Ucf file for signal breadboard bb5

I've been using the Xilinx ISE 14.3 and NI Digital Electronics FPGA board and I need to use the FPGA DIGITAL I/O lines placed on the Signal Breadboard Area (BB5)...how can i create my UCF file to use this Digital I/O .??
i really hope you can help me..

I posted a .ucf that maps all of the IO on that board here: http://forums.ni.com/t5/Academic-Hardware-Products-ELVIS/NI-Digital-Electronics-FPGA-Breadboard-s-UC...
Cheers!
TJ G

Similar Messages

DD 5.1 Surround Workflow to create TS file for Digital Cinema

I need a little help.
My objective is to create a test file for digital cinema. The client requires at the end a TS DD 5.1 mpeg HD file....
I have tried creating the project in Premiere CS4, which is straight forward. The issue I have is in the export. I have been using the surcode plugin. The first question I have is in the routing of the channels. I can only seem to create a Premiere project with the layout of L,R,Ls,Rs,C,LSE where as the surcode only gives you the layout option of L,R,C,LSE,Ls,Rs, which I believe is the industry standard...so I have no idea if the plugin will read the channel allocation correctly.
However, my bigger issue is that I'm not able to export a TS file from Premiere. There is an option to do so, but when I try that with the surcode plugin, the media encoder just crahses...
I have been able to create a single 5.1 surround mpeg file from Premiere with the surcode plugin, but its of no use to the client..and I can't think of a way that would turn it into a TS file that would keep the 5.1 DD.
I have many questions, and there are many things I don't understand...so if anybody is able help at all that would be wonderful.
Many thanks

What will be the playback medium of this file? How will you deliver the file? Will the client be playing the file on a computer, or on a Home Theater system? Does the client want, or need, a visual signal, as well, or it just the Audio signal that is important?
The best delivery system that I can think of is to create your material in PrPro in a 5.1 SS Project. Unless the client is looking for just the Audio with no Video, handle the two as separate, in that once your mixing is done, you will Export the Audio as an MPEG file, in the AC3 format, with the DD 5.1 SS encoding from the Minnetonka Audio SurCode DD 5.1 SS plug-in. Export the visual material (Video) as a DV-AVI Type II elemental stream. Go to Encore, and Import the DV-AVI as a Timeline, then the AC3 as an Asset. From the Project Panel, drag the AC3 to the respective Timeline, and author a DVD. You can have menus for navigation, if needed, or just make the single Timeline your First Play, with no Menus. If you want it to Loop, set its End Action back to itself and it'll loop until the user hits Stop. Once the layout is as you wish, you have two choices:
Burn to a DVD disc for delivery, or Burn to Folder. The former will get your 5.1 Audio (and Video) onto a common DVD for play on the computer or in a Home Theater system. The latter will yield the VIDEO_TS folder with the necessary files contained within this folder. The Audio & Video will be in a .VOB format, but will be in MPEG-2 form. Note: this will be a DVD-Video disc, and playable in any DVD player. Whether one hears the Audio in stereo, or in SS, will depend on the capabilities of their playback system. Because it IS a DVD-Video it MUST contain Video. Now, this could be anything you choose, from Titles with instruction, to Black Video (I'd create this for real, rather than rely of purely the systhetic Black Video from Premiere - more on this, if you need it), to abstract patterns of your design, or choosing.
Now, if one needed just the pure MPEG-2 file, outside of the VIDEO-TS structure for playback on a computer only, you could take the .VOB and rename its extension .MPEG, instead of .VOB. Still, the playback channels would be solely dependent on the equipment the file was played on. The software player might figure into this, as well, because it must have the capability to process DD 5.1 SS signals. Check out any software player that your client will be using. If you deliver the DVD-Video disc, mentioned above, a DVD software player will be required. Most computers today come with one, and most of these are DD capable, but again, it depends on the hardware on the computer, and how it's configured, that will determine if one hears the Audio in stereo, or in DD 5.1 SS.
Before I launched off doing anything, other than editing and mixing, I would ask some very specific questions. As Harm points out, there is no TS "file," but a TS "folder." This would be a red flag for me, indicating that the client might be confused, or know just a little and not quite get the full picture. This would dictate to me, that I need to ask some other questions and phrase them in a way that yielded useful info and instructions to me.
1.) Exactly what equipment will you wish to play this material (don't start talking files yet)?
2.) Is this equipment capable of playing Dolby Digital 5.1 Surround Sound?
From the answers to those two questions, you can then start filling in the blanks.
If the client wants something to drop into a DVD player, hooked up to a DD 5.1 SS capable system, then you’re home free. If they want something that will play on a computer, Ask these questions:
1.) What computer software will you use to play this material (still no mention of file)?
2.) Is the computer equipped for DD 5.1 SS decoding and playback?
These answers will direct you even more. If you get proper answers of, say CyberLink PowerDVD of #1 and "yes," for #2, go on to the next set of questions:
1.) Can I deliver this material on a DVD-Video (the format and medium of commercial DVD’s)? Note: this will be a DVD that will play on a computer with proper software, or a Home Theater system, and will contain both Video and Audio. The client can turn the TV, or .computer’s monitor off, if they do not wish to view any Video signal, or you can create Black Video so there is nothing to see. With this delivery format, there has to be a Video stream, but it can be black.
2.) Can I deliver this material on a Data DVD? Point out that a Data DVD will only play on a computer and not on a set-top player through the TV and a Home Theater’s Audio system. Some people do not know the difference, and you cannot trust your client to, unless you specifically ask them.
If the answer to #1 is "no," and the answer to #2 is "yes," go on to the next question:
If I deliver this material to you on a Datat DVD, will an MPEG-2 file with DD 5.1 SS be acceptable? If so, I'd still do the Burn to folder to get the .VOB and rename it to .MPEG. Test this file on your system. A .VOB can contain a lot of things, but yours was created with no Menu or other material, so it should be just the pure .MPEG-2 file. Still, test, before you deliver.
Now, on the off chance that your client needs something like an SACD, or DVD-Audio, you will be shopping for software. Before you do, I’d post to the Adobe Encore forum and ask Neil Wilkes for his suggestions for the creation of DVD-Audio discs. Believe every word he types and follow his recommendations to the letter.
Good luck, and if you need more detail, or other suggestions after you query your client, please ask,
Hunt
[Edit] I see that you also mention "HD." This will mean either a BD (Blu-ray Disc) for delivery, or a BD folder, Burned to a DVD-Video. If you will have HD Video material, your best going the full BD route. If you only will have Audio, the "HD" will not come into play. What exactly do you mean with the term "HD?" This can make a world of difference.
[Edit 2] Sorry about the formatting in the second paragraph. I cannot seem to get it to display properly, though it looks perfect in the editing screen.

SP601 ucf file syntax error

Hi,
I am new to using Spartan 6 or the ISE environment in general. I'm trying to implement a simple VHDL design on my SP601 evaluation kit and included the SP601_RevC_annotated_master_ucf_8-28-09 file as the constraint file. However, during the "transflate" phase, I get error messages for every line of the ucf file that the previous line was not terminated in a semicolon
I don't see what the problem is....for example, here are the first block of lines, each of which is causing a syntax error.
NET "DDR2_A0" LOC = "J7"; | IOSTANDARD = SSTL18_II ; ## M8 on U2
NET "DDR2_A1" LOC = "J6"; | IOSTANDARD = SSTL18_II ; ## M3 on U2
NET "DDR2_A2" LOC = "H5"; | IOSTANDARD = SSTL18_II ; ## M7 on U2
NET "DDR2_A3" LOC = "L7"; | IOSTANDARD = SSTL18_II ; ## N2 on U2
NET "DDR2_A4" LOC = "F3"; | IOSTANDARD = SSTL18_II ; ## N8 on U2
NET "DDR2_A5" LOC = "H4"; | IOSTANDARD = SSTL18_II ; ## N3 on U2
NET "DDR2_A6" LOC = "H3"; | IOSTANDARD = SSTL18_II ; ## N7 on U2
NET "DDR2_A7" LOC = "H6"; | IOSTANDARD = SSTL18_II ; ## P2 on U2
NET "DDR2_A8" LOC = "D2"; | IOSTANDARD = SSTL18_II ; ## P8 on U2
NET "DDR2_A9" LOC = "D1"; | IOSTANDARD = SSTL18_II ; ## P3 on U2
NET "DDR2_A10" LOC = "F4"; | IOSTANDARD = SSTL18_II ; ## M2 on U2
NET "DDR2_A11" LOC = "D3"; | IOSTANDARD = SSTL18_II ; ## P7 on U2
NET "DDR2_A12" LOC = "G6"; | IOSTANDARD = SSTL18_II ; ## R2 on U2
NET "DDR2_BA0" LOC = "F2"; | IOSTANDARD = SSTL18_II ; ## L2 on U2
NET "DDR2_BA1" LOC = "F1"; | IOSTANDARD = SSTL18_II ; ## L3 on U2
NET "DDR2_BA2" LOC = "E1"; | IOSTANDARD = SSTL18_II ; ## L1 on U2
Again, the ucf file is directly copied from the download on the xilinx website. Any thoughts?

remove the semicolon then it should work
NET "DDR2_A0" LOC = "J7" | IOSTANDARD = SSTL18_II ; ## M8 on U2

Where can i find header files for DAQ PPC Library

Hello,
First sorry for my english (I am french so ...)
I try to develope in eVB a PDA application to acquire a signal from a DAQCard-6062E (for PCMCIA), so I download card drivers (http://digital.ni.com/public.nsf/websearch/12704BA4C93584D886256F1E007135AD) but I doesn't find any header files, help files for librarie file (nirplid.dll).
Can you give me some header file (in C or in VB) or maybe a list a functions and parameters of this labrarie.

Hi,
You will find a list of all functions which can be used in LV PDA applications.
Il vous faut le module LAbVIEW PDA pour avoir accés à ces foncitons(ci-joint le lien). Sino, vous pouvez créer votre propre driver.
Salutations,
Isabelle
Ingénieur d'applications
National Instruments France

Sysidcfg file for unattended installation with proper IP addressing

Hi,
I've been running jumpstart installation for several Sunfire V210 and V280Rs. I did use the following sysidcfg file but it's complaining regarding NOT finding Jumpstart Directory and subsequently fails to comply with rules file. Though the ./check verification did gave me a okay signal but the [I guess] ip addressing/subnet mask scheme is causing trouble. I'm in the same subnet. I happened to google a lot on this, almost everyone had problem with ip addresssing and subnet mask. With this current sysidcfg, the system prompted for default route, for once!
Can someone please share a working sysidcfg file for an unattended installation?
# my current sysidcfg file
system_locale=en_US
timezone=US/Central
terminal=sun-cmd
timeserver=localhost
root_password=test
network_interface=bge0 {netmask=255.255.0.0
protocol_ipv6=no}
security_policy=none
name_service=none
Initially I was using following directive; it couldn't find the jumpstart directory. I even tried removing "default_route", didn't help much.
network_interface=bge0 {hostname=test1
                       default_route=10.1.1.253
                       ip_address=10.1.1.1
                       netmask=255.255.0.0
                       protocol_ipv6=no}
Here is my log ...
Starting Solaris installation program...
Searching for JumpStart directory...
Using rules.ok from blade150:/opt/jumpstart.
Checking rules.ok file...
Using profile: profile
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"... <--- Somewhere here it prompted for default route.
Begin script install_begin execution completed.
Processing default locales
- Specifying default locale (en_US.ISO8859-1)
Processing profile
- Selecting cluster (SUNWCXall)
Installing 64-bit Solaris packages
- Selecting locale (en_US.ISO8859-1)
- Selecting all disks
- Configuring boot device
- Configuring / (c0t0d0s0)
- Configuring swap (c0t0d0s1)
- Configuring /mirror (c0t0d0s3)
- Configuring /usr (c0t0d0s4)
- Configuring /var (c0t0d0s5)
- Configuring /opt (c0t0d0s6)
- Configuring /export/home (c0t0d0s7)
- Deselecting unmodified disk (c0t1d0)
Verifying disk configuration
Verifying space allocation
- Total software size: 1363.53 Mbytes
Preparing system for Solaris install
Configuring disk (c0t0d0)
- Creating Solaris disk label (VTOC)
<snip>
After that all worked fine.
In case should you need to see my /etc/bootparam file, here it is ..
# /etc/bootparam
test.testserv.org root=blade150:/opt/jumpstart/Solaris_9/Tools/Boot install=blade150:/opt/jumpstart boottype=:in sysid_config=blade150:/opt/jumpstart install_config=blade150:/opt/jumpstart rootopts=:rsize=32768
Can you please highlight what went wrong?
TIA
Raqueeb Hassan
Bangladesh

Heres the sysidcfg file we use
system_locale=en_AU
terminal=vt100
security_policy=NONE
name_service=DNS {domain_name=anu.edu.au name_server=150.203.1.10,130.56.4.1 search=anu.edu.au}
network_interface=bge0 {hostname=talwood ip_address=130.56.64.131 default_route=130.56.64.1 netmask=255.255.255.0 protocol_ipv6=yes}
timeserver=localhost
timezone=Australia/NSW
But it appears similar enough to what your using. But I can assure you that it works correctly.

Why is my iphone 4 constantly searching for signal

My son dropped his iphone at school the other day, and it has been searching for signal ever since. He can send imessages, but cannot make or receive other texts or calls. I have six months left on this contract. What do I do?

Hello sassyklaas, no one likes a broken phone! Let's get to the bottom of this together. Can you first try dialing *228 and choose option 1 if the screen will let you navigate. After this is completed, restart the phone to see if there is a change. If the issue still persists, we can review replacement options. Do you know if the phone has insurance? You can file a claim here: http://bit.ly/1hhpZuv
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Audition 5.5 - Help with .wav files for phone system - making a hold message PC & Mcc

Hello everyone,
I am really frustrated trying to create a .wav file for our phone system and I was hoping someone might have some suggestions as I am new to using Adobe Audition. Our phone system will only accept .wav files for our hold messages but the tricky part is that is can only be a maxiimum streaming bit rate of 64 kbps. Everything we've created under 256 kbps becomes in-audible and I'm really not sure what to do as the current messages sound fantastic. Our current hold message is 35 seconds long and we have another one we are about to do which will be 2 minutes long (uuuugh).
- I've tried first converting the .wav file to an .mp3, lowering the bit rate to 64 kbps, then converting back to .wav but the bit rate goes up to almost 1500 kbps after re-converting.
- I've tried making the track mono, reducing the sample rate to 22k but the size ends up being somewhere between 512 and 768. If I lower the sample rate much further and convert to 8bit, the audio sounds terrible.
- I've also tried using Adobe Media Encoder, Audacity, Hand Brake, OS X Automator and a few other programs all with the same results.
- I've tried re-recording the audio on a handheld .mp3 recorder hoping the initial quality would be less (originally recorded on a PC through Audition with a external mic).
Unfortuantely, the person who used to do these conversions is no longer with the company, never documented the process and all I know is that they used to do this on a Mac. Also, the software that uplaods the files is a Linux based which is out of my area of expertise so I'm not able to tinker with it to make any headway.
** Any sort of suggestion would be greatly aprpeciated as I really don't know much about audio. I've been working on this for 2 weeks now and this is really driving me crazy. **

9ov7 wrote:
Hello everyone,
I am really frustrated trying to create a .wav file for our phone system and I was hoping someone might have some suggestions as I am new to using Adobe Audition. Our phone system will only accept .wav files for our hold messages but the tricky part is that is can only be a maxiimum streaming bit rate of 64 kbps. Everything we've created under 256 kbps becomes in-audible and I'm really not sure what to do as the current messages sound fantastic. Our current hold message is 35 seconds long and we have another one we are about to do which will be 2 minutes long (uuuugh).
- I've tried first converting the .wav file to an .mp3, lowering the bit rate to 64 kbps, then converting back to .wav but the bit rate goes up to almost 1500 kbps after re-converting.
Eugh! Converting to MP3 is absolutely not the thing to do!
- I've tried making the track mono, reducing the sample rate to 22k but the size ends up being somewhere between 512 and 768. If I lower the sample rate much further and convert to 8bit, the audio sounds terrible.
- I've tried re-recording the audio on a handheld .mp3 recorder hoping the initial quality would be less (originally recorded on a PC through Audition with a external mic).
Okay, in reverse order: I know it sounds daft, but actually you want to start with the best recording you can possibly have. You are going to have to reduce its bit rate, but if you reduce a crap signal's bit rate, it inevitably ends up worse than reducing a good signal's one; when you think about that for a moment, it's going to make sense (I hope...).
As for what you need to do - well it's going to have to be a mono file anyway (you haven't got a stereo telephone system), and that will immediately halve the streaming rate, but the other thing you need to bear in mind is that telephones have a limitited bandwidth, and that your sample rate, even at 22k, is going to give you more bandwidth than the system has. If you can reduce it to 8k, it will work fine. This will still give you an upper frequency limit of 4kHz, and that's more than adequate for telephone speech, believe it or not...
The other thing, and this is where I think you may be running into trouble, is that 8 bit streaming is pretty much the norm here. All it does is to increase the noise floor, so that the signal to noise ratio is about 48dB instead of the 96dB it would be with a 16-bit signal. But, to get this to work to your advantage, you have to optimise the audio you are using in the first place. Chances are that you need to compress your recording so that it has a relatively limited dynamic range before reducing it to 8-bit, and then you'll be fine. This is better anyway for telephone systems - there's far less chance of bits of the message being missed because they're too quiet. Also, you don't want massive great peaks in the recording - these just reduce the maximum overall level for the majority of the message sound. So, you need to apply a limiter to get rid of them, leaving the majority of the speech sounding just as good, only louder. All of this you can easily do in Audition - don't need any other software at all.
So, my guess is that the previous maker of your messages knew exactly what he was doing. Yes, he could have documented the basic steps, but he couldn't have been absolutely specific about it because no two recordings are the same. I'll attempt to explain the basic steps in English, but how well you will be able to follow this, I'm not sure...
The basic process I'd go through with the recordings is firstly to normalize them to 0dB, then look at how far down most of the 'green' parts are - this is the bulk of the signal, and where all of the meaning is. Then, you apply a limiter to this so that those green parts don't have peaks sticking out of them. Then, if you need to, normalize again so that the green part moves to the upper part of the waveform space (towards where 0dB is). Then, if you need to, apply compression to the signal so that the level of it sounds about the same all through the message.
Now, when you reduce your signal to mono, 8k, and 8-bit, pretty much everything about the original signal will still be there. That should stream 8-bit words at 8k, making 64k streaming for a single mono channel. This will work fine, but only if you optimise the signal first - otherwise no chance!

Generate xml source file for Oracle Order Capture Print Quote

Hi,
I am new to xml and need to work on creating templates for Print Quote.
I am trying to generate the xml source file for which I enabled the report in system administrator and set the output to XML and assigned to Quoting Reports responsiblity. I then assigned XML Report Publisher to the same responsiblity.
I ran the report (Print Quote) and then I am trying to run the XML Report Publisher but I cannot get the request id in the list of values.
I am able to generate xml source file for other reports like Printed Purchase Order etc.,
The view output for the (Print Quote) report is as follows:
<?xml version="1.0" ?>
- 
<ASOPQTER />
How do I get the xml source file? Or are there seeded templates that I can use to create more templates? Any help would be appreciated. Thanks Ravi

Hi, I am in the same position - did this issue ever ger resolved by anyone. I have done a few XMLP reports successfully now using the Word add-in, but customising the Quote output differs from other standard reports.
If you look at the data definition for Quote it is a 'dummy' definition and has no XML file attached. Does anyone know how I can get the XML format for the report output?
Also the template uses XSL-FO ?!?!?! rather than RTF - not sure how to work with this, the Oracle docs are not very helpful in this regard either.
Has anyone successfully managed to customise the Quote print report? Many thanks,
Roger

Vi error on nfs mount; E212: Can't open file for writing

Hi all,
I've setup a umask of 0 for testing on both NFS client (Centos 5.2) and NFS server (OSX 10.5.5 server).
I can create files as one user and edit/save out as another user w/o issue when directly logged into the server via ARD.
However, when I attempt the same from an NFS mount on a client machine, even as root I get the following error using vi;
"file" E212: Can't open file for writing
Looking at the system.log file on the server, I see;
kernel[0]: add_fsevent: no name hard-link! dropping the event. (event 2 vp == 0xa5db510 (-UNKNOWN-FILE)).
This baffles me. My umask is 0 meaning files I create and attempt to edit as other users are 777, but I cannot save out edits unless I do a wq! in vi. At that point, the owner of the file changes to whomever did the vi.
This isn't just a vi issue as it happens using any editor, but I like to use vi.
Any help is greatly appreciated. Hey, beer is on me!

Hi all,
Thanks for the replies
I've narrowed it down to a Centos client issue.
Everything works fine using other Linux based OS's as clients.
Since we have such a huge investment in Centos, I must figure out a workaround. Apple support wasn't much help as usual however they were very nice.
There usual response is "its unsupported".
If Apple really wants to play in the enterprise of business space, they really need to change there philosophy. I mean telling me that I shouldn't mount home directories via NFS is completely rediculus.
What am I supposed to use then, Samba of AFP? No, I don't think so. No offense to Microsoft but why would I use a Windows based file sharing protocol to mount network shares in a Nix env???

How can multiple files for the same genre be consolidated

I organize my iTunes files in genre folders for easy access. ITunes creates multiple folders for some genres and allows a single (preferred) genre file for other much larger files. How can I consolidate multiple files with the same genre?

Thanks. I've done what you selected. The problem is that despite all files being identified with the same genre, iTunes groups some genres in two separate folders. Thus, I have two "Country" folders, for example. More perplexing is that iTunes groups my largest genre folder, "Jazz", in a single folder.

Help in creation of XML file for IDOC postings

Hi All,
Need help if anyone has knowledge/experience in creating XML files for IDOC processing.
We need to design an input file (in XML format) for creation of IDOCu2019s for purchase Invoices through Interface.
We have an existing input file, which is working correctly. We are trying to modify this existing input file for a new Tax Code (Non-deductible inverse tax liability). This tax code is working fine for manual postings. But, through IDOC, tax postings are not correctly triggering.
Could you please confirm if any one has experience on this, so that I can share more details for resolving.
Thanks & Regards,
Srini

Hello,
you can use CALL TRANSFORMATION id, which will create a exact "print" of the ABAP data into the XML.
If you need to change the structure of XML, you can alter your ABAP structure to match the requirements.
Of course you can create your own XSLT but that is not that easy to describe and nobody will do that for you around here. If you would like to start with XSLT, you´d better start the search.
Regards Otto

How do I save an install file for Photoshop CS6

I need to get an install file for Photoshop CS6 (not CR) that I can use on a Windows PC that, due to security reasons, does
not have access to the internet. In the past I have been able to save the install file for Photoshop and/or Lightroom on my internet connected PC and then move it to the the target PC on a thumb drive or CD. But now with the CC and the new "Adobe Installer" I can't seem to see how to capture the install file.
Please let me know how to do this.
dan

Refer to this:
Direct Download Links for Adobe Software
Mylenium

How to Install Plug-in for PS cs5 to open RAW (.NEF) file for Nikon D810 Camera

I need someone to walk me through how to install a Plug-in for PS cs5 to open RAW (.NEF) file for Nikon D810 Camera.
I haven't used photoshop in ages and I got a new camera. I have been on the phone with Adobe (no help) and spent a couple of hours online trying to figure this out. I'm confused, frustrated and about to throw my computer out the window.
Also, I placed this in the "Photoshop for Beginners" since Photoshop CS5 doesn't appear anymore. I know CS5 is outdated but I spent hundreds of dollars on this program and you would think adobe would still honor its product.
Any guidance is much appreciated.
AJ

Odds are cs5 is too old. If you do a search on my the main Adobe website there is a list of compatible cameras for the last known update to camera raw for cs5.
Each version of Photoshop only gets so many updates for camera raw then it is necessary to upgrade Photoshop to get the next update for camera raw.
So you currently have 4 choices.
1 upgrade Photoshop
2 get Lightroom - latest version
3 get Photoshop elements -latest version
4 get dng converter - this will download the latest version an is the only option that is free.
The dng converter can be found by searching Adobe website.

Error:Unable to reserve .lok file for Integrated WLS server (DefaultServer)

Hi,
I am having jdev 11.1.1.1.0.
Many times I get following error while running my application pages:
Unable to reserve the .lok file for Integrated WLS server (DefaultServer). Typically this is because another instance of this server is already running in the WLS domain.
The only way out is to close jdev, delete system11.1.1.1.33.54.07 folder and open jdev again.
Why is this error dialog shown? Is there any permanent solution?
TIA

Thanks for quick reply!
As suggested in the given thread, I logged into the weblogic console http://127.0.0.1:7101/console/ as 'weblogic' user.
On the left hand side in the 'View changes and restarts' section, no pending changes are shown. It shows following text:
Configuration editing is enabled. Future changes will automatically be activated as you modify, add or delete items in this domain.
Please advise. I can share the application.zip if needed.
Thanks

Oracle error "No message file for" after Upgrade to 10.2.0.5

After upgrade from 9.2.0.8 to 10.2.0.5 i get the following error "No message file for"
(with both Users sidadm and orasid)
Platform AIX 64 bit
The installation und Upgrade with dbua works fine.
DB and SAP runs after the Upgrade.
then I tried
SQL> select xx from v$log;
select xx from v$log
ERROR at line 1:
ORA-00904: Message 904 not found; No message file for produstyle='font-
family:courier' ct=RDBMS,
facility=ORA; arguments: ["XX"]
The Environment is correct,
ORACLE_HOME,ORACLE_SID,PATH,LIBPATH have right Values.
I cant find any failure in Configuration or Install Logs.
So i tried the following:
Copy the complete Directorie /oracle/SID/102_64/rdbms/msg from a
10.2.0.4 Oracle Installation to the 10.2.0.5 home.
the result ist that the Messagefile could be read by Oracle an i get
the ORA-00904
Here the same Query:
SQL> select xx from v$log;
select xx from v$log
ERROR at line 1:
ORA-00904: "XX": invalid identifier
So I do the same procedure with an other System.
I detect:
the Patch 9952230 (SAP_102051_201011/9952230) delivers
both Message Files oraus.msg and oraus.msb which caused the problem.
Has anyone the same Problem?
Are there any other Impacts with wrong Message Files .
I raised a OSS Call, but no answer till today.
best regards
Uwe

I could not find anything is sap notes, but oracle recommends to update binary file oraus.msb in $ORACLE_HOME/rdbms/mesg
Download link:
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=10235783
You can find more details also in:
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=10235783.8
https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=10235783
The problem with this solution. It is not officially released by SAP.

Ucf file for signal breadboard bb5

Similar Messages

Maybe you are looking for