to up date mail, and often I have to initiate such action (3) Frequently, I have to manually delete msgs off my iphone to make it current to my mac. While these are not earth-shaking problems, they all started with the launch of ME and/or the new iPhone. I went to the apple store - they reset it for me, but said they were having problems now with the sync function. Perhaps I need to do someting relative to "ME" to eliminate these issues. But that shouldn't be the case.

  • UCCX Enhanced License upload issues

    I have a site that is under the gun to finish a UCCX migration from 4.0 to 7.0 We put in for the license upgrade using a PAK but when we load it the system tells us that it is not valid to upgrade using this file from "NONE" Generally that section tells you what files you already have if you add a feature license file.
    We opened a case with TAC but in the meantime we loaded an NFR license file so we could start to configure the system. I then found a PAK for 4-5 to 7 for another site that is being closed. When I got that license file back and tried to run the set-up Wizard again, it tells me the new license is not a valid upgrade from Premium and will be ignored.
    Does this mean I will never be able to get off the NFR license? Am I stuck on this license file even if I get my correct one tomorrow or the next day?
    thanks

    Yes, that is correct that you need the 4.x main system license plus the NEW upgrade license, but the main issue here was "What do I do if my system is running incorrect licensing?" And the answer is, you need to reset the flag for the Web GUI to Fresh Install and you need to delete the references to the existing license files. Both actions are done through the Windows on-board support tool accessed via Start-->Run
    I would not recomend doing this the first time without TAC on the line, but if anyone else wants to provide the command you use to access this tool, feel free. It escapes me at the moment.

  • XML Publisher Time out setup issue with load balancer

    I have a single node install of Oracle Apps 12.0.4. When running an XML report, it completes successfully and I can view the XML report by clicking on the "view output" button.
    I have an Oracle Apps 12.0.4 multi-node install with my database and admin tier running on the same box. I also have two app tiers front-ended with a cisco load balancer. In this environment, when I run an XML Report the job completes with a warning. I have reviewed the log file from the Output Post Processor log file and have the below errors.
    [10/14/08 3:40:48 PM] [14736:RT4712865] Executing post-processing actions for request 4712865.
    [10/14/08 3:40:48 PM] [14736:RT4712865] Starting XML Publisher post-processing action.
    [10/14/08 3:40:48 PM] [14736:RT4712865]
    Template code: FNDCPPGD_XML
    Template app: FND
    Language: en
    Territory: US
    Output type: PDF
    [10/14/08 3:44:33 PM] [UNEXPECTED] [14736:RT4712865] java.net.ConnectException: Connection timed out
    at java.net.PlainSocketImpl.socketConnect(Native Method)
    at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
    at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
    at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
    at java.net.Socket.connect(Socket.java:516)
    at java.net.Socket.connect(Socket.java:466)
    at sun.net.NetworkClient.doConnect(NetworkClient.java:157)
    at sun.net.www.http.HttpClient.openServer(HttpClient.java:365)
    at sun.net.www.http.HttpClient.openServer(HttpClient.java:477)
    at sun.net.www.http.HttpClient.<init>(HttpClient.java:214)
    at sun.net.www.http.HttpClient.New(HttpClient.java:287)
    at sun.net.www.http.HttpClient.New(HttpClient.java:299)
    at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:796)
    at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:748)
    at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:673)
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:917)
    at java.net.URL.openStream(URL.java:1007)
    at oracle.apps.fnd.cp.util.RemoteFile.readURL(RemoteFile.java:217)
    at oracle.apps.fnd.cp.util.RemoteFile.transferFile(RemoteFile.java:195)
    at oracle.apps.fnd.cp.util.RemoteFile.transfer(RemoteFile.java:131)
    at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:224)
    at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
    I have double check my tnsnames.ora, opened an SR, researched in Metalink & on the web but am unable to find a resolution. Any help would be appreciated. Thanks!

    we have the same issue. Any workaround so far?

Maybe you are looking for